Search

Objective : Distinguishing between an infundibulum and a true aneurysm is clinically important. This study aimed to evaluate whether using source image based new three-dimensional rotational angiography (S-n3DRA) can increase the rate of aneurysm detection and improve distinction between a true aneurysm and an infundibulum.Methods : Twenty-two consecutive patients with 23 lesions, were evaluated by time-of-flight (TOF) magnetic resonance angiography (MRA), S-n3DRA, and digital subtraction angiography (DSA). The data were retrospectively and independently reviewed by two neurointerventionists, and the diagnoses based on TOF MRA, S-n3DRA, and DSA were compared. The diagnostic efficacy (interobserver agreement and diagnostic performance) of S-n3DRA was compared with that of TOF MRA.Results : S-n3DRA showed higher interobserver agreement (κ=0.923) than TOF MRA (κ=0.465) and significantly higher accuracy than MRA in distinguishing an aneurysm from an infundibulum (p=0.0039).Conclusion : Compared to MRA, S-n3DRA could provide better screening accuracy and information for distinguishing an aneurysm from an infundibulum. Therefore, S-n3DRA has the potential to reduce the need for DSA.

Background:Three-dimensional printing is increasingly utilised for congenital heart defect procedural planning. CT or MR datasets are typically used for printing, but similar datasets can be obtained from three-dimensional rotational angiography. We sought to assess the feasibility and accuracy of printing three-dimensional models of CHD from rotational angiography datasets.Methods:Retrospective review of CHD catheterisations using rotational angiography was performed, and patient and procedural details were collected. Imaging data from rotational angiography were segmented, cleaned, and printed with polylactic acid on a Dremel® 3D Idea Builder (Dremel, Mount Prospect, IL, USA). Printing time and materials’ costs were captured. CT scans of printed models were compared objectively to the original virtual models. Two independent, non-interventional paediatric cardiologists provided subjective ratings of the quality and accuracy of the printed models.Results:Rotational angiography data from 15 catheterisations on vascular structures were printed. Median print time was 3.83 hours, and material costs were $2.84. The CT scans of the printed models highly matched with the original digital models (root mean square for Hausdorff distance 0.013 ± 0.003 mesh units). Independent reviewers correctly described 80 and 87% of the models (p = 0.334) and reported high quality and accuracy (5 versus 5, p = NS; κ = 0.615).Conclusion:Imaging data from rotational angiography can be converted into accurate three-dimensional-printed models of CHD. The cost of printing the models was negligible, but the print time was prohibitive for real-time use. As the speed of three-dimensional printing technology increases, novel future applications may allow for printing patient-specific devices based on rotational angiography datasets.

Internal trapping with coils is an established treatment of symptomatic large non-branching thrombosed fusiform vertebral artery aneurysms (VAA). However, when perforators arise near the aneurysm neck, parent artery occlusion has a high risk of causing medullary infarction. As an alternative treatment, we performed short-segment internal trapping of the artery using n-butyl-2-cyanoacrylate (NBCA) and coils (bird's nest trapping). Before treatment, perianeurysmal perforators are carefully detected using high-resolution three-dimensional rotational angiography (3DRA). Double microcatheters are advanced to the distal portion of the aneurysm through a balloon guiding catheter where coils are deployed without tight packing. Then, NBCA is injected into the coil mass, taking care to preserve perforators and significant branches. The same maneuver is repeated in the proximal portion of the aneurysm. Coil placement is avoided within the middle of the aneurysm; however, if necessary, only a small number of coils are placed to prevent worsening of mass effect. Two quinquagenarian males presented with a large thrombosed fusiform VAA that caused symptoms due to mass effect. In each case, perforators arose from the parent artery and short-segment internal trapping with NBCA and coils was performed. Symptoms improved after treatment and follow-up imaging confirmed aneurysm shrinkage with no long-time recurrence. In symptomatic large fusiform VAAs where the distance from the lesion to important perforators is extremely short, internal trapping using a combination of NBCA and coils can be more useful than conventional internal trapping.

Objective: We describe a rare patient with a cavernous sinus dural arteriovenous fistula (CS DAVF) in whom diagnostic rotational angiography (RA) caused sinus arrest and bradycardia. Case Presentation: A 79-year-old woman with no previous history of cardiovascular diseases presented with left oculomotor nerve paresis. Conventional angiography confirmed a bilateral CS DAVF. During a three-dimensional RA (3DRA) examination of the left internal carotid artery, sinus arrest occurred. Subsequently, the use of 3DRA to image the left external carotid artery and the use of cone beam computed tomography (CBCT) to image the left internal and external carotid artery also caused transient sinus bradycardia. Two weeks later, we inserted a temporary transvenous pacemaker and completed the transvenous embolization of the left CS DAVF. The left oculomotor paresis improved without any perioperative complications. Conclusion: RA is a standard radiological modality for the diagnosis of cerebrovascular disease. Although the physical force generated by the injection of the contrast medium at the carotid bifurcation can theoretically cause hemodynamic instability, no previous reports have described sinus arrest or bradycardia in association with diagnostic carotid angiography. The present case demonstrates that 3DRA and CBCT can provoke rare, but serious, incidences of cardiac arrhythmia.

BackgroundIntracranial atherosclerotic disease (ICAD) is globally a major ischaemic stroke subtype with high recurrence. Understanding the morphology of symptomatic ICAD plaques, largely unknown by far, may help identify vulnerable lesions prone to relapse.MethodsWe prospectively recruited patients with acute ischaemic stroke or transient ischaemic attack attributed to high-grade ICAD (60%–99% stenosis). Plaque morphological parameters were assessed in three-dimensional rotational angiography, including surface contour, luminal stenosis, plaque length/thickness, upstream shoulder angulation, axial/longitudinal plaque distribution and presence of adjoining branch atheromatous disease (BAD). We compared morphological features of smooth, irregular and ulcerative plaques and correlated them with cerebral ischaemic lesion load downstream in MRI.ResultsAmong 180 recruited patients (median age=60 years; 63.3% male; median stenosis=75%), plaque contour was smooth (51 (28.3%)), irregular (101 (56.1%)) or ulcerative (28 (15.6%)). Surface ulcers were mostly at proximal (46.4%) and middle one-third (35.7%) of the lesions. Most (84.4%) plaques were eccentric, and half had their maximum thickness over the distal end. Ulcerative lesions were thicker (medians 1.6 vs 1.3 mm; p=0.003), had steeper upstream shoulder angulation (56.2° vs 31.0°; pConclusionsUlcerative intracranial atherosclerotic plaques were associated with vulnerable morphological features and had a higher cumulative infarct load downstream.

Basilar artery perforator aneurysms are very rare and usually present with subarachnoid hemorrhage. High-quality imaging systems with digital subtraction angiography and three-dimensional rotational angiography are crucial for the detection of these posterior circulation vascular lesions, which may still be missed on the initial angiogram. We present the first use of a Flow Re-Direction Endoluminal Device (Microvention, Aliso Viejo, California) for treatment of a ruptured basilar artery perforator aneurysm via snuffbox vascular access and use of cangrelor for antiplatelet management.

Background Stenosis of the total cavopulmonary connection (TCPC), in particular the pulmonary arteries, is common in children with single ventricle physiology. Stenting is an efficient interventional strategy to treat stenosis and optimize TCPC hemodynamics. Methods A retrospective single center study was performed to investigate the prevalence, causes and outcome of TCPC stenosis in children treated with stent implantation guided by three-dimensional rotational angiography (3DRA). Results From September 2011 to February 15th 2021 48 patients received 73 stents at 67 locations in 59 3DRA stent procedures. Median age and weight were 3.6 years (0.0–17.2) and 14.1 ​kg (3.4–70.0), respectively. Left pulmonary artery (LPA) stenosis accounted for 75% of the stenosis and is often caused by retroaortic compression. Adverse events occurred in 6 catheterizations (10.2%). Twenty-one patients (43.8%) underwent 27 reinterventions including planned serial redilation (N ​= ​17), extra stent placement (N ​= ​6), surgery (N ​= ​2), unplanned balloon dilation (N ​= ​1) and stent placement (N ​= ​1) for restenosis by intima proliferation. Conclusion TCPC stenoses, especially of the LPA, are common in children with single ventricle physiology and external compression is one of the main causes. 3DRA safely guides stent interventions as intraprocedural knowledge of possible interactions with surrounding structures are evaluated. Besides it is effective in both short and long term and can be performed in small children. Restenosis by intima proliferation is rare, though repeated redilations are necessary to match stent diameter with patient size.

Step changes in angiographic imaging are not commonplace. Since the move from analogue to digital and flat detector plates, two-dimensional imaging technology has certainly evolved but not jumped forward. Of all the routine imaging techniques used in cardiology, angiography has been the last modality to embrace the third dimension. Although the development of rotational angiography was initially for the benefit of neuroimaging and fusion of cross sectional datasets was aimed at the treatment of descending aortic pathology, interventional physicians in congenital and structural cardiology have immersed themselves in this technology over the last 10 years. Like many disruptive technologies, its introduction has divided opinion. We aimed to explore the mindset of those in the field of interventional cardiology who are driving imaging forward. These structured interviews recorded during the 21st Pediatric and Adult Interventional Cardiac Symposium illustrate the challenges and sticking points as well as giving an insight into the direction of travel for three-dimensional imaging and fusion techniques. Covering a wide range of career development, seniority and experience, the interviewees in this article are probably responsible for the majority of the published literature on invasive three-dimensional imaging in congenital heart disease.

International audience; Perianeurysmal hemodynamics play a vital role in the initiation, growth and rupture of intracranial aneurysms. In vitro investigations of aneurysmal hemodynamics are helpful to visualize and measure blood flow, and aiding surgical planning approaches. Improving in vitro model creation can improve the feasibility and accuracy of hemodynamic investigations and surgical planning, improving clinical value. In this study, in vitro models were created from three-dimensional rotational angiography (3DRA) of six patients harboring intracranial aneurysms using a multi-step process involving 3D printing, index of refraction matching and silicone casting that renders the models transparent for flow visualization. Each model was treated with the same commercially-available, patient-specific, endovascular devices (coils and/or stents). All models were scanned by synchrotron X-ray microtomography to obtain high-resolution imaging of the vessel lumen, aneurysmal sac and endovascular devices. Dimensional accuracy was compared by quantifying the differences between the microtomographic reconstructions of the fabricated phantoms and the original 3DRA obtained during patient treatment. True-scale in vitro flow phantoms were successfully created for all six patients. Optical transparency was verified by using an index of refraction matched working fluid that replicated the mechanical behavior of blood. Synchrotron imaging of vessel lumen, aneurysmal sac and endovascular devices was successfully obtained, and dimensional errors were found to be O(100 μm). The creation of dimensionally-accurate, optically-transparent flow phantoms of patient-specific intracranial aneurysms is feasible using 3D printing technology. Such models may enable in vitro investigations of aneurysmal hemodynamics to aid in treatment planning and outcome prediction to devise optimal patient-specific neurointerventional strategies.

Objective To describe our experiences with a fully equipped high-end digital subtraction angiography (DSA) system within a hybrid operating room (OR). Methods A single-plane DSA system with 3-dimensional rotational angiography, cone-beam computed tomography (CBCT), and real-time navigation software was used in our hybrid OR. Between April 2014 and January 2018, 191 sessions of cerebrovascular procedures were performed in our hybrid OR. After the retrospective review of all cases, the procedures were categorized into three subcategorical procedures : combined endovascular and surgical procedure, complementary rescue procedure during intervention and surgery, and frameless stereotaxic operation. Results Forty-nine of 191 procedures were performed using hybrid techniques. Four cases of blood blister aneurysms and a ruptured posterior inferior cerebellar artery aneurysm were treated using bypass surgery and endovascular trapping. Eight cases of ruptured aneurysm with intracranial hemorrhage (ICH) were treated by partial embolization and surgical clipping. Six cases of ruptured arteriovenous malformation with ICH were treated by Onyx embolization of nidus and subsequent surgical removal of nidus and ICH. Two (5.4%) of the 37 cases of pre-mature rupture during clipping were secured by endovascular coil embolization. In one (0.8%) complicated case of 103 intra-arterial thrombectomy procedures, emergency surgical embolectomy with bypass surgery was performed. In 27 cases of ICH, frameless stereotaxic hematoma aspiration was performed using XperGuide® system (Philips Medical Systems, Best, the Netherlands). All procedures were performed in single sessions without any procedural complications. Conclusion Hybrid OR with a fully equipped DSA system could provide precise and safe treatment strategies for cerebrovascular diseases. Especially, we could suggest a strategy to cope flexibly in complex lesions or unexpected situations in hybrid OR. CBCT with real-time navigation software could augment the usefulness of hybrid OR.

OBJECTIVEIn Gamma Knife radiosurgery (GKS) for arteriovenous malformations (AVMs), CT angiography (CTA), MRI, and digital subtraction angiography (DSA) are generally used to define the nidus. Although the AVM angioarchitecture can be visualized with superior resolution using rotational angiography (RA), the efficacy of integrating RA into the GKS treatment planning process has not been elucidated.METHODSUsing data collected from 25 consecutive patients with AVMs who were treated with GKS at the authors’ institution, two neurosurgeons independently created treatment plans for each patient before and after RA integration. For all patients, MR angiography, contrasted T1 imaging, CTA, DSA, and RA were performed before treatment. The prescription isodose volume before (PIVB) and after (PIVA) RA integration was measured. For reference purposes, a reference target volume (RTV) for each nidus was determined by two other physicians independent of the planning surgeons, and the RTV covered by the PIV (RTVPIV) was established. The undertreated volume ratio (UVR), overtreated volume ratio (OVR), and Paddick’s conformal index (CI), which were calculated as RTVPIV/RTV, RTVPIV/PIV, and (RTVPIV)2/(RTV × PIV), respectively, were measured by each neurosurgeon before and after RA integration, and the surgeons’ values at each point were averaged. Wilcoxon signed-rank tests were used to compare the values obtained before and after RA integration. The percentage change from before to after RA integration was calculated for the average UVR (%ΔUVRave), OVR (%ΔOVRave), and CI (%ΔCIave) in each patient, as ([value after RA integration]/[value before RA integration] − 1) × 100. The relationships between prior histories and these percentage change values were examined using Wilcoxon signed-rank tests.RESULTSThe average values obtained by the two surgeons for the median UVR, OVR, and CI were 0.854, 0.445, and 0.367 before RA integration and 0.882, 0.478, and 0.463 after RA integration, respectively. All variables significantly improved after compared with before RA integration (UVR, p = 0.009; OVR, p < 0.001; CI, p < 0.001). Prior hemorrhage was significantly associated with larger %ΔOVRave (median 20.8% vs 7.2%; p = 0.023) and %ΔCIave (median 33.9% vs 13.8%; p = 0.014), but not %ΔUVRave (median 4.7% vs 4.0%; p = 0.449).CONCLUSIONSIntegrating RA into GKS treatment planning may permit better dose planning owing to clearer visualization of the nidus and, as such, may reduce undertreatment and waste irradiation. Further studies examining whether the observed RA-related improvement in dose planning also improves the radiosurgical outcome are needed.

Background: It was speculated that the alteration of the geometry of the artery might lead to hemodynamic changes of distal arteries. This study was to investigate the hemodynamic changes of distal arterial trees, and to identify the factors accounting for hyperperfusion after the obliteration of large intracranial aneurysms.Methods: We retrospectively reviewed data of 12 patients with intracranial carotid aneurysms. Parametric models with intracranial carotid aneurysm were created. Patient-specific geometries were generated by three-dimensional rotational angiography. To mimic the arterial geometries after complete obliteration of the aneurysms, the aneurysms were virtually removed. The Navier–Stokes equations were solved using ANSYS CFX 14. The average wall shear stress, pressure and flow velocity were measured.Results: Pressure ratio values were significantly higher in A1 segments, M1 segments, and M2 + M3 segments after obliteration of the aneurysms (p = 0.048 in A1 segments, p = 0.017 in M1 segments, p = 0.001 in M2 + M3 segments). Velocity ratio values were significantly higher in M1 segments and M2 + M3 segments after obliteration of the aneurysms (p = 0.047 in M1 segments, p = 0.046 in M2 + M3 segments). The percentage of pressure ratio increase after obliteration of aneurysms was significantly correlated with aneurysmal angle (r = 0.739, p = 0.006 for M2 + M3).Conclusions: The pressure and flow velocity of distal arterial trees became higher after obliteration of aneurysms. The angle between the aneurysm and the parent artery was the factor accounting for pressure increase after treatment.

Compared to computed tomography (CT), three-dimensional rotational angiography (3DRA) presents tomographic images with relatively higher noise due to a lack of imaging projections and a more considerable scatter volume. This paper extends the use of the residual encoder-decoder convolutional neural network (RED-CNN) to denoise 3DRA images with a specific mode of training, where an in-house algorithm was trained using CT images of homogeneity water phantom as target noise level for 3DRA images to refer to. The algorithm was applied to 3DRA images obtained using GE Optima CL323i with CT images from a Siemens Somatom 16 as benchmarks. All 3DRA images were also denoised using the standard block-matching and 3D filtering (BM3D) method as a preliminary comparison. Noise levels were quantified in Hounsfield unit using ImQuest software, while the limiting spatial resolution (10% modulation transfer function, MTF) was determined using Spice-CT plugin of the ImageJ tool. Whereas resulting 3DRA images denoised using BM3D had an average of 22,6% decrease in noise level (from 29,6 HU to 22,9 HU), our method presents an average of 49,0% decrease in noise level (29,6 HU to 15,1 HU) for the same images. The 3DRA images denoised using RED-CNN underwent an increase of spatial resolution (8,2%), while BM3D-denoised images had their 10% MTF reduced by an average of 8,7%. These preliminary results had indicated a potential use of RED-CNN based method to denoise 3DRA images without compromising the spatial resolution.

Aim. To assess procedural and long-term efficacy and safety of two alternative methods for appendage closure, conscious sedation with standard transoesophageal echo and procedure guided by rotational angiography. Background. Demand for appendage closure is increasing, and a reasonable time-response should be given to nonvalvular atrial fibrillation patients not suitable to receive anticoagulation. General anesthesia and the need for an anesthesiologist are limiting factors to improve procedure availability; it is time to introduce simpler approaches. Methods. Single center experience in appendage closure during 9 years, using three different procedural approaches: general anesthesia with echo guidance, conscious sedation with echo guidance, and rotational angiography guidance. Conscious sedation and rotational angiography-guided procedures were performed in the absence of an anesthesiologist. Procedural characteristics and follow-up events were recorded. Results. 260 consecutive appendage closure procedures were reviewed: 155 were performed under general anesthesia (59.6%), 71 were performed with conscious sedation (27.3%), and 34 were rotational angiography guided (13.1%). Device success rate for procedures guided by rotational angiography was significantly lower than that for general anesthesia and conscious sedation (91.2% versus 100% versus 98.6%, p = 0.001 ) because there was a greater need to recapture and change device size. However, final procedural success was high and without difference between approaches (98.8% versus 97.2% versus 100%, for general anesthesia, conscious sedation, and rotational angiography, respectively); with a median follow-up of 17 months (CI 95% 13–23 month) (637.9 patients-year), there was no difference among approaches for thromboembolic (1.3 versus 1.8 versus 1.8) and major bleeding events (3.2 versus 2.8 versus 1.8), respectively. Conclusions. Appendage closure performed, either with conscious sedation with echo guidance or rotational angiography guided, is feasible, with no difference in procedural success and follow-up events compared with general anesthesia and without the limitation of the need for an anesthesiologist on-site.

Introduction: We sought to investigate the net effect of wide area circumferential radiofrequency catheter ablation (WACA) on the atrial (LA) geometry. Methods and results: Seventy-one patients, who underwent a second PVI procedure, after index procedure of point-by-point WACA, for recurrent paroxysmal (n=31) or persistent (n=40) atrial fibrillation (AF) in our center were included. A three-dimension rotational angiography of the left atrium (3D-RA) under rapid ventricular pacing was performed immediately before ablation, at index and repeat ablation in all patients. LA geometry in terms of volume, sphericity and surface were assessed in all patients between first and second PVI. There was a statistical significant reduction of the LA volume (65,6 ± 14 ml/m2 vs 62,2 ± 15 ml/m2, p

Introduction Digital subtraction angiography (DSA) is considered the gold standard for diagnosing intracranial aneurysms. In cases of aneurysmal subarachnoid hemorrhage (aSAH), 3DRA has become standard of care to detect aneurysms and to plan treatment in cases with inconclusive noninvasive imaging. Rerupture during angiography with contrast extravasation is a rare but devastating complication and has a mortality of 50% to 80%. In this case series, we report our experience of aneurysm rerupture as a complication of 3DRA for aSAH. Methods The electronic medical records of eight patients across four separate institutions who underwent 3DRA for evaluation of aneurysm after aSAH were reviewed. Data from patient medical charts and their angiographic procedures were reviewed to assess both clinical and angiographic outcomes. Overall case descriptions and patients’ histories were reviewed and described in detail. Results Of the eight cases reviewed, the mean aneurysm size was 9.7±5.5 mm and the mean Hunt Hess and modified Fisher Score on arrival were 3.5±0.96 and 3.25±0.83 respectively. Injection rate, injection volume, and pressure were 3.6±1.4 mL/s, 21±2.1 mL, and 488±124 psi. Inpatient mortality after aneurysmal rerupture was 37.5% (n=3), with 37.5% (n=3) requiring EVD placement and 50% (n=4) requiring craniectomy. Conclusion This is the first series to report aneurysm rerupture as a complication of 3DRA. Rerupture during 3DRA is a devastating complication that commonly led to patient mortality in our series. Future studies will be needed to further elucidate characteristics of patients associated with 3DRA complications and to compare 3DRA complication rates with other aSAH diagnostic modalities. Disclosures D. Nistal: None. D. Wei: None. J. Mascitelli: None. H. Shoirah: None. R. Starke: None. E. Levy: None. J. Howington: None. J. Mocco: None. T. Oxley: None.

Background High-definition vascular imaging is desirable for treatment planning in Gamma Knife radiosurgery (GKRS; Elekta AB) for brain arteriovenous malformations (BAVMs). Currently, rotational angiography (RA) provides the clearest 3-dimensional visualization of niduses with high spatial resolution; however, its efficacy for GKRS has not been clarified. At our institution, RA has been integrated into GKRS (RA-GKRS) for better treatment planning and outcomes since 2015. Objective To evaluate RA-GKRS outcomes of BAVMs and compare them with conventional GKRS (c-GKRS) outcomes. Methods We retrospectively analyzed the radiosurgical outcomes of 50 BAVMs treated with RA-GKRS compared with the 306 BAVMs treated with c-GKRS. Considering possible differences in the baseline characteristics, we also created propensity score-matched cohorts and compared the radiosurgical outcomes between them to ensure comparability. Results The obliteration time was shorter in the RA-GKRS group (cumulative rate, 88% vs 65% at 4 yr [P = .001]). Multivariate Cox proportional hazards analysis demonstrated that the RA-GKRS group (hazard ratio 2.38, 95% CI 1.58-3.60; P = .001) had a better obliteration rate. The cumulative 4-yr post-GKRS hemorrhage rates were 4.0% and 2.6% in the RA-GKRS and c-GKRS groups, respectively (P = .558). There was a trend toward early post-GKRS signal change in the RA-GKRS group compared with the c-GKRS group (cumulative rate, 38% vs 29% at 2 yr; P = .118). Those results were also confirmed in the matched cohort analyses. Conclusion The integration of RA into GKRS is promising and may provide earlier nidus obliteration.

Simulating blood flow around stents in intracranial aneurysms is important for designing better stents and to personalize and optimize endovascular stenting procedures in the treatment of these aneurysms. However, the main difficulty lies in the generation of acceptable computational grids inside the blood vessels and around the stents. In this paper, a hybrid method that combines body-fitted grid for the vessel walls and adaptive embedded grids for the stent is presented. Also an algorithm to map a particular stent to the parent vessel is described. These approaches tremendously simplify the simulation of blood flow past these devices. The methodology is evaluated with an idealized stented aneurysm under steady flow conditions and demonstrated in various patient-specific cases under physiologic pulsatile flow conditions. These examples show that the methodology can be used with ease in modeling any patient-specific anatomy and using different stent designs. This paves the way for using these techniques during the planning phase of endovascular stenting interventions, particularly for aneurysms that are difficult to treat with coils or by surgical clipping.

Background Dual axis rotational coronary angiography ( DARCA ) reduces radiation exposure during coronary angiography on older x‐ray systems. The purpose of the current study is to quantify patient and staff radiation exposure using DARCA on a modality already equipped with dose‐reducing technology. Additionally, we assessed applicability of 1 dose area product to effective dose conversion factor for both DARCA and conventional coronary angiography ( CCA ) procedures. Methods and Results Twenty patients were examined using DARCA and were compared with 20 age‐, sex‐, and body mass index–matched patients selected from a prior study using CCA on the same x‐ray modality. All irradiation events are simulated using PCXMC ( STUK , Finland) to determine organ and effective doses. Moreover, for DARCA each frame is simulated. Staff dose is measured using active personal dosimeters (DoseAware, Philips Healthcare, The Netherlands). With DARCA , median cumulative dose area product is reduced by 57% (ie, 7.41 versus 17.19 Gy·cm 2 ). Effective dose conversion factors of CCA and DARCA are slightly different, yet this difference is not statistically significant. The occupational dose at physician's chest, leg, and collar level are reduced by 60%, 56%, and 16%, respectively, of which the first 2 reached statistical significance. Median effective dose is reduced from 4.75 mSv in CCA to 2.22 mSv in DARCA procedures, where the latter is further reduced to 1.79 mSv when excluding ventriculography. Conclusions During invasive coronary angiography, DARCA reduces radiation exposure even further toward low‐dose values on a system already equipped with advanced image processing and noise reduction algorithms. For both DARCA and CCA procedures, using 1 effective dose conversion factor of 0.30 mSv·Gy −1 ·cm −2 is feasible.

Background To investigate the discrepancy between two-dimensional digital subtraction angiography and three-dimensional rotational angiography for small (Materials and methods Eight small (Results In all eight cases, the neck images via three-dimensional rotational angiography were larger than two-dimensional-digital subtraction angiography with a mean difference of 0.95 mm. All eight cases analyzed with three-dimensional rotational angiography, but only one case with two-dimensional-digital subtraction angiography were classified as wide-neck aneurysms with dome-to-neck ratio Conclusions Aneurysm neck overestimation with three-dimensional rotational angiography predisposed neuro-interventionalists to more complex treatment techniques. Additional two-dimensional information is crucial for endovascular treatment planning for small cerebral aneurysms.

The accurate and safe delivery of a microcatheter to a targeted shunt pouch is essential for successful transvenous embolization of intracranial dural arteriovenous fistulas. However, complex anatomy and variations in head and neck veins and occluded sinuses can hinder intraprocedural microcatheter delivery. In this study, we introduce an intraprocedural flat panel detector rotational angiography and image fusion technique to aid precise navigation inside the veins and proper placement of the microcatheter in the targeted shunt pouch.

Purpose We aimed to evaluate the utility of and complications associated with the double microcatheter technique for the treatment of wide-necked visceral and renal artery aneurysms (VRAAs). Methods Nine patients (mean age, 58 years; age range, 42-69 years; 4 men, 5 women) with wide-necked VRAAs who underwent treatment with the double microcatheter technique from January 2016 to July 2018 were included in the study. For all patients, anatomical features were confirmed using cone-beam computed tomography (CT) with rotational angiography. The aneurysmal location, size, volume, neck-to-dome ratio, number of coils used, and coil packing density were investigated. Technical success, complications (coil migration and organ ischemia), changes in the complete blood count or serum creatine level, and recurrence were also evaluated. Results Three renal artery aneurysms and 6 splenic artery aneurysms were treated by the double microcatheter technique. The mean size of the aneurysms was 26.09±4.76 mm, mean volume was 6.19±3.69 cm3, and mean neck-to-dome ratio was 1.53±0.24. The number of coils used ranged from 7 to 16. The mean packing density was 11.32%±3.72%. Technical success was achieved in all 9 patients. Renal ischemia occurred in two patients with renal artery aneurysm, one of whom showed minimal scar formation on follow-up CT after infarction. No coil migrations or disease recurrences were observed. Conclusion The double microcatheter technique for the treatment of wide-necked VRAAs appears to be relatively safe and useful. However, complex renal artery aneurysm should be carefully managed in order to prevent infarction.

This paper aims to assess the usability and advantages of three-dimensional rotational angiography (3DRA) in patients with congenital heart disease (CHD) and its application in the cath lab. Up to now, its use in CHD is not widespread or standardized. We analyzed all patients with CHD who underwent a 3DRA at our facility between January 2010 and May 2019. The 3DRAs were evaluated for radiation exposure, contrast dye consumption, diagnostic utility and image quality. We performed 872 3DRAs. 3DRA was used in 67.1% of the cases for interventional procedures and in 32.9% for diagnostic purposes. Two different acquisition programs were applied. The median dose-area product (DAP) for all 872 rotations was 54.1 µGym2 (21.7–147.5 µGym2) and 1.6 ml/kg (0.9–2.07 ml/kg) of contrast dye was used. Diagnostic utility of the generated 3D-model was rated superior to the native 3D angiography in 94% (819/872). 3DRA is an excellent and save diagnostic and interventional tool. However, 3DRA has not become a standard imaging procedure in pediatric cardiology up to now. Effort and advantage seems to be unbalanced, but new less invasive techniques may upgrade this method in future.

Previously, median effective dose (ED) of 1.6 mSv per three-dimensional rotational angiography (3DRA) has been reported. This study evaluated ED and image quality in 3DRA after implementation of a simple dose reduction protocol in pediatric catheterizations. Simple conversion factors between 3DRA ED and readily available parameters at the cathlab were determined. The dose reduction protocol consisted of frame reduction (60–30 frames/s (f/s)), active collimation of the X-ray beam, usage of a readily available low dosage program, and a pre-3DRA run check. EDs were calculated with Monte Carlo PCXMC 2.0. Three observers blindly assessed 3DRA image quality of the dose reduction and normal-dose cohort. Between October 2014 and October 2015, 84 patients (median age 4.3 years) underwent 100 3DRAs with a median ED of 0.54 mSv (0.12–2.2) using the dose reduction protocol. Median ED in the normal-dose cohort (17 3DRAs) was 1.6 mSv (1.2–4.9). Image quality in the dose reduction cohort remained excellent. Correlations between ED and dose area product (DAP) and ED and skin dose were found with a ρ of 0.82 and 0.83, respectively. ED exposure of the entire catheterization was reduced to 2.64 mSv. Introduction of a simple protocol led to 66% dose reduction in 3DRA and 79% in the entire catheterization. 3DRA image quality in this group remained excellent. In 3DRA ED correlates well with DAP and skin dose, parameters readily available at the cathlab. Electronic supplementary material The online version of this article (10.1007/s00246-018-1943-3) contains supplementary material, which is available to authorized users.

Cone-beam rotational angiography enables 3D imaging of the hepatic vasculature and is considered beneficial for guidance of transcatheter arterial chemoembolization procedures. Respiratory motion during the rotational acquisition challenges state-of-the-art reconstruction algorithms as intra-scan motion leads to inconsistencies causing substantial blurring and streaking artifacts in uncompensated reconstructions, suggesting the need for motion correction. We propose an automated method for respiratory motion estimation and compensation based on registration of an initial 3D arterial model to vesselness enhanced 2D projection images. Centerline points of the arterial tree are modeled as B-splines over time, the control point positions of which are optimized using α-expansion moves on graph cuts. This approach naturally allows for the estimation of 3D rigid translations as well as non-rigid deformations. Applied to a pre-clinical and a clinical acquisition, the proposed methods resulted in notable reductions in reprojection error and increased vessel sharpness that are reflected in less streaking and blurring artifact compared to the uncompensated case, implying superior vessel contrast. As the proposed methods are generic, future work will investigate their applicability to related rotational angiography imaging protocols, such as coronary angiography.

Aims Three-dimensional rotational angiography (3DRA) of the left atrium (LA) and the esophagus is a simple and safe method for analyzing the relationship between the esophagus and the LA during catheter ablation of atrial fibrillation. The purpose of this study is to describe the location of the esophagus relative to the LA and mobility of the esophagus during ablation procedure. Methods From 3/2011 to 9/2015, 3DRA of the LA and esophagus was performed in 326 patients before catheter ablation of atrial fibrillation. 3DRAwas performed with visualization of the esophagus via peroral administration of a contrast agent. The positions of the esophagus were determined at the beginning of the procedure, for part of patients also at the end of procedure with contrast esophagography. Results The most frequent position is behind the center of the LA (91 pts., 31.9%) The least frequent position is behind the right pulmonary veins (27 pts., 9.4%). The average shift of the esophagus position was 3.36 ± 2.15 mm, 3.59 ± 2.37 mm and 3.67 ± 3.23 mm for superior, middle and inferior segment resp. Conclusions The position of the esophagus to the LA is highly variable. The most common position of the esophagus relative to the LA is behind the middle and left part of the posterior wall of the LA. The least frequently observed position is behind the right pulmonary veins. No significant position change of esophagus motion from before to after the ablation procedure in the majority (≥95%) of the patients was observed.

Introduction Aneurysms of the vertebrobasilar junction are rare, but when present, they are often associated with fenestration of the basilar artery. Frequently, the endovascular treatment is the first choice due to the complex anatomy of the posterior fossa, which represents a challenge for the open surgical treatment alternative. Case Report A 47-year-old man was admitted to the emergency unit with headache, diplopia, neck pain and mental confusion. The neurological exam showed: score of 15 in the Glasgow coma scale (GCS), no motor or sensitivity deficit, palsy of the left sixth cranial nerve and Hunt-Hess grade III. The computed tomography (CT) scan showed subarachnoid hemorrhage (Fisher III) and hydrocephalus. The patient was submitted to ventricular-peritoneal shunt. A diagnostic angiography was performed with 3D reconstruction, which showed evidence of fenestration of the basilar artery associated with aneurysm in the right vertebrobasilar portion. An aneurysm coil embolization was performed without complications. The patient was discharged 19 days later maintaining diplopia, with paralysis of the left sixth cranial nerve, but without any other complaints or neurological symptoms. Discussion Fenestration of the basilar artery occurs due to failure of fusion of the longitudinal neural arteries in the embryonic period, and it is associated with the formation of aneurysms. The endovascular treatment is the first choice and several techniques are described, including simple coiling, balloon remodeling, stent-assisted coiling, liquid embolic agents and flow diversion devices. The three-dimensional rotational angiography (3DRA) is an extremely helpful tool when planning the best treatment course. Conclusion Fenestrated basilar artery aneurysms are rare and complex vascular diseases and their treatment improved with the advent of the 3D angiography and the development of the endovascular techniques.