Search

Abstract High-intensity, short-pulse lasers are crucial for generating energetic electrons that produce high-energy-density (HED) states in matter, offering potential applications in igniting dense fusion fuels for fast ignition laser fusion. High-density targets heated by these electrons exhibit spatially non-uniform and highly transient conditions, which have been challenging to characterize due to limitations in diagnostics that provide simultaneous high spatial and temporal resolution. Here, we employ an X-ray Free Electron Laser (XFEL) to achieve spatiotemporally resolved measurements at sub-micron and femtosecond scales on a solid-density copper foil heated by laser-driven fast electrons. Our X-ray transmission imaging reveals the formation of a solid-density hot plasma localized to the laser spot size, surrounded by Fermi degenerate, warm dense matter within a picosecond, and the energy relaxation occurring within the hot plasma over tens of picoseconds. These results validate 2D particle-in-cell simulations incorporating atomic processes and provide insights into the energy transfer mechanisms beyond current simulation capabilities. This work significantly advances our understanding of rapid fast electron heating and energy relaxation in solid-density matter, serving as a key stepping stone towards efficient high-density plasma heating and furthering the fields of HED science and inertial fusion energy research using intense, short-pulse lasers.

This article reports the first measurements of high-energy photons produced with the high-intensity PETawatt Aquitaine Laser (PETAL) laser. The experiments were performed during the commissioning of the laser. The laser had an energy of about 400 J, an intensity of 8 × 1018 W·cm−2, and a pulse duration of 660 fs (FWHM). It was shot at a 2 mm-thick solid tungsten target. The high-energy photons were produced mainly from the bremsstrahlung process for relativistic electrons accelerated inside a plasma generated on the front side of the target. This paper reports measurements of electrons, protons and photons. Hot electrons up to ≈35 MeV with a few-MeV temperature were recorded by a spectrometer, called SESAME (Spectre ÉlectronS Angulaire Moyenne Énergie). K- and L-shells were clearly detected by a photon spectrometer called SPECTIX (Spectromètre Petal à Cristal en TransmIssion pour le rayonnnement X). High-energy photons were diagnosed by CRACC-X (Cassette de RAdiographie Centre Chambre-rayonnement X), a bremsstrahlung cannon. Bremsstrahlung cannon analysis is strongly dependent on the hypothesis adopted for the spectral shape. Different shapes can exhibit similar reproductions of the experimental data. To eliminate dependence on the shape hypothesis and to facilitate analysis of the data, simulations of the interaction were performed. To model the mechanisms involved, a simulation chain including hydrodynamic, particle-in-cell, and Monte Carlo simulations was used. The simulations model the preplasma generated at the front of the target by the PETAL laser prepulse, the acceleration of electrons inside the plasma, the generation of MeV-range photons from these electrons, and the response of the detector impacted by the energetic photon beam. All this work enabled reproduction of the experimental data. The high-energy photons produced have a large emission angle and an exponential distribution shape. In addition to the analysis of the photon spectra, positron production was also investigated. Indeed, if high-energy photons are generated inside the solid target, some positron/electron pairs may be produced by the Bethe–Heitler process. Therefore, the positron production achievable within the PETAL laser facility was quantified. To conclude the study, the possibility of creating electron/positron pairs through the linear Breit–Wheeler process with PETAL was investigated.

The hole-boring by intense laser is one of the key issues for fast ignition laser fusion, laser radiation pressure ion acceleration, generation of high energy radiations, and so on. In the hole-boring, laser pulse propagation and generation of relativistic electrons and magnetic fields are critical phenomena. When the laser intensity is higher than 1020W/cm2 and a0 is larger than 10, the self-generated quasi-static magnetic fields reaches Giga Gauss to play important roles in the electron dynamics and the laser propagation. We explore the hole-boring by a linearly and a circularly polarized laser-pulses with the 3 dimensional (3D) PIC simulations. It is found that strong longitudinal magnetic fields are generated in front of the hole-boring driven by a circular polarization laser. The circularly polarized laser is converted into spiral electromagnetic waves which include both radially polarized wave and azimuthally polarized wave in the hole. The radially polarized spiral wave generates a spiral electron beam which induces the longitudinal magnetic field. Those spiral structure-formations are essentially 3D-phenomena which are investigated in details in the first time. The spiral structure-formations may play important roles in fast ignition, radiation pressure ion acceleration, and so on.

Ultrahigh-energy density (UHED) states greater than 1 Gbar pressure are typically observed under extreme conditions, such as in the core of an inertial confinement fusion implosion. A novel alternative approach for generating volumetric UHED states is to use nanowire arrays irradiated with a femtosecond ultrahigh-intensity laser. In this paper, we present an experimental investigation on laser absorption and energy transport in nanowire arrays irradiated with a picosecond kilojoule petawatt laser. The laser–target interactions were studied by measuring the x-ray emission and escaping hot electrons from a bare Cu foil and a foil with a nanowire array grown on its surface. The measured Cu-Kα and He-α emissions from the nanowire array were higher than those from the flat foil. In addition, hot electrons observed from the front surface of the nanowire array were enhanced. On the other hand, despite the stronger Kα emission from the nanowire array and the enhancement of hot electrons escaping from the front surface of the nanowire array, the number of hot electrons observed from the rear side of the flat foil target was slightly lower than that of the flat foil. A comparison of the experimental results with the results of a two-dimensional particle-in-cell simulation code suggested that the magnetic fields generated around the periodic nanowire array trap hot electrons, improving the electron-to-target energy coupling and efficiently producing UHED states.

Abstract High energy density physics is the field of physics dedicated to the study of matter and plasmas in extreme conditions of temperature, densities and pressures. It encompasses multiple disciplines such as material science, planetary science, laboratory and astrophysical plasma science. For the latter, high energy density states can be accompanied by extreme radiation environments and super-strong magnetic fields. The creation of high energy density states in the laboratory consists in concentrating/depositing large amounts of energy in a reduced mass, typically solid material sample or dense plasma, over a time shorter than the typical timescales of heat conduction and hydrodynamic expansion. Laser-generated, high current–density ion beams constitute an important tool for the creation of high energy density states in the laboratory. Focusing plasma devices, such as cone-targets are necessary in order to focus and direct these intense beams towards the heating sample or dense plasma, while protecting the proton generation foil from the harsh environments typical of an integrated high-power laser experiment. A full understanding of the ion beam dynamics in focusing devices is therefore necessary in order to properly design and interpret the numerous experiments in the field. In this work, we report a detailed investigation of large-scale, kilojoule-class laser-generated ion beam dynamics in focusing devices and we demonstrate that high-brilliance ion beams compress magnetic fields to amplitudes exceeding tens of kilo-Tesla, which in turn play a dominant role in the focusing process, resulting either in a worsening or enhancement of focusing capabilities depending on the target geometry.

Laser plasma instabilities, such as stimulated Raman scattering (SRS) and two-plasmon decay (TPD), are basic phenomena in intense laser science and applications. In direct-drive inertial confinement fusion (ICF) where a fuel capsule is imploded by high-power lasers, SRS and TPD are generally problematic because hot electrons (HEs) generated by SRS and TPD cause fuel preheating, whereas HEs with acceptable energy are expected to contribute to ablation pressure enhancement. In all cases, it is necessary to clarify the occurrence of SRS, TPD, and subsequent HE generation. The ablator of a fuel capsule in direct-drive ICF typically consists of carbon with a variable amount of hydrogen (H). We investigated the H effects in the ablator on SRS, TPD, and HEs under direct-drive ICF conditions at the GEKKO laser facility in planer geometry. The experimental results showed an increase in SRS, TPD, and HEs when H was present in the ablator. The analysis indicated that the variations in plasma inhomogeneity and plasma temperature obtained by H addition were insufficient to explain the observed results. Thus, the enhancement is mainly attributed to the high ion acoustic wave damping driven by the H ions into the plasmas, suggesting that Langmuir decay instability caused SRS saturation, whereas other mechanisms, such as cavitation, could overwhelm the TPD saturation. These results suggest that a suitable choice of H concentration in the ablator is critical for mitigating and controlling the extent of SRS, TPD, and HEs to achieve robust and efficient implosion in direct-drive ICF.

Polystyrene deuteride shell targets with two holes were imploded by the Gekko XII laser and additionally heated by the LFEX laser in a direct fast ignition experiment. In general, when an ultra-intense laser is injected into a blow-off plasma created by the imploding laser, electrons are generated far from the target core and the energies of electrons increase because the electron acceleration distance has been extended. The blow-off plasma moves not only to the vertical direction but to the lateral direction against the target surface. In a shell target with holes, a lower effective electron temperature can be realized by reducing the inflow of the implosion plasma onto the LFEX path, and high coupling efficiency can be expected. The energies of hot electrons and ions absorbed into the target core were calculated from the energy spectra using three electron energy spectrometers and a neutron time-of-flight measurement system, Mandala. The ions have a large contribution of 74% (electron heating of 4.9 J and ion heating of 14.1 J) to target heating in direct fast ignition.

Neutrons are powerful tools for investigating the structure and properties of materials used in science and technology. Recently, laser-driven neutron sources (LDNS) have attracted the attention of different communities, from science to industry, in a variety of applications, including radiography, spectroscopy, security, and medicine. However, the laser-driven ion acceleration mechanism for neutron generation and for establishing the scaling law on the neutron yield is essential to improve the feasibility of LDNS. In this paper, we report the mechanism that accelerates ions with spectra suitable for neutron generation. We show that the neutron yield increases with the fourth power of the laser intensity, resulting in the neutron generation of 3×10^{11} in 4π at a maximum, with 1.1×10^{19} W cm^{−2}, 900 J, 1.5 ps lasers. By installing a “hand-size” moderator, which is specially designed for the LDNS, it is demonstrated that the efficient generation of epithermal (0.1–100 eV) neutrons enables the single-shot analysis of composite materials by neutron resonance transmission analysis (NRTA). We achieve the energy resolution of 2.3% for 5.19-eV neutrons 1.8 m downstream of the LDNS. This leads to the analysis of elements and isotopes within sub-μs times and allows for high-speed nondestructive inspection.

Enhanced coupling of laser energy to the target particles is a fundamental issue in laser-plasma interactions. Here the authors demonstrate increased photon absorption leading into higher laser to electron and proton energy transfer through the interference of multiple coherent beamlets.

Laser-generated ion acceleration has received increasing attention due to recent progress in super-intense lasers. Here the authors demonstrate the role of the self-generated magnetic field on the ion acceleration and limitations on the energy scaling with laser intensity.

In intense laser-plasma interactions, maximizing the density of fast electrons in the laser spot area is key to achieving plasma heating and particle acceleration. We find that when the laser spot size is large compared with the target foil thickness, fast electrons circulating in the foil show a “random walk” in the lateral direction due to the scattering by fluctuating fields at the plasma surface inside the spot area. We model the lateral motion as a diffusion, and find the resulting diffusion velocity is much slower than the speed of the ballistic transport. Hence, fast electrons accumulate in the spot region, and over time their density becomes typically 10 times greater than the laser-accelerated fast electron density. The enhancement of fast electron density in the target pushes the ion acceleration to more efficient regime.

Motivated by the development of next-generation heavy-ion sources, we have investigated the ionization and acceleration dynamics of an ultraintense laser-driven high-Z silver target, experimentally, numerically, and analytically. Using a novel ion measurement technique allowing us to uniquely identify silver ions, we experimentally demonstrate generation of highly charged silver ions (Z^{*}=45_{−2}^{+2}) with energies of >20 MeV/nucleon (>2.2 GeV) from submicron silver targets driven by a laser with intensity 5×10^{21}W/cm^{2}, with increasing ion energy and charge state for decreasing target thickness. We show that although target pre-expansion by the unavoidable rising edge of state-of-the-art high-power lasers can limit proton energies, it is advantageous for heavy-ion acceleration. Two-dimensional particle-in-cell simulations show that the Joule heating in the target bulk results in a high temperature (∼10keV) solid density plasma, leading to the generation of high flux highly charged ions (Z^{*}=40_{−2}^{+2}, ≳10MeV/nucleon) via electron collisional ionization, which are extracted and accelerated with a small divergence by an extreme sheath field at the target rear. However, with reduced target thickness this favorable acceleration is degraded due to the target deformation via laser hole boring, which accompanies higher energy ions with higher charge states but in an uncontrollable manner. Our elucidation of the fundamental processes of high-intensity laser-driven ionization and ion acceleration provides a path for improving the control and parameters of laser-driven heavy-ion sources, a key component for next-generation heavy-ion accelerators.

We report new results from the intense laser target interaction experiment that produces relativistic electron–positron pairs. Laser to electron energy transfer, inferred using x-ray and neutron measurements, was found to be consistent with the measured positrons. To increase the number of positrons, one needs to deliver a greater number of relativistic electrons from the laser–plasma interaction to the high Z gold target. A large preplasma was found to have a negative impact for this purpose, while the laser could produce hotter electrons in such preplasma. The peak energy shift in the positron spectrum is confirmed as the post-acceleration in the sheath potential behind the target. The results were supported by a collisional one-dimensional particle-in-cell code. This experiment was performed using the high-power LFEX laser at the Institute of Laser Engineering at Osaka University using a suite of diagnostics measuring electrons, positrons, x-rays and neutrons from the laser–target interaction at the relativistic regime.

Cone-guided fast ignition laser fusion depends critically on details of the interaction of an intense laser pulse with the inside tip of a cone. Generation of relativistic electrons in the laser plasma interaction (LPI) with a gold cone and their subsequent transport into a copper wire have been studied using a kJ-class intense laser pulse, OMEGA EP (850 J, 10 ps). We observed that the laser-pulse-energy-normalized copper K α signal from the Cu wire attached to the Au cone is significantly reduced (by a factor of 5) as compared to that from identical targets using the Titan laser (150 J, 0.7 ps) with 60 × less energy in the prepulse. We conclude that the decreased coupling is due to increased prepulse energy rather than 10 ps pulse duration, for which this effect has not been previously explored. The collisional particle-in-cell code PICLS demonstrates that the preformed plasma has a significant impact on generation of electrons and their transport. In particular, a longer scale length preplasma significantly reduces the energy coupling from the intense laser to the wire due to the larger offset distance between the relativistic critical density surface and the cone tip as well as a wider divergence of source electrons. We also observed that laser-driven plasma ionization increase in the LPI region can potentially alter the electron density profile during the laser interaction, forcing the electron source to be moved farther away from the cone tip which contributes to the reduction of energy coupling.

High-intensity, short-pulse lasers are crucial for generating energetic electrons that produce high-energy-density (HED) states in matter, offering potential applications in igniting dense fusion fuels for fast ignition laser fusion. High-density targets heated by these electrons exhibit spatially non-uniform and highly transient conditions, which have been challenging to characterize due to limitations in diagnostics that provide simultaneous high spatial and temporal resolution. Here, we employ an X-ray Free Electron Laser (XFEL) to achieve spatiotemporally resolved measurements at sub-micron and femtosecond scales on a solid-density copper foil heated by laser-driven fast electrons. Our X-ray transmission imaging reveals the formation of a solid-density hot plasma localized to the laser spot size, surrounded by Fermi degenerate, warm dense matter within a picosecond, and the energy relaxation occurring within the hot plasma over tens of picoseconds. These results validate 2D particle-in-cell simulations incorporating atomic processes and provide insights into the energy transfer mechanisms beyond current simulation capabilities. This work significantly advances our understanding of rapid fast electron heating and energy relaxation in solid-density matter, serving as a key stepping stone towards efficient high-density plasma heating and furthering the fields of HED science and inertial fusion energy research using intense, short-pulse lasers., (© 2024. The Author(s).)

There is a strong demand for efficient second harmonic generation (SHG) in ultra-intense short-pulse lasers. This paper demonstrates the generation of an unconverted fundamental (1ω)+second harmonics (2ω) mixed laser on the LFEX laser system. The experimental setup utilizes 0.5 mm-thick LBO crystal plates in a focusing beams implemented after an off-axis parabola, the design reduces the size and cost of the SHG system. The LFEX laser beams with four-beams combined energy of 222 J and a pulse duration of 1.5 ps, is successfully converted to 102 J of 2ω light and 100 J of unconverted 1ω light, 20 J is lost through surface reflections, and they are mixed at the focal point. Verification of successful SHG is confirmed through X-ray pinhole imaging and electron spectrometry. This novel technique is not limited to LFEX lasers and holds applicability for various ultra-intense lasers. Consequently, this accomplishment significantly contributes to expanding the capability for high-energy density laser-plasma experiments.

A counter-propagating laser-beam platform using a spherical plasma mirror was developed for the kilojoule-class petawatt LFEX laser. The temporal and spatial overlaps of the incoming and redirected beams were measured with an optical interferometer and an x-ray pinhole camera. The plasma mirror performance was evaluated by measuring fast electrons, ions, and neutrons generated in the counter-propagating laser interaction with a Cu-doped deuterated film on both sides. The reflectivity and peak intensity were estimated as ∼50% and ∼5 × 10 18 W/cm 2 , respectively. The platform could enable studies of counter-streaming charged particles in high-energy-density plasmas for fundamental and inertial confinement fusion research.

High energy density physics is the field of physics dedicated to the study of matter and plasmas in extreme conditions of temperature, densities and pressures. It encompasses multiple disciplines such as material science, planetary science, laboratory and astrophysical plasma science. For the latter, high energy density states can be accompanied by extreme radiation environments and super-strong magnetic fields. The creation of high energy density states in the laboratory consists in concentrating/depositing large amounts of energy in a reduced mass, typically solid material sample or dense plasma, over a time shorter than the typical timescales of heat conduction and hydrodynamic expansion. Laser-generated, high current-density ion beams constitute an important tool for the creation of high energy density states in the laboratory. Focusing plasma devices, such as cone-targets are necessary in order to focus and direct these intense beams towards the heating sample or dense plasma, while protecting the proton generation foil from the harsh environments typical of an integrated high-power laser experiment. A full understanding of the ion beam dynamics in focusing devices is therefore necessary in order to properly design and interpret the numerous experiments in the field. In this work, we report a detailed investigation of large-scale, kilojoule-class laser-generated ion beam dynamics in focusing devices and we demonstrate that high-brilliance ion beams compress magnetic fields to amplitudes exceeding tens of kilo-Tesla, which in turn play a dominant role in the focusing process, resulting either in a worsening or enhancement of focusing capabilities depending on the target geometry., (© 2022. The Author(s).)

Increasing the laser energy absorption into energetic particle beams represents a longstanding quest in intense laser-plasma physics. During the interaction with matter, part of the laser energy is converted into relativistic electron beams, which are the origin of secondary sources of energetic ions, γ-rays and neutrons. Here we experimentally demonstrate that using multiple coherent laser beamlets spatially and temporally overlapped, thus producing an interference pattern in the laser focus, significantly improves the laser energy conversion efficiency into hot electrons, compared to one beam with the same energy and nominal intensity as the four beamlets combined. Two-dimensional particle-in-cell simulations support the experimental results, suggesting that beamlet interference pattern induces a periodical shaping of the critical density, ultimately playing a key-role in enhancing the laser-to-electron energy conversion efficiency. This method is rather insensitive to laser pulse contrast and duration, making this approach robust and suitable to many existing facilities.

Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in inertial confinement fusion (ICF) ignition sparks. Laser-produced relativistic electron beam (REB) deposits a part of kinetic energy in the core, and then the heated region becomes the hot spark to trigger the ignition. However, due to the inherent large angular spread of the produced REB, only a small portion of the REB collides with the core. Here, we demonstrate a factor-of-two enhancement of laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a magnetic field of hundreds of Tesla that is applied to the transport region from the REB generation zone to the core which results in guiding the REB along the magnetic field lines to the core. This scheme may provide more efficient energy coupling compared to the conventional ICF scheme.

High-power lasers in the relativistic intensity regime with multi-picosecond pulse durations are available in many laboratories around the world. Laser pulses at these intensities reach giga-bar level radiation pressures, which can push the plasma critical surface where laser light is reflected. This process is referred to as the laser hole boring (HB), which is critical for plasma heating, hence essential for laser-based applications. Here we derive the limit density for HB, which is the maximum plasma density the laser can reach, as a function of laser intensity. The time scale for when the laser pulse reaches the limit density is also derived. These theories are confirmed by a series of particle-in-cell simulations. After reaching the limit density, the plasma starts to blowout back toward the laser, and is accompanied by copious superthermal electrons; therefore, the electron energy can be determined by varying the laser pulse length.

High-intensity lasers interacting with solid foils produce copious numbers of relativistic electrons, which in turn create strong sheath electric fields around the target. The proton beams accelerated in such fields have remarkable properties, enabling ultrafast radiography of plasma phenomena or isochoric heating of dense materials. In view of longer-term multidisciplinary purposes (e.g., spallation neutron sources or cancer therapy), the current challenge is to achieve proton energies well in excess of 100 MeV, which is commonly thought to be possible by raising the on-target laser intensity. Here we present experimental and numerical results demonstrating that magnetostatic fields self-generated on the target surface may pose a fundamental limit to sheath-driven ion acceleration for high enough laser intensities. Those fields can be strong enough (~10 5  T at laser intensities ~10 21  W cm -2 ) to magnetize the sheath electrons and deflect protons off the accelerating region, hence degrading the maximum energy the latter can acquire.

Using one of the world most powerful laser facility, we demonstrate for the first time that high-contrast multi-picosecond pulses are advantageous for proton acceleration. By extending the pulse duration from 1.5 to 6 ps with fixed laser intensity of 10 18  W cm -2 , the maximum proton energy is improved more than twice (from 13 to 33 MeV). At the same time, laser-energy conversion efficiency into the MeV protons is enhanced with an order of magnitude, achieving 5% for protons above 6 MeV with the 6 ps pulse duration. The proton energies observed are discussed using a plasma expansion model newly developed that takes the electron temperature evolution beyond the ponderomotive energy in the over picoseconds interaction into account. The present results are quite encouraging for realizing ion-driven fast ignition and novel ion beamlines.

Pellet injection and repetitive laser illumination are key technologies for realizing inertial fusion energy. Numerous studies have been conducted on target suppliers, injectors, and tracking systems for flying pellet engagement. Here we for the first time demonstrate the pellet injection, counter laser beams' engagement and neutron generation. Deuterated polystyrene (CD) bead pellets, after free-falling for a distance of 18 cm at 1 Hz, are successfully engaged by two counter laser beams from a diode-pumped, ultra-intense laser HAMA. The laser energy, pulse duration, wavelength, and the intensity are 0.63 J per beam, 104 fs, and 811 nm, 4.7 × 10(18) W/cm(2), respectively. The irradiated pellets produce D(d,n)(3)He-reacted neutrons with a maximum yield of 9.5 × 10(4)/4π sr/shot. Moreover, the laser is found out to bore a straight channel with 10 μm-diameter through the 1-mm-diameter beads. The results indicate potentially useful technologies and findings for the next step in realizing inertial fusion energy.

The development of ultra-intense lasers has facilitated new studies in laboratory astrophysics and high-density nuclear science, including laser fusion. Such research relies on the efficient generation of enormous numbers of high-energy charged particles. For example, laser-matter interactions at petawatt (10(15) W) power levels can create pulses of MeV electrons with current densities as large as 10(12) A cm(-2). However, the divergence of these particle beams usually reduces the current density to a few times 10(6) A cm(-2) at distances of the order of centimetres from the source. The invention of devices that can direct such intense, pulsed energetic beams will revolutionize their applications. Here we report high-conductivity devices consisting of transient plasmas that increase the energy density of MeV electrons generated in laser-matter interactions by more than one order of magnitude. A plasma fibre created on a hollow-cone target guides and collimates electrons in a manner akin to the control of light by an optical fibre and collimator. Such plasma devices hold promise for applications using high energy-density particles and should trigger growth in charged particle optics.