Search

This paper proposes a novel three-phase ac--dc buckboost converter. The proposed converter uses four active switches, which are driven by only one control signal. This converter is operated in discontinuous conduction mode (DCM) by using the pulsewidth modulation (PWM) technique, and the control scheme very easily and simply achieves purely sinusoidal input current, high power factor, low total harmonic distortion of the input current (TH[D.sub.i]) and step-up/down output voltage. Also, the proposed converter provides a constant average current to the output capacitor and load in each switching period. Thus, the ripple component of sixth times line frequency will not appear in the output voltage. Therefore, a smaller output capacitor can be used in the proposed converter. Moreover, the steady-state analysis of voltage gain and boundary operating condition are presented. Also, the selections of inductor, output capacitor and input filter are depicted. Finally, a prototype circuit with simple control logic is implemented to illustrate the theoretical analysis. Index Terms--Buck-boost converter, discontinuous conduction mode (DCM), pulsewidth modulation (PWM), TH[D.sub.i].

A novel high step-up dc-dc converter with coupled-inductor and switched-capacitor techniques is proposed in this paper. The capacitors are charged in parallel and are discharged in series by the coupled inductor, stacking on the output capacitor. Thus, the proposed converter can achieve high step-up voltage gain with appropriate duty ratio. Besides, the voltage spike on the main switch can be clamped. Therefore, low on-state resistance RDS(ON) of the main switch can be adopted to reduce the conduction loss. The efficiency can be improved. The operating principle and steady-state analyses are discussed in detail. Finally, a prototype circuit with 24-V input voltage, 400-V output voltage, and 200-W output power is implemented in the laboratory. Experiment results confirm the analysis and advantages of the proposed converter. [ABSTRACT FROM PUBLISHER]

A novel bidirectional dc–dc converter is presented in this paper. The circuit configuration of the proposed converter is very simple. The proposed converter employs a coupled inductor with same winding turns in the primary and secondary sides. In step-up mode, the primary and secondary windings of the coupled inductor are operated in parallel charge and series discharge to achieve high step-up voltage gain. In step-down mode, the primary and secondary windings of the coupled inductor are operated in series charge and parallel discharge to achieve high step-down voltage gain. Thus, the proposed converter has higher step-up and step-down voltage gains than the conventional bidirectional dc–dc boost/buck converter. Under same electric specifications for the proposed converter and the conventional bidirectional boost/buck converter, the average value of the switch current in the proposed converter is less than the conventional bidirectional boost/buck converter. The operating principle and steady-state analysis are discussed in detail. Finally, a 14/42-V prototype circuit is implemented to verify the performance for the automobile dual-battery system. [ABSTRACT FROM AUTHOR]

In this paper, a novel high step-up dc–dc converter with coupled-inductor and voltage-doubler circuits is proposed. The converter achieves high step-up voltage gain with appropriate duty ratio and low voltage stress on the power switches. Also, the energy stored in the leakage inductor of the coupled inductor can be recycled to the output. The operating principles and the steady-state analyses of the proposed converter are discussed in detail. Finally, a prototype circuit of the proposed converter is implemented in the laboratory to verify the performance of the proposed converter. [ABSTRACT FROM AUTHOR]