Search

This paper investigates a master unmanned aerial vehicle (MUAV)-powered Internet of Things (IoT) network, in which we propose using a rechargeable auxiliary UAV (AUAV) equipped with an intelligent reflecting surface (IRS) to enhance the communication signals from the MUAV and also leverage the MUAV as a recharging power source. Under the proposed model, we investigate the optimal collaboration strategy of these energy-limited UAVs to maximize the accumulated throughput of the IoT network. Depending on whether there is charging between the two UAVs, two optimization problems are formulated. To solve them, two multi-agent deep reinforcement learning (DRL) approaches are proposed, which are centralized training multi-agent deep deterministic policy gradient (CT-MADDPG) and multi-agent deep deterministic policy option critic (MADDPOC). It is shown that the CT-MADDPG can greatly reduce the requirement on the computing capability of the UAV hardware, and the proposed MADDPOC is able to support low-level multi-agent cooperative learning in the continuous action domains, which has great advantages over the existing option-based hierarchical DRL that only support single-agent learning and discrete actions.

In recent years, intelligent reflecting surface (IRS) has emerged as a promising technology for 6G due to its potential/ability to significantly enhance energy- and spectrum-efficiency. To this end, it is crucial to adjust the phases of reflecting elements of the IRS, and most of the research works focus on how to optimize/quantize the phase for different optimization objectives. In particular, the quantized phase shift (QPS) is assumed to be available at the IRS, which, however, does not always hold and should be fed back to the IRS in practice. Unfortunately, the feedback channel is generally bandwidth-limited, which cannot support a huge amount of feedback overhead of the QPS particularly for a large number of reflecting elements and/or the quantization level of each reflecting element. In order to break this bottleneck, in this letter, we propose a convolutional autoencoder-based scheme, in which the QPS is compressed on the receiver side and reconstructed on the IRS side. In order to solve the problems of mismatched distribution and vanishing gradient, we remove the batch normalization (BN) layers and introduce a denosing module. By doing so, it is possible to achieve a high compression ratio with a reliable reconstruction accuracy in the bandwidth-limited feedback channel, and it is also possible to accommodate existing works assuming available QPS at the IRS. Simulation results confirm the high reconstruction accuracy of the feedback/compressed QPS through a feedback channel, and show that the proposed scheme can significantly outperform the existing compression algorithms.

Ambient backscatter communication (AmBC), a promising solution to future Internet of Things (IoT), has attracted increasing attention from both academia and industry in recent years. AmBC systems enable communications between RF-powered devices (e.g., tags and sensors) and AmBC receivers by utilizing ambient RF source signals from existing communication systems. Thus it offers a low-cost and energy-efficient means of communications for future IoT applications. In the current AmBC research, the impact of using channel coding on existing primary networks in terms of the bit-error-rate (BER) performance of the AmBC systems are mostly ignored. Low-density parity-check (LDPC) codes that offer fast encoding and decoding process have been proposed as promising channel codes in the fifth-generation (5 G) networks. In this paper, we investigate the BER performance of an AmBC system that uses LDPC-coded RF source signals. We have analytically derived the BER upper and lower bounds of both the RF source and tag signals for our proposed AmBC system. Simulation results show that the BERs of both signals decrease significantly, compared to conventional AmBC systems with uncoded RF source signals.

With the recent advances in wireless communications, the automotive industry is leading to evolution. To succeed in this emerging era of technology, the Internet of Connected Vehicles (IoCV) has emerged as one of the potential applications of the Internet of Things (IoT). It refers to the dynamic mobile communication systems that communicate between vehicles and public networks to enhance the connectivity between cars via technology. By offering a wide variety of infotainment services, fleet operations, and in-vehicle applications, IoCV has gained the tremendous capacity to provide a safer and sustainable transportation system to the society. According to Gartner Inc., “the connected car is already a reality, and in-vehicle wireless connectivity is expanding rapidly.” As a result, the evolution of cars into the IoT will keep on accelerating the global market which is expected to grow by 270% by 2022. Furthermore, the increasing deployment of sensors and ever-evolving cognitive technology opens up new opportunities for IoCV. Due to these significant developments, connected vehicles are receiving widespread attention from the major automotive giants such as Tesla, BMW, Waymo (Google), Uber, Volvo, and so on. Despite all the opportunities offered by the IoCV, their highly dynamic topology and the increasing number of vehicles pose challenges regarding delivering low-latency vehicle-to-everything (V2X) communications.

In this paper, a novel reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) symbiotic radio (SR) system is proposed, in which an RIS, operating as a secondary transmitter (STx), sends messages to a multi-antenna secondary receiver (SRx) by using cognitive backscattering communication, and simultaneously, it enhances the primary transmission from a multi-antenna primary transmitter (PTx) to a multi-antenna primary receiver (PRx) by intelligently reconfiguring the wireless environment. We are interested in the joint design of active transmit beamformer at the PTx and passive reflecting beamformer at the STx to minimize the total transmit power at the PTx, subject to the signal-to-noise-ratio (SNR) constraint for the secondary transmission and the rate constraint for the primary transmission. Due to the non-convexity of the formulated problem, we decouple the original problem into a series of subproblems using the alternating optimization method and then iteratively solve them. The convergence performance and computational complexity of the proposed algorithm are analyzed. Furthermore, we develop a low-complexity algorithm to design the reflecting beamformer by solving a backscatter link enhancement problem through the semi-definite relaxation (SDR) technique. Then, theoretical analysis is performed to reveal the insights of the proposed system. Finally, simulation results are presented to validate the effectiveness of the proposed algorithms and the superiority of the proposed system.

Cognitive radio (CR) is a promising technology enabling efficient utilization of the spectrum resource for future wireless systems. As future CR networks are envisioned to operate over a wide frequency range, advanced wideband spectrum sensing (WBSS) capable of quickly and reliably detecting idle spectrum bands across a wide frequency span is essential. In this article, we provide an overview of recent advances on sub-Nyquist sampling-based WBSS techniques, including compressed sensing-based methods and compressive covariance sensing-based methods. An elaborate discussion of the pros and cons of each approach is presented, along with some challenging issues for future research. A comparative study suggests that the compressive covariance sensing-based approach offers a more competitive solution for reliable real-time WBSS., Comment: This paper has been accepted by IEEE Wireless Communications Magazine for future publication

Proactive reconfiguration of network slices according to uncertain traffic demands is essential to improve network resource utilization while ensuring service quality in 5G-and-beyond systems. Existing researches on network slice reconfiguration are either model-driven or data-driven methods. However, model-driven methods may cause resource over-provisioning due to a lack of prediction mechanism, while data-driven methods are unrealistic in inter-slice reconfiguration that involves costly and time-consuming operations such as VNF migration. To address these issues, in this paper, we propose a Hybrid Model-Data driven (HMD) framework that intelligently performs inter-slice reconfiguration by leveraging prediction interval and robust optimization. We design a Prediction Interval-oriented Predictor (PIP) to produce a prediction interval that can bracket the future traffic demand with a prespecified probability. Based on the prediction interval, we design an inter-slice reconfiguration scheme (named box optimizer) to perform fast inter-slice reconfigurations. To tackle the over-conservativeness of the box optimizer, we further design the ellipsoid optimizer with better optimality at a cost of increased complexity. Numerical results demonstrate that the proposed framework can provide high robustness with low power consumption. Meanwhile, the trade-off between the power consumption and the realized robustness can be flexibly adjusted according to the type of slice and the level of traffic demand fluctuations.

To support massive access for future wireless networks, we propose a novel reconfigurable intelligent surface (RIS)-enhanced downlink multi-user multi-input single-output (MU-MISO) symbiotic radio (SR) system. In the proposed system, each RIS not only enhances the primary transmission from the primary transmitter (PT) to the associated primary receiver (PR) nearby, but also acts as an Internet-of-Things (IoT) device to enable IoT transmissions to the same PR. Therefore, each PR needs to jointly decode the information from both the PT and its corresponding RIS. We are interested in maximizing the weighted sum-rate of both primary and IoT transmissions by jointly designing the active transmit beamforming at PT and the passive beamforming at each RIS under the maximum transmit power constraint at the PT and various constraints on the reflection coefficients (RCs), which include the ideal, continuous-phase and the discrete-phase cases. The formulated problem is non-convex, which cannot be solved directly. Thus, fractional programming (FP) method and alternating optimization (AO) technique are adopted to tackle the problem. In particular, three low-complexity algorithms are proposed to trade off between computational complexity and convergence rate. Compared to different benchmark schemes, simulation results demonstrate that with the aid of the RISs, the PRs can benefit from the enhanced primary transmission from the PT, and receive information from the associated RISs via IoT transmission.

We consider a typical heterogeneous network (HetNet), in which multiple access points (APs) are deployed to serve users by reusing the same spectrum band. Since different APs and users may cause severe interference to each other, advanced power control techniques are needed to manage the interference and enhance the sum-rate of the whole network. Conventional power control techniques first collect instantaneous global channel state information (CSI) and then calculate sub-optimal solutions. Nevertheless, it is challenging to collect instantaneous global CSI in the HetNet, in which global CSI typically changes fast. In this article, we exploit deep reinforcement learning (DRL) to design a multi-agent power control algorithm, which has a centralized-training-distributed-execution framework. To be specific, each AP acts as an agent with a local deep neural network (DNN) and we propose a multiple-actor-shared-critic (MASC) method to train the local DNNs separately in an online trial-and-error manner. With the proposed algorithm, each AP can independently use the local DNN to control the transmit power with only local observations. Simulations results show that the proposed algorithm outperforms the conventional power control algorithms in terms of both the converged average sum-rate and the computational complexity.

In this letter, the joint power control of D2D users and the passive beamforming of reconfigurable intelligent surfaces (RIS) for a RIS-aided device-to-device (D2D) communication network is investigated to maximize energy efficiency. This non-convex optimization problem is divided into two subproblems, which are passive beamforming and power control. The two subproblems are optimized alternately. We first decouple the passive beamforming at RIS based on the Lagrangian dual transform. This problem is solved by using fractional programming. Then we optimize the power control by using the Dinkelbach method. By iteratively solving the two subproblems, we obtain a suboptimal solution for the joint optimization problem. Numerical results have verified the effectiveness of the proposed algorithm, which can significantly improve the energy efficiency of the D2D network., Comment: 4 pages, 4 figures

Non-Terrestrial Networks (NTNs) composed of space-borne (e.g., satellites) and airborne vehicles (e.g., drones and blimps) have recently been proposed by 3GPP as a new paradigm of infrastructures to enhance the capacity and coverage of existing terrestrial wireless networks. The mobility of non-terrestrial base stations (NT-BSs) however leads to a dynamic environment, which imposes unique challenges for handover and throughput optimization particularly in multi-user access control for NTNs. To achieve performance optimization, each terrestrial user equipment (UE) should autonomously estimate the dynamics of moving NT-BSs, which is different from the existing user access control schemes in terrestrial wireless networks. Consequently, new learning schemes for optimum multi-user access control are desired. In this article, we therefore propose a UE-driven deep reinforcement learning (DRL) based scheme, in which a centralized agent deployed at the backhaul side of NT-BSs is responsible for training the parameter of a deep Q-network (DQN), and each UE independently makes its own access decisions based on the parameter from the trained DQN. With the proposed scheme, each UE is able to access a proper NT-BS intelligently to enhance the long-term system throughput and avoid frequent handovers among NT-BSs. Through comprehensive simulation studies, we justify the performance of the proposed scheme, and show its effectiveness in addressing the fundamental issues in the NTNs deployment.

Backscatter communication which enables wireless-powered backscatter devices (BDs) to transmit information by reflecting incident signals, is an energy- and cost-efficient communication technology for Internet-of-Things. This paper considers an unmanned aerial vehicle (UAV)-assisted backscatter communication network (UBCN) consisting of multiple BDs and carrier emitters (CEs) on the ground as well as a UAV. A communicate-while-fly scheme is first designed, in which the BDs illuminated by their associated CEs transmit information to the flying UAV in a time-division-multiple-access manner. Considering the critical issue of the UAV's limited on-board energy and the CEs' transmission energy, we maximize the energy efficiency (EE) of the UBCN by jointly optimizing the UAV's trajectory, the BDs' scheduling, and the CEs' transmission power, subject to the BDs' throughput constraints and harvested energy constraints, as well as other practical constraints. Furthermore, we propose an iterative algorithm based on the block coordinated decent method to solve the formulated mixed-integer non-convex problem, in each iteration of which the variables are alternatively optimized by leveraging the cutting-plane technique, the Dinkelbach's method and the successive convex approximation technique. Also, the convergence and complexity of the proposed algorithm are analyzed. Finally, simulation results show that the proposed communicate-while-fly scheme achieves significant EE gains compared with the benchmark hover-and-fly scheme. Useful insights on the optimal trajectory design and resource allocation are also obtained., Comment: This paper has 31 pages and 10 figures. It is submitted for possible journal publications

The heterogenous wireless services and exponentially growing traffic call for novel spectrum- and energy-efficient wireless communication technologies. Recently, a new technique, called symbiotic radio (SR), is proposed to exploit the benefits and address the drawbacks of cognitive radio (CR) and ambient backscattering communications (AmBC), leading to mutualism spectrum sharing and highly reliable backscattering communications. In particular, the secondary transmitter (STx) in SR transmits messages to the secondary receiver (SRx) over the RF signals originating from the primary transmitter (PTx) based on cognitive backscattering communications, thus the secondary system shares not only the radio spectrum, but also the power, and infrastructure with the primary system. In return, the secondary transmission provides beneficial multipath diversity to the primary system, therefore the two systems form mutualism spectrum sharing. More importantly, joint decoding is exploited at SRx to achieve highly reliable backscattering communications. In this article, to exploit the full potential of SR, we provide a systematic view for SR and address three fundamental tasks in SR: (1) enhancing the backscattering link via active load; (2) achieving highly reliable communications through joint decoding; and (3) capturing PTx’s RF signals using reconfigurable intelligent surfaces. Emerging applications, design challenges and open research problems will also be discussed.

Network slicing (NS) has been widely identified as a key architectural technology for 5G-and-beyond systems by supporting divergent requirements in a sustainable way. In radio access network (RAN) slicing, due to the device-base station (BS)-NS three layer association relationship, device association (including access control and handoff management) becomes an essential yet challenging issue. With the increasing concerns on stringent data security and device privacy, exploiting local resources to solve device association problem while enforcing data security and device privacy becomes attractive. Fortunately, recently emerging federated learning (FL), a distributed learning paradigm with data protection, provides an effective tool to address this type of issues in mobile networks. In this paper, we propose an efficient device association scheme for RAN slicing by exploiting a hybrid FL reinforcement learning (HDRL) framework, with the aim to improve network throughput while reducing handoff cost. In our proposed framework, individual smart devices train a local machine learning model based on local data and then send the model features to the serving BS/encrypted party for aggregation, so as to efficiently reduce bandwidth consumption for learning while enforcing data privacy. Specifically, we use deep reinforcement learning to train the local model on smart devices under a hybrid FL framework, where horizontal FL is employed for parameter aggregation on BS, while vertical FL is employed for NS/BS pair selection aggregation on the encrypted party. Numerical results show that the proposed HDRL scheme can achieve significant performance gain in terms of network throughput and communication efficiency in comparison with some state-of-the-art solutions.

In this paper, we propose a robust secure transmission scheme for an active reconfigurable intelligent surface (RIS) enabled symbiotic radio (SR) system in the presence of multiple eavesdroppers (Eves). In the considered system, the active RIS is adopted to enable the secure transmission of primary signals from the primary transmitter to multiple primary users in a multicasting manner, and simultaneously achieve its own information delivery to the secondary user by riding over the primary signals. Taking into account the imperfect channel state information (CSI) related with Eves, we formulate the system power consumption minimization problem by optimizing the transmit beamforming and reflection beamforming for the bounded and statistical CSI error models, taking the worst-case SNR constraints and the SNR outage probability constraints at the Eves into considerations, respectively. Specifically, the S-Procedure and the Bernstein-Type Inequality are implemented to approximately transform the worst-case SNR and the SNR outage probability constraints into tractable forms, respectively. After that, the formulated problems can be solved by the proposed alternating optimization (AO) algorithm with the semi-definite relaxation and sequential rank-one constraint relaxation techniques. Numerical results show that the proposed active RIS scheme can reduce up to 27.0% system power consumption compared to the passive RIS., 32 Pages, 12 figures, accepted to IEEE Transactions on Wireless Communications

In conventional dual-function radar-communication (DFRC) systems, the radar and communication channels are routinely estimated at fixed time intervals based on their worst-case operation scenarios. Such situation-agnostic repeated estimations cause significant training overhead and dramatically degrade the system performance, especially for applications with dynamic sensing/communication demands and limited radio resources. In this paper, we leverage the channel aging characteristics to reduce training overhead and to design a situation-dependent channel re-estimation interval optimization-based resource allocation for performance improvement in a multi-target tracking DFRC system. Specifically, we exploit the channel temporal correlation to predict radar and communication channels for reducing the need of training preamble retransmission. Then, we characterize the channel aging effects on the Cramer-Rao lower bounds (CRLBs) for radar tracking performance analysis and achievable rates with maximum ratio transmission (MRT) and zero-forcing (ZF) transmit beamforming for communication performance analysis. In particular, the aged CRLBs and achievable rates are derived as closed-form expressions with respect to the channel aging time, bandwidth, and power. Based on the analyzed results, we optimize these factors to maximize the average total aged achievable rate subject to individual target tracking precision demand, communication rate requirement, and other practical constraints. Since the formulated problem belongs to a non-convex problem, we develop an efficient one-dimensional search based optimization algorithm to obtain its suboptimal solutions. Finally, simulation results are presented to validate the correctness of the derived theoretical results and the effectiveness of the proposed allocation scheme.

Symbiotic radio (SR) has emerged as a spectrum- and energy-efficient paradigm to support massive Internet of Things (IoT) connections. Two multiple access schemes are proposed in this paper to facilitate the massive IoT connections using the cellular network based on the SR technique, namely, the simultaneous access (SA) scheme and the selection diversity access (SDA) scheme. In the SA scheme, the base station (BS) transmits information to the receiver while multiple IoT devices transmit their information simultaneously by passively backscattering the BS signal to the receiver, while in the SDA scheme, only the IoT device with the strongest backscatter link transmits information to the receiver. In both of the schemes, the receiver jointly decodes the information from the BS and the IoT devices. To evaluate the above two schemes, in this paper, we have derived the closed-form expressions of the ergodic rates and the outage probabilities for the cellular and IoT transmissions. Finally, numerical results are provided to verify the theoretical analysis and compare the two proposed multiple access schemes. When the number of IoT devices is small, the SDA scheme is more appealing since it can significantly reduce the computational complexity while achieving equivalent performance to the SA scheme. When the number of IoT devices is large, the SA scheme is preferable since it guarantees a significantly better rate performance and a lower outage probability.

In this paper, we study the handover (HO), and power allocation problem in a two-tier heterogeneous network (HetNet), which consists of a macro base station, and some millimeter-wave (mmWave) small base stations. We establish an HO management, and power allocation scheme to maximize the overall throughput while reducing the HO frequency. In particular, considering the interrelationship among decisions made by different user equipments (UEs), we first model the HO, and power allocation problem as a fully cooperative multi-agent task, in which all agents, i.e., UEs, have the same target. Then, to solve the multi-agent task, and get decentralized policies for each UE, we develop a multi-agent reinforcement learning (MARL) algorithm based on the proximal policy optimization (PPO) method, by introducing the centralized training with decentralized execution framework. That is, we use global information to train policies for each UE, and after the training is finished, each UE obtains a decentralized policy, which can be implemented only based on each UE's local observation. Specially, we introduce the counterfactual baseline to address the credit assignment problem in centralized learning. Due to the centralized training, the decentralized polices learned by multi-agent PPO (MAPPO) can work more cooperatively. Finally, the simulation results demonstrate that our method can achieve better performance comparing with other existing works.

We consider a homogeneous cellular network where a multi-antenna base station (BS) in each cell transmits messages to its intended user over a common frequency band. To improve the system capacity of this multi-cell multi-input single-output (MISO) interference channel, one of the state-of-the-art algorithms, namely, downlink-beamforming coordination, allows all BSs to cooperate with one another to mitigate the effect of inter-cell interference. However, most existing algorithms are suboptimal and impractical in a dynamic wireless environment, due to the high computational complexity and the overhead involved in collecting global channel state information (CSI). In this study, we exploit deep reinforcement learning (DRL) and propose a distributed dynamic downlink-beamforming coordination (DDBC) method with partial observability of the CSI. Each BS is able to train its own deep Q-network and employs appropriate beamformer depending on its environment, which is observed through a designed limited-information exchange protocol. The simulation results show that the proposed DRL-based DDBC method, with a considerably lower system overhead, achieves a system capacity that is very close to that of the fractional programming algorithm with global and instantaneous CSI measurements. In addition, this work demonstrates the potential of utilizing DRL to solve DDBC problems in a more practical manner.

Wireless network optimization has been becoming very challenging as the problem size and complexity increase tremendously, due to close couplings among network entities with heterogeneous service and resource requirements. By continuously interacting with the environment, deep reinforcement learning (DRL) provides a mechanism for different network entities to build knowledge and make autonomous decisions to improve network performance. In this article, we first review typical DRL approaches and recent enhancements. We then discuss the applications of DRL for mobile edge computing (MEC), which can be used for the low-power IoT devices, e.g., wireless sensors in healthcare monitoring, to offload computation workload to nearby MEC servers. To balance power consumption in offloading and computation, we propose a novel hybrid offloading model that exploits the complement operations of RF communications and low-power backscatter communications. The DRL framework is then customized to optimize the transmission scheduling and workload allocation in two communications technologies, which is shown to enhance the offloading performance significantly compared with existing schemes., 15 pages, 6 figures, 15 references

Operating LTE networks in unlicensed bands together with legacy WiFi systems is deemed as a promising technique to support explosively growing mobile traffic. In conventional LTE/WiFi spectrum sharing schemes, LTE systems need to know WiFi traffic demands for optimizing system parameters to protect WiFi systems, for which the two systems are required to cooperate with each other via signallings exchanges. However, it is difficult to establish a dedicated channel among the two independent systems for exchanging signallings. Hence, in this paper, we propose an intelligent duty-cycle medium access control protocol to realize the effective and fair spectrum sharing between LTE and WiFi systems without requiring signalling exchanges. Specifically, we first design a duty-cycle spectrum sharing framework, which allows an LTE system to share the spectrum with a WiFi system by using time sharing. After that, we develop deep reinforcement learning (DRL)-based algorithms to learn WiFi traffic demands by analyzing WiFi channel activity, e.g., the idleness/business of WiFi channels, which can be observed by the LTE system via monitoring WiFi channels. Based on the learnt knowledge, the LTE system can adaptively optimize LTE transmission time to maximize its own throughput and meanwhile to provide sufficient protection to the WiFi system. Simulation results show that, in terms of LTE throughput and WiFi protection, the performance of the proposed intelligent scheme can approach that of the genie-aided exhaustive search algorithm, which needs the perfect knowledge of WiFi traffic demands through massive signalling exchanges and is of high computational complexity.

Since 5G new radio comes with non-standalone (NSA) and standalone (SA) versions in 3GPP, research on 6G has been on schedule by academics and industries. Though 6G is supposed to have much higher capabilities than 5G, yet there is no clear description about what 6G is. In this article, a comprehensive discussion of 6G is given based on the review of 5G developments, covering visions and requirements, technology trends and challenges, aiming at tackling the challenge of coverage, capacity, the user data rate and movement speed of mobile communication system. The vision of 6G is to fully support the development of a Ubiquitous Intelligent Mobile Society with intelligent life and industries. Finally, the roadmap of the 6G standard is suggested for the future.

In this article, a symbiotic radio (SR) system is proposed to support passive Internet of Things (IoT), in which a backscatter device (BD), also called IoT device, is parasitic in a primary transmission. The primary transmitter (PT) is designed to assist both the primary and BD transmissions, and the primary receiver (PR) is used to decode the information from the PT as well as the BD. The symbol period for BD transmission is assumed to be either equal to or much greater than that of the primary one, resulting in parasitic SR (PSR) or commensal SR (CSR) setup. We consider a basic SR system which consists of three nodes: 1) a multiantenna PT; 2) a single-antenna BD; and 3) a single-antenna PR. We first derive the achievable rates for the primary and BD transmissions for each setup. Then, we formulate two transmit beamforming optimization problems, i.e., the weighted sum-rate maximization (WSRM) problem and the transmit power minimization (TPM) problem, and solve these nonconvex problems by applying the semidefinite relaxation (SDR) technique. In addition, a novel transmit beamforming structure is proposed to reduce the computational complexity of the solutions. The simulation results show that for CSR setup, the proposed solution enables the opportunistic transmission for the BD via energy-efficient passive backscattering without any loss in spectral efficiency, by properly exploiting the additional signal path from the BD.

In this paper, we study the resource allocation problem for downlink multicarrier non-orthogonal multiple access systems with short-packet communications (MC-NOMA-SPC). In contrast to long-packet communications in conventional wireless systems, SPC suffers from a transmission rate degradation and an unavoidable decoding error rate. Thus conventional resource allocation based on the Shannon capacity assuming infinite blocklength is no longer optimal. In this paper, we propose to use the effective-throughput as the performance metric to evaluate the tradeoff between the transmission rate and the decoding error rate. Building on that, we jointly optimize the subcarrier assignment, transmission power allocation, and transmission rate adaptation of each user to maximize the total weighted effective-throughput subject to transmission reliability and various practical constraints. Since the formulated problem belongs to a non-convex mixed integer nonlinear programming (MINLP) problem, we develop an efficient algorithm based on the dynamic programming (DP) recursion framework to obtain its optimal solutions. We further propose a low-complexity algorithm based on the principles of block coordinate descent (BCD) and concave-convex procedure (CCCP). Finally, the simulation results show that the proposed low-complexity algorithm can achieve similar performance as that of the optimal solution and outperform the other baseline schemes significantly.

We investigate the interference-aware spectrum reuse for heterogeneous small cell networks (SCNs), by specially considering dense-user deployment and stochastic-environment uncertainties. Most existing approaches, which are lack of evolving coordinations and rely on precise channel state information, tend to be inefficient in the context of dense SCNs with uncertainties. To improve the performance, by introducing a reliable metric of successful transmission probability to characterize the individual utility, we adopt a correlated equilibrium (CE)-based game to formulate spectrum reuse, and propose a distributed regret-matching learning algorithm to achieve the CE solutions. Eliminating the dependence on definite information and with general CE points consideration, our new scheme is feasible under the varying environment and can obtain more promising solutions than the state-of-art reinforcement learning methods by encouraging players to coordinate their strategies. Numerical simulations demonstrate the advantages of our proposed scheme.

This paper presents a literature review on recent applications and design aspects of the intelligent reflecting surface (IRS) in the future wireless networks. Conventionally, the network optimization has been limited to transmission control at two endpoints, i.e., end users and network controller. The fading wireless channel is uncontrollable and becomes one of the main limiting factors for performance improvement. The IRS is composed of a large array of scattering elements, which can be individually configured to generate additional phase shifts to the signal reflections. Hence, it can actively control the signal propagation properties in favor of signal reception, and thus realize the notion of a smart radio environment. As such, the IRS's phase control, combined with the conventional transmission control, can potentially bring performance gain compared to wireless networks without IRS. In this survey, we first introduce basic concepts of the IRS and the realizations of its reconfigurability. Then, we focus on applications of the IRS in wireless communications. We overview different performance metrics and analytical approaches to characterize the performance improvement of IRS-assisted wireless networks. To exploit the performance gain, we discuss the joint optimization of the IRS's phase control and the transceivers' transmission control in different network design problems, e.g.,~rate maximization and power minimization problems. Furthermore, we extend the discussion of IRS-assisted wireless networks to some emerging use cases. Finally, we highlight important practical challenges and future research directions for realizing IRS-assisted wireless networks in beyond 5G communications., 31 pages, 10 figures, 6 tables, 203 references

Recently, classifying the modulation schemes of signals using deep neural network has received much attention. In this paper, we introduce a general model of deep neural network (DNN)-based modulation classifiers for single-input single-output (SISO) systems. Its feasibility is analyzed using maximum a posteriori probability (MAP) criterion and its robustness to uncertain noise conditions is compared to that of the conventional maximum likelihood (ML)-based classifiers. To reduce the design and training cost of DNN classifiers, a simple but effective pre-processing method is introduced and adopted. Furthermore, featuring multiple recurrent neural network (RNN) layers, the DNN modulation classifier is realized. Simulation results show that the proposed RNN-based classifier is robust to the uncertain noise conditions, and the performance of it approaches to that of the ideal ML classifier with perfect channel and noise information. Moreover, with a much lower complexity, it outperforms the existing ML-based classifiers, specifically, expectation maximization (EM) and expectation conditional maximization (ECM) classifiers which iteratively estimate channel and noise parameters. In addition, the proposed classifier is shown to be invariant to the signal distortion such as frequency offset. Furthermore, the adopted pre-processing method is shown to accelerate the training process of our proposed classifier, thus reducing the training cost. Lastly, the computational complexity of our proposed classifier is analyzed and compared to other traditional ones, which further demonstrates its overall advantage.

In this paper, we study time-varying orthogonal frequency division multiplexing (OFDM) systems, and propose a joint channel-and-signal estimation receiver based on turbo message passing (TMP) to efficiently suppress inter-carrier interference (ICI). We establish a factor graph representation of the problem and divide the whole factor graph into two parts, one for channel estimation and the other for signal detection. For the first part, we use Gaussian message passing (GMP) for channel estimation; for the second part, a discrete state space (DSS) model is employed to describe the transition of signal states, and a forward-backward algorithm is adopted for message passing over the transition trellis in signal detection. The resulting algorithm is referred to as DSS-GMP. The complexity of DSS-GMP quickly becomes the bottleneck as the increase of the signal constellation size and the ICI width. To address this issue, we further develop a continuous-state-space (CSS) model based turbo message passing algorithm, where the messages of modulated signals are approximated as continuous Gaussian messages. Numerical results demonstrate that the TMP based scheme significantly outperforms the state-of-the-art schemes.

Publisher Copyright: IEEE Reconfigurable intelligent surface (RIS) is a new and revolutionary technology to achieve spectrum-, energy- and cost-efficient wireless networks. This paper studies the resource allocation for RIS-empowered device-to-device (D2D) communication underlaying a cellular network, in which an RIS is employed to enhance desired signals and suppress interference between paired D2D and cellular links. We maximize the overall network’s spectrum efficiency (SE) and energy efficiency (EE), respectively, by jointly optimizing the spectrum reuse indicators, the transmit power, the RIS’s passive beamforming and the BS’s receive beamforming. To solve both mixed-integer non-linear programming problems, we first propose an efficient and low-complexity user-pairing scheme based on relative channel strength to determine the spectrum reuse indicators. Other variables are then optimized to maximize the SE by an iterative algorithm, based on the techniques of alternating optimization, successive convex approximation,Lagrangian dual transform and quadratic transform. The EE-maximization problem is solved by an alternating algorithm integrated with Dinkelbach’s method. Numerical results show that the proposed design achieves significant SE and EE enhancements compared to traditional underlay D2D network without RIS, relay-assisted D2D network and other benchmarks.

openaire: EC/H2020/813999/EU//WINDMILL We consider machine learning for intra cell beam handovers in mmWave 5GNR systems by leveraging Channel Charting (CC). We develop a base station centric approach for predicting the Signal-to-Noise-Ratio (SNR) of beams. Beam SNRs are predicted based on measured signal at the BS without the need to exchange information with UEs. In an offline training phase, we construct a beam-specific dimensionality reduction of Channel State Information (CSI) to a low-dimensional CC, annotate the CC with beam-wise SNRs and then train SNR predictors for different target beams. In the online phase, we predict target beam SNRs. K-nearest neighbors, Gaussian Process Regression and Neural Network based prediction are considered. Based on SNR difference between the serving and target beams a handover can be decided. To evaluate the efficiency of the proposed framework, we perform simulations for a street segment with synthetically generated CSI. SNR prediction accuracy of average root mean square error less than 0.3 dB is achieved.