Search

Transmissive and reflective metasurfaces have been extensively studied for generating an orbital angular momentum (OAM)-carrying beam. However, the existing OAM generators suffer from feed blockage, large profile, OAM mode nonreconfigurable, and narrowband. An OAM generator that integrates multiple functions into a single module is in high demand in OAM-based applications. In this study, we proposed an OAM generator based on a folded reflectarray with high-gain low-profile broadband and programmable characteristics. The proposed multifunctional OAM generator, comprising half the volume of the normal OAM metasurfaces, can generate a high-gain $l=0$ , $l=+1$ , and $l=+2$ OAM-mode-reconfigurable beams with high mode purity over the frequency range of 9.5–10.5 GHz. The proposed OAM generator-integrated multiple functions have potential applications in OAM-based wireless communications and radar detection. [ABSTRACT FROM AUTHOR]

A novel method for the development of a reconfigurable cavity bandpass filter using fluid dielectric is proposed. Dielectric material can produce an effective permittivity ϵeff of the resonant mode when it is loaded into the cavity. Thus, a tube filled with fluid dielectric, e.g., distilled water, can achieve controlled and reversible ϵeff by adjusting the amount of water in the tube. The same manner of resonant frequency can be achieved as the resonant frequency is related to ϵeff, and then frequency tuning is realized. The fluid property can realize easier and faster tuning mechanism than conventional solid dielectric. As ϵeff is affected by the loaded dielectric parallel to the electric field, a triple-mode resonator with resonant modes TE101, TE011, and TM110, which have orthogonal electric fields, is investigated to realize tri-band reconfiguration. The ϵeff, as well as the resonant frequencies, corresponding to each mode can be individually controlled by adjusting their related water posts. Then, reconfigurable single-band and tri-band bandpass filters are designed. A reconfigurable tri-band cavity filter using a triple-mode cavity resonator and fluid dielectric with individual and continuous frequency tuning is reported for the first time. Finally, the reconfigurable tri-band filter is fabricated and measured to validate the concept. [ABSTRACT FROM AUTHOR]

A high roll-off, third-order frequency selective surface (FSS) with quasi-elliptic bandpass response is presented. It is based on substrate integrated waveguide technology. Its unit cell includes three cavities that support at the TE101 mode. Interactions of resonators are dominated by magnetic couplings. The coupling matrix is analyzed and used to design FSS. Guidelines for a coupling-matrix-based FSS design are given. Transmission zeros realized close to the lower and upper narrow passband lead to high roll-off characteristics. In addition, a cross-polarization feature is easily achieved. Finally, a prototype is designed and fabricated to validate the proposed structure. A stable frequency response in passband has been obtained with an oblique incidence of 40° for TE polarization. Good agreement between the simulated and measured results verifies the design concept of bandpass FSS. [ABSTRACT FROM AUTHOR]

In this paper, a series of designs for cavity balanced and unbalanced diplexer are proposed. The balanced and unbalanced designs can be categorized into four groups—unbalanced-to-unbalanced, unbalanced-to-balanced, balanced-to-unbalanced (B2U), and balanced-to-balanced. First, two approaches to achieve out-of-phase characteristics of three fundamental modes, namely TE011, TE101, and TM110 in a single triple-mode resonator, are proposed for balun filter designs. Second, four types of unbalanced and balanced diplexers are presented by adopting these three fundamental modes, of which the Butterworth response applies with specific external quality and coupling coefficient. To the authors’ best knowledge, full-metal cavity balun diplexer and balanced diplexer are not reported in the open literature. For proof of concept, the design of a B2U diplexer is fabricated and measured. Good matching between simulated and measured results shows the accuracy of the proposed design and methodology, which would be attractive in the high-power radio frequency (RF) front-end systems. [ABSTRACT FROM AUTHOR]

In this paper, the design of a cavity crossover with three intersecting channels is presented. The three fundamental modes of a cavity resonator, namely, TE011, TE101, and TM110 modes, are adopted to resonate at each of three channels, respectively. Due to the modal orthogonality of these fundamental modes, high isolation among three channels can be achieved. Two kinds of crossovers, for narrowband and broadband applications, are presented. For the narrowband case, the proposed crossover resonates at 2.91 GHz with the fractional bandwidth of 1.4%. For the broadband case, the proposed crossover resonates at 3 GHz with the fractional bandwidth of 24%. The isolations of both designs reach more than 50 dB. For a proof of concept, the broadband example of the cavity crossover structures is fabricated and measured. A good agreement between the simulated and the measured results verifies the accuracy of the proposed design methodology. [ABSTRACT FROM AUTHOR]

A class of bandwidth-enhanced full-metal cavity-backed slot filtenna is proposed in this communication. The design is constructed by three resonators. They are two resonance windows and one resonance cavity. As a consequence of that, three resonance modes are achieved using a single cavity. By using this resonance window, the 10 dB frequency bandwidth of the proposed cavity antenna has wide fractional bandwidth (FBW) of 20%. To the authors’ best knowledge, the proposed filtenna achieves the widest FBW among those published full-metal cavity-backed slot filtennas. Moreover, a fifth-order filtenna is also designed to further broaden the 10 dB FBW to 24%. Finally, an antenna prototype was fabricated and tested for experimental verification of the proposed design methodology. Good agreement between the measurement and simulation shows the feasibility of the proposed wideband full-metal filtenna using a resonance window approach. [ABSTRACT FROM AUTHOR]

A novel concept and approach for integration of a three-state diplexer (TSD) by utilizing the triple-mode cavity resonators is proposed in this paper. The proposed TSD has the inherent nature of three frequency channels, two of which can be utilized for duplexing channels by exciting one port as the input in each state. Meanwhile, three fundamental modes, namely, TE011, TE101, and TM110, are excited in the triple-mode resonators (TMRs) to control these three frequency channels. Without utilizing any junction networks for impedance matching, the required values of the external quality factors and coupling coefficients can be extracted to meet the relevant Chebyshev responses in the three bands of the TSD, simultaneously. Owing to the modal orthogonality among the three fundamental modes, high isolation among these three frequency channels can be effectively achieved. For proof of concept, two design examples of the TSD structures are presented with different topologies. For both examples, four and six TMRs are adopted, respectively, where the predicted three frequency channels of the TSD can be successfully excited with excellent channel isolations. The fabricated prototype shows good agreement between the simulated and measured results verifying the feasibility of the proposed design methodology. [ABSTRACT FROM AUTHOR]

A highly integrated three-state diplexer (TSD) on a single planar elliptical structure is for the first time presented in this paper. Three resonant modes are investigated in a planar elliptical resonator, e.g., two TM11 degenerate modes and one TM21 mode. These three resonant modes are designed to form three filtering channels, which are further combined to generate three states of a diplexer, namely, TSD. The planar elliptical triple-mode resonator is fed by three microstrip lines to form a triple-mode TSD. In order to validate the concept, the designed planar TSD is fabricated and measured. The measured results are in good agreement with the simulated ones. [ABSTRACT FROM AUTHOR]

A novel concept for the two-in-one design with the integration of filters and antennas, using a single cavity, is presented in this communication. Basically, a triple-mode resonator (TMR) is utilized as a common feeder to achieve filtering and radiating functions at three different frequency bands. Each of the three bands adopts one of the three fundamental modes, namely, TE011, TE101, and TM110, in a single TMR to realize the relevant functions. Owing to the modal orthogonality of these fundamental modes, high isolation can be effectively realized among these three channels. Based on the proposed TMR, three different prototypes are designed for different applications. For the first prototype, the structure of a dual-band filter plus an antenna is presented using a second-order TMR. Based on the combination of a duplexer plus an antenna, the second prototype is attained. To further explore the function of the proposed TMR, the structure of a filter plus a dual-polarization antenna is depicted as the third prototype. For verification, the third prototype is fabricated and tested. Good agreement between the simulated and the measured results is achieved, which proves the feasibility of the proposed design methodology. [ABSTRACT FROM PUBLISHER]

A novel approach for design of a miniaturized cavity triplexer is proposed in this paper by using triple-mode resonator (TMR) as a common feeder of three frequency channels in a triplexer. Three frequency channels are generated by three fundamental modes of a single rectangular triple-mode cavity resonator. Without installing any connection-oriented junction network, i.e., T-junction or star junction, only coupling slots are adopted herein to achieve required coupling coefficients and external quality factors toward the specified Chebyshev responses in the three passbands simultaneously. High isolation among these three separated bands can be effectively achieved owing to the modal orthogonality via sharing a common TMR structure as a feeder. Two triplexers are then designed and fabricated using varied topologies. The hybrid resonator triplexer method is presented as the first approach by using a TMR as a feeder to feed three sets of single-mode cavity bandpass filters. As the second approach, the triple-mode triplexer (TMT) method is developed by cascading a few TMRs to form a multistage higher order TMT. Finally, two fabricated triplexer prototypes are tested for experimental verification of the proposed design methodology. Good agreement between measurement and simulation is achieved. [ABSTRACT FROM PUBLISHER]

A novel broadband dual-polarized slot antenna with stable radiation pattern is presented. Two U-shape microstrip lines are introduced at two feeding ports to excite a cross-shape slot for realizing dual-polarized antenna. The simulated results are given to explain how the ground plane, short metallic pillars, and reflector affect the reflection coefficient, \vert S11\vert . The beamwidth of the proposed antenna is stable within the operating band, whereas a broad fractional bandwidth ( \vert S11 \vert < - 10 dB) up to 68% is achieved, covering a frequency range of 1.3–2.65 GHz. The measured half-power beamwidth of H -plane is 66.8° ± 3.4°. [ABSTRACT FROM PUBLISHER]

This paper proposes a novel diplexer based on triple-mode dielectric-loaded cylindrical cavities. Such two metal cavities are designed to achieve two different frequency bands, while three resonant modes of a single cavity are classified as a TM mode and a pair of hybrid (HE) degeneration modes. An off-centered dielectric resonator instead of a traditional corner cuts perturbation or screws perturbation properly perturbs the two degenerate modes in the same cavity. Extensive study is then conducted to design this proposed diplexer. Finally, a diplexer prototype is fabricated using a brass cavity and it is tested for experimental verification of the predicted results. Good agreement between measurement and simulation is achieved. [ABSTRACT FROM PUBLISHER]

This paper proposes a novel class of wideband metal cavity multiple-mode bandpass filters (BPFs), consisting of a triple-mode filter and a quadruple-mode filter. Two TE11 degeneration modes in a single metal cavity are excited by using an off-centered approach instead of a traditional corner-cut approach. They work together with the TM10 mode to constitute a three-pole wide passband with a fractional bandwidth of 30% at the central frequency of 3.2 GHz. Moreover, an off-centered metal cylinder can properly excite an extra TM11 mode in the passband. As such, this TM11 mode, TM10 mode, and a pair of degeneration TE11 modes can be simultaneously utilized to form a quadruple-mode BPF. Compared with the triple-mode BPF, the quadruple-mode BPF has better performance in term of the steepness of rejection skirt. The fractional bandwidth of this BPF can achieve up to 31%. In final, the two proposed BPFs are fabricated by using the silver plated aluminum technology. Measured S-parameter frequency response and group delay have satisfactorily matched with the simulated results. [ABSTRACT FROM PUBLISHER]

A triple‐mode narrow‐band bandpass filter is presented by exploiting three fundamental resonant modes, TE101, TE011 and TM110 modes, in a single air‐filled rectangular cavity. Compared with the conventional multimode cavity filter, the proposed filter is to simultaneously excite these three resonant modes without installing any cuts or screws inside the cavity, so as to keep the integrity of the cavity and decrease the fabrication cost. In particular, an inclined U‐shaped slot is utilised at each of the microstrip feed line to properly excite these three modes such that not only three poles are achieved within the desired passband but also a pair of transmission zeros are generated in the lower and upper stop‐bands. A single metal rectangular filter is finally fabricated and tested. The measured results have well validated the simulated results. [ABSTRACT FROM AUTHOR]

This paper presents, for the first time, the design and implementation of a planar tunable crossover. This crossover is derived from the conventional two-section branch-line crossover by substituting its three vertical transmission lines with the two fixed capacitors and one tunable capacitor to realize the tunable passband. By designing its horizontal transmission lines as coupled lines and replacing its vertical transmission lines by three capacitors, the circuit size is greatly reduced. Closed-form equations for design parameters are derived to simplify design procedure of the proposed crossover. For verification, a crossover with tunable frequency of 1.2–2.4 GHz is designed based on the given design closed-form equations. Finally, a microstrip tunable crossover with one varactor diode 1sv277 is fabricated and measured. The measured results are in good agreement with the simulated ones. The results show that the passband can be tuned in a frequency range from 1.29 to 2.06 GHz, yielding 46% tuning range with better than 20-dB return loss and isolation, while the insertion loss varies from 0.59 to 1.22 dB. The crossover occupies a small size of 0.25\ \lambda g \times 0.04\ \lambda g, which is only 8% of the area of conventional two-section branch-line crossover. [ABSTRACT FROM AUTHOR]

A class of UWB filter-antenna is proposed. The proposed filter-antenna is compact, high inband selectivity and insensitive to ground plane size. A via-fed monopole antenna is proposed with tapered shape between the radiator and ground plane. This tapered shape supports two resonant modes to provide wideband matching. Four shorting pins are added to this antenna to improve the selectivity of the filter-antenna performance. Furthermore, a shunt LC-resonator is used to generate the notched-band in the UWB band without extra circuit size. To verify the predicted results, two prototype filter-antennas with and without notched-band are fabricated and measured on a low-cost two-side printed circuit board. The measured results exhibit a good selectivity, the measured return loss is below -12.5 dB within the desired passband and the size is compact with overall dimension of 28.5\times 28\times 0.8\ mm^3. [ABSTRACT FROM PUBLISHER]

A new method for frequency selective surface (FSS) with high selectivity, namely, filtenna–filtenna (FA-FA)-based technique, is proposed, which consists of two filtering antennas and impedance matching network. Based on the reciprocity theorem, the radiation null of filtenna can provide a stopband of the proposed FSS. In this work, it is validated by using a periodic array of back-to-back magnetoelectronic (ME)-dipole antennas with split-ring resonators (SRRs), and a slotted GND plane is used to connect the two ME-dipole antennas for impedance matching. Bandpass response of the proposed FSS is realized by the intrinsic high-pass characteristic of ME-dipole antennas and the bandstop characteristic of SRRs. Four transmission zeros (TZs) and three transmission poles (TPs) are generated, exhibiting a high-order filtering response. TZs and TPs are analyzed by equivalent circuit model and current distributions. The 3 dB fractional bandwidth (${\mathrm {FBW}}_{\mathrm {3\,dB}}$) of 38.5% in the passband and the 20 dB fractional bandwidths $({\mathrm {FBW}}_{\mathrm {20\,dB}})$ of 8.7% in the lower rejection band and 13.8% in upper rejection band are obtained in this design. Finally, a prototype is fabricated and measured to further validate the proposed FA-FA-based technique. Simulated and measured results show that the proposed FA-FA-based FSS is with the distinct advantages, including wide passband, low profile, tunable TZs, and dual-polarized application, which verifies the proposed method of FSSs. [ABSTRACT FROM AUTHOR]

A coplanar waveguide fed wideband dipole antenna using a multiple‐mode resonator is proposed and developed. A simple dipole antenna structure is investigated for its wideband radiation performance by virtue of its single, double, triple and quadruplet resonant modes. Later, a metallic reflector is properly installed in order to provide a unidirectional radiation pattern as demanded for the long‐term evolution (LTE) application. In the design, a quadruplet‐mode wideband dipole antenna is explored to cover the LTE operation band with a 10 dB fractional bandwidth of 46.8%. Finally, an antenna prototype is fabricated and tested to experimentally verify the expected wideband property and predicted results. [ABSTRACT FROM AUTHOR]

This paper presents a novel polarization-insensitive dual-band frequency-selective surface (FSS)-based electromagnetic shield. The miniaturized FSS unit cell consists of a modified Jerusalem crossed loop and a corner-modified square loop. These FSS elements are arranged in a co-planner configuration over a single-layer Rogers 5880 substrate and simultaneously offer effective shielding in the X- and Ku-bands. Moreover, the FSS manifests polarization-independent and angularly stable band-reject filter characteristics over various oblique angles of incidence for both the TE and TM polarizations with virtuous attenuation at both resonances. In addition, the FSS structure is modelled into an equivalent lumped circuit to better analyze the phenomenon of EM wave suppression. A finite prototype of FSS is fabricated and tested. The simulated and measured results are in good agreement, thus making it a potential candidate for RF shielding/isolation applications. [ABSTRACT FROM AUTHOR]

Novel design concept of reconfigurable full-metal cavity-backed slot antennas (CBSAs) using movable metal posts is proposed in this article. It is found that the cavity mode with purely directional electric field is only affected by the metal post to be placed in parallel to its electric field. Thus, two orthogonal cavity modes TE101 and TE011 can be perturbed by two respective metal posts so as to independently tune the resonant frequencies of these two modes. Electromagnetic energy of the cavity modes can be radiated out through the slots on the top wall of the cavity. In this context, reconfigurable slot antennas with different functionalities, such as single-band, dual-band, dual-mode wideband, the tunable frequency with constant bandwidth, and tunable bandwidth with constant frequency, are thus constituted to demonstrate its attractive design feasibility. The frequency-reconfigurable cavity-back slot antenna with movable metal posts is proposed for the first time. The utilization of the metal posts allows us to achieve a continuous frequency tuning property, while the full-metal structure of the proposed antenna holds a high power-handling capacity and a high radiation efficiency. In final, a prototype of the dual-mode wideband slot antenna is designed, fabricated, and tested to reveal its total efficiency higher than 88% and stable radiation pattern over the tuning band. Good agreement between the measured and the simulated results well validates the presented design concept. [ABSTRACT FROM AUTHOR]

In this communication, an $S$ -band wide-bandwidth and wide-beamwidth full-metal circularly polarized (CP) cavity-backed slot antenna is proposed. A pair of triangular prisms placed at the corners of the cavity is introduced to produce TE101 and TE011 modes with orthogonal electric fields. These two modes are used to achieve the CP radiation and radiate the energy through a single-circular slot. By simultaneously varying the prisms’ size and slot radius, the axial ratio (AR) bandwidth (ARBW) improves. The ARBW is further improved by replacing the circular slot with an elliptical slot. As a result, the ARBW increases from 1.0% to 10.3% without complicating the antenna structure and without enlarging the antenna size. Besides, the antenna still operates at two degenerate modes to introduce stable radiation gain and pattern. In addition, the proposed CP slot antenna features a wide ARBW. The final measurement shows that the proposed CP antenna can achieve a 9.5% bandwidth, a stable gain of 7.65 dBic ± 0.15 dBic, and higher than 140° ARBWs in a wide frequency range. The peak total radiation efficiency and aperture efficiency are about 97% and 91%, respectively. [ABSTRACT FROM AUTHOR]

A quintuple‐mode wideband filter based on a single cavity is proposed. A pair of shorting pins is inserted into the cuboid cavity along the symmetry plane. The cavity filter is fed by a pair of coaxial cables and the inner conductor is inserted into the cavity with a circular disc at the end of the probe. The pair of inserted probes and the pair of shorting pins excite five resonant modes in the cavity. The proposed filter has the central frequency at 5.8 GHz with a bandwidth of 70%. Meanwhile the wideband filter has transmission zeros at the lower and upper‐stopbands to improve the selectivity and out‐of‐band performance. The measured insertion loss is <0.65 dB, and all measured results have a reasonably good agreement with the simulated results. [ABSTRACT FROM AUTHOR]

This article proposes a new class of miniaturized full‐metal bandpass filters (BPFs) and multiplexers using circular spiral resonators (CSRs). The proposed metal CSR is supported on the metal cavity's wall, which serves as a short‐end resonator. This CSR has obvious size reduction compared to traditional cavity resonators and owns low insertion loss, high power capacity and high selectivity. Then, three BPFs using two, three and four CSRs are designed and analysed. All the proposed filters have transmission zeroes (TZs) produced by the source‐load coupling without introducing additional coupling structure. The proposed CSR is further used to design diplexer and quadruplexer. All the proposed filters have ultra‐compact size, especially, the size of quadruplexer is only 0.23λ0 × 0.081λ0 × 0.067λ0. Finally, the fourth‐order filter and quadruplexer are fabricated and measured, the good agreement between the measured results and the simulated results validates the proposed design concepts. [ABSTRACT FROM AUTHOR]

In this article, low-sidelobe cavity-backed slot antenna array with simplified feeding structure for vehicular communication is proposed. Conventional low-sidelobe antennas were realized using power dividing network to obtain the in-phase and nonuniform-amplitude excitation, which causes complicated antenna's structure and design. To tackle these challenges, a simplified feeding method without using power dividing network is introduced to design the low-sidelobe slot antenna array. The slots at the top walls serve as the radiation elements, and the slots are directly fed by the electric field of the cavity mode. Nonuniform amplitude is obtained by simply modifying the slots’ sizes and positions, while the in-phase excitation of the elements is remained. The nonuse of power dividers brings out a simpler antenna structure than conventional full-metal waveguide-based antennas. Besides, the full-metal structure introduces a high power-handling capacity. Then, two linear arrays with 1 × 4, 1 × 7 elements and a planar array with 5×4 elements are presented to show the design feasibility. Finally, the 5 × 4 antenna array is fabricated and measured, which can achieve 18.2 dBi gain, −20 dB sidelobe level, 94% radiation efficiency, and -42 dB cross-polarization. Good agreement between measurement and simulation verifies the feasibility of the proposed design concept. [ABSTRACT FROM AUTHOR]

In this article, a class of waveguide bandpass filters (BPFs) is modularly synthesized on dual-mode resonators, which are implemented by the TE102 and TE201 modes in a rectangular cavity. Different from the conventional BPFs, these dual-mode resonators are arrayed in a stacked manner, presenting a transversal topology of BPFs. Therefore, each dual-mode resonator contributes a doublet, and these doublets could be independently realized without nonresonating nodes, due to the modularity property of transversal BPFs. The overall sizes of these transversal BPFs are just half or a fourth of the reported counterparts at the expense of the cavities $Q$ -factor which is reduced 44% or more depending on how many cavities are stacked. These BPFs, including single- and dual-passband filters, are then synthesized, fabricated, and measured. The measured results support the proposed approach. [ABSTRACT FROM AUTHOR]

A wideband high-efficiency millimeter-wave (mm-wave) circularly polarized (CP) array which is constituted by novel planar substrate integrated waveguide (SIW)-fed S-dipoles is presented in this communication. The proposed mm-wave CP S-dipole consists of two rotational symmetric curved arms and is fed differentially through aperture coupling, which features simple configuration and excellent performance. Detailed analysis is given to explain the operating principles of this element. It is noted that superior element performance including a wide impedance bandwidth of 43%, a wide 3 dB axial ratio (AR) bandwidth of 36%, and 1 dB gain bandwidth of 38% is achieved by the planar SIW-fed S-dipole. By feeding 64 in-phase S-dipole elements through a full-corporate SIW feeding network, a planar wideband highly efficient mm-wave $8 \times 8$ CP array is realized. To verify the design concept, a prototype operating at Ka-band is fabricated and measured. The measurement results indicate that the proposed array achieves a wide overlapped bandwidth of 27.6%, a high antenna gain of 25.2 dBic, and a high aperture efficiency of 89.9%. Attributed to the planar and robust array structure as well as its excellent performance, the presented array is a good candidate for various mm-wave applications. [ABSTRACT FROM AUTHOR]

In this article, a cavity filtering magic-T based on three fundamental modes, namely, TE011, TE101, and TM110, in a single triple-mode resonator (TMR) is presented. Taking advantage of the magic-T concept, two types of cavity-based filtering power dividers (PDs) integrated with balanced and duplexing functions are investigated. For the first design of a balanced-to-unbalanced (B2U) PD, balanced functions are integrated at input ports. Three fundamental modes provide the odd- and even-symmetric field distributions so that in-phase and out-of-phase responses at output ports can be achieved. Meanwhile, the common-mode suppression can be achieved at the balanced ports, and high isolation is achieved at the single-end ports, respectively. For the second design of a duplexing PD, instead of using resistors for output ports isolation, isolated ports are applied for magic-Ts to achieve all ports impedance matched and high isolation between channels of the proposed duplexing PD. To verify the concept, a B2U PD and a duplexing PD are fabricated and tested. Good matching between simulated and measured results shows the accuracy of the proposed design methodologies. [ABSTRACT FROM AUTHOR]

In this paper, a new transversal configuration is presented for waveguide bandpass filters (BPFs) on stacked rectangular $ H$ -plane waveguide cavities. Different from the conventional ladder BPFs, cavities constituting the proposed transversal BPFs are arrayed in a stacked manner. Odd- and even-mode resonators of transversal BPF are realized by TE101 and TE102 modes of rectangular $ H$ -plane waveguides, respectively. Using the configuration proposed herein, the realization of an $N$ th-order filter could be decomposed into realizations of $N$ first-order subfilters, and each subfilter could be realized independently, which is guaranteed by the unique array of resonators of transversal filters. Therefore, the complexity of realizing BPFs could be reduced, especially for filters with multiple transmission zeros (TZs). A class of transversal filters, including BPFs and dual-band filter, are synthesized, fabricated, and measured to verify the approach. [ABSTRACT FROM AUTHOR]

This paper presents the proposal and design of multistate diplexer on uniform- and stepped stub-loaded resonators, that is, a three-state diplexer (TSD) and a four-state diplexer (FSD). The two proposed diplexers have an attractive application in a frequency-hopping system with miniaturization in their overall size. Next, three and four sets of second-order bandpass filters are applied to form the three and four filtering channels, respectively. These filtering channels are then used to comprise these multiple-state diplexers. In this way, compact size and high-frequency selectivity have been well achieved. For the purpose of demonstration, the prototypes of TSD and FSD are fabricated and measured. The measured results are found in good agreement with the simulated results. [ABSTRACT FROM AUTHOR]

This communication presents the design of 1 bit coding engineered reflector for wideband monostatic/bistatic radar cross section (RCS) reduction under a wide angle of incidence by redirecting the backscattered electromagnetic (EM) energies into wide and countless angles. The proposed surface can achieve an excellent monostatic/bistatic RCS reduction performance of more than 10 dB over a wide frequency range from 60 to 120 GHz under wide angles of incidence up to 75°. This is achieved by designing a wideband anisotropic polarization rotator unit cell with a relative polarization conversion bandwidth of 66.7% and polarization conversion efficiency of more than 99%. The unit cell and its mirrored version are used to represent the “0” and “1” coding states of an optimized 1 bit coding sequence. The distribution of the “0” and “1” coding states and the dimensions of the anisotropic unit cell are optimized carefully, such that the unit cell will have 180° ± 30° reflection phase difference between the $x$ - and $y$ -axes over the whole three frequency bands (V-, E-, and W-bands) and obtains ultrawideband and wide-angle diffusion scattering patterns under oblique incidence up to 75°. The simulation and experimental results show that the proposed coding engineered reflector has nearly uniform diffusive scattering characteristics under normal and wide-angle off-normal incidences of EM waves up to 75° over the three frequency bands. [ABSTRACT FROM AUTHOR]

The independent control of two orthogonal polarizations that possess dual functionalities is highly desirable in antenna and wireless communication technologies. Spin-decoupled metasurfaces with integrated dynamic and geometric phases have been proposed to generate two independent right-handed and left-handed circularly polarized (RCP and LCP, respectively) waves. However, the RCP and LCP phases are correlated by a linear equation of the dynamic and geometric phases. In this article, we propose a meta-atom in which the 1 b phase of two orthogonal polarizations can be controlled independently. Moreover, a high-gain broadband millimeter-wave multidimensional metasurface to generate an $x$ -polarized $l=0$ beam with a 10° beam deflection and a $y$ -polarized $l=+1$ beam independently is simulated, fabricated, and tested. The proposed metasurface operating over the frequency range of 16–28 GHz has the maximum gains of 28.7 and 23.8 dBi for the $l=0\,\,x$ -polarized waves and $l=+1\,\,y$ -polarized waves, respectively. Compared with spin-decoupled metasurfaces, the proposed metasurface provides a simpler design process to generate two independent vortex beams for the two orthogonal polarizations. The proposed vortex metasurface also has the advantages of dual polarization, high gain, wide relative bandwidth, and is broadband. The proposed metasurface has potential application in high-capacity communication systems. [ABSTRACT FROM AUTHOR]

A substrate integrated waveguide (SIW) H-plane horn antenna loaded with tapered multistrip transition and dielectric slab is proposed for broadband high-gain operation. The broadband characteristic of the proposed antenna is obtained by loading a tapered multistrip transition. The theory of coupled resonator is introduced to reveal the mechanism of bandwidth enhancement. On the other hand, a dielectric slab is used to enhance the gain of the proposed antenna. The optimal length of this dielectric slab is determined based on the design principles of a dielectric rod with maximum gain. Besides, the tapered multistrip transition also contributes to the gain improvement by suppressing the feed radiation and prompting the transverse expansion of the surface wave. To verify the design theory and concept, a prototype operating at the K- and Ka-bands is fabricated and measured. The measurement results show that the impedance bandwidth of the proposed antenna is from 20.6 to 38.4 GHz (60%). Within the operating band, a peak realized gain of 19.1 dBi and excellent endfire radiation patterns with low cross polarization (<−30 dB) and high front-to-back ratio (FBR >20 dB) are achieved simultaneously. With its broad bandwidth, high gain, low cross polarization, and high FBR, the proposed antenna is promising for various millimeter-wave applications. [ABSTRACT FROM AUTHOR]

A novel ultra-wideband (UWB) reflectarray antenna for the Internet of Vehicles (IoV) is introduced in this paper. By simply connecting the neighboring reflectarray elements, the proposed reflectarray antenna achieves a remarkable radiation pattern bandwidth of 20 GHz, ranging from 10 GHz to 30 GHz. To explain the operating principles of the proposed reflectarray antenna, the equivalent circuit (EQC) model of the unit cell is built, which also provides an efficient and rapid way to analyze the performance of the proposed reflectarray element. It is found from the EQC analysis that the connected elements can achieve better reflection phase responses than conventional separated elements, thereby improving the array bandwidth. As a proof of concept, a 503-element reflectarray antenna simultaneously covering the vehicle-to-satellite bands (12.25–12.75 GHz/14.0–14.5 GHz/19.6–21.2 GHz/29.4–31.0 GHz), the 24-GHz short-range vehicle radar band (24.25–26.65 GHz) and the 5G millimeter-wave band (27.5–28.35 GHz) is designed, fabricated, and characterized. The experimental results demonstrate that the presented reflectarray antenna can maintain undistorted beams, high antenna gain, low cross-pol level, and moderate aperture efficiency over a bandwidth of 100%, i.e., from 10 to 30 GHz. With its simple and planar aperture as well as excellent performance, the proposed reflectarray antenna can be a promising candidate for vehicles that require reliable high data-rate satellite links and 5G millimeter-wave connections simultaneously. [ABSTRACT FROM AUTHOR]

High-isolation in-band full-duplex (IBFD) cavity-backed slot antennas (CBSAs) in a single resonant cavity are presented in this article. The TE101 and TE011 cavity modes combined with a modified orthogonal feeding structure are first used to design the duplex antenna. The proposed feeding structure can reduce the port-to-port coupling strength and produce a very high isolation. By replacing the crossed radiation slots with two pairs of parallel radiation slots, enhanced radiation gain is achieved. To tackle the narrow bandwidth for the single-mode operation, two orthogonal resonant-iris modes produced by the two feeding slots are introduced to design a dual-mode wideband IBFD antenna. The simulated bandwidth is increased from 0.8% to 5.7%. All the presented antennas with improved performances are designed and realized in a single full-metal resonant cavity. Compared with the conventional design method, high isolation, enhanced gain, and enhanced bandwidth are simultaneously achieved without enlarging the antenna size. Finally, the prototype of the wideband IBFD slot antenna is measured and presented to validate the design concept, which has a 5.8% bandwidth, higher than 95% total efficiency, especially an isolation higher than 72 dB. [ABSTRACT FROM AUTHOR]

A dual-band planar crossover with simple structure is proposed. This crossover is derived from the conventional single-band two-section branch-line crossover by doubly extending the length of its vertical transmission lines, which realizes the dual-band operation. Closed-form equations for design parameters are derived, which simplifies design procedure of the proposed crossover and shows that the available bandwidth of the passband increases with the increasing frequency ratio. By adding one short-circuited stub and one open-circuited stub to the originally proposed dual-band crossover, two types of modified dual-band crossovers and their closed-form design equations are proposed for smaller and larger frequency ratios applications. For verification, four different dual-band crossovers are designed and simulated, of which two microstrip crossovers operating at 1/1.8 and 1/2.3 GHz are fabricated and measured. The measured results are in good agreement with the simulated ones. [ABSTRACT FROM PUBLISHER]

A balanced dual‐band bandpass filter (BPF) with enhanced common‐mode (CM) suppression is proposed. The dual‐band differential‐mode (DM) bandpass response is obtained using a double‐layer substrate. The stub‐loaded stepped‐impedance resonators are used both in the top and the bottom layers to constitute a dual‐band BPF with two controllable passbands. The slotline portion in the middle layer is excited under DM operation. Moreover, the even‐symmetrical field along the slotline is highly attenuated under CM excitation, thus achieving excellent CM suppression over the desired DM passbands. To verify the proposed concept, a balanced dual‐band BPF, operating at 1.9 and 2.8 GHz, is designed and fabricated, and the simulated and measured results are in good agreement. [ABSTRACT FROM AUTHOR]

An ultrawideband stacked single-turn spiral antenna with an integrated feeding structure is presented in this communication. The proposed antenna consists of two stacked planar single-turn Archimedean spirals which are wound in orthogonal directions. By connecting these two stacked spirals through two vertical posts, the traveling-wave current path is lengthened and, hence, the operating frequency of Mode 1 is decreased. To reduce the feeding complexity, an integrated tapered microstrip line is used to feed the spiral, which also acts an impedance transformer. It is demonstrated that the proposed antenna can operate across 0.29–5 GHz with |S11| < −10 dB and 0.75–3.64 GHz with axial ratio (AR) < 3 dB. Compared with the single-turn Archimedean spiral with the same radius, the impedance and AR bandwidth of the proposed antenna are enhanced from 5:1 to 17:1 and from 1.6:1 to 4.9:1, respectively, showing that the proposed antenna can be a good candidate for ultrawideband applications. [ABSTRACT FROM AUTHOR]

Based on characteristic mode theory (CMT), a quad-polarization reconfigurable antenna with suppressed cross polarization is proposed in this article. The proposed antenna is composed of the radiator, excitation units, and feeding network. A square conductive slab (SCS) is used as the main radiator, which is designed elaborately by characteristic mode analysis (CMA). Different modes of the radiator are stimulated selectively by four groups of balanced inductive exciters (BIEs) to realize horizontal polarization (HP), vertical polarization (VP), left-hand circular polarization (LHCP), and right-hand circular polarization (RHCP). Two p-i-n diodes are embedded into the feeding network to switch the excitation states of the four groups of BIEs, thereby achieving quad-polarization reconfiguration. More importantly, a novel method exploiting the CMA is adopted for achieving low cross polarization. By means of introducing the orthogonal mode, the cross-polarization component of the fundamental mode can be canceled out by the co-polarization component of the orthogonal mode, which greatly reduces the cross polarization from −10 to −40 dB in the two principal planes. The measurement results demonstrate that the quad-polarization agility and a cross-polarization level around −30 dB under all polarization states are achieved simultaneously, verifying the functionality and reliability of the proposed method. [ABSTRACT FROM AUTHOR]

A compact substrate integrated waveguide (SIW) cavity slot antenna with enhanced bandwidth and quasi‐elliptic filtering response is proposed. Served as radiating elements, two slots are etched on the top plane of a square SIW cavity. Quality factors of two original modes are greatly reduced and a new resonant mode is introduced by etching an additional slot on the bottom plane. By merging these three modes within a single passband, the bandwidth can be enhanced. In addition, a radiation null is generated in the lower and upper stopband, respectively. Therefore, a quasi‐elliptic filtering response is achieved with three resonant modes in the passband and two radiation nulls in the stopband. A fabricated prototype with the size of 0.48λ0 × 0.48λ0 × 0.02λ0 has been measured. The measured 10 dB bandwidth is 11.5% (3.28–3.68 GHz). The measured efficiency is about 77% in the passband but it sharply drops to 5.6% at 3.26 GHz and 10.5% at 3.76 GHz. [ABSTRACT FROM AUTHOR]

Filtering baluns are proposed based on the hybrid cavity-microstrip structures in this article. The cavity acts as the resonator to obtain the filtering response. In the meanwhile, the microstrip feeding networks are used to excite multiple modes and achieve the balun characteristics simultaneously. The coupling mechanism between the slots and the cavities is utilized to analyze the single- and dual-band filtering baluns. Therefore, by combining the benefits of the cavities and the microstrip lines, multifunctional filtering baluns are realized. Besides, to reduce the volume and insertion loss further, a filtering balun based on the dielectric cavity-microstrip structure is presented and designed. It possesses high selectivity passband response, magnitude imbalance of 0.075 dB, and phase difference of 180° ± 0.2°. It is much smaller than that fed by the waveguide. On the other hand, it is easy to integrate with other components and robust in structure compared to that fed by the probe. Thus, the proposed hybrid structure not only maintains the high performance of the cavity but also has the flexibility of the planar circuit. [ABSTRACT FROM AUTHOR]

In this paper, a novel on-chip circuit design approach is proposed using hybrid coupling technique. Taking advantage of this technique, a microwave bandpass filter (BPF) is proposed as a design example for proof of concept. Based on stub-loaded stepped-impedance transmission lines and folded stepped-impedance meander line from different metal layers, the proposed BPF can generate three transmission zeros (TZs) and two transmission poles (TPs), which are excited through the hybrid mutual couplings between the inductive and capacitive metals. To understand the principle of this configuration, an equivalent LC-circuit model is presented and simplified, of which the TZs and TPs of the proposed BPF are estimated by the extracted transfer function. The calculated results exhibit good agreements with the simulated and measured ones. In addition, the bandwidth and center frequency of the proposed BPF can be tuned flexibly. Finally, to further demonstrate the feasibility of this approach in practice, the structure is implemented and fabricated in a commercial 0.13- $\mu \text{m}$ SiGe (Bi)-CMOS technology. The measurement results show that the proposed BPF, whose chip size is 0.39 mm $\times0.45$ mm (excluding the test pads), can realize a wide bandwidth from 19.7 to 33.2 GHz with a return loss of 15.8 dB and insertion loss of 3.8 dB at the center frequency of 26.5 GHz. [ABSTRACT FROM AUTHOR]

A response from the authors of the article "Compact broadband Gysel power divider with arbitrary power-dividing ratio using microstrip/slotline phase inverter" in the May 2012 issue is presented.