Search

The number of diabetic patients is increasing rapidly who have vulnerable feet and might be easily affected by different adversities. Since there is no available footwear sizing system for diabetic patients, manufacturers produce diabetic footwear of different sizes and fittings based on other available footwear sizing systems, which may result in inappropriate fitting. To get footwear with proper fittings, diabetic patients may go for customized or bespoke footwear based on their foot conditions, which is very costly. This study attempts to explore the foot complications of diabetic patients and categorize their feet to create a new sizing system using foot measurements from 102 male diabetic patients based on three dimensions of human feet, namely foot length, ball girth, and instep circumference. K-means data clustering is followed to categorize the data into three broad groups, namely small, medium, and large groups for footwear sizing. The developed footwear sizing system uses a sizing interval of 8 mm and a fitting interval of 6 mm. This study suggests a total of 11 sizes along with 24 different fittings for the footwear manufacturers for producing diabetic footwear. This newly developed footwear sizing system has a total of 79.41 % coverage where there are 10, 10, and 4 fittings in the small, medium, and large groups, respectively. The proposed footwear sizing system can help footwear manufacturers understand the proper size and fit of diabetic patients' feet so that they can make appropriate footwear for diabetic patients economically., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

RNA modifications play an important role in actively controlling recently created formation in cellular regulation mechanisms, which link them to gene expression and protein. The RNA modifications have numerous alterations, presenting broad glimpses of RNA's operations and character. The modification process by the TET enzyme oxidation is the crucial change associated with cytosine hydroxymethylation. The effect of CR is an alteration in specific biochemical ways of the organism, such as gene expression and epigenetic alterations. Traditional laboratory systems that identify 5-hydroxymethylcytosine (5hmC) samples are expensive and time-consuming compared to other methods. To address this challenge, the paper proposed XGB5hmC, a machine learning algorithm based on a robust gradient boosting algorithm (XGBoost), with different residue based formulation methods to identify 5hmC samples. Their results were amalgamated, and six different frequency residue based encoding features were fused to form a hybrid vector in order to enhance model discrimination capabilities. In addition, the proposed model incorporates SHAP (Shapley Additive Explanations) based feature selection to demonstrate model interpretability by highlighting the high contributory features. Among the applied machine learning algorithms, the XGBoost ensemble model using the tenfold cross-validation test achieved improved results than existing state-of-the-art models. Our model reported an accuracy of 89.97%, sensitivity of 87.78%, specificity of 94.45%, F1-score of 0.8934%, and MCC of 0.8764%. This study highlights the potential to provide valuable insights for enhancing medical assessment and treatment protocols, representing a significant advancement in RNA modification analysis., (© 2024. The Author(s).)

The gig economy (temporary, contract, and freelance online jobs rather than permanent positions) is a component of the fourth industrial revolution and preview of future work. The rise of digital platforms has increased career opportunities and income potential, particularly for women. Yet, the sex-disaggregated evidence regarding platform usage, employment characteristics, and working motivations and satisfaction remains untapped. Using data from a quantitative survey of Bangladeshi gig workers (242 men and 201 women) conducted in 2022, this paper addresses these gaps between male and female workers. The gig economy appears to be gender-segregated across digital platform usages and working categories. Women tend to prioritize digital work options for managing multiple responsibilities, while men are often driven by the potential for higher income. This study conceptually utilized the two-factor theory and empirically ordered a probit model to identify gender differences in job satisfaction. Job satisfaction was significantly increased by work-life balance, monthly income, and social-media connection, while an increase in working hours, complexity in payment systems, and unstable networks all led to a decrease in job satisfaction. The findings have implications for the future growth of the gig economy, provide new insights into gender differences in job satisfaction, and underscore the need for gender-sensitive policies in the online labor market., (© 2024. The Author(s).)

The use of quality seeds is crucial to improve rice yield, food security, and farmers' livelihoods. The large informal seed system, limited access to quality seeds, and low seed replacement rate challenge increasing rice yield. Despite robust government initiatives to support the seed system, progress has been slow. Besides, the need for farmers' behavioural change, enhanced coordination, and communication at the local level has not received adequate attention. We investigate rice farmers' preferences for quality seed, packet sizes, types, and sources, and assess the impact of utilizing good quality seed. We collected quantitative data from 1196 rice farmers in northern Bangladesh in 2019. To identify major factors influencing farmers' preferences regarding quality seed, packet sizes, packet types, and seed sources, we employed ordered logit and multinomial logit models. Additionally, we used the propensity score matching procedure to assess the impact of good quality and formal seed sources on the rice yield. The findings revealed that farmers strongly prefer using seeds from formal sources despite limited accessibility. Of the total farmers, 34% use public source seeds, 33% use private source seeds, and the rest rely on their own saved seeds. The use of good quality seeds increased rice yields from the base yield by 0.07-0.28 t/ha. We found about a 48% gap in accessing good-quality seeds, indicating significant potential for scaling up the seed systems. Farmers using formal seed sources yielded 0.03-0.15 t/ha more than informal seed users. Farmers strongly prefer 5 kg packets due to their cost-effectiveness, easy storage, and handling convenience. Additionally, farmers prefer polycoated jute sacks for their versatility, multi-purpose applications, and resistance to pests. The econometric model results showed that farmers' preferences were significantly influenced by gender, farm type, crop yield, seed price, market distance, various stakeholders' advice, and seed supply systems' constraints. The government should implement policies and programs to strengthen a well-connected seed network in rural areas, promoting inclusivity, and enhancing rice productivity. Besides, farmers' needs and preferences should be considered in designing and implementing seed-related initiatives to foster sustainable agricultural development., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Sarkar et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Technological advancements have long played crucial roles in rice productivity and food security in Bangladesh. Seasonal variation over time and regional differences in rice production, however, pose a threat to agricultural sustainability but remain unexplored. We performed a spatial-temporal mapping of rice cultivation area, production, and yield from 2006-2007 to 2019-2020 using secondary data for disaggregating 64 districts in Bangladesh. Growth and multivariate approaches were employed to analyze time-series data. Results showed that Mymensingh had the highest rice cultivated area and production, while Bandarban had the lowest. The 14 years highest average rice yield was found in Gopalganj and Dhaka (3.63 tons/ha), while Patuakhali (1.73 tons/ha) had the lowest. For the Aus, Aman, and Boro, the rice cultivation area in 19 districts, 11 districts, and 13 districts declined significantly. The overall rice production increased significantly in most districts. For the Aus, Aman, and Boro seasons, the rice yield in 54, 50, and 37 districts demonstrated a significant upward trend, respectively. The adoption rate of modern varieties has risen dramatically. However, there are notable variances between regions and seasons. A significant increasing trend in Aus (0.007% to 0.521%), Aman (0.004% to 0.039%), and Boro (0.013% to 0.584%) were observed in 28, 34, and 36 districts, respectively, with an increase of 1% adaptation of HYV. Predictions revealed that rice cultivation area and production of Aus, Aman, and Boro seasons will be increased in most of the regions of Bangladesh by 2030. Based on spatiotemporal cluster analysis, the five identified cluster groupings illustrated that clusters lack spatial cohesion and vary greatly seasonally. This suggests increasing rice production by expanding cultivable land, adopting high-yielding varieties, and integrating faster technological advancement in research and extension. The findings will assist scientists in developing region-specific production technologies and policymakers in designing decentral region-specific policies to ensure the future sustainability of rice production., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Al Mamun et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Micro-energy harvesting (MEH) is a technology of renewable power generation which is a key technology for hosting the future low-powered electronic devices for wireless sensor networks (WSNs) and, the Internet of Things (IoT). Recent technological advancements have given rise to several resources and technologies that are boosting particular facets of society. Many researchers are now interested in studying MEH systems for ultra-low power IoT sensors and WSNs. A comprehensive study of IoT will help to manage a single MEH as a power source for multiple WSNs. The popular database from Scopus was used in this study to perform a review analysis of the MEH system for ultra-low power IoT sensors. All relevant and important literature studies published in this field were statistically analysed using a review analysis method by VOSviewer software, and research gaps, challenges and recommendations of this field were investigated. The findings of the study indicate that there has been an increasing number of literature studies published on the subject of MEH systems for IoT platforms throughout time, particularly from 2013 to 2023. The results demonstrate that 67% of manuscripts highlight problem-solving, modelling and technical overview, simulation, experimental setup and prototype. In observation, 27% of papers are based on bibliometric analysis, systematic review, survey, review and based on case study, and 2% of conference manuscripts are based on modelling, simulation, and review analysis. The top-cited articles are published in 5 different countries and 9 publishers including IEEE 51%, Elsevier 16%, MDPI 10% and others. In addition, several MEH system-related problems and challenges are noted to identify current limitations and research gaps, including technical, modelling, economic, power quality, and environmental concerns. Also, the study offers guidelines and recommendations for the improvement of future MEH technology to increase its energy efficiency, topologies, design, operational performance, and capabilities. This study's detailed information, perceptive analysis, and critical argument are expected to improve MEH research's viable future., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors. Published by Elsevier Ltd.)

In this study, we investigated the spore germination phenotype of Clostridium perfringens strains isolated from diarrheic animals (animal strains). The transcripts of germination-specific genes and their protein products were also measured. Our study found the following results: (i) animal strains spores germinated at a slower rate with AK (mixture of L-asparagine and KCl), L-cysteine, or L-lysine, but the extent of germination varied based on strains and germinants used; (ii) none of the amino acids (excluding L-cysteine and L-lysine) were identified as a universal germinant for spores of animal strains; (iii) animal strain spores germinated better at a pH range of 6.0-7.0; (iv) all tested germination-specific genes were expressed in animal strains; the levels of expression of major germinant receptor gene ( gerKC ) were higher and the cortex hydrolysis machinery genes ( cspB and sleC ) were lower in animal strains, compared to the food poisoning strain SM101; and (v) the levels of CspB and SleC were significantly lower in spores of animal strains compared to strain SM101, suggesting that these animal strains lack an efficient spore cortex hydrolysis machinery. In summary, our findings suggest that the poor or slow spore germination in C. perfringens animal strains might be due to incomplete spore cortex hydrolysis.

Droughts pose a severe environmental risk in countries that rely heavily on agriculture, resulting in heightened levels of concern regarding food security and livelihood enhancement. Bangladesh is highly susceptible to environmental hazards, with droughts further exacerbating the precarious situation for its 170 million inhabitants. Therefore, we are endeavouring to highlight the identification of the relative importance of climatic attributes and the estimation of the seasonal intensity and frequency of droughts in Bangladesh. With a period of forty years (1981-2020) of weather data, sophisticated machine learning (ML) methods were employed to classify 35 agroclimatic regions into dry or wet conditions using nine weather parameters, as determined by the Standardized Precipitation Evapotranspiration Index (SPEI). Out of 24 ML algorithms, the four best ML methods, ranger, bagEarth, support vector machine, and random forest (RF) have been identified for the prediction of multi-scale drought indices. The RF classifier and the Boruta algorithms shows that water balance, precipitation, maximum and minimum temperature have a higher influence on drought intensity and occurrence across Bangladesh. The trend of spatio-temporal analysis indicates, drought intensity has decreased over time, but return time has increased. There was significant variation in changing the spatial nature of drought intensity. Spatially, the drought intensity shifted from the northern to central and southern zones of Bangladesh, which had an adverse impact on crop production and the livelihood of rural and urban households. So, this precise study has important implications for the understanding of drought prediction and how to best mitigate its impacts. Additionally, the study emphasizes the need for better collaboration between relevant stakeholders, such as policymakers, researchers, communities, and local actors, to develop effective adaptation strategies and increase monitoring of weather conditions for the meticulous management of droughts in Bangladesh., (© 2024. The Author(s).)

Cytokines are a protein family comprising interleukins, lymphokines, chemokines, monokines and interferons. They are significant constituents of the immune system, and they act in accordance with specific cytokine inhibiting compounds and receptors for the regulation of immune responses. Cytokine studies have resulted in the establishment of newer therapies which are being utilized for the treatment of several malignant diseases. The advancement of these therapies has occurred from two distinct strategies. The first strategy involves administrating the recombinant and purified cytokines, and the second strategy involves administrating the therapeutics which inhibits harmful effects of endogenous and overexpressed cytokines. Colony stimulating factors and interferons are two exemplary therapeutics of cytokines. An important effect of cytokine receptor antagonist is that they can serve as anti-inflammatory agents by altering the treatments of inflammation disorder, therefore inhibiting the effects of tumour necrosis factor. In this article, we have highlighted the research behind the establishment of cytokines as therapeutics and vaccine adjuvants, their role of immunotolerance, and their limitations., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Nanomaterials (NMs) with structural, optical, and dielectric properties are called functional or smart materials and have favorable applications in various fields of material science and nanotechnology. Pure and Co-doped MgAl 2 O 4 were synthesized by using the sol-gel combustion method. A systematic investigation was carried out to understand the effects of the Co concentration on the crystalline phase, morphology, and optical and dielectric properties of Co-doped MgAl 2 O 4 . X-ray diffraction confirmed the cubic spinel structure with the Fd 3̅ m space group, and there was no impurity phase, while the surface morphology of the samples was investigated by scanning electron microscopy. The dielectric properties of the synthesized material are investigated using an LCR meter with respect to the variation in frequency (1-2 GHz), and their elemental composition has been examined through the energy-dispersive X-ray technique. The existence of the metal-oxygen Mg-Al-O bond has been confirmed by Fourier transform infrared spectroscopy. The value of the dielectric constant decreases with the increasing frequency and Co concentration. The optical behaviors of the Co 2+ -doped MgAl 2 O 4 reveal that the optical properties were enhanced by increasing the cobalt concentration, which ultimately led to a narrower band gap, which make them exquisite and suitable for energy storage applications, especially for super capacitors. This work aims to focus on the effect of cobalt ions in different concentrations on structural, optical, and dielectric properties., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

The low-temperature sintering of (Bi 0.5 Na 0.5 )TiO 3 -based ceramics can be achieved by sintering aid CuO. Piezoelectric ceramics (1 - x )[0.90(Bi 0.5 Na 0.5 )TiO 3 - 0.10SrTiO 3 ] - x CuO (BNT-ST-Cu) with x = 0, 0.01, 0.02, 0.03, and 0.04 were prepared through the mixed oxide route. A tetragonal structure was indexed for the undoped sample. Its structure was found to be changed to a pseudocubic when Cu was added. For undoped Cu samples, the sintering temperature ( T s ) for sufficient densification was 1160 °C. However, T s was reduced to 1090-1120 °C for Cu-added specimens. Field emission scanning electron microscopy (FE-SEM) showed a uniform and dense grain morphology for all samples. The maximum dielectric constant temperature ( T m ) was decreased with the doping concentration of Cu and applied frequency. The strain was increased with Cu concentration and had the maximum value of 500 pm/V for the sample x = 0.02 with symmetric and slim strain loops., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Spore germination plays an essential role in the pathogenesis of Clostridium perfringens -associated food poisoning. Germination is initiated when bacterial spores sense various stimuli, including chemicals and enzymes. A previous study showed that dipicolinic acid (DPA) chelated with calcium (Ca-DPA) significantly stimulated spore germination in C. perfringens . However, whether Ca 2+ or DPA alone can induce germination is unknown. Therefore, we aimed to evaluate the possible roles of Ca 2+ and other divalent cations present in the spore core, such as Mn 2+ and Mg 2+ , in C. perfringens spore germination. Our study demonstrated that (i) Ca-DPA, but not DPA alone, induced C. perfringens spore germination, suggesting that Ca 2+ might play a signaling role; (ii) all tested calcium salts induced spore germination, indicating that Ca 2+ is critical for germination; (iii) the spore-specific divalent cations Mn 2+ and Mg 2+ , but not Zn 2+ , induced spore germination, suggesting that spore core-specific divalent cations are involved in C. perfringens spore germination; and (iv) endogenous Ca 2+ and Mg 2+ are not required for induction of C. perfringens spore germination, whereas exogenous and partly endogenous Mn 2+ are required. Collectively, our results suggest that exogenous spore core-specific divalent cation signals are more important than endogenous signals for the induction of spore germination.

The COVID-19 pandemic has disproportionately affected women and threatens to overturn four decades of progress in Sustainable Development Goal (SDG) 5: Gender Equality and Women's Empowerment. To better grasp the key areas of concern that gender inequality exists, gender studies and sex-disaggregated evidence are required. Using the PRISMA technique, this review paper is the first attempt to present a comprehensive and current picture of the gendered dimensions of the COVID-19 pandemic in Bangladesh regarding economic well-being, resource endowments, and agency. This study found that women were more likely to face hardship as widows, mothers, or sole breadwinners after the loss of husbands and male household members because of the pandemic. The evidence suggests that the advancement of women during this pandemic was hampered by poor reproductive health outcomes; girls' dropping out of school; job loss; less income; a comparable wage gap; a lack of social security; unpaid work burnout; increased emotional, physical, and sexual abuse; an increase in child marriages; and less participation in leadership and decision-making. Our study found inadequate sex-disaggregated data and gender studies on COVID-19 in Bangladesh. However, our research concludes that policies must account for gender disparities and male and female vulnerability across multiple dimensions to achieve inclusive and effective pandemic prevention and recovery., Competing Interests: The authors declare no conflict of interest., (© 2023 The Authors.)

The appropriate combination of semiconducting polymer-inorganic nanocomposites can enhance the existing performance of polymers-only-based photovoltaic devices. Hence, polyaniline (PANI)/zinc oxide (ZnO) nanocomposites were prepared by combining ZnO nanoparticles with PANI in four distinct ratios to optimize their photovoltaic performance. Using a simple coating method, PANI, ZnO, and its nanocomposite, with varying weight percent (wt%) concentrations of ZnO nanoparticles, i.e., (1 wt%, 2 wt%, 3 wt%, and 4 wt%), were fabricated and utilized as an active layer to evaluate the potential for the high-power conversion efficiency of various concentrations, respectively. PANI/ZnO nanocomposites are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) absorption, energy dispersive X-ray (EDX), and I-V measurement techniques. The XRD analysis showed a distinct, narrow peak, which corresponds to the wurtzite ZnO (101) plane. The SEM analysis verified the production of the PANI/ZnO composite by demonstrating that the crystalline ZnO was integrated into the PANI matrix. The elemental composition was determined by energy dispersive X-ray analysis (EDX), which confirmed the existence of PANI and ZnO without any impurities, respectively. Using Fourier transform infrared (FTIR) spectroscopy, various chemical bonds and stretching vibrations were analyzed and assigned to different peaks. The bandgap narrowing with an increasing PANI/ZnO composition led to exceptional optical improvement. The I-V characterization was utilized to investigate the impact of the nanocomposite on the electrical properties of the PANI/ZnO, and various concentrations of ZnO (1 wt%, 2 wt%, 3 wt%, and 4 wt%) in the PANI matrix were analyzed under both light and dark conditions at an STC of 1.5 AM globally. A high PCE of 4.48% was achieved for the PANI/ZnO (3 wt%), which revealed that the conductivity of the PANI/ZnO nanocomposite thin films improved with the increasing nanocomposite concentration.

Bacterial sporulation and spore germination are two intriguing processes that involve the expression of many genes coherently. Phylogenetic analyses revealed gene conservation among spore-forming Firmicutes, especially in Bacilli and Clostridia. In this study, by homology search, we found Bacillus subtilis sporulation gene homologs of bkdR , ylmC , ylxY , ylzA , ytaF , ytxC , yyaC1 , and yyaC2 in Clostridium perfringenes food-poisoning Type F strain SM101. The β-glucuronidase reporter assay revealed that promoters of six out of eight tested genes (i.e., bkdR , ylmC , ytaF , ytxC , yyaC1 , and yyaC2 ) were expressed only during sporulation, but not vegetative growth, suggesting that these genes are sporulation-specific. Gene knock-out studies demonstrated that C. perfringens Δ bkdR , Δ ylmC , Δ ytxC , and Δ yyaC1 mutant strains produced a significantly lower number of spores compared to the wild-type strain. When the spores of these six mutant strains were examined for their germination abilities in presence of known germinants, an almost wild-type level germination was observed with spores of Δ ytaF or Δ yyaC1 mutants; and a slightly lower level with spores of Δ bkdR or Δ ylmC mutants. In contrast, almost no germination was observed with spores of Δ ytxC or Δ yyaC2 mutants. Consistent with germination defects, Δ ytxC or Δ yyaC2 spores were also defective in spore outgrowth and colony formation. The germination, outgrowth, and colony formation defects of Δ ytxC or Δ yyaC2 spores were restored when Δ ytxC or Δ yyaC2 mutant was complemented with wild-type ytxC or yyaC2 , respectively. Collectively, our current study identified new sporulation and germination genes in C. perfringens .

The scientific interest in piezoelectric micro-energy harvesting (PMEH) has been fast-growing, demonstrating that the field has made a major improvement in the long-term evolution of alternative energy sources. Although various research works have been performed and published over the years, only a few attempts have been made to examine the research's influence in this field. Therefore, this paper presents a bibliometric study into low-cost PMEH from ambient energy sources within the years 2010-2021, outlining current research trends, analytical assessment, novel insights, impacts, challenges and recommendations. The major goal of this paper is to provide a bibliometric evaluation that is based on the top-cited 100 articles employing the Scopus databases, information and refined keyword searches. This study analyses various key aspects, including PMEH emerging applications, authors' contributions, collaboration, research classification, keywords analysis, country's networks and state-of-the-art research areas. Moreover, several issues and concerns regarding PMEH are identified to determine the existing constraints and research gaps, such as technical, modeling, economics, power quality and environment. The paper also provides guidelines and suggestions for the development and enhancement of future PMEH towards improving energy efficiency, topologies, design, operational performance and capabilities. The in-depth information, critical discussion and analysis of this bibliometric study are expected to contribute to the advancement of the sustainable pathway for PMEH research.

A four-level double lambda closed atomic configuration is considered to study the polarization plane rotation of the probe beam through cold as well as thermal Rb[Formula: see text] atomic medium by varying the spontaneously generated coherence (SGC). Magnetic field and strong coupling field are applied to the atomic configuration. The light-matter interaction leads to enhanced the magneto-optical rotation. The intensity of the applied fields plays promising role in the generation and enhancement of birefringence. It ultimately enhances the polarization plane rotation of the probe beam in the Doppler medium. In the presence of both SGC and Doppler broadening effects, the optical rotation and transmission of the weak light beam are modified and controlled as well, which have potential applications in magnetometery and laser frequency stabilization., (© 2022. The Author(s).)

In this paper, we report on the synthesis-via the wet chemical precipitation route method-and thin film characteristics of inorganic semiconductor, cuprous oxide (Cu 2 O) nanoparticles, for their potential application in enhancing the humidity-sensing properties of semiconducting polymer poly(9,9-dioctylfluorene) (F8). For morphological analysis of the synthesized Cu 2 O nanoparticles, transmission electron microscope (TEM) and scanning electron microscope (SEM) micrographs are studied to investigate the texture, distribution, shape, and sizes of Cu 2 O crystallites. The TEM image of the Cu 2 O nanoparticles exhibits somewhat non-uniform distribution with almost uniform shape and size having an average particle size of ≈24 ± 2 nm. Fourier transformed infrared (FTIR) and X-ray diffraction (XRD) spectra are studied to validate the formation of Cu 2 O nanoparticles. Additionally, atomic force microscopy (AFM) is performed to analyze the surface morphology of polymer-inorganic (F8-Cu 2 O) nanocomposites thin film to see the grain sizes, mosaics, and average surface roughness. In order to study the enhancement in sensing properties of F8, a hybrid organic-inorganic (F8-Cu 2 O) surface-type humidity sensor Ag/F8-Cu 2 O/Ag is fabricated by employing F8 polymer as an active matrix layer and Cu 2 O nanoparticles as a dopant. The Ag/F8-Cu 2 O/Ag device is prepared by spin coating a 10:1 wt% solution of F8-Cu 2 O nanocomposite on pre-patterned silver (Ag) electrodes on glass. The inter-electrode gap (≈5 μm) between Ag is developed by photolithography. To study humidity sensing, the Ag/F8-Cu 2 O/Ag device is characterized by measuring its capacitance (C) as a function of relative humidity (%RH) at two different frequencies (120 Hz and 1 kHz). The device exhibits a broad humidity sensing range (27-86%RH) with shorter response time and recovery time, i.e., 9 s and 8 s, respectively. The present results show significant enhancement in the humidity-sensing properties as compared to our previously reported results of Ag/F8/Ag sensor wherein the humidity sensing range was 45-78%RH with 15 s and 7 s response and recovery times, respectively. The improvement in the humidity-sensing properties is attributed to the potential use of Cu 2 O nanoparticles, which change the hydrophobicity, surface to volume ratio of Cu 2 O nanoparticles, as well as modification in electron polarizability and polarity of the F8 matrix layer.

During the last decade, countless advancements have been made in the field of micro-energy storage systems (MESS) and ambient energy harvesting (EH) shows great potential for research and future improvement. A detailed historical overview with analysis, in the research area of MESS as a form of ambient EH, is presented in this study. The top-cited articles in the field of MESS ambient EH were selected from the Scopus database, and based on articles published from 2010 to 2021, and the number of citations. The search for these top-cited articles was conducted in the third week of December 2021. Mostly the manuscripts were technical and contained an experimental setup with algorithm development (65%), whereas 27.23% of the articles were survey-based. One important observation was that the top 20 selected articles, which are the most-cited articles in the different journals, come from numerous countries of origin. This study revealed that the MESS integrated renewable energy sources (RESs) are an enhancement field of research for EH applications. On the basis of this survey, we hope to identify and solve research problems in the field of MESS and RESs integration, and provide suggestions for future developments for EH applications.

In recent years, the nuclear power plant has received huge attention as it generates vast amounts of power at a lower cost. However, its creation of radioactive wastes is a major environmental concern. Therefore, the nuclear power plant requires a reliable and uninterrupted monitoring system as an essential part of it. Monitoring a nuclear power plant using wireless sensor networks is a convenient and popular practice now. This paper proposes a hybrid approach for monitoring wireless sensor networks in the context of a nuclear power plant in Bangladesh. Our hybrid approach enhances the lifespan of wireless sensor networks reducing power consumption and offering better connectivity of sensors. To do so, it uses both the topology maintenance and topology construction algorithms. We found that the HGETRecRot topology maintenance algorithm enhances the network lifetime compared to other algorithms. This algorithm increases the communication and sensing coverage area but decreases the network performance. We also propose a prediction model, based on linear regression algorithm, that predicts the best combination of topology maintenance and topology construction algorithms., (© 2022. The Author(s).)

The Internet of Things (IoT) empowers the development of heterogeneous systems for various application domains using embedded devices and diverse data transmission protocols. Collaborative integration of these systems in the industrial domain leads to incompatibility and interoperability at different automation levels, requiring unified coordination to exchange information efficiently. The hardware specifications of these devices are resource-constrained, limiting their performance in resource allocation, data management, and remote process supervision. Hence, unlocking network capabilities with other domains such as cloud and web services is required. This study proposed a platform-independent middleware module incorporating the Open Platform Communication Unified Architecture (OPC UA) and Representational State Transfer (REST) paradigms. The object-oriented structure of this middleware allows information contextualization to address interoperability issues and offers aggregated data integration with other domains. RESTful web and cloud platforms were implemented to collect this middleware data, provide remote application support, and enable aggregated resource allocation in a database server. Several performance assessments were conducted on the developed system deployed in Raspberry Pi and Intel NUC PC, which showed acceptable platform resource utilization regarding CPU, bandwidth, and power consumption, with low service, update, and response time requirements. This integrated approach demonstrates an excellent cost-effective prospect for interoperable Machine-to-Machine (M2M) communication, enables remote process supervision, and offers aggregated bulk data management with wider domains.

Surface plasmon (SP)-induced spectral hole burning (SHB) at the silver-dielectric interface is investigated theoretically. We notice a typical lamb dip at a selective frequency, which abruptly reduces the absorption spectrum of the surface plasmons polaritons (SPP). Introducing the spontaneous generated coherence (SGC) in the atomic medium, the slope of dispersion becomes normal. Additionally, slow SPP propagation is also noticed at the interface. The spectral hole burning dip is enhanced with the SGC effect and can be modified and controlled with the frequency and intensity of the driving fields. The SPP propagation length at the hole-burning region is greatly enhanced under the effect of SGC. A propagation length of the order of 600 µm is achieved for the modes, which is a remarkable result. The enhancement of plasmon hole burning under SGC will find significant applications in sensing technology, optical communication, optical tweezers and nano-photonics.

Like Smart Home and Smart Devices, Smart Navigation has become necessary to travel through the congestion of the structure of either building or in the wild. The advancement in smartphone technology and incorporation of many different precise sensors have made the smartphone a unique choice for developing practical navigation applications. Many have taken the initiative to address this by developing mobile-based solutions. Here, a cloud-based intelligent traveler assistant is proposed that exploits user-generated position and elevation data collected from ubiquitous smartphone devices equipped with Accelerometer, Gyroscope, Magnetometer, and GPS (Global Positioning System) sensors. The data can be collected by the pedestrians and the drivers, and are then automatically put into topological information. The platform and associated innovative application allow travelers to create a map of a route or an infrastructure with ease and to share the information for others to follow. The cloud-based solution that does not cost travelers anything allows them to create, access, and follow any maps online and offline. The proposed solution consumes little battery power and can be used with lowly configured resources. The ability to create unknown, unreached, or unrecognized rural/urban road maps, building structures, and the wild map with the help of volunteer traveler-generated data and to share these data with the greater community makes the presented solution unique and valuable. The proposed crowdsourcing method of knowing the unknown would be an excellent support for travelers.

This paper reviews energy storage systems, in general, and for specific applications in low-cost micro-energy harvesting (MEH) systems, low-cost microelectronic devices, and wireless sensor networks (WSNs). With the development of electronic gadgets, low-cost microelectronic devices and WSNs, the need for an efficient, light and reliable energy storage device is increased. The current energy storage systems (ESS) have the disadvantages of self-discharging, energy density, life cycles, and cost. The ambient energy resources are the best option as an energy source, but the main challenge in harvesting energy from ambient sources is the instability of the source of energy. Due to the explosion of lithium batteries in many cases, and the pros associated with them, the design of an efficient device, which is more reliable and efficient than conventional batteries, is important. This review paper focused on the issues of the reliability and performance of electrical ESS, and, especially, discussed the technical challenges and suggested solutions for ESS (batteries, supercapacitors, and for a hybrid combination of supercapacitors and batteries) in detail. Nowadays, the main market of batteries is WSNs, but in the last decade, the world's attention has turned toward supercapacitors as a good alternative of batteries. The main advantages of supercapacitors are their light weight, volume, greater life cycle, turbo charging/discharging, high energy density and power density, low cost, easy maintenance, and no pollution. This study reviews supercapacitors as a better alternative of batteries in low-cost electronic devices, WSNs, and MEH systems.

The promising chemical, mechanical, and electrical properties of silver from nano scale to bulk level make it useful to be used in a variety of applications in the biomedical and electronic fields. Recently, several methods have been proposed and applied for the small-scale and mass production of silver in the form of nanoparticles, nanowires, and nanofibers. In this research, we have proposed a novel method for the fabrication of silver nano fibers (AgNFs) that is environmentally friendly and can be easily deployed for large-scale production. Moreover, the proposed technique is easy for device fabrication in different applications. To validate the properties, the synthesized silver nanofibers have been examined through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Further, the synthesized silver nanofibers have been deposited over sensors for Relative humidity (RH), Ammonia (NH 3 ), and temperature sensing applications. The sensor was of a resistive type, and found 4.3 kΩ for relative humidity (RH %) 30-90%, 400 kΩ for NH 3 (40,000 ppm), and 5 MΩ for temperature sensing (69 °C). The durability and speed of the sensor verified through repetitive, response, and recovery tests of the sensor in a humidity and gas chamber. It was observed that the sensor took 13 s to respond, 27 s to measure the maximum value, and took 33 s to regain its minimum value. Furthermore, it was observed that at lower frequencies and higher concentration of NH 3 , the response of the device was excellent. Furthermore, the device has linear and repetitive responses, is cost-effective, and is easy to fabricate.

Background and Objectives: Globally, coronary artery disease (CAD) remains one of the leading causes of death, both in developed and less economically developed countries (LEDC) including Bangladesh. Diet plays a key role in the pathogenesis processes of atherosclerosis and coronary artery disease (CAD). The purpose of this study was to assess the dietary habit of heart disease cases that had CAD against matched controls., Methodology: Complying Helsinki ethical norms, with written consent, this case-control study was performed among 210 subjects: 105 CAD-hospitalized patients (selected from Lab Aid Cardiac and Specialized Hospitals) and 105 healthy subjects from local urban communities having their body mass index (BMI: ranging between ≥18.5 and 27 socio-demographic status, detailed-dietary patterns and blood pressure levels were recorded, anthropometric indices measured, and serum biochemistry (complete lipid profile) tested/analyzed for both the cases and controls. All visually re-checked data were analyzed using appropriate statistical tools (t test/conditional-logistic regressions) on SPS/Windows V.21.0., Result: Almost half (45%) CAD patients had hypertriglyceridemia and higher levels of low-density lipoprotein, significantly higher BMA (p=0.001), waist circumference, and waist to hip ratio in male patients (p=0.005 and p=0.020, respectively) than their peer controls. Serum lipid profiles, sugar concentrations, and blood pressure levels of CAD patients revealed higher levels than clinically defined cut-off values as established risk factors for CAD. Odds ratios (CI 95%) as risk factors for consuming junk food {OR=5.49 (2.25-13.38)}, chicken {OR=4.54 (1.89-10.9) was the most, followed by beef {OR=2.68 (1.19-4.98)}, eggs {OR=2.38 (1.14-10.92)}, fish {OR=2.81 (1.31-6.04)}, and vegetables {0R=.968 (0.510-1.839)}. However, fat-free milk, ghee/butter oil, curd/yogurt, and fruits had lower ORs revealing no or less risks for CAD., Conclusion: Food habits of CAD patients (with higher BMI level and biochemical indicators of the blood) statistically revealed that consuming junk food, meat, and eggs being riskier, fruits, fat-free milk, yogurt, and vegetable remains have protective effects on CAD.

This paper reports the potential application of cadmium selenide (CdSe) quantum dots (QDs) in improving the microelectronic characteristics of Schottky barrier diode (SBD) prepared from a semiconducting material poly-(9,9-dioctylfluorene) (F8). Two SBDs, Ag/F8/P3HT/ITO and Ag/F8-CdSe QDs/P3HT/ITO, are fabricated by spin coating a 10 wt% solution of F8 in chloroform and 10:1 wt% solution of F8:CdSe QDs, respectively, on a pre-deposited poly(3-hexylthiophene) (P3HT) on indium tin oxide (ITO) substrate. To study the electronic properties of the fabricated devices, current-voltage (I-V) measurements are carried out at 25 °C in dark conditions. The I-V curves of Ag/F8/P3HT/ITO and Ag/F8-CdSe QDs/P3HT/ITO SBDs demonstrate asymmetrical behavior with forward bias current rectification ratio (RR) of 7.42 ± 0.02 and 142 ± 0.02, respectively, at ± 3.5 V which confirm the formation of depletion region. Other key parameters which govern microelectronic properties of the fabricated devices such as charge carrier mobility (µ), barrier height (ϕ b ), series resistance (R s ) and quality factor (n) are extracted from their corresponding I-V characteristics. Norde's and Cheung functions are also applied to characterize the devices to study consistency in various parameters. Significant improvement is found in the values of R s , n, and RR by 3, 1.7, and 19 times, respectively, for Ag/F8-CdSe QDs/P3HT/ITO SBD as compared to Ag/F8/P3HT/ITO. This enhancement is due to the incorporation of CdSe QDs having 3-dimensional quantum confinement and large surface-to-volume area. Poole-Frenkle and Richardson-Schottky conduction mechanisms are also discussed for both of the devices. Morphology, optical bandgap (1.88 ± 0.5 eV) and photoluminescence (PL) spectrum of CdSe QDs with a peak intensity at 556 nm are also reported and discussed.

As obligate anaerobes, clostridial pathogens depend on their metabolically dormant, oxygen-tolerant spore form to transmit disease. However, the molecular mechanisms by which those spores germinate to initiate infection and then form new spores to transmit infection remain poorly understood. While sporulation and germination have been well characterized in Bacillus subtilis and Bacillus anthracis , striking differences in the regulation of these processes have been observed between the bacilli and the clostridia, with even some conserved proteins exhibiting differences in their requirements and functions. Here, we review our current understanding of how clostridial pathogens, specifically Clostridium perfringens , Clostridium botulinum , and Clostridioides difficile , induce sporulation in response to environmental cues, assemble resistant spores, and germinate metabolically dormant spores in response to environmental cues. We also discuss the direct relationship between toxin production and spore formation in these pathogens.

GFP-N, a novel heteropolysaccharide with a molecular weight of 1.26 × 10 7  Da, was isolated from maitake mushroom and purified by anion-exchange chromatography on a DEAE cellulose-52 column and gel-filtration chromatography on a Sephadex G-100 column. Its structure was characterized by Fourier transform infrared spectroscopy and one-dimensional ( 1 H- and 13 C-) NMR spectra, 1 H 1 H correlation spectroscopy, and 1 H 13 C heteronuclear single-quantum coherence spectroscopy. The structure of GFP-N consisted of L-arabinose, D-mannose and D-glucose and mainly contained three kinds of linkage type units as →2,6)-α-D-Manp-(1 → 4, α-L-Araf-C1→, and →3,6)-β-D-Glcp-(1 → . GFP-N could activate insulin receptor substrate 1, phosphatidylinositol-3-kinase, and glucose transporter 4 and inhibit c-Jun N-terminal kinase 1/2 for hypoglycemic effects in diabetic mouse livers. This is also the first report of the regulatory efficacy of Grifola frondosa polysaccharide on intestinal microflora in vivo using single-molecule real-time sequencing. These results indicated that polysaccharide from maitake mushroom could be as an enhancer to improve type 2 diabetes and a healthy food option to help regulate gut microbiota in diabetic individuals., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

RelA is a global regulator for stationary phase development in the model bacterium Bacillus subtilis. The relA gene forms a bicistronic operon with the downstream dtd gene. In this study, we evaluated the significance of RelA and DTD proteins in spore formation and toxin production by an important gastrointestinal pathogen Clostridium perfringens. Our β-glucuronidase assay showed that in C. perfringens strain SM101, relA forms a bicistronic operon with its downstream dtd gene, and the relA promoter is expressed during both vegetative and sporulation conditions. By constructing double relA dtd and single dtd mutants in C. perfringens SM101, we found that: (1) RelA is required for maintaining the efficient growth capacity of SM101 cells during vegetative conditions; (2) both RelA and DTD are required for spore formation and enterotoxin (CPE) production by SM101; (3) RelA/DTD activate CodY, which is known to activate spore formation and CPE production in SM101 by activating a key sporulation-specific σ factor F; (4) as expected, RelA/DTD activate sporulation-specific σ factors (σ E , σ F , σ G and σ K ) by positively regulating Spo0A production; and finally (5) RelA, but not DTD, negatively regulates phospholipase C (PLC) production by repressing plc gene expression. Collectively, our results demonstrate that RelA modulates cellular physiology such as growth, spore formation and toxin production by C. perfringens type A strain SM101, although DTD also plays a role in these pleiotropic functions in coordination with RelA during sporulation. These findings have implications for the understanding of the mechanisms involved in the infectious cycle of C. perfringens.

Processes such as aberrant redox signaling and chronic low-grade systemic inflammation have been reported to modulate age-associated pathologies such as cognitive impairment. Curcumin, the primary therapeutic component of the Indian spice, Turmeric (Curcuma longa), has long been known for its strong anti-inflammatory and antioxidant activity attributable to its unique molecular structure. Recently, an interest in this polyphenol as a cognitive therapeutic for the elderly has emerged. The purpose of this paper is to critically review preclinical and clinical studies that have evaluated the efficacy of curcumin in ameliorating and preventing age-associated cognitive decline and address the translational progress of preclinical to clinical efficacy. PubMed, semantic scholar, and Google scholar searches were used for preclinical studies; and clinicaltrials.gov , the Australian and New Zealand clinical trials registry, and PubMed search were used to select relevant completed clinical studies. Results from preclinical studies consistently demonstrate curcumin and its analogues to be efficacious for various aspects of cognitive impairment and processes that contribute to age-associated cognitive impairment. Results of published clinical studies, while mixed, continue to show promise for curcumin's use as a therapeutic for cognitive decline but overall remain inconclusive at this time. Both in vitro and in vivo studies have found that curcumin can significantly decrease oxidative stress, systemic inflammation, and obstruct pathways that activate transcription factors that augment these processes. Future clinical studies would benefit from including evaluation of peripheral and cerebrospinal fluid biomarkers of dementia and behavioral markers of cognitive decline, as well as targeting the appropriate population.

Aim: The aim of this study was to develop a novel cabazitaxel bone targeted nanoparticle (NP) system for improved drug delivery to the bone microenvironment., Materials & Methods: Nanoparticles were developed using poly(D,L-lactic-co-glycolic acid) and cabazitaxel as the core with amino-bisphosphonate surface conjugation. Optimization of nanoparticle physiochemical properties, in vitro evaluation in prostate cancer cell lines and in vivo testing in an intraosseous model of metastatic prostate cancer was performed., Results: This bone targeted cabazitaxel nanocarrier system showed significant reduction in tumor burden, while at the same time maintaining bone structure integrity and reducing pain in the mouse tumor limb., Conclusion: This bone microenvironment targeted nanoparticle system and clinically relevant approach of evaluation represents a promising advancement for treating bone metastatic cancer.

Clostridium perfringens is an important pathogen to human and animals and causes a wide array of diseases, including histotoxic and gastrointestinal illnesses. C. perfringens spores are crucial in terms of the pathogenicity of this bacterium because they can survive in a dormant state in the environment and return to being live bacteria when they come in contact with nutrients in food or the human body. Although the strategies to inactivate C. perfringens vegetative cells are effective, the inactivation of C. perfringens spores is still a great challenge. A number of studies have been conducted in the past decade or so toward developing efficient inactivation strategies for C. perfringens spores and vegetative cells, which include physical approaches and the use of chemical preservatives and naturally derived antimicrobial agents. In this review, different inactivation strategies applied to control C. perfringens cells and spores are summarized, and the potential limitations and challenges of these strategies are discussed., (Copyright © 2016 American Society for Microbiology.)

Clostridium perfringens type A can cause both food poisoning (FP) and non-food-borne (NFB) gastrointestinal diseases. Our previous study reported that a mixture of l-asparagine and KCl (AK)-germinated spores of FP and NFB isolates well, but KCl and, to a lesser extent, l-asparagine induced spore germination only in FP isolates. We now report that the germination response of FP and NFB spores differsignificantly in several defined germinants and rich media. Spores of NFB strain F4969 gerAA, gerKA-KC or gerKC mutants lacking specific germinant receptor proteins germinated more slowly than wild-type spores with rich media, did not germinate with AK and germinated poorly compared to wild-type spores with l-cysteine. The germination defects in the gerKA-KC spores were largely due to loss of GerKC as (i) gerKA spores germinated significantly with all tested germinants, while gerKC spores exhibited poor or no germination; and (ii) germination defects in gerKC spores were largely restored by expressing the wild-type gerKA-KC operon in trans. We also found that gerKA-KC, gerAA and gerKC spores, but not gerKA spores, released dipicolinic acid at a slower rate than wild-type spores with AK. The colony-forming efficiency of F4969 gerKC spores was also ~35-fold lower than that of wild-type spores, while gerAA and wild-type spores had similar viability. Collectively, these results suggest that the GerAA and GerKC proteins play roles in normal germination of C. perfringens NFB isolates and that GerKC, but not GerAA, is important in these spores' apparent viability.

This paper presents a new method for a vibration-based piezoelectric energy harvesting system using a backtracking search algorithm (BSA)-based proportional-integral (PI) voltage controller. This technique eliminates the exhaustive conventional trial-and-error procedure for obtaining optimized parameter values of proportional gain (Kp), and integral gain (Ki) for PI voltage controllers. The generated estimate values of Kp and Ki are executed in the PI voltage controller that is developed through the BSA optimization technique. In this study, mean absolute error (MAE) is used as an objective function to minimize output error for a piezoelectric energy harvesting system (PEHS). The model for the PEHS is designed and analyzed using the BSA optimization technique. The BSA-based PI voltage controller of the PEHS produces a significant improvement in minimizing the output error of the converter and a robust, regulated pulse-width modulation (PWM) signal to convert a MOSFET switch, with the best response in terms of rise time and settling time under various load conditions.

Clostridium difficile is the causative agent of the most frequently reported nosocomial diarrhea worldwide. The high incidence of recurrent infection is the main clinical challenge of C. difficile infections (CDI). Formation of C. difficile spores of the epidemic strain R20291 has been shown to be essential for recurrent infection and transmission of the disease in a mouse model. However, the underlying mechanisms of how these spores persist in the colonic environment remains unclear. In this work, we characterized the adherence properties of epidemic R20291 spores to components of the intestinal mucosa, and we assessed the role of the exosporium integrity in the adherence properties by using cdeC mutant spores with a defective exosporium layer. Our results showed that spores and vegetative cells of the epidemic R20291 strain adhered at high levels to monolayers of Caco-2 cells and mucin. Transmission electron micrographs of Caco-2 cells demonstrated that the hair-like projections on the surface of R20291 spores are in close proximity with the plasma membrane and microvilli of undifferentiated and differentiated monolayers of Caco-2 cells. Competitive-binding assay in differentiated Caco-2 cells suggests that spore-adherence is mediated by specific binding sites. By using spores of a cdeC mutant we demonstrated that the integrity of the exosporium layer determines the affinity of adherence of C. difficile spores to Caco-2 cells and mucin. Binding of fibronectin and vitronectin to the spore surface was concentration-dependent, and depending on the concentration, spore-adherence to Caco-2 cells was enhanced. In the presence of an aberrantly-assembled exosporium ( cdeC spores), binding of fibronectin, but not vitronectin, was increased. Notably, independent of the exosporium integrity, only a fraction of the spores had fibronectin and vitronectin molecules binding to their surface. Collectively, these results demonstrate that the integrity of the exosporium layer of strain R20291 contributes to selective spore adherence to components of the intestinal mucosa.

Unlabelled: This work analyzes the high-pressure (HP) germination of spores of the food-borne pathogen Clostridium perfringens (with inner membrane [IM] germinant receptors [GRs]) and the opportunistic pathogen Clostridium difficile (with no IM GRs), which has growing implications as an emerging food safety threat. In contrast to those of spores of Bacillus species, mechanisms of HP germination of clostridial spores have not been well studied. HP treatments trigger Bacillus spore germination through spores' IM GRs at ∼150 MPa or through SpoVA channels for release of spores' dipicolinic acid (DPA) at ≥400 MPa, and DPA-less spores have lower wet heat resistance than dormant spores. We found that C. difficile spores exhibited no germination events upon 150-MPa treatment and were not heat sensitized. In contrast, 150-MPa-treated unactivated C. perfringens spores released DPA and became heat sensitive, although most spores did not complete germination by fully rehydrating the spore core, but this treatment of heat-activated spores led to almost complete germination and greater heat sensitization. Spores of both clostridial organisms released DPA during 550-MPa treatment, but C. difficile spores did not complete germination and remained heat resistant. Heat-activated 550-MPa-HP-treated C. perfringens spores germinated almost completely and became heat sensitive. However, unactivated 550-MPa-treated C. perfringens spores did not germinate completely and were less heat sensitive than spores that completed germination. Since C. difficile and C. perfringens spores use different mechanisms for sensing germinants, our results may allow refinement of HP methods for their inactivation in foods and other applications and may guide the development of commercially sterile low-acid foods., Importance: Spores of various clostridial organisms cause human disease, sometimes due to food contamination by spores. Because of these spores' resistance to normal decontamination regimens, there is continued interest in ways to kill spores without compromising food quality. High hydrostatic pressure (HP) under appropriate conditions can inactivate bacterial spores. With growing use of HP for food pasteurization, advancement of HP for commercial production of sterile low-acid foods requires understanding of mechanisms of spores' interactions with HP. While much is known about HP germination and inactivation of spores of Bacillus species, how HP germinates and inactivates clostridial spores is less well understood. In this work we have tried to remedy this information deficit by examining germination of spores of Clostridium difficile and Clostridium perfringens by several HP and temperature levels. The results may give insight that could facilitate more efficient methods for spore eradication in food sterilization or pasteurization, biodecontamination, and health care., (Copyright © 2016, American Society for Microbiology. All Rights Reserved.)

The ability of Clostridium perfringens to form spores plays a key role during the transmission of this Gram-positive bacterium to cause disease. Of particular note, the spores produced by food poisoning strains are often exceptionally resistant to food environment stresses such as heat, cold, and preservatives, which likely facilitates their survival in temperature-abused foods. The exceptional resistance properties of spores made by most type A food poisoning strains and some type C foodborne disease strains involve their production of a variant small acid-soluble protein-4 that binds more tightly to spore DNA than to the small acid-soluble protein-4 made by most other C. perfringens strains. Sporulation and germination by C. perfringens and Bacillus spp. share both similarities and differences. Finally, sporulation is essential for production of C. perfringens enterotoxin, which is responsible for the symptoms of C. perfringens type A food poisoning, the second most common bacterial foodborne disease in the United States. During this foodborne disease, C. perfringens is ingested with food and then, by using sporulation-specific alternate sigma factors, this bacterium sporulates and produces the enterotoxin in the intestines.