Search

This paper investigates the causal effect of COVID-19 quarantine measures on the electricity consumption of different types of regulated customers. In particular, the average energy consumption of a group of customers in Chile is examined, exploiting the weekly variations in the application of the stages of the Step by Step Plan as a natural experiment. Step by Step Plan was the Chile COVID containment strategy, which involved implementing partial lockdowns based on the COVID incidence in the municipalities, and adjusted on a weekly basis. An econometric model is specified, and estimated using the technique Difference-in-Difference-in-Difference (DDD) to quantify the causal impact of these measures. After applying the model, it is found that the quarantine measures have had a negative effect on the trend weekly consumption of customers located in municipalities where some of the phases of the Plan have been applied. This effect is significantly different depending on each stage of the plan analysis, and statistically significant. It is also observed that, on average, the savings for a representative customer in the sample range from $ 8 to $ 6. 15 for some municipalities, and the sample costs range from $ 0. 02 to $ 0. 26 for others, depending on the municipality analyzed. The results can be expressed in a total of 2.95 tons less CO 2 emitted on a monthly basis. This shows a great impact in terms of sustainability and planning of energy demand and supply. • Quarantines by Covid 19 affected energy consumption, like a "Natural Experiment". • Using Panel Data of 400 thousand observations with geographic, temporal and Daylight Saving Time controls. • Difference-in-Difference-in-Difference method to quantify causal impact of quarantines on electric consumption. • Applying quarantines generated Energetic Savings from 8 cents to 6.15 dollars depending on client type. • An Event Study was designed to check the estimation results. [ABSTRACT FROM AUTHOR]

Purkinje cells (PCs) are more resistant to ischemia than myocardial cells, and are suspected to participate in ventricular arrhythmias following myocardial infarction (MI). Histological studies afford little evidence on the behavior and adaptation of PCs in the different stages of MI, especially in the chronic stage, and no quantitative data have been reported to date beyond subjective qualitative depictions. The present study uses a porcine model to present the first quantitative analysis of the distal cardiac conduction system and the first reported change in the spatial distribution of PCs in three representative stages of MI: an acute model both with and without reperfusion; a subacute model one week after reperfusion; and a chronic model one month after reperfusion. Purkinje cells are able to survive after 90 minutes of ischemia and subsequent reperfusion to a greater extent than cardiomyocytes. A decrease is observed in the number of PCs, which suffer reversible subcellular alterations such as cytoplasm vacuolization, together with redistribution from the mesocardium—the main localization of PCs in the heart of ungulate species—towards the endocardium and perivascular epicardial areas. However, these changes mainly occur during the first week after ischemia and reperfusion, and are maintained in the chronic stages. This anatomical substrate can explain the effectiveness of endo-epicardial catheter ablation of monomorphic ventricular tachycardias in the chronic scar after infarction, and sets a basis for further electrophysiological and molecular studies, and future therapeutic strategies. [ABSTRACT FROM AUTHOR]

Dynamin is a large GTPase that forms a helical collar at the neck of endocytic pits, and catalyzes membrane fission (Schmid and Frolov, 2011; Ferguson and De Camilli, 2012). Dynamin fission reaction is strictly dependent on GTP hydrolysis, but how fission is mediated is still debated (Antonny et al., 2016): GTP energy could be spent in membrane constriction required for fission, or in disassembly of the dynamin polymer to trigger fission. To follow dynamin GTP hydrolysis at endocytic pits, we generated a conformation-specific nanobody called dynab, that binds preferentially to the GTP hydrolytic state of dynamin-1. Dynab allowed us to follow the GTPase activity of dynamin-1 in real-time. We show that in fibroblasts, dynamin GTP hydrolysis occurs as stochastic bursts, which are randomly distributed relatively to the peak of dynamin assembly. Thus, dynamin disassembly is not coupled to GTPase activity, supporting that the GTP energy is primarily spent in constriction. [ABSTRACT FROM AUTHOR]

The combination of computational models and biophysical simulations can help to interpret an array of experimental data and contribute to the understanding, diagnosis and treatment of complex diseases such as cardiac arrhythmias. For this reason, three-dimensional (3D) cardiac computational modelling is currently a rising field of research. The advance of medical imaging technology over the last decades has allowed the evolution from generic to patient-specific 3D cardiac models that faithfully represent the anatomy and different cardiac features of a given alive subject. Here we analyse sixty representative 3D cardiac computational models developed and published during the last fifty years, describing their information sources, features, development methods and online availability. This paper also reviews the necessary components to build a 3D computational model of the heart aimed at biophysical simulation, paying especial attention to cardiac electrophysiology (EP), and the existing approaches to incorporate those components. We assess the challenges associated to the different steps of the building process, from the processing of raw clinical or biological data to the final application, including image segmentation, inclusion of substructures and meshing among others. We briefly outline the personalisation approaches that are currently available in 3D cardiac computational modelling. Finally, we present examples of several specific applications, mainly related to cardiac EP simulation and model-based image analysis, showing the potential usefulness of 3D cardiac computational modelling into clinical environments as a tool to aid in the prevention, diagnosis and treatment of cardiac diseases. [ABSTRACT FROM AUTHOR]

The combination of computational models and biophysical simulations can help to interpret an array of experimental data and contribute to the understanding, diagnosis and treatment of complex diseases such as cardiac arrhythmias. For this reason, three-dimensional (3D) cardiac computational modelling is currently a rising field of research. The advance of medical imaging technology over the last decades has allowed the evolution from generic to patient-specific 3D cardiac models that faithfully represent the anatomy and different cardiac features of a given alive subject. Here we analyse sixty representative 3D cardiac computational models developed and published during the last fifty years, describing their information sources, features, development methods and online availability. This paper also reviews the necessary components to build a 3D computational model of the heart aimed at biophysical simulation, paying especial attention to cardiac electrophysiology (EP), and the existing approaches to incorporate those components. We assess the challenges associated to the different steps of the building process, from the processing of raw clinical or biological data to the final application, including image segmentation, inclusion of substructures and meshing among others. We briefly outline the personalisation approaches that are currently available in 3D cardiac computational modelling. Finally, we present examples of several specific applications, mainly related to cardiac EP simulation and model-based image analysis, showing the potential usefulness of 3D cardiac computational modelling into clinical environments as a tool to aid in the prevention, diagnosis and treatment of cardiac diseases. [ABSTRACT FROM AUTHOR]

The development of biophysical models of the heart has the potential to get insights in the patho-physiology of the heart, which requires to accurately modeling anatomy and function. The electrical activation sequence of the ventricles depends strongly on the cardiac conduction system (CCS). Its morphology and function cannot be observed in vivo, and therefore data available come from histological studies. We present a review on data available of the peripheral CCS including new experiments. In order to build a realistic model of the CCS we designed a procedure to extract morphological characteristics of the CCS from stained calf tissue samples. A CCS model personalized with our measurements has been built using L-systems. The effect of key unknown parameters of the model in the electrical activation of the left ventricle has been analyzed. The CCS models generated share the main characteristics of observed stained Purkinje networks. The timing of the simulated electrical activation sequences were in the physiological range for CCS models that included enough density of PMJs. These results show that this approach is a potential methodology for collecting knowledge-domain data and build improved CCS models of the heart automatically. [ABSTRACT FROM PUBLISHER]

A methodology is presented here for automatic construction of a ventricular model of the cardiac conduction system (CCS), which is currently a missing block in many multiscale cardiac electromechanic models. It includes the His bundle, left bundle branches, and the peripheral CCS. The algorithm is fundamentally an enhancement of a rule-based method known as the Lindenmayer systems (L-systems). The generative procedure has been divided into three consecutive independent stages, which subsequently build the CCS from proximal to distal sections. Each stage is governed by a set of user parameters together with anatomical and physiological constrains to direct the generation process and adhere to the structural observations derived from histology studies. Several parameters are defined using statistical distributions to introduce stochastic variability in the models. The CCS built with this approach can generate electrical activation sequences with physiological characteristics. [ABSTRACT FROM AUTHOR]

The use of antiarrhythmic drugs is common to treat heart rhythm disorders. Computational modeling and simulation are promising tools that could be used to investigate the effects of specific drugs on cardiac electrophysiology. In this paper, we study the multiscale effects of dofetilide, a drug that blocks IKr, from cellular to organ level paying special attention to its effect on heart structures, in particular the specialized cardiac conduction system (CCS). We include a model of the CCS in a patient-specific anatomical ventricular model and study the drug effects in simulations with and without a CCS. Results confirmed the expected effects of dofetilide at cellular level, increasing the action potential duration, and at organ level, prolonging the QT segment. Notable differences are shown between models with and without the CCS on action potential duration distributions. These techniques show the importance of heart heterogeneity and the global effects of the interaction of drugs with cardiac structures. [ABSTRACT FROM AUTHOR]

Motivation: Designing mathematical tools that can formally describe the dynamics of complex intracellular processes remains a challenge. Live cell imaging reveals changes in the cellular states, but current simple approaches extract only minimal information of a static snapshot. [ABSTRACT FROM PUBLISHER]

Neuronal migration is essential for proper development of the cerebral cortex. As a first step, a postmitotic cell extends its leading process, presumably by adding new membrane at the growing tip. which would enable directed locomotion. The goal of the present study was to determine if biosynthetic exocytic pathway is polarized in migrating cells and whether polarized exocytosis promotes directed cell migration. A promising candidate for controlling the spatial sites of vesicle tethering and fusion at the plasma membrane is a protein complex called the exocyst. We found that cell migration in a wound assay, as well as cortical neuronal migration during embryonic development was impaired when the exocyst was disturbed. By combining TIRF microscopy and a stochastic model of exocytosis, we found that vesicle exocytosis is preferentially distributed close to the leading edge of polarized cells, that the exocytic process is organized into hotspots, and that the polarized delivery of vesicles and their clustering in hotspots depend on the intact exocyst complex. The exocyst complex seems to achieve this spatial regulation by determining the sites at the membrane where secretory vesicles tether. Thus, our study supports the notion that polarized membrane traffic regulated by the exocyst is an essential component of cell migration and that its deficit may lead to cortical abnormalities involving cortical neuronal malpositioning. [ABSTRACT FROM AUTHOR]

Analyzing spatiotemporal dependencies between different types of events is highly relevant to many biological phenomena (e.g., signaling and trafficking), especially as advances in probes and microscopy have facilitated the imaging of dynamic processes in living cells. For many types of events, the segmented areas can overlap spatially and temporally, forming random clumps. In this paper, we model the binary image sequences of two different event types as a realization of a bivariate temporal random set and propose a nonparametric approach to quantify spatial and spatiotemporal interrelations using the pair correlation, cross-covariance, and the Ripley IK functions. Based on these summary statistics, we propose a randomization procedure to test independence between event types by applying random toroidal shifts and Monte Carlo tests. A simulation study assessed the performance of the proposed estimators and showed that these statistics capture the spatiotemporal dependencies accurately. The estimation of the spatiotemporal interval of interactions was also obtained. The method was successfully applied to analyze the interdependencies of several endocytic proteins using image sequences of living cells and validated the procedure as a new way to automatically quantify dependencies between proteins in a formal and robust manner. [ABSTRACT FROM AUTHOR]

Counting spatially and temporally overlapping events in image sequences and estimating their shape-size and duration features are important issues in some applications. We propose a stochastic model, a particular case of the nonisotropic 3D Boolean model, for performing this analysis: the temporal Boolean model. Some probabilistic properties are derived and a methodology for parameter estimation from time-lapse image sequences is proposed using an explicit treatment of the temporal dimension. We estimate the mean number of germs per unit area and time, the mean grain size and the duration distribution. A wide simulation study in order to assess the proposed estimators showed promising results. The model was applied on biological image sequences of in- vivo cells in order to estimate new parameters such as the mean number and duration distribution of endocytic events. Our results show that the proposed temporal Boolean model is effective for obtaining information about dynamic processes which exhibit short-lived, but spatially and temporally overlapping events. [ABSTRACT FROM AUTHOR]

Cardiac Purkinje networks are a fundamental part of the conduction system and are known to initiate a variety of cardiac arrhythmias. However, patient-specific modeling of Purkinje networks remains a challenge due to their high morphological complexity. This work presents a novel method based on optimization principles for the generation of Purkinje networks that combines geometric and activation accuracy in branch size, bifurcation angles, and Purkinje-ventricular-junction activation times. Three biventricular meshes with increasing levels of complexity are used to evaluate the performance of our approach. Purkinje-tissue coupled monodomain simulations are executed to evaluate the generated networks in a realistic scenario using the most recent Purkinje/ventricular human cellular models and physiological values for the Purkinje-ventricular-junction characteristic delay. The results demonstrate that the new method can generate patient-specific Purkinje networks with controlled morphological metrics and specified local activation times at the Purkinje-ventricular junctions. [ABSTRACT FROM AUTHOR]

The combination of computational models and biophysical simulations can help to interpret an array of experimental data and contribute to the understanding, diagnosis and treatment of complex diseases such as cardiac arrhythmias. For this reason, three-dimensional (3D) cardiac computational modelling is currently a rising field of research. The advance of medical imaging technology over the last decades has allowed the evolution from generic to patient-specific 3D cardiac models that faithfully represent the anatomy and different cardiac features of a given alive subject. Here we analyse sixty representative 3D cardiac computational models developed and published during the last fifty years, describing their information sources, features, development methods and online availability. This paper also reviews the necessary components to build a 3D computational model of the heart aimed at biophysical simulation, paying especial attention to cardiac electrophysiology (EP), and the existing approaches to incorporate those components. We assess the challenges associated to the different steps of the building process, from the processing of raw clinical or biological data to the final application, including image segmentation, inclusion of substructures and meshing among others. We briefly outline the personalisation approaches that are currently available in 3D cardiac computational modelling. Finally, we present examples of several specific applications, mainly related to cardiac EP simulation and model-based image analysis, showing the potential usefulness of 3D cardiac computational modelling into clinical environments as a tool to aid in the prevention, diagnosis and treatment of cardiac diseases. [ABSTRACT FROM AUTHOR]

Personalized cardiac electrophysiology simulations have demonstrated great potential to study cardiac arrhythmias and help in therapy planning of radio-frequency ablation. Its application to analyze vulnerability to ventricular tachycardia and sudden cardiac death in infarcted patients has been recently explored. However, the detailed multi-scale biophysical simulations used in these studies are very demanding in terms of memory and computational resources, which prevents their clinical translation. In this work, we present a fast phenomenological system based on cellular automata (CA) to simulate personalized cardiac electrophysiology. The system is trained on biophysical simulations to reproduce cellular and tissue dynamics in healthy and pathological conditions, including action potential restitution, conduction velocity restitution and cell safety factor. We show that a full ventricular simulation can be performed in the order of seconds, emulate the results of a biophysical simulation and reproduce a patient's ventricular tachycardia in a model that includes a heterogeneous scar region. The system could be used to study the risk of arrhythmia in infarcted patients for a large number of scenarios. [ABSTRACT FROM AUTHOR]

In this paper, we present a modeling methodology to couple the cardiac conduction system to cardiac myocytes through a model of Purkinje-ventricular junctions to yield fast and realistic electrical activation of the ventricles. A patient-specific biventricular geometry is obtained from processing computed tomography scan data. A one-manifold implementation of the fast marching method based on Eikonal-type equations is used for modeling heart electrophysiology, which facilitates the multiscale 1-D–3-D coupling at very low computational costs. The method is illustrated in in-silico experiments where we analyze and compare alternative pacing strategies on the same patient-specific anatomy. We also show very good agreement between the results from the proposed approach and more detailed and comprehensive biophysical models for modeling cardiac electrophysiology. The effect of atrioventricular delay on the distribution of activation time in myocardium is studied with two experiments. Given the reasonable computational times and realistic activation sequences provided by our method, it can have an important clinical impact on the selection of optimal implantation sites of pacing leads or placement of ablation catheter’s tip in the context of cardiac rhythm management therapies. [ABSTRACT FROM AUTHOR]

The Purkinje system is a heart structure responsible for transmitting electrical impulses through the ventricles in a fast and coordinated way to trigger mechanical contraction. Estimating a patient-specific compatible Purkinje Network from an electro-anatomical map is a challenging task, that could help to improve models for electrophysiology simulations or provide aid in therapy planning, such as radiofrequency ablation. In this study, we present a methodology to inversely estimate a Purkinje network from a patient’s electro-anatomical map. First, we carry out a simulation study to assess the accuracy of the method for different synthetic Purkinje network morphologies and myocardial junction densities. Second, we estimate the Purkinje network from a set of 28 electro-anatomical maps from patients, obtaining an optimal conduction velocity in the Purkinje network of 1.95 ± 0.25 m/s, together with the location of their Purkinje-myocardial junctions, and Purkinje network structure. Our results showed an average local activation time error of 6.8±2.2 ms in the endocardium. Finally, using the personalized Purkinje network, we obtained correlations higher than 0.85 between simulated and clinical 12-lead ECGs. [ABSTRACT FROM AUTHOR]

Phosphatidylinositol 4,5-bisphosphate [PI(4,5)P2], a phosphoinositide concentrated predominantly in the plasma membrane, binds endocytic clathrin adaptors, many of their accessory factors, and a variety of actin-regulatory proteins. Here we have used fluorescent fusion proteins and total internal reflection fluorescence microscopy to investigate the effect of acute PI(4,5)P2 breakdown on the dynamics of endocytic clathrin-coated pit components and of the actin regulatory complex, Arp2/3. PI(4,5)P2 breakdown was achieved by the inducible recruitment to the plasma membrane of an inositol 5-phosphatase module through the rapamycin/FRB/FKBP system or by treatment with ionomycin. PI(4,5)P2 depletion resulted in a dramatic loss of clathrin puncta, which correlated with a massive dissociation of endocytic adaptors from the plasma membrane. Remaining clathtin spots at the cell surface had only weak fluorescence and were static over time. Dynamin and the p20 subunit of the Arp2/3 actin regulatory complex, which were concentrated at late-stage clathrincoated pits and in lamellipodia, also dissociated from the plasma membrane, and these changes correlated with an arrest of motility at the cell edge. These findings demonstrate the critical importance of PI(4,5)P2 in clathrin coat dynamics and Arp2/3-dependent actin regulation. [ABSTRACT FROM AUTHOR]

Contribution: A novel project-based learning (PBL) approach applicable to diverse design-oriented engineering courses. This article reports the application results during six academic years (2012/13 to 2017/18) for electronic instrumentation (EI) course for third-year Industrial Electronic and Automation Engineering majors. Background: Engineering education should prepare students to specify, design, and validate systems interacting with stakeholders in complex professional scenarios. Intended Outcomes: The general aim of the course was to train students in the specification, design, and validation of real-world instrumentation systems, promoting the development of expertise and deep understanding of fundamental concepts and techniques. Application Design: The students, working in teams, were tasked with the specification, design, and development of different instrumentation projects. They had to exchange information about their projects with other teams and discuss design decisions, thus creating a multiple-case experience. In addition, each team acted as a provider of a different team and as a client of another team, in a circular client–provider relationship. This student-centered learning process was supported and complemented with guided teaching of fundamental concepts, principles, and techniques and with continuous evaluation, complemented with rigorous individual exams. The project activities, lectures, and problem-solving classes were coordinated to optimize the process of developing the students’ understanding and expertise. Findings: Based on the academic results and the feedback from the students obtained along the years through two different anonymous surveys, it is concluded that most of the students achieved the expected learning outcomes, i.e., learning to design EI systems and dealing with stakeholders. Analyzed results proved that students were very satisfied with the methodology. [ABSTRACT FROM AUTHOR]

Anatomically based procedures to ablate atrial fibrillation (AF) are often successful in terminating paroxysmal AF. However, the ability to terminate persistent AF remains disappointing. New mechanistic approaches use multiple-electrode basket catheter mapping to localize and target AF drivers in the form of rotors but significant concerns remain about their accuracy. We aimed to evaluate how electrode-endocardium distance, far-field sources and inter-electrode distance affect the accuracy of localizing rotors. Sustained rotor activation of the atria was simulated numerically and mapped using a virtual basket catheter with varying electrode densities placed at different positions within the atrial cavity. Unipolar electrograms were calculated on the entire endocardial surface and at each of the electrodes. Rotors were tracked on the interpolated basket phase maps and compared with the respective atrial voltage and endocardial phase maps, which served as references. Rotor detection by the basket maps varied between 35–94% of the simulation time, depending on the basket’s position and the electrode-to-endocardial wall distance. However, two different types of phantom rotors appeared also on the basket maps. The first type was due to the far-field sources and the second type was due to interpolation between the electrodes; increasing electrode density decreased the incidence of the second but not the first type of phantom rotors. In the simulations study, basket catheter-based phase mapping detected rotors even when the basket was not in full contact with the endocardial wall, but always generated a number of phantom rotors in the presence of only a single real rotor, which would be the desired ablation target. Phantom rotors may mislead and contribute to failure in AF ablation procedures. [ABSTRACT FROM AUTHOR]

Non-invasive localization of continuous atrial ectopic beats remains a cornerstone for the treatment of atrial arrhythmias. The lack of accurate tools to guide electrophysiologists leads to an increase in the recurrence rate of ablation procedures. Existing approaches are based on the analysis of the P-waves main characteristics and the forward body surface potential maps (BSPMs) or on the inverse estimation of the electric activity of the heart from those BSPMs. These methods have not provided an efficient and systematic tool to localize ectopic triggers. In this work, we propose the use of machine learning techniques to spatially cluster and classify ectopic atrial foci into clearly differentiated atrial regions by using the body surface P-wave integral map (BSPiM) as a biomarker. Our simulated results show that ectopic foci with similar BSPiM naturally cluster into differentiated non-intersected atrial regions and that new patterns could be correctly classified with an accuracy of 97% when considering 2 clusters and 96% for 4 clusters. Our results also suggest that an increase in the number of clusters is feasible at the cost of decreasing accuracy. [ABSTRACT FROM AUTHOR]

The specialised conducting tissues present in the ventricles are responsible for the fast distribution of the electrical impulse from the atrio-ventricular node to regions in the subendocardial myocardium. Characterisation of anatomical features of the specialised conducting tissues in the ventricles is highly challenging, in particular its most distal section, which is connected to the working myocardium via Purkinje-myocardial junctions. The goal of this work is to characterise the architecture of the distal section of the Purkinje network by differentiating Purkinje cells from surrounding tissue, performing a segmentation of Purkinje fibres at cellular scale, and mathematically describing its morphology and interconnections. Purkinje cells from rabbit hearts were visualised by confocal microscopy using wheat germ agglutinin labelling. A total of 16 3D stacks including labeled Purkinje cells were collected, and semi-automatically segmented. State-of-the-art graph metrics were applied to estimate regional and global features of the Purkinje network complexity. Two types of cell types, tubular and star-like, were characterised from 3D segmentations. The analysis of 3D imaging data confirms the previously suggested presence of two types of Purkinje-myocardium connections, a 2D interconnection sheet and a funnel one, in which the narrow side of a Purkinje fibre connect progressively to muscle fibres. The complex network analysis of interconnected Purkinje cells showed no small-world connectivity or assortativity properties. These results might help building more realistic computational PK systems at high resolution levels including different cell configurations and shapes. Better knowledge on the organisation of the network might help in understanding the effects that several treatments such as radio-frequency ablation might have when the PK system is disrupted locally. [ABSTRACT FROM AUTHOR]

Cameras are essential parts of portable devices, such as smartphones and tablets. Most people have a smartphone and can take pictures anywhere and anytime to record their lives. However, these pictures captured by cameras may suffer from noise contamination, causing issues for subsequent image analysis, such as image recognition, object tracking, and classification of an object in the image. This paper develops an effective combinational denoising framework based on the proposed Adaptive and Overlapped Average Filtering (AOAF) and Mixed-pooling Attention Refinement Networks (MARNs). First, we apply AOAF to the noisy input image to obtain a preliminarily denoised result, where noisy pixels are removed and recovered. Next, MARNs take the preliminary result as the input and output a refined image where details and edges are better reconstructed. The experimental results demonstrate that our method performs favorably against state-of-the-art denoising methods. [ABSTRACT FROM AUTHOR]