Search

The impact of sea spray aerosol (SSA) on climate depends on the size and chemical composition of individual particles that make up the total SSA ensemble. There remains a lack of understanding as to the composition of individual particles within the SSA ensemble and how it changes in response to dynamic ocean biology. Here, we characterize the classes of organic compounds as well as specific molecules within individual SSA particles. The diversity of molecules within the organic fraction was observed to vary between submicrometer- and supermicrometer-sized particles and included contributions from fatty acids, monosaccharides, polysaccharides, and siliceous material. Significant changes in this molecular diversity were observed to coincide with the rise and fall of phytoplankton and heterotrophic bacteria populations within the seawater. Furthermore, the water uptake of individual particles was affected, as learned from studying the hygroscopicity of model systems composed of representative mixtures of salts and organic compounds.

Conodonts are an extinct group of primitive jawless vertebrates whose elements represent the earliest examples of a mineralized feeding apparatus in vertebrates. Their relative relationship within vertebrates remains unresolved. As teeth, conodont elements are not homologous with the dentition of vertebrates, but they exhibit similarities in mineralization, growth patterns, and function. They clearly represent an early evolutionary experiment in mineralized dentition and offer insight into analogous dentition in other groups. Unfortunately, analysis of functional performance has been limited to a handful of derived morphologies and material properties that may inform ecology and functional analysis are virtually unknown. Here we applied a nanoscale approach to evaluate material properties of conodont bioapatite by utilizing Atomic Force Microscopy (AFM) nanoindentation to determine Young's modulus (E) along multiple elements representing different ontogenetic stages of development in the coniform-bearing apparatus of Dapsilodus obliquicostatus. We observed extreme and systematic variation in E along the length (oral to aboral) of each element that largely mirrors the spatial and ontogenetic variability in the crystalline structure of these specimens. Extreme spatial variability of E likely contributed to breakage of elements that were regularly repaired/regrown in conodonts but later vertebrate dentition strategies that lacked the ability to repair/regrow likely required the development of different material properties to avoid structural failure., (© 2022. The Author(s).)

A key regulator of collective cell migrations, which drive development and cancer metastasis, is substrate stiffness. Increased substrate stiffness promotes migration and is controlled by Myosin. Using Drosophila border cell migration as a model of collective cell migration, we identify, for the first time, that the actin bundling protein Fascin limits Myosin activity in vivo. Loss of Fascin results in: increased activated Myosin on the border cells and their substrate, the nurse cells; decreased border cell Myosin dynamics; and increased nurse cell stiffness as measured by atomic force microscopy. Reducing Myosin restores on-time border cell migration in fascin mutant follicles. Further, Fascin's actin bundling activity is required to limit Myosin activation. Surprisingly, we find that Fascin regulates Myosin activity in the border cells to control nurse cell stiffness to promote migration. Thus, these data shift the paradigm from a substrate stiffness-centric model of regulating migration, to uncover that collectively migrating cells play a critical role in controlling the mechanical properties of their substrate in order to promote their own migration. This understudied means of mechanical regulation of migration is likely conserved across contexts and organisms, as Fascin and Myosin are common regulators of cell migration., Competing Interests: ML, CK, TL, SM, YL, AT, TT No competing interests declared, (© 2021, Lamb et al.)

Atmospheric aerosols are suspended particulate matter of varying composition, size, and mixing state. Challenges remain in understanding the impact of aerosols on the climate, atmosphere, and human health. The effect of aerosols depends on their physicochemical properties, such as their hygroscopicity, phase state, and surface tension. These properties are dynamic with respect to the highly variable relative humidity and temperature of the atmosphere. Thus, experimental approaches that permit the measurement of these dynamic properties are required. Such measurements also need to be performed on individual, submicrometer-, and supermicrometer-sized aerosol particles, as individual atmospheric particles from the same source can exhibit great variability in their form and function. In this context, this review focuses on the recent emergence of atomic force microscopy as an experimental tool in physical, analytical, and atmospheric chemistry that enables such measurements. Remaining challenges are noted and suggestions for future studies are offered.

Understanding the role of sea spray aerosol (SSA) on climate and the environment is of great interest due to their high number concentration throughout the Earth's atmosphere. Despite being of fundamental importance, direct surface tension measurements of SSA relevant sub-micrometer particles are rare, largely due to their extremely small volumes. Herein, atomic force microscopy (AFM) is used to directly measure the surface tension of individual sub-micrometer SSA particle mimics at ambient temperature and varying relative humidity (RH). Specifically, we probed both atmospherically relevant and fundamentally important model systems including electrolyte salts, dicarboxylic acids, and saccharides as single components and mixtures. Our results show that the single particle surface tension depends on RH or solute mole percentage and chemical composition. Moreover, for liquid droplets at and below 100 Pa s in viscosity, or at corresponding RH, we show good agreement between the AFM single particle and the bulk solution surface tension measurements at overlapping concentration ranges. Thus, direct surface tension measurements of individual particles using AFM is shown over a wide range of chemical systems as a function of RH, solute mole percentage, and viscosity than previously reported.

[This corrects the article DOI: 10.1039/C4SC03716B.].

Aerosol particles influence global climate by determining cloud droplet number concentrations, brightness, and lifetime. Primary aerosol particles, such as those produced from breaking waves in the ocean, display large particle-particle variability in chemical composition, morphology, and physical phase state, all of which affect the ability of individual particles to accommodate water and grow into cloud droplets. Despite such diversity in molecular composition, there is a paucity of methods available to assess how particle-particle variability in chemistry translates to corresponding differences in aerosol hygroscopicity. Here, an approach has been developed that allows for characterization of the distribution of aerosol hygroscopicity within a chemically complex population of atmospheric particles. This methodology, when applied to the interpretation of nascent sea spray aerosol, provides a quantitative framework for connecting results obtained using molecular mimics generated in the laboratory with chemically complex ambient aerosol. We show that nascent sea spray aerosol, generated in situ in the Atlantic Ocean, displays a broad distribution of particle hygroscopicities, indicative of a correspondingly broad distribution of particle chemical compositions. Molecular mimics of sea spray aerosol organic material were used in the laboratory to assess the volume fractions and molecular functionality required to suppress sea spray aerosol hygroscopicity to the extent indicated by field observations. We show that proper accounting for the distribution and diversity in particle hygroscopicity and composition are important to the assessment of particle impacts on clouds and global climate.

Understanding the interactions of water with atmospheric aerosols is crucial for determining the size, physical state, reactivity, and climate impacts of this important component of the Earth's atmosphere. Here we show that water uptake and hygroscopic growth of multicomponent, atmospherically relevant particles can be size dependent when comparing 100 nm versus ca. 6 μm sized particles. It was determined that particles composed of ammonium sulfate with succinic acid and of a mixture of chlorides typical of the marine environment show size-dependent hygroscopic behavior. Microscopic analysis of the distribution of components within the aerosol particles show that the size dependence is due to differences in the mixing state, that is, whether particles are homogeneously mixed or phase separated, for different sized particles. This morphology-dependent hygroscopicity has consequences for heterogeneous atmospheric chemistry as well as aerosol interactions with electromagnetic radiation and clouds.

Surface tension, an important property of liquids, is easily measured for bulk samples. However, for droplets smaller than one micron in size, there are currently no reported measurements. In this study, atomic force microscopy (AFM) and force spectroscopy have been utilized to measure surface tension of individual submicron sized droplets at ambient pressure and controlled relative humidity (RH). Since the surface tension of atmospheric aerosols is a key factor in understanding aerosol climate effects, three atmospherically relevant systems (NaCl, malonic and glutaric acids) were studied. Single particle AFM measurements were successfully implemented in measuring the surface tension of deliquesced particles on the order of 200 to 500 nm in diameter. Deliquesced particles continuously uptake water at high RH, which changes the concentration and surface tension of the droplets. Therefore, surface tension as a function of RH was measured. AFM based surface tension measurements are close to predicted values based on bulk measurements and activities of these three chemical systems. Non-ideal behaviour in concentrated organic acid droplets is thought to be important and the reason for differences observed between bulk solution predictions and AFM data. Consequently, these measurements are crucial in order to improve atmospheric climate models as direct measurements hitherto have been previously inaccessible due to instrument limitations.

An assay was developed for measuring the active-site concentration, activity, and thereby the catalytic turnover rate (k cat) of an immobilized dihydrofolate reductase model system (Singh et al., (2015), Anal. Biochem). This data article contains a calibration plot for the developed assay. In the calibration plot rate is plotted as a function of DHFR concentration and shows linear relationship. The concentration of immobilized enzyme was varied by using 5 different size mica chips. The dsDNA concentration was the same for all chips, assuming that the surface area of the mica chip dictates the resulting amount of bound enzyme (i.e. larger sized chip would have more bound DHFR). The activity and concentration of each chip was measured.

Scanning transmission X-ray microscopy combined with near-edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS) and optical microscopy coupled with Fourier transform infrared spectroscopy (micro-FTIR) have been applied to observe hygroscopic growth and chemical changes in malonic acid particles deposited on substrates. The extent of the hygroscopic growth of particles has been quantified in terms of the corresponding water-to-solute ratios (WSR) based on STXM/NEXAFS and micro-FTIR data sets. WSR values derived separately from two applied methods displayed a remarkable agreement with previous data reported in the literature. Comparison of NEXAFS and FTIR spectra acquired at different relative humidity (RH) shows efficient keto-enol tautomerization of malonic acid, with the enol form dominating at higher RH. The keto-enol equilibrium constants were calculated using relevant peak intensities in the carbon and oxygen K-edge NEXAFS spectra as a function of RH. We report strong dependence of the equilibrium constant on RH, with measured values of 0.18 ± 0.03, 1.11 ± 0.14, and 2.33 ± 0.37 corresponding to 2, 50, and 90% RH, respectively. Enols are important intermediates in aldol condensation reactions pertaining to formation and atmospheric aging of secondary organic aerosol (SOA). The present knowledge assumes that constituents of atmospheric deliquesced particles undergo aqueous chemistry with kinetic and equilibrium constants analogous to reactions in bulk solutions, which would estimate absolute dominance of the keto form of carboxylic acids. For instance, the keto-enol equilibrium constant of malonic acid in diluted aqueous solution is <10(-4). Our results suggest that in deliquesced micrometer-size particles, carboxylic acids may exist in predominantly enol forms that need to be explicitly considered in atmospheric aerosol chemistry.

Carbonaceous particles originating from biomass burning can account for a large fraction of organic aerosols in a local environment. Presently, their composition, physical and chemical properties, as well as their environmental effects are largely unknown. Tar balls, a distinct type of highly spherical carbonaceous biomass burn particles, have been observed in a number of field campaigns. The Yosemite Aerosol Characterization Study that took place in summer 2002 occurred during an active fire season in the western United States; tar balls collected during this field campaign are described in this article. Scanning transmission X-ray microscopy and near-edge X-ray absorption fine structure spectroscopy are used to determine the shape, structure, and size-dependent chemical composition of approximately 150 individual spherical particles ranging in size from 0.15 to 1.2 mum. The elemental composition of tar balls is approximately 55% atomic carbon and approximately 45% atomic oxygen. Oxygen is present primarily as carboxylic carbonyls and oxygen-substituted alkyl (O-alkyl-C) functional groups, followed by moderate amounts of ketonic carbonyls. The observed chemical composition, density, and carbon functional groups are distinctly different from soot or black carbon and more closely resemble high molecular weight polymeric humic-like substances, which could account for their reported optical properties. A detailed examination of the carboxylic carbonyl and O-alkyl-C functional groups as a function of particle size reveals a thin oxygenated interface layer. The high oxygen content, as well as the presence of water-soluble carboxylic carbonyl groups, could account for the reported hygroscopic properties of tar balls. The presence of the oxygenated layer is attributed to atmospheric processing of biomass burn particles.

We investigated the physical and chemical changes induced in soot aggregates exposed to laser radiation using a scanning mobility particle sizer, a transmission electron microscope, and a scanning transmission x-ray microscope to perform near-edge x-ray absorption fine structure spectroscopy. Laser-induced nanoparticle production was observed at fluences above 0.12 J/cm(2) at 532 nm and 0.22 J/cm(2) at 1064 nm. Our results indicate that new particle formation proceeds via (1) vaporization of small carbon clusters by thermal or photolytic mechanisms, followed by homogeneous nucleation, (2) heterogeneous nucleation of vaporized carbon clusters onto material ablated from primary particles, or (3) both processes.

Single-molecule electrical conduction studies are used to evaluate how the molecular linking unit influences the tunneling efficiency in metal-molecule-metal (m-M-m) junctions. This work uses conducting-probe atomic force microscopy (CP-AFM) to compare the molecular conduction of two pi-bonded molecules: one with a single thiol linker, and another with a conjugated double thiol linker at both ends of the molecules. The results demonstrate that the molecule with conjugated double thiol linkers displays higher conduction in gold-molecule-gold junctions than nonconjugated single thiol-gold contacts.