Search

Cut-fill terraces occur throughout the western Andes where they have been associated with pluvial episodes on the Altiplano. The mechanism relating increased rainfall to sedimentation is however not well understood. Here, we apply a hillslope sediment model and reported cosmogenic nuclide concentrations in terraces to examine terrace formation in semi-arid escarpment environments. We focus on the Rio Pisco system in western Peru in order to determine probable hillslope processes and sediment transport conditions during phases of terrace formation. Specifically, we model steady state and transient hillslope responses to increased precipitation rates. The measured ter race distribution and reconstructed sediment loads measured for the Rio Pisco agree with the transient model predictions, suggesting strong climatic control on the cut-fill sequences in western Peru primarily through large variations in sediment load. Our model suggests that the ultimate control for these terraces is the availability of sediment on the hillslopes with hillslope stripping supplying large sediment loads early in wet periods. At the Rio Pisco, this is manifest as an approximately 4x increase in erosion rates during pluvial periods. We suggest that this mechanism may also control terrace occurrence in other semi-arid escarpment settings. [ABSTRACT FROM AUTHOR]

We investigated the mechanisms leading to the formation of tunnel valleys in the Swiss foreland near Bern. We proceeded through producing 3D maps of the bedrock topography based on drillhole information and a new gravimetric survey combined with modelling. In this context, the combination of information about the densities of the sedimentary fill and of the bedrock, together with published borehole data and the results of gravity surveys along 11 profiles across the valleys, served as input for the application of our 3D gravity modelling software referred to as PRISMA. This ultimately allowed us to model the gravity effect of the Quaternary fill of the overdeepenings and to produce cross-sectional geometries of these troughs. The results show that 2-3 km upstream of the city of Bern, the overdeepenings are approximately 3 km wide. They are characterized by steep to oversteepened lateral flanks and a wide flat base, which we consider as a U-shaped cross-sectional geometry. There, the maximum residual gravity anomaly ranges between - 3 to - 4 mGal for the Aare valley, which is the main overdeepening of the region. Modelling shows that this corresponds to a depression, which reaches a depth of c. 300 m a.s.l. Farther downstream approaching Bern, the erosional trough narrows by c. 1 km, and the base gets shallower by c. 100 m as revealed by drillings. This is supported by the results of our gravity surveys, which disclose a lower maximum gravity effect of c. - 0.8 to - 1.3 mGal. Interestingly, in the Bern city area, these shallow troughs with maximum gravity anomalies ranging from - 1.4 to - 1.8 mGal are underlain by one or multiple inner gorges, which are at least 100 m deep (based on drilling information) and only a few tens of meters wide (disclosed by gravity modelling). At the downstream end of the Bern area, we observe that the trough widens from 2 km at the northern border of Bern to c. 4 km approximately 2 km farther downstream, while the bottom still reaches c. 300 to 200 m a.s.l. Our gravity survey implies that this change is associated with an increase in the maximum residual anomaly, reaching values of - 2.5 mGal. Interestingly, the overdeepening's cross-sectional geometry in this area has steeply dipping flanks converging to a narrow base, which we consider as V-shaped. We attribute this shape to erosion by water either underneath or at the snout of a glacier, forming a gorge. This narrow bedrock depression was subsequently widened by glacial carving. In this context, strong glacial erosion upstream of the Bern area appears to have overprinted these traces. In contrast, beneath the city of Bern and farther downstream these V-shaped features have been preserved. Available chronological data suggest that the formation of this gorge occurred prior to MIS 8 and possibly during the aftermath of one of the largest glaciations when large fluxes of meltwater resulted in the fluvial carving into the bedrock., Supplementary Information: The online version contains supplementary material available at 10.1186/s00015-023-00447-y., Competing Interests: Competing interestsThe authors have no competing interests., (© The Author(s) 2023.)

Quantifications of in-situ denudation rates on vertical headwalls, averaged over millennia, have been thwarted because of inaccessibility. Here, we benefit from a tunnel crossing a large and vertical headwall in the European Alps (Eiger), where we measured concentrations of in-situ cosmogenic 36 Cl along five depth profiles linking the tunnel with the headwall surface. Isotopic concentrations of 36 Cl are low in surface samples, but high at depth relative to expectance for their position. The results of Monte-Carlo modelling attribute this pattern to inherited nuclides, young minimum exposure ages and to fast average denudation rates during the last exposure. These rates are consistently high across the Eiger and range from 45 ± 9 cm kyr -1 to 356 ± 137 cm kyr -1 (1σ) for the last centuries to millennia. These high rates together with the large inheritance point to a mechanism where denudation has been accomplished by frequent, cm-scale rock fall paired with chemical dissolution of limestone.

Terrestrial cosmogenic nuclide concentrations of detrital minerals yield catchment-wide rates at which hillslopes erode. These estimates are commonly used to infer millennial scale denudation patterns and to identify the main controls on mass-balance and landscape evolution at orogenic scale. The same approach can be applied to minerals preserved in stratigraphic records of rivers, although extracting reliable paleo-denudation rates from Ma-old archives can be limited by the target nuclide's half-life and by exposure to cosmic radiations after deposition. Slowly eroding landscapes, however, are characterized by the highest cosmogenic radionuclide concentrations; a condition that potentially allows pushing the method's limits further back in time, provided that independent constraints on the geological evolution are available. Here, we report 13-10 million-year-old paleo-denudation rates from northernmost Chile, the oldest 10 Be-inferred rates ever reported. We find that at 13-10 Ma the western Andean Altiplano has been eroding at 1-10 m/Ma, consistent with modern paces in the same setting, and it experienced a period with rates above 10 m/Ma at ~11 Ma. We suggest that the background tectono-geomorphic state of the western margin of the Altiplano has remained stable since the mid-Miocene, whereas intensified runoff since ~11 Ma might explain the transient increase in denudation.

Large sediment fluxes from mountain belts have the potential to cause megafans to prograde into the neighbouring sedimentary basins. These mechanisms have been documented based from numerical modelling and stratigraphic records. However, little attention has been focused on inferring temporal changes in the concentrations of supplied sediment from coarse-grained deposits. Here, we extract changes of this variable in the field from a Late Oligocene, c. 4 km-thick suite of fluvial conglomerates situated in the North Alpine foreland basin, which evolved in response to the tectonic and erosional history of the Alps. We measure a decrease in channel depths from >2 m to <1 m and an increase in the largest grain sizes from <15 cm to >20 cm from the base to the top of the suite. These constraints are used to calculate an increase in fan surface slopes from <0.3° to >1.0° based on the Shields criteria for sediment entrainment. We combine slope and bulk grain size data with the Bagnold equation for sediment transport to infer higher concentrations of the supplied sediment. We use these shifts to propose a change towards faster erosion and a steeper landscape in the Alpine hinterland, driven by mantle-scale processes beneath the Alps.

The stratigraphies of foreland basins have been related to orogeny, where continent-continent collision causes the construction of topography and the downwarping of the foreland plate. These mechanisms have been inferred for the Molasse basin, stretching along the northern margin of the European Alps. Continuous flexural bending of the subducting European lithosphere as a consequence of topographic loads alone would imply that the Alpine topography would have increased at least between 30 Ma and ca. 5-10 Ma when the basin accumulated the erosional detritus. This, however, is neither consistent with observations nor with isostatic mass balancing models because paleoaltimetry estimates suggest that the topography has not increased since 20 Ma. Here we show that a rollback mechanism for the European plate is capable of explaining the construction of thick sedimentary successions in the Molasse foreland basin where the extra slab load has maintained the Alpine surface at low, but constant, elevations.