Search

Plasma-enhanced atomic layer deposition (ALD) is a common method for fabricating Hf0.5Zr0.5O2 (HZO) ferroelectric thin films that can be performed using direct-plasma (DP) and remote-plasma (RP) methods. This study proposed co-plasma ALD (CPALD), where DPALD and RPALD are applied simultaneously. HZO films fabricated using this method showed wake-up-free polarization properties, no anti-ferroelectricity, and high fatigue endurance when DPALD and RPALD started simultaneously. To minimize defects in the film that could negatively affect the low polarization properties and fatigue endurance, the direct plasma power was reduced to 75 W. Thus, excellent fatigue endurance for at least 109 cycles was obtained under a high total remanent polarization of 47.3 μC/cm2 and an applied voltage of 2.5 V. X-ray photoelectron spectroscopy and transmission electron microscopy were used to investigate the mechanisms responsible for these properties. The HZO films fabricated by CPALD contained few lattice defects (such as nonstoichiometric hafnium, nonlattice oxygen, and residual carbon) and no paraelectric phase (m-phase). This was attributed to the low-carbon residuals in the film, as high-energy activated radicals were supplied by the adsorbed precursors during film formation. This facilitated a smooth transition to the o-phase during heat treatment, which possessed ferroelectric properties. [ABSTRACT FROM AUTHOR]

We aimed to fabricate reliable memory devices using HfO2, which is gaining attention as a charge-trapping layer material for next-generation NAND flash memory. To this end, a new atomic layer deposition process using sequential remote plasma (RP) and direct plasma (DP) was designed to create charge-trapping memory devices. Subsequently, the operational characteristics of the devices were analyzed based on the thickness ratio of thin films deposited using the sequential RP and DP processes. As the thickness of the initially RP-deposited thin film increased, the memory window and retention also increased, while the interface defect density and leakage current decreased. When the thickness of the RP-deposited thin film was 7 nm, a maximum memory window of 10.1 V was achieved at an operating voltage of ±10 V, and the interface trap density (Dit) reached a minimum value of 1.0 × 1012 eV−1cm−2. Once the RP-deposited thin film reaches a certain thickness, the ion bombardment effect from DP on the substrate is expected to decrease, improving the Si/SiO2/HfO2 interface and thereby enhancing device endurance and reliability. This study confirmed that the proposed sequential RP and DP deposition processes could resolve issues related to unstable interface layers, improve device performance, and enhance process throughput. [ABSTRACT FROM AUTHOR]

Optimization of equipment structure and process conditions is essential to obtain thin films with the required properties, such as film thickness, trapped charge density, leakage current, and memory characteristics, that ensure reliability of the corresponding device. In this study, we fabricated metal–insulator–semiconductor (MIS) structure capacitors using HfO2 thin films separately deposited by remote plasma (RP) atomic layer deposition (ALD) and direct-plasma (DP) ALD and determined the optimal process temperature by measuring the leakage current and breakdown strength as functions of process temperature. Additionally, we analyzed the effects of the plasma application method on the charge trapping properties of HfO2 thin films and properties of the interface between Si and HfO2. Subsequently, we synthesized charge-trapping memory (CTM) devices utilizing the deposited thin films as charge-trapping layers (CTLs) and evaluated their memory properties. The results indicated excellent memory window characteristics of the RP-HfO2 MIS capacitors compared to those of the DP-HfO2 MIS capacitors. Moreover, the memory characteristics of the RP-HfO2 CTM devices were outstanding as compared to those of the DP-HfO2 CTM devices. In conclusion, the methodology proposed herein can be useful for future implementations of multiple levels of charge-storage nonvolatile memories or synaptic devices that require many states. [ABSTRACT FROM AUTHOR]

Hf0.5Zr0.5O2 (HZO) thin film exhibits ferroelectric properties and is presumed to be suitable for use in next-generation memory devices because of its compatibility with the complementary metal–oxide–semiconductor (CMOS) process. This study examined the physical and electrical properties of HZO thin films deposited by two plasma-enhanced atomic layer deposition (PEALD) methods— direct plasma atomic layer deposition (DPALD) and remote plasma atomic layer deposition (RPALD)—and the effects of plasma application on the properties of HZO thin films. The initial conditions for HZO thin film deposition, depending on the RPALD deposition temperature, were established based on previous research on HZO thin films deposited by the DPALD method. The results show that as the measurement temperature increases, the electric properties of DPALD HZO quickly deteriorate; however, the RPALD HZO thin film exhibited excellent fatigue endurance at a measurement temperature of 60 °C or less. HZO thin films deposited by the DPALD and RPALD methods exhibited relatively good remanent polarization and fatigue endurance, respectively. These results confirm the applicability of the HZO thin films deposited by the RPALD method as ferroelectric memory devices. [ABSTRACT FROM AUTHOR]