Search

Abstract: The effects of solvents, fluorinated monomer content and film-formation methods on the surface structures of random copolymers composed of methyl methacrylate (MMA) and 2-perfluorooctylethyl methacrylate (FMA) were investigated by contact angle goniometry, X-ray photoelectron spectroscopy, sum frequency generation (SFG) vibrational spectroscopy and surface tension measurement. It is found that, with cyclohexanone as the solvent, there is a critical FMA content of 9mol%, below which the copolymer films by spin coating have a more surface segregation extent of fluorinated moieties than those by solution casting; above which the copolymer films by solution casting have a more surface segregation extent of fluorinated moieties than those by spin coating. However, with toluene as solvent, the critical FMA content lowers down to 3mol%. We believe that the solvent nature and the content of fluorinated moieties in the random copolymer have the great effect because the combined effect of these two factors can determine the random copolymer chain conformations and their thermodynamic dominating factors in the solution and at the solution–air interface. A thermodynamic analysis combining the entropic and enthalpic effects is suggested to explain the observed phenomenon. This research is believed to obtain an enhanced understanding of the surface formation mechanism of the polymer films and thus demonstrate how to promote the segregation of fluorinated moieties at the polymer film surfaces. [Copyright &y& Elsevier]

This study aimed to improve the stability and catalytic properties of Thermomyces lanuginosus lipase (TLL) adsorbed on a hydrophobic support. At the optimized conditions (pH 5 and 25 °C without any additions), the Sips isotherm model effectively fitted the equilibrium adsorption data, indicating a monolayer and the homogenous distribution of immobilized lipase molecules. To preserve the high specific activity of adsorbed lipase, the immobilized lipase (IL) with a moderate loading amount (approximately 40% surface coverage) was selected. Polyethylenimine (PEI) and chitosan (CS) were successfully applied as bridging units to in situ crosslink the immobilized lipase molecules in IL. At the low polymer concentration (0.5%, w/w) and with 1 h incubation, insignificant changes in average pore size were detected. Short-chain PEI and CS (MW ≤ 2 kDa) efficiently improved the lipase stability, i.e., the lipase loss decreased from 40% to <2%. Notably, CS performed much better than PEI in maintaining lipase activity. IL crosslinked with CS-2 kDa showed a two- to three-fold higher rate when hydrolyzing p-nitrophenyl butyrate and a two-fold increase in the catalytic efficiency in the esterification of hexanoic acid with butanol. These in situ crosslinking strategies offer good potential for modulating the catalytic properties of TLL for a specific reaction. [ABSTRACT FROM AUTHOR]

Increase of pectinase activity is especially important in fermentation industry. Understanding of the metabolic mechanisms can find metabolic modulation approach to promote high yield of pectinase. Higher activity of pectinase was detected in DY1 than DY2, two strains of Bacillus licheniformis. GC-MS-based metabolomics identified differential metabolome of DY2 compared with DY1, characterizing the increased TCA cycle and biosynthesis of fatty acids. Elevated activity of pyruvate dehydrogenase (PDH), α-ketoglutaric dehydrogenase (KGDH) and succinate dehydrogenase (SDH) showed global elevation of carbon metabolism, which is consistent with the result that lowers glucose in DY2 than DY1. Inhibitors malonate, furfural and triclosan, of PDH, SDH and biosynthesis of fatty acids, promoted pectinase activity, where triclosan increased pectinase activity by 179%. These results indicate that functional metabolomics is an effective approach to understand metabolic mechanisms of fermentation production and provides clues to develop new methods for changing bacterial physiology and production. [ABSTRACT FROM AUTHOR]

Malachite green (MG) was decolorized by laccase (LacA) of white-rot fungus Cerrena sp. with strong decolorizing ability. Decolorization conditions were optimized with response surface methodology. A highly significant quadratic model was developed to investigate MG decolorization with LacA, and the maximum MG decolorization ratio of 91.6% was predicted under the conditions of 2.8 U mL-1 LacA, 109.9 mg L-1 MG and decolorization for 172.4 min. Kinetic studies revealed the Km and kcat values of LacA toward MG were 781.9 mM and 9.5 s-1, respectively. UV–visible spectra confirmed degradation of MG, and the degradation mechanism was explored with liquid chromatography–mass spectrometry (LC-MS) analysis. Based on the LC-MS spectra of degradation products, LacA catalyzed MG degradation via two simultaneous pathways. In addition, the phytotoxicity of MG, in terms of inhibition on seed germination and seedling root elongation of Nicotiana tabacum and Lactuca sativa, was reduced after laccase treatment. These results suggest that laccase of Cerrena was effective in decolorizing MG and promising in bioremediation of wastewater in food and aquaculture industries. [ABSTRACT FROM AUTHOR]

Laccases (EC 1.10.3.2) are a class of multi-copper oxidases with important industrial values. A basidiomycete strain Cerrena sp. HYB07 with high laccase yield was identified. After cultivation in the shaking flask for 4 days, a maximal activity of 210.8 U mL−1 was attained. A 58.6-kDa laccase (LacA) with 7.2% carbohydrate and a specific activity of 1952.4 U mg−1 was purified. 2,2′-Azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) was the optimal substrate, with Km and kcat being 93.4 µM and 2468.0 s−1, respectively. LacA was stable at 60°C, pH 5.0 and above, and in organic solvents. Metal ions Na+, K+, Ca2+, Mg2+, Mn2+, Zn2+ enhanced LacA activity, while Fe2+ and Li+ inhibited LacA activity. LacA decolorized structurally different dyes and a real textile effluent. Its gene and cDNA sequences were obtained. Putative cis-acting transcriptional response elements were identified in the promoter region. The high production yield and activity, robustness and dye decolorizing capacity make LacA and Cerrena sp. HYB07 potentially useful for industrial and environmental applications such as textile finishing and wastewater treatment. [ABSTRACT FROM AUTHOR]

Abstract: New fluorinated copolymers of poly(methyl methacrylate)-b-poly(butyl methacrylate) or poly(n-octadecyl methacrylate) end-capped with 2-perfluorooctylethyl methacrylate (PMMA x -b-PBMA y -ec-PFMA z or PMMA x -b-PODMA y -ec-PFMA z ) were synthesized by living atom transfer radical polymerization. Thin films made of PMMA230-b-PODMA y -ec-PFMA1 were characterized by differential scanning calorimetry, angle-resolved X-ray photoelectron spectroscopy and X-ray diffraction. These films were found to exhibit robust surface segregation of the end groups. Furthermore, the fluorine enrichment factor at the film surface was found to increase linearly with increasing degree of polymerization of poly(n-octadecyl methacrylate) and its increasing fusion enthalpy in the second block, which enhances the segregation of the fluorinated moieties. [Copyright &y& Elsevier]

Aflatoxin B1 (AFB1) is a known toxic human carcinogen and can be detoxified by laccases, which are multicopper oxidases that convert several environmental pollutants and toxins. In this study, a new laccase that could catalyze AFB1 degradation was purified and identified from the white-rot fungus Cerrena unicolor 6884. The laccase was purified using (NH4)2SO4 precipitation and anion exchange chromatography, and then identified as Lac 2 through zymogram and UHPLC-MS/MS based on the Illumina transcriptome analysis of C. unicolor 6884. Six putative laccase protein sequences were obtained via functional annotation. The lac 2 cDNA encoding a full-length protein of 512 amino acids was cloned and sequenced to expand the fungus laccase gene library for AFB1 detoxification. AFB1 degradation by Lac 2 was conducted in vitro at pH 7.0 and 45 °C for 24 h. The half-life of AFB1 degradation catalyzed by Lac 2 was 5.16 h. Acetosyringone (AS), Syrinagaldehyde (SA) and [2,2′ -azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid)] (ABTS) at 1 mM concentration seemed to be similar mediators for strongly enhancing AFB1 degradation by Lac 2. The product of AFB1 degradation catalyzed by Lac 2 was traced and identified to be Aflatoxin Q1 (AFQ1) based on mass spectrometry data. These findings are promising for a possible application of Lac 2 as a new aflatoxin oxidase in degrading AFB1 present in food and feeds. [ABSTRACT FROM AUTHOR]