Search

Planet formation models are necessary to understand the origins of diverse planetary systems. Circumstellar disc substructures have been proposed as preferred locations of planet formation but a complete formation scenario has not been covered by a single model so far. We aim to study the formation of giant planets facilitated by disc substructure and starting with sub-micron-sized dust. We connect dust coagulation and drift, planetesimal formation, $N$-body gravity, pebble accretion, planet migration, planetary gas accretion and gap opening in one consistent modelling framework. We find rapid formation of multiple gas giants from the initial disc substructure. The migration trap near the substructure allows the formation of cold gas giants. A new pressure maximum is created at the outer edge of the planetary gap, which triggers the next generation of planet formation resulting in a compact chain of giant planets. A high planet formation efficiency is achieved as the first gas giants are effective in preventing dust from drifting further inwards, which preserves materials for planet formation. Sequential planet formation is a promising framework to explain the formation of chains of gas and ice giants., Comment: Updated version. 12 pages, 6 figures, in press, A&A

[abridged]Photoevaporation and dust-trapping are individually considered to be important mechanisms in the evolution and morphology of protoplanetary disks. We studied how the presence of early substructures affects the evolution of the dust distribution and flux in the millimeter continuum of disks that are undergoing photoevaporative dispersal. We also tested if the predicted properties resemble those observed in the population of transition disks. We used the numerical code Dustpy to simulate disk evolution considering gas accretion, dust growth, dust-trapping at substructures, and mass loss due to X-ray and EUV (XEUV) photoevaporation and dust entrainment. Then, we compared how the dust mass and millimeter flux evolve for different disk models. We find that, during photoevaporative dispersal, disks with primordial substructures retain more dust and are brighter in the millimeter continuum than disks without early substructures, regardless of the photoevaporative cavity size. Once the photoevaporative cavity opens, the estimated fluxes for the disk models that are initially structured are comparable to those found in the bright transition disk population ($F_\textrm{mm} > 30\, \textrm{mJy}$), while the disk models that are initially smooth have fluxes comparable to the transition disks from the faint population ($F_\textrm{mm} < 30\, \textrm{mJy}$), suggesting a link between each model and population. Our models indicate that the efficiency of the dust trapping determines the millimeter flux of the disk, while the gas loss due to photoevaporation controls the formation and expansion of a cavity, decoupling the mechanisms responsible for each feature. In consequence, even a planet with a mass comparable to Saturn could trap enough dust to reproduce the millimeter emission of a bright transition disk, while its cavity size is independently driven by photoevaporative dispersal., Comment: Accepted for publication in A&A

[Abridged] Aims. We provide an important step toward a better understanding of the magnetorotational instability (MRI)-dust coevolution in protoplanetary disks by presenting a proof of concept that dust evolution ultimately plays a crucial role in the MRI activity. Methods. First, we study how a fixed power-law dust size distribution with varying parameters impacts the MRI activity, especially the steady-state MRI-driven accretion, by employing and improving our previous 1+1D MRI-driven turbulence model. Second, we relax the steady-state accretion assumption in this disk accretion model, and partially couple it to a dust evolution model in order to investigate how the evolution of dust (dynamics and grain growth processes combined) and MRI-driven accretion are intertwined on million-year timescales. Results. Dust coagulation and settling lead to a higher gas ionization degree in the protoplanetary disk, resulting in stronger MRI-driven turbulence as well as a more compact dead zone. On the other hand, fragmentation has an opposite effect because it replenishes the disk in small dust particles. Since the dust content of the disk decreases over million years of evolution due to radial drift, the MRI-driven turbulence overall becomes stronger and the dead zone more compact until the disk dust-gas mixture eventually behaves as a grain-free plasma. Furthermore, our results show that dust evolution alone does not lead to a complete reactivation of the dead zone. Conclusions. The MRI activity evolution (hence the temporal evolution of the MRI-induced $\alpha$-parameter) is controlled by dust evolution and occurs on a timescale of local dust growth, as long as there is enough dust particles in the disk to dominate the recombination process for the ionization chemistry. Once it is no longer the case, it is expected to be controlled by gas evolution and occurs on a viscous evolution timescale., Comment: 23 pages, 13 figures, Accepted for publication in A&A

The nucleosynthetic isotope dichotomy between carbonaceous (CC) and non-carbonaceous (NC) meteorites has been interpreted as evidence for spatial separation and the coexistence of two distinct planet-forming reservoirs for several million years in the solar protoplanetary disk. The rapid formation of Jupiter's core within one million years after the formation of calcium-aluminium-rich inclusions (CAIs) has been suggested as a potential mechanism for spatial and temporal separation. In this scenario, Jupiter's core would open a gap in the disk and trap inward-drifting dust grains in the pressure bump at the outer edge of the gap, separating the inner and outer disk materials from each other. We performed simulations of dust particles in a protoplanetary disk with a gap opened by an early-formed Jupiter core, including dust growth and fragmentation as well as dust transport, using the dust evolution software DustPy. Our numerical experiments indicate that particles trapped in the outer edge of the gap rapidly fragment and are transported through the gap, contaminating the inner disk with outer disk material on a timescale that is inconsistent with the meteoritic record. This suggests that other processes must have initiated or at least contributed to the isotopic separation between the inner and outer Solar System., Comment: Accepted for publication in Astronomy & Astrophysics Letters

Many processes during the evolution of protoplanetary disks and during planet formation are highly sensitive to the sizes of dust particles that are present in the disk: The efficiency of dust accretion in the disk and volatile transport on dust particles, gravoturbulent instabilities leading to the formation of planetesimals, or the accretion of pebbles onto large planetary embryos to form giant planets are typical examples of processes that depend on the sizes of the dust particles involved. Furthermore, radiative properties like absorption or scattering opacities depend on the particle sizes. To interpret observations of dust in protoplanetary disks, a proper estimate of the dust particle sizes is needed. We present DustPy - A Python package to simulate dust evolution in protoplanetary disks. DustPy solves gas and dust transport including viscous advection and diffusion as well as collisional growth of dust particles. DustPy is written with a modular concept, such that every aspect of the model can be easily modified or extended to allow for a multitude of research opportunities., Comment: Accepted for publication in ApJ. Installation via "pip install dustpy"

Context. The water snowline divides dry and icy solid material in protoplanetary disks, and has been thought to significantly affect planet formation at all stages. If dry particles break up more easily than icy ones, then the snowline causes a traffic jam, because small grains drift inward at lower speeds than larger pebbles. Aims. We aim to evaluate the effect of high dust concentrations around the snowline onto the gas dynamics. Methods. Using numerical simulations, we model the global radial evolution of an axisymmetric protoplanetary disk. Our model includes particle growth, evaporation and recondensation of water, and the back-reaction of dust onto the gas, taking into account the vertical distribution of dust particles. Results. We find that the dust back-reaction can stop and even reverse the net flux of gas outside the snowline, decreasing the gas accretion rate onto the star to under $50\%$ of its initial value. At the same time the dust accumulates at the snowline, reaching dust-to-gas ratios of $\epsilon \gtrsim 0.8$, and delivers large amounts of water vapor towards the inner disk, as the icy particles cross the snowline. However, the accumulation of dust at the snowline and the decrease in the gas accretion rate only take place if the global dust-to-gas ratio is high ($\varepsilon_0 \gtrsim 0.03$), if the viscous turbulence is low ($\alpha_\nu \lesssim 10^{-3} $), if the disk is large enough ($r_c \gtrsim 100\, \textrm{au}$), and only during the early phases of the disk evolution ($t \lesssim 1\, \textrm{Myr}$). Otherwise the dust back-reaction fails to perturb the gas motion., Comment: 18 pages, 19 figures. Accepted in A&A. Revised version after the referee report

RW Aur A has experienced various dimming events in the last years, decreasing its brightness by $\sim 2\ \textrm{mag}$ for periods of months to years. Multiple observations indicate that a high concentration of dust grains, from the protoplanetary disk's inner regions, is blocking the starlight during these events. We propose a new mechanism that can send large amounts of dust close to the star on short timescales, through the reactivation of a dead zone in the protoplanetary disk. Using numerical simulations we model the accretion of gas and dust, along with the growth and fragmentation of particles in this scenario. We find that after the reactivation of the dead zone, the accumulated dust is rapidly accreted towards the star in around 15 years, at rates of $\dot{M}_\textrm{d} = 6 \times 10^{-6}\, \textrm{M}_\odot/\textrm{yr}$ and reaching dust-to-gas ratios of $\epsilon \approx 5$, preceding an increase in the gas accretion by a few years. This sudden rise of dust accretion can provide the material required for the dimmings, although the question of how to put the dust into the line of sight remains open to speculation., Comment: Accepted for publication in ApJ

Context. Ice lines are suggested to play a significant role in grain growth and planetesimal formation in protoplanetary disks. Evaporation fronts directly influence the gas and ice abundances of volatile species in the disk and therefore the coagulation physics and efficiency and the chemical composition of the resulting planetesimals. Aims. In this work we investigate the influence of the existence of the CO ice line on the particle growth and on the distribution of CO in the disk. Methods. We include the possibility of tracking the CO content and/or other volatiles in particles and in the gas in our existing dust coagulation and disk evolution model and developed a method for evaporation and condensation of CO using the Hertz-Knudsen equation. Our model does not include fragmentation, yet, which will be part of further investigations. Results. We find no enhanced grain growth just outside the ice line where the particle size is limited by radial drift. Instead we find a depletion of solid material inside the ice line which is solely due to evaporation of the CO. Such a depression inside the ice line may be observable and may help to quantify the processes described in this work. Furthermore, we find that the viscosity and diffusivity of the gas heavily influence the re-distribution of vaporized CO at the ice line and can lead to an increase in the CO abundance by up to a factors of a few in the region just inside the ice line. Depending on the strength of the gaseous transport mechanisms the position of the ice line in our model can change by up to 10 AU and consequently, the temperature at that location can range from 21 K to 23 K., Comment: Accepted to A&A. 16 pages, 11 figures

Solving the mystery of the origin of chondrules is one of the most elusive goals in the field of meteoritics. Recently the idea of planet(esimal) collisions releasing splashes of lava droplets, long considered out of favor, has been reconsidered as a possible origin of chondrules by several papers. One of the main problems with this idea is the lack of quantitative and simple models that can be used to test this scenario by directly comparing to the many known observables of chondrules. In Paper I of this series we presented a simple thermal evolution model of a spherically symmetric expanding cloud of molten lava droplets that is assumed to emerge from a collision between two planetesimals. In the present paper, number II of this series, we use this model to calculate whether or not volatile elements such as Na and K will remain abundant in these droplets or whether they will get depleted due to evaporation. The high density of the droplet cloud (e.g. small distance between adjacent droplets) causes the vapor to quickly reach saturation pressure and thus shutting down further evaporation. We show to which extent, and under which conditions, this keeps the abundances of these elements high, as is seen in chondrules. We find that for most parameters of our model (cloud mass, expansion velocity, initial temperature) the volatile elements Mg, Si and Fe remain entirely in the chondrules. The Na and K abundances inside the droplets will initially stay mostly at their initial values due to the saturation of the vapor pressure, but at some point start to drop due to the cloud expansion. However, as soon as the temperature starts to decrease, most or all of the vapor recondenses again. At the end the Na and K elements retain most of their initial abundances, albeit occasionally somewhat reduced, depending on the parameters of the expanding cloud model., Comment: Accepted for publication in ApJ

The formation of chondrules is one of the oldest unsolved mysteries in meteoritics and planet formation. Recently an old idea has been revived: the idea that chondrules form as a result of collisions between planetesimals in which the ejected molten material forms small droplets which solidify to become chondrules. Pre-melting of the planetesimals by radioactive decay of 26Al would help producing sprays of melt even at relatively low impact velocity. In this paper we study the radiative cooling of a ballistically expanding spherical cloud of chondrule droplets ejected from the impact site. We present results from a numerical radiative transfer models as well as analytic approximate solutions. We find that the temperature after the start of the expansion of the cloud remains constant for a time t_cool and then drops with time t approximately as T ~ T_0[(3/5)t/t_cool+ 2/5]^(-5/3) for t>t_cool. The time at which this temperature drop starts t_cool depends via an analytical formula on the mass of the cloud, the expansion velocity and the size of the chondrule. During the early isothermal expansion phase the density is still so high that we expect the vapor of volatile elements to saturate so that no large volatile losses are expected.