Search

The heterogeneous structure that exists in virtually all hydrogels has a significant influence on the resulting strength and toughness. While the internal structure has been observed with electron microscopy, it is difficult to measure the in situ local polymer concentration in the native swollen state. In this study, a modified microelectrode technique (MET) was employed to measure the Donnan potential of a heterogeneous hydrogel with a phase-separated structure. With this method, we succeeded in observing quantitative in situ polymer concentrations ranging from 10.2 mu mol/L to several hundred mmol/L. From the obtained concentration profiles, we could successfully evaluate the internal phase-separated structure with a resolution of less than 0.8 mu m. Using MET, we could estimate the average activity coefficient of the hydrogel, and we found a difference in concentration between the dense and sparse phases. We demonstrate that MET is a powerful method that can locally and quantitatively measure the polyelectrolyte concentration distribution within hydrogels. Furthermore, this method can be applied to cells and organs in vivo due to their similarities with polyelectrolytes. Enabling the in situ determination of the internal structures of biomaterials could have important implications toward the characterization of damaged and diseased tissues on the local scale.

High modulus, toughness, and fatigue resistance are usually difficult to be obtained simultaneously in rubbery materials. Here, we report that by superimposing the nanophase separation structure in double network (DN) elastomers using immiscible polymers, the modulus, fracture energy, and energy release rate of fatigue threshold are enhanced all together by 13, 5, and 5 times, respectively. We reveal that the interplay between the DN structure and the nanophase separation structure brings two effects synergistically: (1) formation of nanoclusters overstresses and homogenizes the sacrificial network, thereby remarkably increasing the modulus and yielding stress and (2) the nanoclusters act as viscoelastic nanofillers dissipating energy and pinning the crack propagation, thereby significantly enhancing toughness and fatigue resistance. This work provides a facile approach to superimpose high-order structures in DN materials for excellent mechanical performance. The clarified synergetic effects should be universal for DN materials made of immiscible polymers. We believe that this work will facilitate more studies on elastomers and gels along this line.

Supermacroporous hydrogels, possessing sponge-like structure and permeability, have drawn significant atten-tion for their bioengineering and biomedical applications. However, their mechanical weakness due to their low-density structure is one of their biggest limitations. This work reports a multi-step cryogelation technique, which does not require special equipment, for preparing tough supermacroporous hydrogels on the basis of the double-network (DN) strategy. The produced supermacroporous DN gels possess interconnected pores with pore sizes of 50–230 μm. They also show a com-pressive modulus of up to ~100 kPa, which is 2- to 4-times higher than that of the corresponding supermacroporous single-network (SN) gels, and compressive strength of up to 1 MPa at 80% compression. The supermacroporous DN cryogels are also stretchable with a work of extension of up to 38 kJ m-3, which is 1 to 2 orders larger than that of the SN cryogels. The high stiffness and stretchability distinguish them from other types of cryogels. Supermacroporous triple-network (TN) gels and DN gels composed of different polymer combinations are also prepared. The technique presented herein is suitable for pre-paring supermacroporous DN gels from various polymers; hence, it is promising in meeting bioengineering and biomedical demands.

Inspired by bone tissues, we mineralized low crystalline hydroxyapatite (HAp) particles in double network (DN) hydrogels, and we observed that the HAp minerals toughen the gels. The contribution of dissipated energy from HAp minerals was over 500% higher than that from the polymer during tensile deformation. We elucidated that the amorphous parts in the HAp minerals break at deformation, acting as energy-dissipative sacrificial bonds. This result implies that not only brittle polymer networks but also minerals can provide sacrificial bonds to toughen soft materials.

Hydrogels are promising materials for several applications, including cell scaffolds and artificial load-bearing substitutes (cartilages, ligaments, tendons, etc.). Direct observation of the nanoscale polymer network of hydrogels is essential in understanding its properties. However, imaging of individual network strands at the molecular level is not achieved yet due to the lack of suitable methods. Herein, for the first time, we developed a novel mineral-staining method and network fixation method for transmission electron microscopy observation to visualize the hydrogel network in its unperturbed conformation with nanometer resolution. Surface network observation indicates that the length of surface dangling chains, which play a major role in friction and wetting, can be estimated from the gel mesh size. Moreover, bulk observations reveals a hierarchical formation mechanism of gel heterogeneity. These observations have the great potential to advance gel science by providing comprehensive perspective that link bulk gel properties with nanoscale.

Soft tissue engineering requires antifouling materials that are biocompatible and mechanically flexible. Conventional hydrogels containing more than 70 wt% water are thus promising antifouling material candidates. However, some hydrogels are difficult to apply in internal body organs because of undesirable protein absorption on their surfaces. Due to the lack of an effective method for observing the true charge densities of hydrogels, the reason why electrostatic interactions dominate protein absorption behavior remains unclear. In this work, we adopt the microelectrode technique (MET) to study the electrical potentials of hydrogels with negative, positive, and neutral potentials and demonstrate the protein absorption behaviors on those hydrogels. The results show that MET is an effective method to obtain the surface charge densities of various hydrogels. Furthermore, the amounts of absorbed proteins on the gels were quantified with respect to the charge densities of the hydrogels. The results indicate that electrostatic absorption is quantitatively dominated by a combination of hydrogel charge density and overall protein charge. Based on the knowledge obtained in this work, the effects of hydrogel surface charges on protein absorption can be better understood. Thus, the results are expected to promote the application of hydrogels in tissue engineering.

The surface of soft solids carries a surface stress that tends to flatten surface profiles. For example, surface features on a soft solid, fabricated by moulding against a stiff-patterned substrate, tend to flatten upon removal from the mould. In this work, we derive a transfer function in an explicit form that, given any initial surface profile, shows how to compute the shape of the corresponding flattened profile. We provide analytical results for several applications including flattening of one-dimensional and two-dimensional periodic structures, qualitative changes to the surface roughness spectrum, and how that strongly influences adhesion.

We have developed a novel hydroxyapatite (HAp)-coated double-network (DN) hydrogel (HAp/DN gel). The purpose of this study was to determine details of the cell and tissue responses around the implanted HAp/DN gel and to determine how quickly and strongly the HAp/DN gel bonds to the bone in a rabbit osteochondral defect model. Immature osteoid tissue was formed in the space between the HAp/DN gel and the bone at 2 weeks, and the osteoid tissue was mineralized at 4 weeks. The push-out load of the HAp/DN gel averaged 37.54 N and 42.15 N at 4 and 12 weeks, respectively, while the push-out load of the DN gel averaged less than 5 N. The bonding area of the HAp/DN gel to the bone was above 80% by 4 weeks, and above 90% at 12 weeks. This study demonstrated that the HAp/DN gel enhanced osseointegration at an early stage after implantation. The presence of nanoscale structures in addition to osseointegration of HAp promoted osteoblast adhesion onto the surface of the HAp/DN gel. The HAp/DN gel has the potential to improve the implant-tissue interface in next-generation orthopaedic implants such as artificial cartilage. Statement of Significance Recent studies have reported the development of various hydrogels that are sufficiently tough for application as soft supporting tissues. However, fixation of hydrogels on bone surfaces with appropriate strength is a great challenge. We have developed a novel, tough hydrogel hybridizing hydroxyapatite (HAp/DN gel), which is directly bondable to the bone. The present study demonstrated that the HAp/DN gel enhanced osseointegration in the early stage after implantation. The presence of nanoscale structures in addition to the osseointegration ability of hydroxyapatite promoted osteoblast adhesion onto the surface of the HAp/DN gel. The HAp/DN gel has the potential to improve the implant-tissue interface in next-generation orthopaedic implants such as artificial cartilage.

On implanting hydroxyapatite-mineralized tough hydrogel into osteochondral defects of rabbits, osteogenesis spontaneously penetrates into the gel matrix owing to the semi-permeablility of the hydrogel. The gradient layer (around 40 μm thick) contributes quite strong bonding of the gel to bone. This is the first success in realizing the robust osteointegration of tough hydrogels, and the method is simple and feasible for practical use.

Tough double network (DN) hydrogels are promising substitutes of soft supporting tissues such as cartilage and ligaments. For such applications, it is indispensable to robustly fix the hydrogels to bones with medically feasible methods. Recently, robustly bonding the DN hydrogels to defected bones of rabbits in vivo has been proved successful. The low crystalline hydroxyapatite (HAp) of calcium-phosphate-hydroxide salt coated on the surface layer of the DN hydrogels induced spontaneous osteogenesis penetrating into the semi-permeable hydrogels to form a gel/bone composite layer. In this work, the 44 Ca isotope-doped HAp/DN hydrogel is implanted in a defect of rabbit femoral bone and the dynamic osteogenesis process at the gel/bone interface is analyzed by tracing the calcium isotope ratio using isotope microscopy. The synthetic HAp hybridized on the surface layer of DN gel dissolves rapidly in the first two weeks by inflammation, and then the immature bone with a gradient structure starts to form in the gel region, reutilizing the dissolved Ca ions. These results reveal, for the first time, that synthetic HAp is reutilized for osteogenesis. These facts help to understand the lifetime of bone absorbable materials and to elucidate the mechanism of spontaneous, non-toxic, but strong fixation of hydrogels to bones.

Mechanically robust hydrogels are promising biomaterials as artificial supportive tissue. These applications require selective and robust bonding of the hydrogels to living tissue. Recently, we achieved strong in vivo bone bonding of a tough double network (DN) hydrogel, a potential material for use as artificial cartilage and tendon, by hybridizing osteoconductive hydroxyapatite (HAp) in the gel surface layer. In this work, we report micro patterning of HAp at the surface of the DN hydrogel for selective osteoconduction. Utilizing the dissolution of HAp in an acidic environment, the soft lithography technique using an acid gel stamp was adopted to form a high-resolution HAp pattern on the gel. The HAp-patterned gel showed well-regulated migration and adhesion of cells in vitro. Moreover, the HAp-patterned gel showed selective and robust bonding to the rabbit bone tissue in vivo. This HAp soft lithography technique allows for simple and quick preparation of tailor-made osteoconductive hydrogels and can be applied to other hydrogels for selective bone bonding. STATEMENT OF SIGNIFICANCE: Hydrogels, preserving large amount of water, have been studied for next-generation artificial soft tissues. However, fixation of hydrogels to living tissue was unsolved issue for clinical application. Recently, we achieved robust bonding of a tough double network gel to bone in vivo by coating of osteoconductive hydroxyapatite in the gel surface layer. For further progress for practical use, we report the micro patterning of HAp at the surface of the DN hydrogel by using soft lithography technique, to perform selective bonding to only objective area without unnecessary coalescence. The HAp lithography technique is simple, quick and non-toxic method to prepare tailor-made osteoconductive hydrogels and has universality of species of hydrogels.

Hydrogel, containing large amount of water inside its polymer network, is one of the most attractive biomaterials, because of its similarities with living tissues such as, high water content, low friction and flexibility. These unique features come from complicated polymer network structure, and until now great effort have been put in to clarify nano scale structure of hydrogel. Especially, many researchers tried to investigate by using scattering techniques. However, scattering data just presents limited information in reciprocal space and “real” polymer network structure is still not well understood due to difficulty on direct observation of hydrogel polymer. In this study, we adopt an idea to stain polymer network by using inhomogeneous nucleation, nucleation starts from the functional group of additive. If we carried out inhomogeneous nucleation in the hydrogel, mineral crystals easily forms complex with hydrogel network and this mineral distribution should represent the original polymer structure. Therefore, the purpose of this study is to stain hydrogel polymer network with mineral and to observe its nano-scale structure by using transmission electron microscope (TEM). Double network hydrogel was synthesized by two step UV radical polymerization.1 2-acrylamido-2-methyl propanesulfonic acid (AMPS), which contains sulfonic functional group, was used for 1st polymer network. Then, mineral bernalite (Fe(OH)3), whose nucleation accelerates by sulfonic group, was mineralized into DN gel. Fig.1 shows TEM image of mineralized DN gel and its schematic image. Nano scale hydrogel polymer network structure was successfully observed and this structure well agreed with previous prediction from neutron scattering method. This is the world’s first direct observation of polymer network. Mineralized crystal size was several nm in diameter, which is same scale of polymer blob. It indicates that we observed mineral crystals surrounded by individual polymer blobs. The detailed results will be presented in conference. In conclusion, we succeeded direct observation of hydrogel polymer network using TEM. This is a very challenging study not only for understanding hydrogel, but also for visualization polymer network, which is one of biggest dream of polymer scientists. References [1] J.P. Gong et al., Advanced Materials, 2003, 15, 1155–1158. Figure 1