Search

Background/Objectives : The suprascapular nerve is most vulnerable to entrapment at the suprascapular and spinoglenoid notches, causing neuropathy. Numerous studies have examined the suprascapular notch and ligament and its relationship with suprascapular nerve entrapment, but few have examined the spinoglenoid notch and the inferior transverse scapular ligament (ITSL). This study summarizes all existing ITSL morphology studies and presents a simple and comprehensive classification system for different ITSL subtypes. Methods: A systematic review of the literature was conducted according to the PRISMA guidelines, searching the online databases PubMed and Embase. The references of each relevant article were further screened to find more eligible studies. The Anatomical Quality Assessment tool was used in order to further evaluate the quality of the records extracted. STATA MP 14 was used for the analysis in this study. Results : In total, 14 studies (995 scapulae; minimum: 1 and maximum: 268) were included in the present study. The overall ITSL prevalence was 5.8 (95% CI: 4.5-7.1) and the estimated odds for ligamentous vs. membranous type was 0.5 (95% CI: 0.3-0.7). The basic different morphological subtypes of the ITSL reported in the included studies are the band-like ligament, the fan-shaped ligament, the membranous ITSL, and the perforated membranous types. Conclusions: The ITSL represents an anatomical structure of mostly ligamentous nature. A single ITSL definition and standardization of its basic morphological subtypes along with an easy-to-remember and thus widely used classification system could greatly facilitate the comprehensive description, identification, and proper handling of this element across many surgical procedures.

Extreme Lateral Interbody Fusion (XLIF) is currently used in the clinical treatment of thoracic spine disorders and has achieved desirable results. In this study, we selected CT images of the thoracic spine from 54 patients and divided the intervertebral spaces into six regions (A, I, II, III, IV, P) using the Moro method. We observed the adjacent relationships between the thoracic spine and surrounding tissues such as the scapula, esophagus, thoracic aorta, and superior vena cava. We made four main findings: firstly, when the scapulae were symmetrical on both sides, over 80% of patients had the T1-4 II-III region obstructed by the scapulae; secondly, when the esophagus was located on the left side of the vertebral body, 3.7% to 24.1% of patients had the T4-9 region located in the II-III zone; furthermore, when the thoracic aorta was on the left side of the vertebral body, over 80% of individuals in the T4-9 segment occupied the II-III region, with the values being 55.5% and 20.4% for T9/10 and T10/11, respectively; finally, the superior vena cava was located on the right side of the T4/5 vertebra, with 3.7% of individuals having it in the II-III region, while on the left side of T5-9, 3.7% to 18.5% of individuals had it in the II-III region. Based on these findings, we suggest that XLIF should not be performed on the T1-4 vertebrae due to scapular obstruction. Selecting the left-sided approach for XLIF in the T4-11 segments may risk injuring the thoracic aorta, esophagus, and superior vena cava, while the T11/12 segment is considered safe and feasible. Choosing the right-sided approach for XLIF may pose a risk of injuring the superior vena cava in the T4/5 segment, but it is safe and feasible in the T5-12 segments., Competing Interests: The authors have no conflicts of interest to disclose., (Copyright © 2024 the Author(s). Published by Wolters Kluwer Health, Inc.)

Anthropometric studies of the scapula have been rare in Spanish populations, nevertheless they are of current interest in forensic anthropology for estimation of sex. Although the estimation of sex is usually carried out on the pelvis and skull, other measurements related to the scapula can be helpful when the skeletal remains are incomplete. Glenohumeral osteoarthritis development is influenced, among others, by the morphology of the scapula, which is one of the less studied aspects. We carried out a descriptive study of anthropometric parameters in a series of 157 scapulae (82 individuals) on bone remains dated to the 20th century from a population of Granada (Southern Spain). Seventy seven (49%) were right-side and 80 (51%) left-side; 72 (45.9%) were from males and 85 (54.1%) from females, and the mean age at death was 70.76±11.7 years. The objective was to develop a discrimination function for sex estimation based on anthropometric parameters of the scapula other than those considered to date, and to analyze the prevalence of glenohumeral osteoarthritis in relation to selected anthropometric parameters. A logistic regression model based on parameters of the upper-external segment of the scapula was done. The obtained formula: 1/1+e^ (- (-57.911 + 0.350*B + 0283*C + 0.249*b + 0.166*a +-0.100*β) classifies male sex with 98.3% accuracy and female sex with 92.1%. Glenohumeral osteoarthritis was detected in 16.6% of individuals and was related to age (p<0.05), scapular length (p<0.05), glenoid width (p<0.05), glenopolar angle (p<0.05), and α angle (p<0.05) in bivariate analyses but showed no significant associations in multivariate analyses. This approach can be useful for anthropological-forensic identification when scapula remains are incomplete. Glenohumeral osteoarthritis is significantly associated with a smaller α angle., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Garzón-Alfaro et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Accurate detection of the levator scapulae muscle is critical for effective diagnostic and therapeutic interventions. The commonly used surface anatomy approach has not been validated and is less accurate than ultrasound-guided techniques. Therefore, we determined the needle insertion point for the levator scapulae using a new technique based on the anatomy of the scapula. This investigation used 15 fresh-frozen cadavers to explore the relationship between the acromial angle and medial tip of the scapular spine (O) of the scapular spine. Based on the x-axis (the distance [L] from Point O to point acromial angle) and the y-axis perpendicular to the x-axis passing through Point O, the barycentric coordinates were determined through the intersections of each axis and the superior angle of the scapula with the levator scapulae. Various ratios involving the established distance L) were ascertained, we compared the measurements and ratios between the male and female groups, and the accuracy of the new technique was compared with the conventional technique. The optimal site of the new technique was within 6 to 7% of distance L on the x-axis and 42 to 44% of distance L on the y-axis. This technique was significantly more accurate than the conventional technique (P = .006). Although ultrasound allows for accurate injections via real-time visualization, its unavailability in some cases highlights the importance of understanding surface anatomy landmarks. Our new technique, based on the anatomy of the scapula and relative measurements, is more accurate than the conventional technique. This should enable more precise detection of the levator scapulae for accurate and efficient diagnostic and therapeutic procedures., Competing Interests: Y-SN and JIL contributed equally to this work.The authors have no funding and conflicts of interest to disclose., (Copyright © 2024 the Author(s). Published by Wolters Kluwer Health, Inc.)

The purpose of this study was to identify the relationship between scapula morphology and rotator cuff tears (RCT). Hundred seventeen shoulders with and 87 shoulders without RCTs were included in this retrospective study. The critical shoulder angle (CSA) and lateral acromion angle in the coronal view, and the acromial coverage angle (ACA) and coracoid and scapular spine angle (CSSA) in the sagittal view were evaluated using 3-dimensional computed tomography. The glenoid anterior tilt, anterior acromial projection angle (AAPA), coracoid process angle, scapular spine angle (SSA), and inferior angle angle (IAA) with respect to the scapular plane were measured in the sagittal view. In univariate logistic regression analysis, CSA, ACA, AAPA, SSA, and IAA were significantly greater in shoulders with RCTs, whereas CSSA was greater in shoulders without RCTs. In multivariate logistic regression analysis, CSA and IAA were greater in shoulders with RCT and were significantly associated with this condition (P=.00073, P=.0032). This study has shown us that RCTs were associated with a greater curvature of the scapular body and greater CSA and IAA.

Background and Objectives : Age estimation from skeletal remains and in living individuals is an important issue for human identification, and also plays a critical role in judicial proceedings for migrants. Forensic analysis of ossification centers is the main evaluation method for age estimation, and ossification degree can be determined using computed tomography analysis. The purpose of this study is to investigate the applicability of CT (computed tomography) in the analysis of left scapula ossification centers, for forensic age estimation in Turkish society. Materials and Methods : We analyzed six ossification centers of the left scapula and these ossification centers are the coracoid, subcoracoid, coracoid apex, acromial, glenoid, and inferior angle ossification centers. A pediatric radiologist analyzed these six ossification centers of the scapula by using a staging method defined by Schmeling et al. in 2004. Two months after the first assessment, 20 randomly selected cases was reanalyzed by the first observer and by another pediatric radiologist. Correlation between the age and ossification stage was assessed using Spearman's nonparametric correlation test. Linear regression analysis was performed using a backwards model. Cohen's kappa coefficient was used for evaluating interobserver and intraobserver variability. Results : In this retrospective study, 397 (248 male and 149 female) cases were evaluated. Ages ranged between 7.1 and 30.9. The mean age was 19.83 ± 6.49. We determined a positive significant correlation between the age and the ossification stages of ossification centers analyzed in both sexes. In each ossification center, except inferior angle, all of the stage 1 and 2 cases in both sexes were under 18 years old. Intraobserver and interobserver evaluations showed that reproducibility and consistency of the method was relatively good. Conclusions : The present study indicated that CT analysis of scapula ossification centers might be helpful in forensic age assessment of living individuals and dry bones.

The functions of the subclavius muscle (SM) are described as stabilization of the sternoclavicular joint (SCJ) and resisting elevation of the lateral end of the clavicle. During systematic cadaveric dissections, we observed additional fibrous structures, previously described as variants of the anatomy, extending from the SM and inserting into the coracoid process (CP). Due to the high incidence of these structures in our dissections, we hypothesized that the attachment at the CP is more common than appreciated and that, as a corollary, the function of the SM was (or has been) more complex than simply depressing the clavicle and generating stability at the SCJ. For our investigation, fifty-two upper extremities of 26 human cadavers were dissected. The SM was demonstrated from costal to clavicular attachment. We documented additional fibrous structures apparently derived from the SM inserting into the CP. Measurements of the length of the SM, the length of its attachment, and the length of the clavicle were taken in situ, with the specimens supine and the upper extremity in the anatomical position. Variations in the anatomy of the SM and its coracoidal attachment were recorded, and potential correlations were investigated. For documentation purposes photographs and video sequences of passive motion of the shoulder girdle of the specimens were taken. In 49 of the 52 specimens we found additional fibrous structures passing from the SM to the CP. We differentiated three types: (1) a strong cord-like structure; (2) a small or thin cord-like structure or structures; and (3) a planar twisted sheet-like structure. The SM and its extension to the CP appears to contribute to a 'functional scapular suspension system' together with the other muscles enveloped by the clavipectoral fascia (pectoralis minor, coracobrachialis and the short head of the biceps brachii). This system assists in the control of the position of the scapula in relation to the thorax, particularly in elevated positions of the upper extremity. We speculate that the differentiation of the fibrous structure depends on the functional demands of the individual. Level of Evidence: Basic science study., (© 2021 The Authors. Journal of Anatomy published by John Wiley & Sons Ltd on behalf of Anatomical Society.)

Background: On the basis of the available literature, we proposed the hypothesis that the number of muscle bellies is morphologically constant. The main purpose of this study was to examine the morphological variability of the SM and to create a new classification of it based on number of muscle bellies., Methods: Sixty-six adult cadavers of Central European population (45 females, 21 males) were obtained and fixed in 10% formalin before examination., Results: The SM was found in all 66 specimens (45 females, 21 males, 31 left and 35 right sides). After meticulous dissection, we distinguished nine types on the basis of number of bellies. Type I was characterized by single belly and occurred in 1.5%. Type II had a double belly and was present in 3%. Type III, the most common type, occurring in almost 32% of the studied population, had three bellies. The frequency of type IV, characterized by four bellies, was also high, just over 30%. The following types were less frequent: type V with five bellies (18.2%), type VI with six bellies (7.6%), type VII with seven bellies (3%), type VIII with eight bellies (1.5%), and type IX with nine bellies (3%). All of the types had origin on the anterior surface of the scapula., Conclusions: The SM is morphologically variable in the number of its bellies. Evolutionary changes are probably the reason. The most common type was the SM with three bellies, in line with Larson's model of the division of the SM into three parts. Subsequent studies should be carried out based on MRI or ultrasonography examination to confirm if it is possible to show all types (presented in this study) among group of patients during MRI., Competing Interests: There is no conflict of interest., (Copyright © 2021 Nicol Zielinska et al.)

The ca. 3.67 Ma adult skeleton known as 'Little Foot' (StW 573), recovered from Sterkfontein Member 2 breccia in the Silberberg Grotto, is remarkable for its morphology and completeness. Preservation of clavicles and scapulae, including essentially complete right-side elements, offers opportunities to assess morphological and functional aspects of a nearly complete Australopithecus pectoral girdle. Here we describe the StW 573 pectoral girdle and offer quantitative comparisons to those of extant hominoids and selected homininans. The StW 573 pectoral girdle combines features intermediate between those of humans and other apes: a long and curved clavicle, suggesting a relatively dorsally positioned scapula; an enlarged and uniquely proportioned supraspinous fossa; a relatively cranially oriented glenoid fossa; and ape-like reinforcement of the axillary margin by a stout ventral bar. StW 573 scapulae are as follows: smaller than those of some homininans (i.e., KSD-VP-1/1 and KNM-ER 47000A), larger than others (i.e., A.L. 288-1, Sts 7, and MH2), and most similar in size to another australopith from Sterkfontein, StW 431. Moreover, StW 573 and StW 431 exhibit similar structural features along their axillary margins and inferior angles. As the StW 573 pectoral girdle (e.g., scapular configuration) has a greater affinity to that of apes-Gorilla in particular-rather than modern humans, we suggest that the StW 573 morphological pattern appears to reflect adaptations to arboreal behaviors, especially those with the hand positioned above the head, more than human-like manipulatory capabilities. When compared with less complete pectoral girdles from middle/late Miocene apes and that of the penecontemporaneous KSD-VP-1/1 (Australopithecus afarensis), and mindful of consensus views on the adaptiveness of arboreal positional behaviors soliciting abducted glenohumeral joints in early Pliocene taxa, we propose that the StW 573 pectoral girdle is a reasonable model for hypothesizing pectoral girdle configuration of the crown hominin last common ancestor., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Background: The shape of pig scapula is complex and is important for sow robustness and health. To better understand the relationship between 3D shape of the scapula and functional traits, it is necessary to build a model that explains most of the morphological variation between animals. This requires point correspondence, i.e. a map that explains which points represent the same piece of tissue among individuals. The objective of this study was to further develop an automated computational pipeline for the segmentation of computed tomography (CT) scans to incorporate 3D modelling of the scapula, and to develop a genetic prediction model for 3D morphology., Results: The surface voxels of the scapula were identified on 2143 CT-scanned pigs, and point correspondence was established by predicting the coordinates of 1234 semi-landmarks on each animal, using the coherent point drift algorithm. A subsequent principal component analysis showed that the first 10 principal components covered more than 80% of the total variation in 3D shape of the scapula. Using principal component scores as phenotypes in a genetic model, estimates of heritability ranged from 0.4 to 0.8 (with standard errors from 0.07 to 0.08). To validate the entire computational pipeline, a statistical model was trained to predict scapula shape based on marker genotype data. The mean prediction reliability averaged over the whole scapula was equal to 0.18 (standard deviation = 0.05) with a higher reliability in convex than in concave regions., Conclusions: Estimates of heritability of the principal components were high and indicated that the computational pipeline that processes CT data to principal component phenotypes was associated with little error. Furthermore, we showed that it is possible to predict the 3D shape of scapula based on marker genotype data. Taken together, these results show that the proposed computational pipeline closes the gap between a point cloud representing the shape of an animal and its underlying genetic components.

Odd-nosed monkeys 'arm-swing' more frequently than other colobines. They are therefore somewhat behaviorally analogous to atelines and apes. Scapular morphology regularly reflects locomotor mode, with both arm-swinging and climbing anthropoids showing similar characteristics, especially a mediolaterally narrow blade and cranially angled spine and glenoid. However, these traits are not expressed uniformly among anthropoids. Therefore, behavioral convergences in the odd-nosed taxa of Nasalis, Pygathrix, and Rhinopithecus with hominoids may not have resulted in similar structural convergences. We therefore used a broad sample of anthropoids to test how closely odd-nosed monkey scapulae resemble those of other arm-swinging primates. We used principal component analyses on size-corrected linear metrics and angles that reflect scapular size and shape in a broad sample of anthropoids. As in previous studies, our first component separated terrestrial and above-branch quadrupeds from clambering and arm-swinging taxa. On this axis, odd-nosed monkeys were closer than other colobines to modern apes and Ateles. All three odd-nosed genera retain glenoid orientations that are more typical of other colobines, but Pygathrix and Rhinopithecus are closer to hominoids than to other Asian colobines in mediolateral blade breadth, spine angle, and glenoid position. This suggests that scapular morphology of Pygathrix may reflect a significant reliance on arm-swinging and that the morphology of Rhinopithecus may reflect more reliance on general climbing. As 'arm-swinging' features are also found in taxa that only rarely arm-swing, we hypothesize that these features are also adaptive for scrambling and bridging in larger bodied anthropoids that use the fine-branch component of their arboreal niches., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Here we present the descriptive and comparative study of two immature scapulae recovered from the TD6.2 level of the Gran Dolina cave site (Sierra de Atapuerca, Spain) and assigned to Homo antecessor. This is the first time that data on the morphology and dimensions of the scapulae of a European late Early Pleistocene hominin population are provided. Considering the state of development and the linear dimensions, the scapula ATD6-116 could belong to a child of about 2-4 years. The morphology of ATD6-116 clearly departs from that of the Australopithecus afarensis juvenile specimen DIK-1-1, pointing to functional differences in locomotor behavior between Australopithecus and the late Early Pleistocene hominins. The immature scapula ATD6-118 belonged to an immature individual with a development of the scapula equivalent to that of adolescents of recent human populations. The scapulae ATD6-118 and KNM-WT 15000 present a similar state of development. Although the scapula KNM-WT 15000 is clearly larger than ATD6-118, these two specimens share some characteristics such as their relative narrowness and the value of the axilloglenoid and spinoglenoid angles. The glenoid fossa of ATD6-116 show a lateral orientation, whereas in ATD6-118 the glenoid fossa is slightly cranially oriented, but still within the range of variation of modern humans. The glenoid index of both ATD6-116 and ATD6-118 is low in accordance to the values usually observed in other early hominins, thus showing the primitive condition for this feature. Both scapulae show a ventrally placed axillary sulcus. The presence of this primitive feature in ATD-116 confirms that the shape of the axillary border has a genetic basis and it is not related to physical activity., (Published by Elsevier Ltd.)

Objective: The aim of our paper is to present a rare variation of the suprascapular vein, its incidence and clinical significance., Case Report: A rare case of a double suprascapular vein was observed in a digitalized human cadaver on Anatomage Table 5.0. The vein divided into two branches, one passing over the transverse scapular ligament, while the other one coursed underneath the ligament, inside the notch., Conclusion: This variation has major clinical importance as it is associated with the appearance of Suprascapular nerve entrapment syndrome., (Copyright © 2019 by Academy of Sciences and Arts of Bosnia and Herzegovina.)

BACKGROUND The occurrence of fractures and risks following reverse total shoulder arthroplasty (rTSA) is common due to the variation of scapular spine (SS). Therefore, the consideration of the variable osteological features of SS prior to surgery may prove to be significant for the implementation of rTSA. This study aimed to propose a classification of SS through particular and quantitative parameters. MATERIAL AND METHODS In total, 354 intact dry scapulae were geometrical measured and classified on account of anatomical characteristics and the shapes of SS. RESULTS Type I SS was found, and this was the most frequency was type (27.97%). The least common type was type II. The type of SS had a direct association with bone stock and bone mineral density. Type II represented an association with a much thinner spine and restricted cortical and cancellous bone; types II and V were also associated with a crooked SS, which had a more complex morphology. CONCLUSIONS This study offered a comprehensive classification of SS in the Chinese population. On the whole, this study indicates that knowledge of the morphological variations of SS can prompt the diagnosis of scapular fractures and can promote more successful rTSA procedures, and the relative clinical trial is necessary to support it.

BACKGROUND There are few studies on distributions or morphological measurements for bony spurs form at the attachment points of the ligaments and tendons on the coracoid process. The aim of this study was to investigate their most common sites and morphological characteristics, and to propose possible reasons. MATERIAL AND METHODS Scapulae with bony spurs on the coracoid process were selected from 377 intact and dry Chinese scapulae. The distribution, height, and transverse and longitudinal diameter of the bony spurs were measured in each coracoid process. RESULTS We selected 71 scapulae, 36 left and 35 right, that had bony spurs, from 377 scapulae. The bony spurs were most commonly located at the attachment point of the superior transverse scapular ligament (STSL) (31, 23.66%), while the trapezoid ligament (TL) accounted for the smaller proportion (8, 6.11%). The TSL was the highest, with the minimum transverse and longitudinal diameter, while the TL had the greatest transverse and longitudinal diameters. Only the TSL and TL had a statistically significant difference between the left and the right bony spur regarding the longitudinal diameter (P<0.05). CONCLUSIONS Bony spurs are more likely to form at the attachment points of ligaments and tendons on the coracoid process, which has a greater risk of traction injuries or attachment points avulsion fractures.

The white-footed tamarin (Saguinus leucopus) is an endangered endemic primate of Colombia, mainly due to the deforestation of its habitat and illegal trade, which generates a high incidence of these animals in wildlife care centres. Musculoskeletal system disorders in S. leucopus are one of the most common diseases and therefore the aim of this study was to contribute to the morphologic studies with a morphometric, anatomic and radiographic description of the scapula in this species to provide a basis for medical interventions, surgical approaches, radiologic diagnoses and comparative functions of this bone. Gross dissections of each scapular region were made in eight specimens without a diagnosis of osteomuscular disease. These specimens died from natural cases in the wildlife care centres of the Corporación Autónoma Regional de Caldas (CORPORCALDAS); after necropsy their carcasses were fixed with 10% formaldehyde, 5% mineral oil and 1% phenic acid in these centres over the course of at least 1 week. X-rays of the scapula were taken in the small animal clinic of the Universidad del Tolima, and morphometric data of the scapulae were obtained with a digital calliper. The scapula of the white-footed tamarin was a flat triangular bone with a deep scapular notch in its cranial margin, where there was a cranial transverse scapular ligament that was absent in two specimens. The coracoid process was highly developed, medially covering the humeral joint. The dorsal margin was covered by the scapular cartilage, which was highly developed in the caudal angle. In the dorsal fourth of the caudal margin, there was a surface from which the m. teres major originated. The lateral surface had a scapular spine with a long hamatus process of the acromion until the lateral part of the humeral joint. The infraspinatus fossa was wider than the supraspinous fossa. On the costal surface, the subscapular fossa was formed by three subscapular lines and one subscapular ridge, the latter helping to form the surface for the m. teres major. In the two radiographic views, caudocranial to the scapula and dorsoventral to the thorax, the scapular spine, acromion, coracoid process, scapular incisura, supraglenoid tubercle, caudal margin, subscapular ridge, and the joints with the clavicle and the humerus could be observed. The scapula of the white-footed tamarin presented bony reliefs that share characteristics with other primates but also with domestic mammals due to its quadrupedal locomotion, which allowed us to correlate its morphologic adaptation with its quadrupedal arboreal displacement., (© 2018 Anatomical Society.)

KNM-ER 47000A is a new 1.52 Ma hominin scapular fossil belonging to an associated partial skeleton from the Koobi Fora Formation, Kenya (FwJj14E, Area 1A). This fossil effectively doubles the record of Early Pleistocene scapulae from East Africa, with KNM-WT 15000 (early African Homo erectus) preserving the only other known scapula to date. KNM-ER 47000A consists of a complete glenoid cavity preserving a portion of the scapular spine and neck, the proximal half of the acromion, and a majority of the axillary border. A sufficient amount of anatomy is preserved to compare KNM-ER 47000A with scapulae of several Australopithecus species, extinct Homo, and living hominoids. The glenohumeral joint of KNM-ER 47000A is more laterally oriented than those of great apes and Australopithecus, aligning it closely with KNM-WT 15000 and modern humans. While this morphology does not imply a strong commitment to arboreality, its scapular spine is obliquely oriented-as in gorillas and some Australopithecus fossils-particularly when compared to the more horizontal orientation seen in KNM-WT 15000 and modern humans. Such a spine orientation suggests a narrow yet long infraspinous region, a feature that has been attributed to suspensory taxa. Accordingly, the morphology of KNM-ER 47000A presents conflicting behavioral implications. Nonetheless, a multivariate consideration of the available scapular traits aligns KNM-ER 47000A and Australopithecus with great apes, whereas KNM-WT 15000 resembles modern humans. The scapular morphology of KNM-ER 47000A is unique among fossil and extant hominoids and its morphological differences from KNM-WT 15000 strengthen the attribution of KNM-ER 47000 to Paranthropus boisei as opposed to early Homo. As the first evidence of scapular morphology in P. boisei, KNM-ER 47000A provides important new information on variation in hominin shoulder and upper limb anatomy from this critical period of hominin evolutionary history., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Introduction. The acromion is a small section of the scapula which extends anteriorly from the spine of the scapula and the acromial angle (AA) is a prominent bony point at the junction of the lateral border of the acromion and the spine of the shoulder blade. As is well known, the morphology of the acromion and the acromial angle are important as their anatomical variation may contribute to shoulder pathologies. However, few people have studied the morphology and the association between the acromion and the acromial angle. The study explores the acromion and the acromial angle in the anatomical morphology and the association, providing an anatomical basis for clinical diagnosis and treatment. Material and Methods. A total of 292 dry, intact scapulae (152 right, 140 left) were used in the study. Three types of the acromion were already measured, type I(flat shape), type II (curved shape), and type III (hooked shape), respectively. Three types of the acromial angles were also measured in this study, C shape, L shape, and Double Angle shape. Results. The research result shows that C shape and L shape were the most common, while Double Angle shape was the least common. C shape was often related to type I (flat shape) and L shape was often related to type II (curved shape). Conclusions. The presented data provides precise and well-sorted information about the acromion and the acromial angle variation in Chinese population, contributing to diagnosis and treating in shoulder pathology.

Objective: Classifications of posture deviations are only possible compared with standard values. However, standard values have been published for healthy male adults but not for female adults., Design: Observational study., Setting: Institute of Occupational Medicine, Social Medicine and Environmental Medicine, Goethe-University Frankfurt/Main., Participants: 106healthy female volunteers (21-30 years old; 25.1±2.7 years) were included. Their body weight ranged from 46 to 106 kg (60.3±7.9 kg), the heights from 1.53 to 1.82 m (1.69±0.06 m) and the body mass index from 16.9 kg/m² to 37.6 kg/m² (21.1±2.6 kg/m²)., Outcome Measures: A three-dimensional back scan was performed to measure the upper back posture in habitual standing. The tolerance ranges and CI were calculated. Group differences were tested by the Wilcoxon Mann-Whitney U test., Results: In normal posture, the spinal column was marginally twisted to the left, and the vertebrae were marginally rotated to the right. The kyphosis angle is larger than the lumbar angle. Consequently, a more kyphotic posture is observed in the sagittal plane. The habitual posture is slightly scoliotic with a rotational component (scapular depression right, right scapula marginally more dorsally, high state of pelvic right, iliac right further rotated anteriorly)., Conclusions: Healthy young women have an almost ideally balanced posture with minimal ventral body inclination and a marginal scoliotic deviation. Compared with young males, women show only marginal differences in the upper body posture. These values allow a comparison to other studies, both for control and patient data, and may serve as guideline in both clinical practice and scientific studies., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2018. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Introduction: In 2014, reverse total shoulder arthroplasty was approved in Japan. We were concerned that the base plate might be incompatible with Japanese who were generally smaller than Westerners. Therefore, we investigated the dimensions and morphology of the normal Japanese glenoid and compared with the normal French glenoid., Materials and Methods: One hundred Japanese shoulders without glenoid lesions (50 men and 50 women) were investigated and compared with 100 French shoulders (50 men and 50 women). Computed tomography was performed with 3-dimensional image reconstruction and images were analyzed using Glenosys software. Glenoid parameters (width, height, retroversion and inclination) were compared between Japanese and French subjects., Results: In Japanese subjects, the mean glenoid width was 25.5mm, height was 33.3mm, retroversion was 2.3° and inclination was 11.6° superiorly. In French subjects, the mean glenoid width was 26.7mm, height was 35.4mm, retroversion was 6.0° and inclination was 10.4° superiorly. Glenoid width and height were significantly smaller in Japanese subjects than French subjects (P=0.001 and P<0.001), while retroversion was significantly greater in French subjects (P<0.001). There was no significant difference of inclination., Conclusions: These findings will help surgeons to identify suitable patients for RSA and perform the procedure with appropriate preoperative planning., Level of Evidence: IV: retrospective or historical series., (Copyright © 2017 Elsevier Masson SAS. All rights reserved.)

Background: The critical shoulder angle (CSA) has been reported to be associated with rotator cuff disease and has been suggested as an etiology for cuff tears. However, it is unclear whether acromial morphologic characteristics such as CSA are a cause or effect because all studies to date have been retrospective., Questions/purposes: (1) How often can the CSA be reliably measured? (2) Is the CSA associated with rotator cuff disease? (3) Is the CSA correlated with baseline tear size or tear enlargement? (4) Does the CSA change with time?, Methods: In this retrospective comparison of longitudinally collected data, patients with asymptomatic rotator cuff tears underwent ultrasonography and standardized AP radiographs at enrollment and yearly thereafter during a median of 4 years. Three hundred ninety-five patients were included, of whom 14 were excluded as they were not yet eligible for 2-year followup and 68 (18%) were lost to followup, leaving 313 study patients who were evaluated with 1433 radiographs. Patients with adhesive capsulitis with normal rotator cuffs and radiographically normal scapulae were included as control subjects (119 subjects). Two observers (PNC, DS) measured the CSA in a blinded fashion. Radiographs that met Suter-Henninger criteria for CSA measurement reliability were included. For the study group, 179 of the 313 (57%) patients with radiographs that met Suter-Henninger criteria were further analyzed; the remainder were excluded from this study. For the control group, 50 of 119 (42%) subjects met criteria and were further analyzed. Tear enlargement was found in 94 patients, and the CSA was compared in patients with tears and control subjects, and in tears with or without enlargement, and was correlated with tear size. In a subgroup of the study group in which 59 of 179 patients had a minimum of 3 years between initial and followup radiographs, two CSA measurements were performed to measure change., Results: In total, of the 1552 radiographs evaluated, only 326 (21%) were of sufficient quality to measure the CSA. The CSA was higher among patients with cuff tears than control subjects (34° ± 4° versus 32° ± 4°; mean difference, 2.0°; 95% CI, 0.7°-3.2°; p = 0.003). The CSA did not correlate with baseline tear length (ρ = 0.22, p = 0.090) or width (ρ = 0.16, p = 0.229). The CSA was not different between tears that enlarged and those that were stable (34° ± 3° versus 34° ± 4°; mean difference, 0.2°; 95% CI, -0.9° to -1.4°; p = 0.683). The CSA did not change over time (CSA Time 1: mean 33° ± 4° SD; CSA Time 2: mean 33° ± 4° SD; mean difference, -0.2°; 95% CI, -0.6° to 0.1°; p = 0.253)., Conclusions: Even with a longitudinal protocol, most radiographs are of insufficient quality for CSA measurement. Although patients with a history of degenerative cuff disease have higher CSA values than control subjects, the difference is small enough that it could be influenced by measurement error in practice; in any case, a difference of the magnitude we observed is likely to be clinically unimportant. The CSA is not correlated with tear size or tear progression, and does not seem to change with time. These results suggest that the CSA is unlikely to be related to rotator cuff disease., Level of Evidence: Level II, prognostic study.

The dugong (Dugong dugon, Müller) is an endangered marine mammal species. We examined the relationship between sex, habitat and body length based on the skull and scapular morphology and morphometrics of 81 dugong samples in Thailand. A total of 58 parameters from the skull and scapula (25 from the cranium, 23 from the mandible and 10 from the scapula) as well as tusks were used in this study. Data were analyzed by univariate analysis, followed by discriminant analysis and multivariate linear regression. Here we show, 100% and 98.5% accuracy rates for sexing using large tusks and the skull, respectively. Scapular morphology using the caudal border tubercle and coracoid process showed 91.30% and 96.15% accuracy rates for identifying males and females. Skull morphometrics could categorize dugong habitat, i.e. living in the Andaman Sea or Gulf of Thailand, with 100% accuracy. Moreover, our model could be used to estimate body length with coefficient of determination (R 2 ) of 0.985. The results of our study showed that skull morphology and morphometric measurements could be used as a tool for sex identification, location identification and estimation of body length. But scapular morphology is the best tool for sex identification in dugongs.

Background: Placing the patient in the prone position frequently is required for some surgical procedures. If cardiac arrest occurs and the patient cannot be safely turned supine, cardiopulmonary resuscitation (CPR) may need to be performed with the patient in the prone position. Although clear landmarks have been defined for supine CPR, the optimal hand position for CPR in the prone position has not been clearly determined. The purpose of this study was to determine anatomically the optimal hand position for CPR in the prone position., Methods: We reviewed retrospectively the chest computed tomography images of 100 patients taken in the prone position. The vertebral body levels crossing the medial angle of the scapula, the inferior angle of the scapula, and the spinous process of the vertebral body connected to the most inferior rib were identified, and we selected the image level at which the left ventricular (LV) cross-sectional area was the largest. This level was defined as the optimal compression level and correlated to surface anatomical landmarks. We calculated the ratio of the distance from the C7 spinous process to the level of the largest LV cross-sectional area divided by the distance from the C7 spinous process to the spinous process of the vertebral body connected with the most inferior rib., Results: The level of the largest LV cross-sectional area in the prone position was 1 vertebral segment below the inferior angle of the scapula in 45% (99% confidence interval [CI], 33-58) of patients and 0 to 2 vertebral segments below that in 95% (99% CI, 86-98) of patients. The mean (SD) ratio of the distance from the C7 spinous process to the level of the largest LV cross-sectional area divided by the distance from the C7 spinous process to T12 spinous process was 67% ± 7% (99% CI, 65-69)., Conclusions: When the patient is positioned prone, the largest LV cross-sectional area is 0 to 2 vertebral segments below the inferior angle of the scapula in at least 86% of patients. Further studies are needed to determine whether this position is optimal for chest compressions in the prone position.

Background: Preoperative planning with the aid of imaging methods is a principal factor in successful surgery on the shoulder. This work aims to evaluate the variability of glenoid version, spiralling twist and scapular inclination in relation to the frontal axis. Studies focusing on measuring the variability of scapular inclination in the standardised rest position are lacking in the literature., Methods: We evaluated 104 CT scans of the shoulder. We measured the glenoid version with respect to the scapular axis at three levels. We measured the scapular inclination angle in relation to the sagittal plane and we determined scapular inclination in relation to the frontal axis. Statistical evaluation was performed using the marginal linear model and parameters were estimated using the generalised least squares method, which enables the dependency of measurements performed on the same subject to be taken into consideration., Results: The highest values of retroversion are attained by the glenoid in the cranial section (average -9.96°, range -29.7 to +13.2°). Proof of the spiralling twist is the decline in retroversion at the centre of the glenoid (average -2.09°, range -16.7 to +11.6°). Retroversion decreases further in the inferior direction (average -0.5°, range -20.9 to +17.5°). The average thoracoscapular angle is 45.46°, ranging from 13.1 to 69.0°. The average scapular inclination in relation to the frontal plane is 44.54°, ranging from 21.0 to76.9°., Conclusions: During preoperative planning, the surgeon should take into consideration not only the glenoid version in relation to the scapular axis, but also the value of the scapular inclination so as to eliminate possible surgical errors, optimise prosthesis implantation and thus decrease the risk of functional restrictions of the joint., Clinical Trial Registration: Ethics Committee for Multi-Centric Clinical Trials (EK-554/14,29thApril 2014).

Background: Deviant shoulder girdle movement is suggested as an eminent factor in the etiology of shoulder pain. Reliable measurements of shoulder girdle kinematics are a prerequisite for optimizing clinical management strategies., Purpose: The purpose of this study was to evaluate the reliability, measurement error, and internal consistency of measurements with performance-based clinical tests for shoulder girdle kinematics and positioning in patients with shoulder pain., Data Sources: The MEDLINE, Embase, CINAHL, and SPORTDiscus databases were systematically searched from inception to August 2015., Study Selection: Articles published in Dutch, English, or German were included if they involved the evaluation of at least one of the measurement properties of interest., Data Extraction: Two reviewers independently evaluated the methodological quality per studied measurement property with the 4-point-rating scale of the COSMIN (COnsensus-based Standards for the selection of health Measurement INstruments) checklist, extracted data, and assessed the adequacy of the measurement properties., Data Synthesis: Forty studies comprising more than 30 clinical tests were included. Actual reported measurements of the tests were categorized into: (1) positional measurement methods, (2) measurement methods to determine dynamic characteristics, and (3) tests to diagnose impairments of shoulder girdle function. Best evidence synthesis of the tests was performed per measurement for each measurement property., Limitations: All studies had significant limitations, including incongruence between test description and actual reported measurements and a lack of reporting on minimal important change. In general, the methodological quality of the selected studies was fair to poor., Conclusions: High-quality evidence indicates that measurements obtained with the Modified Scapular Assistance Test are not reliable for clinical use. Sound recommendations for the use of other tests could not be made due to inadequate evidence. Across studies, diversity in description, performance, and interpretation of similar tests was present, and different criteria were used to establish similar diagnoses, mostly without taking into account a clinically meaningful context. Consequently, these tests lack face validity, which hampers their clinical use. Further research on validity and how to integrate a clinically meaningful context of movement into clinical tests is warranted., (© 2017 American Physical Therapy Association)

Newly discovered early hominin fossil scapulae have bolstered investigations of scapular shape, which have long been used to interpret behavioral variation among primates. However, unexpected similarities between Pongo and Homo - particularly in scapular spine orientation - have raised questions about the functional utility of scapular morphology and its phylogenetic context in the hominin lineage. Not surprisingly, significant disagreement surrounds disparate morphological reconstructions of the modern human/African ape last common ancestor (LCA). Our study utilizes geometric morphometric (GM) approaches - two employing homologous, anatomical landmarks and a "spine-free" alternative using 98 sliding semilandmarks along the boundary of the subscapular fossa. The landmark-based "wireframe" GM analysis principally sorted groups by spine orientation: Homo and Pongo were similar to one another with more transversely-oriented spines as compared to Hylobates and the African apes. In contrast, Homo and Gorilla clustered together in our semilandmark analysis with superoinferiorly broad blades. Pan scapulae were similar, but had more mediolaterally compressed blades and laterally-positioned superior angles. Hylobates was superoinferiorly narrow, yet obliquely expanded relative to the vertebral border. Pongo scapulae were unique among hominoids in being nearly as broad as they were long. Previously documented 'convergence' of Homo and Pongo scapulae appears to be principally driven by similarities in spine orientation, rather than overall blade shape. Therefore, we contend that it is more parsimonious to reconstruct the African ape/Homo LCA scapula as being Gorilla-like, especially in light of similar characterizations of certain fossil hominin scapulae. Accordingly, the evolution of Pan (highly oblique spine and laterally-situated superior angle) and Homo (transversely-oriented spine) scapular morphology would have involved relatively minor shifts from this ancestral condition. These results support the prevailing molecular phylogeny and provide further insight into the behavioral implications of scapular shape in the LCA and fossil hominins., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Accurate sex estimation based on measurements of dimorphic dimensions in human unknown remains is important as the first step toward making individual identification. The purpose of this study was to assess the sexual dimorphism of the scapula and to quantify the accuracy of sex estimation in a contemporary Japanese forensic sample using scapular measurements based on three-dimensional (3D) computed tomographic (CT) images. A total of 218 cadavers (109 males, 109 females) that underwent postmortem CT and subsequent forensic autopsy were used. Ten scapular measurements were performed on 3D CT reconstructed images that extracted only bone data, and were analyzed using descriptive statistics and discriminant function analyses (DFA). All measurements were dimorphic in terms of sex differences. Univariate DFA provided sex classification accuracy rates of 75.7-91.3%. Stepwise DFA yielded sex prediction accuracy rates of 93.1-94.5%. In conclusion, the scapular measurements using 3D CT images of a contemporary Japanese population may be useful for the estimation of skeletal sex in the field of forensic anthropology., (Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.)

Background: The protractor method is a proposed clinical assessment tool, the first to measure vertical scapular position, that directly compares scapular and spinal landmarks. This tool has the potential to reliably and accurately measure excessive scapular elevation or depression., Objective: The purpose of this study was to determine reliability and validity of the protractor method to measure resting scapular position., Design: An interrater and intratester reliability and validity study was conducted., Methods: Testing was conducted on the same day by 2 physical therapists who were blinded to each other's results. The vertical distances between the spinous process of C7 and the superior margin of the medial aspect of the spine of the scapula (C7 method) and the spinous process of T8 and the inferior angle of the scapula (T8 method) were palpated and measured on the symptomatic shoulder in 34 people with current shoulder pain using the protractor method. Measurements were compared with 2-dimensional camera analysis to assess validity., Results: For intertester reliability, the standard error of measure, minimal detectable change, and intraclass correlation coefficient were 6.3 mm, 17.3 mm, and .78, respectively, for the C7 method and 5.7 mm, 15.7 mm, and .82, respectively, for the T8 method. For intratester reliability, the standard error of measure, minimal detectable change, and intraclass correlation coefficient were <0.9 mm, <2.5 mm, and .99, respectively. For validity, significant correlations (r) and mean differences were .83 and 10.1 mm, respectively, for the C7 method and .92 and 2.2 mm, respectively, for the T8 method., Limitation: The results of this study are limited to static measurement of the scapula in one plane., Conclusion: Both protractor methods were shown to have good reliability and acceptable validity, with the T8 method demonstrating superior clinical utility. The clinical use of the T8 method is recommended for measurement of excessive resting scapular elevation or depression., (© 2016 American Physical Therapy Association.)

The complexity of shoulder mechanics combined with the movement of skin relative to the scapula makes it difficult to measure shoulder kinematics with sufficient accuracy to distinguish between symptomatic and asymptomatic individuals. Multibody skeletal models can improve motion capture accuracy by reducing the space of possible joint movements, and models are used widely to improve measurement of lower limb kinematics. In this study, we developed a rigid-body model of a scapulothoracic joint to describe the kinematics of the scapula relative to the thorax. This model describes scapular kinematics with four degrees of freedom: 1) elevation and 2) abduction of the scapula on an ellipsoidal thoracic surface, 3) upward rotation of the scapula normal to the thoracic surface, and 4) internal rotation of the scapula to lift the medial border of the scapula off the surface of the thorax. The surface dimensions and joint axes can be customized to match an individual's anthropometry. We compared the model to "gold standard" bone-pin kinematics collected during three shoulder tasks and found modeled scapular kinematics to be accurate to within 2 mm root-mean-squared error for individual bone-pin markers across all markers and movement tasks. As an additional test, we added random and systematic noise to the bone-pin marker data and found that the model reduced kinematic variability due to noise by 65% compared to Euler angles computed without the model. Our scapulothoracic joint model can be used for inverse and forward dynamics analyses and to compute joint reaction loads. The computational performance of the scapulothoracic joint model is well suited for real-time applications; it is freely available for use with OpenSim 3.2, and is customizable and usable with other OpenSim models.

Introduction: Knowledge of morphological variations of the suprascapular region is important in the management of entrapment neuropathy and interventional procedures. The objective of this study was to collect data on the morphological features and dimensions of ossified ligaments and unusual bony tunnels of scapulae from a North Indian population., Methods: A total of 268 adult human scapulae of unknown gender were obtained from the bone bank of the Department of Anatomy, Dayanand Medical College and Hospital, Ludhiana, Punjab, India. The scapulae were evaluated for the incidence of ossified superior transverse scapular ligaments (STSLs), ossified inferior transverse scapular ligaments (ITSLs) and bony tunnels (i.e. the bony canal between the suprascapular notch and spinoglenoid notch), found along the course of the suprascapular nerve (SSN). The dimensions of these structures were measured and noted down. Ossified STSLs were classified based on their shape (i.e. fan- or band-shaped) and the dimensions of the ossified suprascapular openings (SSOs) were measured., Results: Ossified STSLs were present in 26 (9.7%) scapulae. Among the 26 scapulae, 16 (61.5%) were fan-shaped (mean area of SSO 16.6 mm(2)) and 10 (38.5%) were band-shaped (mean area of SSO 34.2 mm(2)). Bony tunnels were observed in 2 (0.75%) specimens, while an ossified ITSL was observed in 1 (0.37%) specimen., Conclusion: The data obtained in the present study augments the reference literature for SSN decompression and the existing anatomical databases, especially those on Indian populations. This data is useful to clinicians, radiologists and orthopaedic surgeons., (Copyright © Singapore Medical Association.)

The inclination of the scapular blade and the resting pose of the forelimb in dinosaurs differ among reconstructions and among skeletal mounts. For most dinosaurian taxa, no attempt has previously been made to quantify the correct resting positions of these elements. Here, we used data from skeletons preserved in articulation to quantify the resting orientations of the scapula and forelimb in dinosaurs. Specimens were included in the study only if they were preserved lying on their sides; for each specimen the angle between forelimb bones at a given joint was included in the analysis only if the joint was preserved in articulation. Using correlation analyses of the angles between the long axis of the sacrum, the first dorsal centrum, and the scapular blade in theropods and Eoraptor, we found that vertebral hyperextension does not influence scapular orientation in saurischians. Among examined taxa, the long axis of the scapular blade was found to be most horizontal in bipedal saurischians, most vertical in basal ornithopods, and intermediate in hadrosauroids. We found that in bipedal dinosaurs other than theropods with semilunate carpals, the resting orientation of the elbow is close to a right angle and the resting orientation of the wrist is such that the hand exhibits only slight ulnar deviation from the antebrachium. In theropods with semilunate carpals the elbow and wrist are more flexed at rest, with the elbow at a strongly acute angle and with the wrist approximately at a right angle. The results of our study have important implications for correct orientations of bones in reconstructions and skeletal mounts. Here, we provide recommendations on bone orientations based on our results.

Incidence of scapular spine (SS) fractures as a result of complications of reverse total shoulder arthroplasty is relatively high leading to inferior clinical outcomes and an increased risk of revision and dislocation. Fractures of SS because of trauma, including the acromion, constitute 6% to 23% of scapula fractures. The purpose of this study was to classify the SS and present specific geometrical parameters according to osteologic features. A total of 319 intact dry scapulae were collected and classified based on morphological characteristics and shape of the SS. Nine bony landmarks were also chosen and described for their relevance to regions of interest for scapular fixation. Five specific types of SS were noted and the most prevalent groups were Type 1 (Fusiform shape) (47.17%) and Type 5 (Horizontal S-shape) (19.18%). Overall, Types 3, 4, and 1 showed thicker landmark values compared to Type 5, with Type 2 having smaller values. Our classification into 5 distinct types allowed appreciation of the anatomical variance of SSs. The contours of Types 5 and 1 presented a more complex morphology and may lead to a worse surgical approach due to a fracture. As Types 2 and 5 were much thinner than the other types, these may be more susceptible to fractures.

Purpose: This study investigated the direct and continuous attachment of the labrum to the glenoid fossa, including the fibrocartilaginous tissue, using image-analysis software and histology., Methods: Twenty-six cadaveric shoulders (11 male, 15 female; mean age 80.1 years; age range 36-103 years) were used. The glenoid of each specimen was divided into six pie-slice-shaped pieces from the center perpendicular to the articular surface by radial incisions at the 2, 4, 6, 8, 10, and 12 o'clock positions. The general distribution of the labrum, including the fibrocartilage, was assessed in hematoxylin and eosin-, Safranin O- and Azan-Mallory-stained sections. The continuous length of attachment of the labrum to the glenoid was measured using image-analysis software. The width of attachment to the articular surface of the glenoid was assessed in each position., Results: The labrum attached to both the articular surface and the neck of the glenoid in all shoulders (100 %) in the 4 and 6 o'clock positions. The mean length of the entire attachment to the glenoid was 4.6 mm (range 3.2-6.1 mm). The width of attachment from the bony edge of the glenoid to the edge of the labrum on the articular surface ranged from 0 to 4.3 mm. The length of the entire attachment of the labrum was shortest in the 2 o'clock position (p = 0.229). Additionally, the length of the entire attachment of the labrum was longest in the 4 o'clock position. The width of attachment to the articular surface of the glenoid was greatest in the 4 o'clock position (p < 0.01)., Conclusion: In the 4 and 6 o'clock positions, the labrum attached to both the articular surface and neck of the glenoid in all of the shoulders (100 %). The length of the entire attachment to the labrum, including the fibrocartilage, was shortest in the 2 o'clock position. The width of attachment to the articular surface of the glenoid was greatest in the 4 o'clock position (p < 0.01).

This paper presents development of statistical shape models based on robust and rigid-groupwise registration followed by pointset nonrigid registration. The main advantages of the pipeline include automation in that the method does not rely on manual landmarks or a regionalization step; there is no bias in the choice of reference during the correspondence steps and the use of the probabilistic principal component analysis framework increases the domain of the shape variability. A comparison between the widely used expectation maximization-iterative closest point algorithm and a recently reported groupwise method on publicly available data (hippocampus) using the well-known criteria of generality, specificity, and compactness is also presented. The proposed method gives similar values but the curves of generality and specificity are superior to those of the other two methods. Finally, the method is applied to the human scapula, which is a known difficult structure, and the human humerus.

Powerful, accurate throwing may have been an important mode of early hunting and defense. Previous work has shown that throwing performance is functionally linked to several anatomical shifts in the upper body that occurred during human evolution. The final shift to occur is the inferior reorientation of the shoulder. Fossil scapulae show the earliest evidence of a more inferior glenoid in Homo erectus. However, where the scapula rests on the thorax is uncertain. The relative length of the clavicle, the only skeletal attachment of the scapula to the torso, is quite variable. Depending on which fossils or skeletal measures are used to reconstruct the H. erectus shoulder, either a novel, anteriorly facing shoulder configuration or a modern human-like lateral orientation is possible. These competing hypotheses have led to very different conclusions regarding the throwing ability and hunting behavior of early Homo. Here, we evaluate competing models of H. erectus shoulder morphology and examine how these models relate to throwing performance. To address these questions, we collected skeletal measures from fossil and extant taxa, as well as anthropometric (N = 36) and kinematic (N = 27) data from Daasanach throwers from northwestern Kenya. Our data show that all H. erectus fossil clavicles fall within the normal range of modern human variation. We find that a commonly used metric for normalizing clavicle length, the claviculohumeral ratio, poorly predicts shoulder position on the torso. Furthermore, no significant relationship between clavicle length and any measure of throwing performance was found. These data support reconstructing the H. erectus shoulder as modern human-like, with a laterally facing glenoid, and suggest that the capacity for high speed throwing dates back nearly two million years., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Scapular shape variation among primates is widely viewed as being strongly related to locomotor differences. The relative importance of overhead forelimb elevation in the locomotor repertoire of a species, as reflected in muscular leverage for scapular rotation or in the sizes of attachment areas for muscles involved in glenohumeral elevation, has proven to be a useful organizing principle for understanding this variation. While generally successful in sorting primate scapulae into functional groups, the scapulae of some species do not entirely match predictions based on the perceived importance of forelimb elevation. A recent study has shown that scapular fossa sizes in apes are not as accurate predictors of the sizes of the muscles arising from them as has been assumed. To further explore the degree of correspondence between actual and predicted muscle size based on the perceived importance of forelimb elevation, the current study examines the relative sizes of the rotator cuff muscles in a wider sample of primate taxa using published data on muscle mass and cross-sectional area. The results do not support some of the accepted generalizations about the relative sizes of members of the rotator cuff based on measurements of the sizes of scapular fossae. For example, orthograde apes do not display enlarged supraspinatus muscles compared to pronograde monkeys. Differences in assessments of relative muscle size based on mass compared to those based on cross-sectional area suggest that poor correspondence between muscle size predicted from scapular fossa size and actual muscle size may be related to constraints on scapular form associated with muscular leverage for scapular rotation and with scapular position on the thorax., (Copyright © 2015. Published by Elsevier Ltd.)

The high prevalence of rotator cuff tendinopathy in modern humans may be partly related to the shape acquired by the scapula as species changed throughout evolution. Here, we compared the anatomic features of the scapula across members of the Hominoid group. The results support the hypothesis that the scapula of Homo sapiens sapiens exhibits distinctive anatomic characteristics compared to that of other Hominoids. We studied 89 scapulae from five species. For each scapula, we measured eight parameters and determined six index. We then compared the results across species. We identified two distinctive characteristics of the lateral aspect of the human scapula, namely, a lateral orientation of the glenoid cavity and a narrow coraco-acromial arch. Similar to the gorilla acromion, the human one is steeply sloped and, above all, larger and squarer than the acromion of other Hominoids. These features may explain, in part at least, the pathogenesis of rotator cuff tendinopathy in modern man., (Copyright © 2014 Elsevier Masson SAS. All rights reserved.)

Purpose: Fractures of the scapular, or glenoid, neck are strongly debated in the relevant literature. Analysis of the respective studies, however, revealed a considerable confusion in terms of definition, terminology and diagnosis. In addition, there are few studies, primarily case reviews, dealing in detail with these fractures. The aim of this article is to present detailed information about fractures of the scapular neck, based on the analysis of our own experience and of the published literature., Material and Methods: Our group of 17 fractures of the scapular neck comprised 14 men and three women, with a mean age of 38 years (range, 24-55). The authors diagnosed four fractures of the anatomical neck, nine fractures of the surgical neck and five trans-spinous fractures of the neck. Of these 17 scapular neck fractures, six fractures were treated non-operatively, and 11 fractures were operated on via the posterior Judet approach. The mean follow-up was 4.9 years (range, 1-11)., Results: Fractures in all six non-operatively treated patients healed without complications in the anatomical position and with full function of the shoulder. In 11 operatively treated patients, all fractures of the scapula and clavicle healed within three months. In nine cases the function of the shoulder was subjectively and objectively assessed as normal, and in the remaining two cases as fair., Conclusion: The term "scapular, or glenoid, neck" covers three different types of fractures, i.e., fracture of the anatomical neck, fracture of the surgical neck and trans-spinous neck fracture. Fractures of the surgical neck are divided into stable, fractures with rotational instability and fully unstable fractures, depending on the integrity of the coracocacromial and coracoclavicular ligaments. Accurate diagnosis of fractures of the scapular neck requires 3D CT reconstructions. Undisplaced or minimally displaced fractures may be treated non-operatively, markedly displaced fractures constitute an indication for osteosynthesis via the Judet approach.

Introduction: Nerve can be compressed when traveling through any osteo-fibrous tunnel. Any eventual anatomic structure limiting this passage increases the risk of neuropathy. During dissection of the shoulder region we recognized a vein travelling on the inferior border of the suprascapular notch together with the suprascapular nerve. The aim of this work was to evaluate the morphological characteristics of this vein in cadaveric material., Materials and Methods: The suprascapular notch (SSN) region was dissected in 60 cadaveric shoulders. The course, number and diameter of nerve and vessels in the suprascapluar notch region were evaluated. Length, proximal and distal width of the superior transverse scapular ligament were measured. Photographic documentation was taken to evaluate the suprascapular nerve passage area., Results: The vein identified was named as the suprascapular notch vein. It was present in 58.3% of shoulders. In 11 specimens, it was double. Its mean diameter was 1.7 mm (SD 0.7 mm) and did not correlate with the suprascapular nerve passage area. A suprascapular notch vein co-occurred more often with the anterior coracoscapular ligament (ACSL). In comparison with the SSN without the ACSL, it has a significantly greater diameter (2 mm; SD 0.7 mm vs 1.5 mm; SD 0.6 mm, respectively; P=0.021)., Conclusions: The suprascapular notch vein was a common structure that did not replace the suprascapular vein. Its presence correlated with the occurrence of the ACSL and was independent of body side, STSL type and SSN type., Type of Study: Observational anatomic study., (Copyright © 2014 Elsevier Masson SAS. All rights reserved.)

The iconic tyrannosaurids were top predators in Asia and North America during the latest Cretaceous, and most species had deep skulls that allowed them to generate extreme bite forces. Two unusual specimens of Alioramus from Mongolia seem to indicate a divergent long-snouted body plan among some derived tyrannosaurids, but the rarity and juvenile nature of these fossils leaves many questions unanswered. Here, we describe a remarkable new species of long-snouted tyrannosaurid from the Maastrichtian of southeastern China, Qianzhousaurus sinensis. Phylogenetic analysis places Qianzhousaurus with both species of Alioramus in a novel longirostrine clade, which was geographically widespread across latest Cretaceous Asia and formed an important component of terrestrial ecosystems during this time. The new specimen is approximately twice the size as both Alioramus individuals, showing that the long-snouted morphology was not a transient juvenile condition of deep-snouted species, but a characteristic of a major tyrannosaurid subgroup.

Purpose: Humans differ from other great ape species in their propensity to develop tears of the rotator cuff. The aim of this study was to compare the anatomical risk factors for subacromial impingement and rotator cuff tears amongst the great apes and to determine which features may be accentuated in humans and therefore play a more significant role in disease aetiology., Methods: Orthogonal digital photographs of 22 human, 17 gorilla, 13 chimpanzee and 12 orangutan dry bone scapula specimens oriented in the glenoid plane were taken. Anatomical measurements were preformed using a calibrated digital image technique and the results scaled according to scapula vertebral border length., Results: Of the ten anatomical features associated with subacromial impingement and rotator cuff tears in humans, none were shown to be accentuated and significantly different to the other species studied. However the human supraspinatus fossa was shown to be significantly smaller., Conclusions: These results indicate that an alternative primary aetiological factor for rotator cuff tears must exist. A reduction in the size of the supraspinatus fossa in human scapulae suggests that structural insufficiency of the supraspinatus or a change in rotator cuff force vectors could play a role.

Patient-specific biomechanical models including patient-specific finite-element (FE) models are considered potentially important tools for providing personalized healthcare to patients with musculoskeletal diseases. A multi-step procedure is often needed to generate a patient-specific FE model. As all involved steps are associated with certain levels of uncertainty, it is important to study how the uncertainties of individual components propagate to final simulation results. In this study, we considered a specific case of this problem where the uncertainties of the involved steps were known and the aim was to determine the uncertainty of the predicted strain distribution. The effects of uncertainties of three important components of patient-specific models, including bone density, musculoskeletal loads and the parameters of the material mapping relationship on the predicted strain distributions, were studied. It was found that the number of uncertain components and the level of their uncertainty determine the uncertainty of simulation results. The 'average' uncertainty values were found to be relatively small even for high levels of uncertainty in the components of the model. The 'maximum' uncertainty values were, however, quite high and occurred in the areas of the scapula that are of the greatest clinical relevance. In addition, the uncertainty of the simulation result was found to be dependent on the type of movement analysed, with abduction movements presenting consistently lower uncertainty values than flexion movements.

Introduction: Detailed anatomical knowledge of the suprascapular notch (SSN) is important for the management of entrapment neuropathy and interventional procedures. The objective of the present study was to collect data on the morphological features and anatomical variations of the SSN in an Indian population., Methods: We studied 268 human scapulae of unknown sex (126 right-sided, 142 left-sided) taken from the Department of Anatomy, Dayanand Medical College and Hospital, India. SSNs were classified as either type I, II, III, IV or V, based on the shape of the inferior border of the incisura, and comparison of the SSN's vertical and transverse diameters. The shape of the SSN (i.e V- or U-shaped), if present, was also recorded., Results: Type II SSN was the most common (50.00%), followed by type I, type IV and type III (32.46%, 9.70% and 7.84%, respectively). For right-sided type II SSNs, the transverse and vertical diameters were 9.1 ± 3.2 mm and 5.2 ± 1.9 mm, respectively, while those for left-sided type ll SSNs were 9.2 ± 2.4 mm and 5.1 ± 1.8 mm, respectively. Generally, the transverse diameter of type II SSN was found to be greater than that of type III SSN. The incidence of U-shaped SSN was 51.49%, while that of V-shaped SSN was 2.99%., Conclusion: This study of the morphometrical characteristics and anatomical variations of SSN provides an anatomical database of SSN in the Indian context. This database will be of use in surgical procedures, as the information can be used to ensure adequate access to and complete decompression of the suprascapular nerve.

Objectives: To calculate the Scapular Balance Angle (SBA) reference values in a healthy population between 18 and 85 years old, and to define abnormality criteria for this sample., Materials and Methods: A descriptive study was conducted on a total of 300 individuals (mean age: 44.83, range: 18-83; proportion male/female: 1.59), calculating the SBA through manual measurement with a goniometer. An intraobserver Intraclass Correlation Coefficient (ICC) of 0.87 and a interobserver ICC of 0.84 was observed., Results: The values for the SBA in healthy population were 2.505 ± 2.340°. We define the abnormality criteria for this sample with an angle greater than 7.185°., Discussion: SBA manual measurement is a simple and reproducible assessment of the position and rotation of the scapula in clinical practice. The main findings of this study are the reference values for the SBA and a statistical cut-off to define abnormality., (Copyright © 2013 SECOT. Published by Elsevier Espana. All rights reserved.)

Background: Proterochersis robusta from the Late Triassic (Middle Norian) of Germany is the oldest known fossil turtle (i.e. amniote with a fully formed turtle shell), but little is known about its anatomy. A newly prepared, historic specimen provides novel insights into the morphology of the girdles and vertebral column of this taxon and the opportunity to reassess its phylogenetic position., Results: The anatomy of the pectoral girdle of P. robusta is similar to that of other primitive turtles, including the Late Triassic (Carnian) Proganochelys quenstedti, in having a vertically oriented scapula, a large coracoid foramen, a short acromion process, and bony ridges that connect the acromion process with the dorsal process, glenoid, and coracoid, and by being able to rotate along a vertical axis. The pelvic elements are expanded distally and suturally attached to the shell, but in contrast to modern pleurodiran turtles the pelvis is associated with the sacral ribs., Conclusions: The primary homology of the character "sutured pelvis" is unproblematic between P. robusta and extant pleurodires. However, integration of all new observations into the most complete phylogenetic analysis that support the pleurodiran nature of P. robusta reveals that this taxon is more parsimoniously placed along the phylogenetic stem of crown Testudines. All current phylogenetic hypotheses therefore support the basal placement of this taxon, imply that the sutured pelvis of this taxon developed independently from that of pleurodires, and conclude that the age of the turtle crown is Middle Jurassic.

The shoulder girdle of turtles has a triradiate morphology. Although its dorsal process represents the scapular blade, the skeletal identities of the two ventral processes remain uncertain. To elucidate the question, developmental patterns of the girdles were compared between Chinese soft-shelled turtles, chickens, and mice. Despite the morphological diversity of adults, the initial primordia of the shoulder girdles showed similar morphological patterns. The ventral two processes developed from the anlagen comparable to those of the acromion and the coracoid in other amniotes. The developmental pattern of the acromion is very similar among embryos, whereas that of the coracoid in mammals differs from that in non-mammals, implying that coracoids are not homologous between non-mammals and mammals. Therefore, amniotes have retained the ancestral pattern of the girdle anlage, and the shoulder girdle of turtles has been achieved through a transformation of the pattern in the late ontogenic period., (© 2013 Anatomical Society.)

Purpose: The shape and size of the suprascapular notch (SSN) is one of the most important risk factors in suprascapular nerve entrapment. The aim of the study was to perform a morphological study of SSN variations., Methods: A total of 616 computer tomography scans of scapulae were retrospectively analysed in 308 patients. The examination focused on the suprascapular region. The type of suprascapular notch was determined by using a classification based on three geometrical measurements: maximal depth (MD), superior (STD) and middle (MTD) transverse diameters., Results: In the scans, five types of SSN were noted. In type I (24.18%) maximal depth was greater than superior transverse diameter. Type II (1.95%) has equal MD, STD and MTD. In type III (56.16%) the superior transverse diameter was greater than the maximal depth. Scapulae with bony foramen were classified as type IV (4.72%). In type V a discrete notch (12.99 %) was found. Additionally, types I and III were divided into three subtypes: A, B and C. The frequency of type I and IV was lower in females than in males, but type III was more common in females than males. Distribution of other types of SSN in both groups was similar., Conclusion: Knowledge of the anatomical variations of the suprascapular notch described in this study should be helpful in endoscopic and open procedures of the suprascapular region and also may increase the safety of operative decompression of the suprascapular nerve.

Introduction: The bipedal gait and consequential freedom of the upper limb in human beings has made the movements of the shoulder joint a subject of extensive investigations. The scapular angles provide the base and leverage to various muscles and have been correlated with the different movements of the shoulder joint., Methods: In the present study, different angles of scapula namely superior, inferior, lateral, medial, acromial and coracoid angles were measured in the North Indian population. The study was conducted on 100 scapulas (R:L=50:50) obtained from Department of Anatomy, Government Medical College, Amritsar. For measuring the angles, centimetre scales and protractor were used., Results: The mean value of superior angle was observed to be 100.830 (R=100.320 : L=101.340); inferior angle was 63.620 (R=68.10:L=59.140); lateral angle was 61.720 (R=65.90 : L=57.540); medial angle was 147.640 (R=151.320 : L=143.960); acromial angle was 106.470 (R=107.680 : L=105.260) and coracoid angle was 83.30 (R=84.240:L=82.020)., Conclusions: It was observed that all angles were higher in the right sided bones except superior angle. Also a wide range was seen in all the angles.

Background: Better knowledge of the suprascapular notch anatomy may help to prevent and to assess more accurately suprascapular nerve entrapment syndrome. Our purposes were to verify the reliability of the existing data, to assess the differences between the two genders, to verify the correlation between the dimensions of the scapula and the suprascapular notch, and to investigate the relationship between the suprascapular notch and the postero-superior limit of the safe zone for the suprascapular nerve., Methods: We examined 500 dried scapulae, measuring seven distances related to the scapular body and suprascapular notch; they were also catalogued according to gender, age and side. Suprascapular notch was classified in accordance with Rengachary's method. For each class, we also took into consideration the width/depth ratio. Furthermore, Pearson's correlation was calculated., Results: The frequencies were: Type I 12.4%, Type II 19.8%, Type III 22.8%, Type IV 31.1%, Type V 10.2%, Type VI 3.6%. Width and depth did not demonstrate a statistical significant difference when analyzed according to gender and side; however, a significant difference was found between the depth means elaborated according to median age (73 y.o.). Correlation indexes were weak or not statistically significant. The differences among the postero-superior limits of the safe zone in the six types of notches was not statistically significant., Conclusions: Patient's characteristics (gender, age and scapular dimensions) are not related to the characteristics of the suprascapular notch (dimensions and Type); our data suggest that the entrapment syndrome is more likely to be associated with a Type III notch because of its specific features.

The turtle shell and the relationship of the shoulder girdle inside or 'deep' to the ribcage have puzzled neontologists and developmental biologists for more than a century. Recent developmental and fossil data indicate that the shoulder girdle indeed lies inside the shell, but anterior to the ribcage. Developmental biologists compare this orientation to that found in the model organisms mice and chickens, whose scapula lies laterally on top of the ribcage. We analyse the topological relationship of the shoulder girdle relative to the ribcage within a broader phylogenetic context and determine that the condition found in turtles is also found in amphibians, monotreme mammals and lepidosaurs. A vertical scapula anterior to the thoracic ribcage is therefore inferred to be the basal amniote condition and indicates that the condition found in therian mammals and archosaurs (which includes both developmental model organisms: chickens and mice) is derived and not appropriate for studying the developmental origin of the turtle shell. Instead, among amniotes, either monotreme mammals or lepidosaurs should be used.