Search

Binary metal niobium oxides can offer a higher specific capacity compared to niobium pentoxide (Nb2O5) and thus are ideal anode candidates for lithium ion capacitors (LICs). However, their lower electronic conductivity limits their ability to achieve high energy and power densities. In this paper, one-dimensional (1D) copper niobate (CuNb2O6) nanowires are successfully prepared by electrospinning technology and then immobilized on two-dimensional (2D) reduced graphene oxide (rGO) nanosheets to form a unique 1D nanowire/2D nanosheet CuNb2O6/rGO structure. The 1D/2D CuNb2O6/rGO electrode exhibits a high specific capacity of 312.2 mAh g−1 at 100 mA g−1 as the anode of LICs. The proposed Li+ storage mechanism of the CuNb2O6 anode involves CuNb2O6 decomposition into lithium niobate (Li3NbO4) and copper (Cu) during the initial lithium insertion process. The intercalation-type Li3NbO4 will further serve as the host to Li+ and the inactive Cu phase will act as a conductive network for electron transportation. Furthermore, the energy density of the assembled CuNb2O6/rGO//activated carbon (CuNb2O6/rGO//AC) device could achieve a value as high as 92.1 Wh kg−1 and could thus be considered as a possible alternative electrode material for high energy and power LICs.

Electrocatalytic water splitting used for generating clean and sustainable hydrogen (H2) can be very promising to address current energy shortage and associated environmental issues. However, this methodology is severely impeded by the tardy oxygen evolution reaction (OER). Hence, designing a preferable kinetics and thermodynamics oxidation reaction that supersede OER is very significant for the energy-saving production of H2. Herein, hollow needle-like copper cobalt sulfide was constructed on carbon cloth (CuCo2S4/CC) as a bifunctional electrocatalyst to accelerate H2 generation and simultaneously convert ethanol into value-added acetic acid. Thanks to the synergistic effect and unique structure of Cu and Co, CuCo2S4/CC displays superior catalytic activity and durability in ethanol oxidation reaction (EOR) with a low potential of 1.38 V vs. RHE (@10 mA cm−2). Meanwhile, it exhibits excellent hydrogen evolution reaction (HER) performance. The homemade CuCo2S4/CC//CuCo2S4/CC ethanol–water electrolyser only demands a voltage of 1.59 V to deliver 10 mA cm−2, 150 mV less than that used for ordinary water splitting. This shows that the ethanol–water electrolyser elaborated here holds encouraging potential in the energy-saving production of H2 and oxidation of ethanol into value-added acetic acid. This present work may open the way for the rational design of other electrocatalysts for efficient biomass oxidation reaction and relevant H2 production applications.

A novel three-dimensional (3D) porous nickel-cobalt (Ni-Co) film on nickel foam is successfully prepared and further used as an efficient anode for direct urea-hydrogen peroxide fuel cell (DUHPFC). By varying the cobalt/nickel mole ratios into 0%, 20%, 50%, 80% and 100%, the optimized Ni-Co/Ni foam anode with a ratio of 80% is obtained in terms of the best cell performance among five anodes. Effects of the KOH and urea concentrations, the flow rate and operation temperature on the fuel cell performance are investigated. Results show DUHPFC with the 3D Ni-Co/Ni foam anode exhibits a higher performance than those reported direct urea fuel cells. The cell gives an open circuit voltage of 0.83 V and a peak power density as high as 17.4 and 31.5 mW cm−2 at 20 °C and 70 °C, respectively, when operating on 7.0 mol L−1 KOH and 0.5 mol L−1 urea as the fuel at a flow rate of 15 mL min−1. Besides, when the human urine is directly fed as the fuel, direct urine-hydrogen peroxide fuel cell reaches a maximum power density of 7.5 mW cm−2 with an open circuit voltage of 0.80 V at 20 °C, showing a good application prospect in wastewater treatment.

Nanoporous palladium supported on the carbon coated titanium carbide (C@TiC) nanowire arrays (Pd NP/C@TiC) are successfully prepared by a facile chemical vapor deposition of three-dimensional (3D) C@TiC substrate, followed by electrochemical codeposition of Pd–Ni and removal of Ni via dealloying. The structure and morphology of the obtained Pd NP/C@TiC electrodes are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). Cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) are used to examine the catalytic performances of the electrodes for H2O2 electroreduction in H2SO4 solution. The Pd NP/C@TiC electrode exhibits a largely effective specific surface area owing to its open nanoporous structure allowing the full utilization of Pd surface active sites. At the potential of 0.2 V in 2.0 mol L−1 H2O2 and 2 mol L−1 H2SO4 solutions, the reduction current density reaches 3.47 A mg−1, which is significantly higher than the catalytic activity of H2O2 electroreduction achieved previously with precious metals as catalysts.

A novel three-dimensional carbon- and binder-free nickel nanowire arrays (Ni NAs) electrode is successfully fabricated by a facile galvanostatic electrodeposition method using polycarbonate membrane as the template. The Ni NAs electrode achieves a oxidation current density (divided by the electroactive surface areas of Ni) of 25.1 mA cm −2 in 4 mol L −1 KOH and 0.9 mol L −1 H 2 O 2 at 0.2 V (vs. Ag/AgCl) accompanied with a desirable stability, which is significantly higher than the catalytic activity of H 2 O 2 electro-oxidation achieved previously with precious metals as catalysts. The impressive electrocatalytic performance is largely attributed to the superior 3D open structure and high electronic conductivity, which ensures the high utilization of Ni surfaces and makes the electrode have higher electrochemical activity. The apparent activation energy of H 2 O 2 electro-oxidation on the Ni NAs catalyst is 13.59 kJ mol −1 . A direct peroxide–peroxide fuel cell using the Ni NAs as anode exhibits a peak power density of 48.7 mW cm −2 at 20 °C. The electrode displays a great promise as the anode of direct peroxide–peroxide fuel cell due to its low cost, high activity and stability.

In this paper, freestanding one-dimensional MnO 2 nanoflakes are successful prepared through a simple hydrothermal reaction by using the carbon shell of TiC/C core/shell arrays as the sacrificial template. Its structure and morphology are characterized by X-ray diffractometer, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, energy dispersive X-ray spectrometer and transmission electron microscopy. Results show that the thickness of the carbon shell decreased but also remained and the ultrathin MnO 2 nanoflakes with thickness less than 5 nm uniformly grow on the surfaces of the TiC/C nanowire to form a core/double shell structure after the hydrothermal reaction. The electrochemical performance of the as-prepared electrode is evaluated by cyclic voltammetrys, galvanostatic charging-discharging tests and electrochemical impedance spectroscopy, and high capacities, excellent rate capabilities and exemplary cycling performance is obtained. The as-prepared electrode shows a high specific capacitance of 598.8 F g −1 and 85.8% of its initial capacitance is retained after 10,000 cycles at a high discharge current density of 10 A g −1 , suggesting that this structure has a promising future as high-performance supercapacitor electrode.

A novel Pd/polyaniline/CFC electrode is prepared by electroless deposition of palladium (Pd) onto three-dimensional polyaniline networks. The polyaniline matrix on the carbon fiber cloth (CFC) in the reduction state is electro-synthesized by cyclic voltammetry and has a lower vertex potential of −0.4 V vs. Ag/AgCl. The particle size of the Pd coated on the polyaniline chains is gradiently distributed. The as-prepared Pd/polyaniline/CFC electrode is characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FITR) and X-ray diffraction (XRD). The hydrogen peroxide (H2O2) electro-reduction reaction in H2SO4 solutions on the Pd/polyaniline/CFC electrode is investigated using cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). The results reveal that the electrode exhibited high catalytic activity and excellent stability in the strong oxidizing solution of H2O2 and H2SO4. Polyaniline itself shows electro-catalytic activity towards H2O2 to some extent involving the chemical–electrochemical (C–E) coupling mechanism.

In this article, direct growth of Co3O4 with different morphologies on nickel foam is successfully achieved via a simple hydrothermal method by changing the volume ratio between ethanol and water. The morphology and structure of the as-prepared samples are examined by scanning electron microscopy, transmission electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. The electrochemical performance of the Co3O4 electrodes is investigated as pseudocapacitor material by cyclic voltammetry and galvanostatic charge/discharge test in 3 mol L−1 KOH solution. Results show that the solvent composition plays an important role not only in the morphology but also in the capacitance. Co3O4 with a honeycomb structure obtained from the volume ratio of C2H5OH/H2O = 1 exhibits the highest capacitive performance, 2509.4 F g−1 at 1 A g−1 and 1754 F g−1 at 10 A g−1, which is much larger than that prepared in the pure water and pure ethanol solvent. The electrode also has a satisfactory cycling performance with capacity retention of 74% after 1000 cycles at 10 A g−1. The enhanced electrochemical performance is ascribed to the honeycomb nanostructure allowing facile electrolyte flow which speeds up electrochemical reaction kinetics. These findings may open up the opportunity for optimizing the hydrothermal synthesis conditions to control the morphology and performance of the products.

The electrochemical reduction of dysprosium(III) was studied on W and Cu electrodes in eutectic LiCl–KCl by transient electrochemical methods. Cyclic voltammogram and current reversal chronopotentiogram results demonstrated that dysprosium(III) was directly reduced to dysprosium (0) on the W electrode through a single-step process with the transfer of three electrons. Electrochemical measurements on the Cu electrode showed that different Cu–Dy intermetallics are formed. Moreover, the thermodynamic properties of Cu–Dy intermetallic compounds were estimated by open circuit chronopotentiometry in a temperature range of 773–863 K. Using the linear polarization method, the exchange current density (j0) of dysprosium in eutectic LiCl–KCl on the Cu electrode was estimated, and the temperature dependence of j0 was studied to estimate the activation energies associated with Dy(III)/Cu5Dy and Dy(III)/Cu9/2Dy couples. In addition, potentiostatic electrolysis was conducted to extract dysprosium on the Cu electrode, and five Cu–Dy intermetallic compounds, CuDy, Cu2Dy, Cu9/2Dy, Cu5Dy and Cu0.99Dy0.01 were identified by X-ray diffraction, scanning electron microscopy and energy dispersive spectrometry. Meanwhile, the change of dysprosium(III) concentration was monitored using inductively coupled plasma-atomic emission spectrometry, and the maximum extraction efficiency of dysprosium was found to reach 99.2%.

CuO nanosheet arrays freely standing on nickel foam are prepared via a template-free growth method. The morphology of CuO nanosheet arrays is examined by scanning and transmission electron microscopy and the phase structure of nanosheets is analyzed by X-ray diffraction spectroscopy. The supercapacitance of CuO nanosheet arrays is investigated by cyclic voltammetry, galvanostatic charge/discharge test and electrochemical impedance spectroscopy. The results show that the array of CuO nanosheets forms a uniform film of around 5 μm in thickness on nickel foam skeleton. The film is composed of clusters of arrays of nanosheets with a thickness up to around 150 nm. The CuO nanosheet arrays exhibit a specific capacitance of 569 F g−1 at a current density of 5 mA cm−2 in 6.0 mol dm−3 KOH electrolyte. The capacitance loss is less than 17.5% after 500 charge/discharge cycles at 10 mA cm−2 and with columbic efficiency higher than 93%.

Acetone is the main product of 2-propanol electrooxidation in both acid and alkaline electrolytes; it always co-exists with 2-propanol in the reaction solution due to its liquid nature. Whether acetone will affect the electrooxidation of 2-propanol has not been well documented, which is a key issue that needs to be addressed for the direct 2-propanol fuel cell. In this study, the influence of acetone on the electrooxidation of 2-propanol in alkaline medium is investigated, using state-of-the-art Pd electrode, by cyclic voltammetry and chronoamperometry. The electrode is prepared using a chemical replacement method, by dipping nickel foam into acidified PdCl2 solution, and characterized by scanning electron microscopy. We found that the presence of acetone adversely affects electrooxidation performance of 2-propanol and substantially reduces the oxidation current of 2-propanol on Pd in alkaline medium. The acetone poisoning effect is interpreted by a competitive adsorption mechanism, in which acetone adsorbs onto Pd surface and occupies the active sites for 2-propanol electrooxidation, leading to a significant decrease in the number of these sites for 2-propanol electrooxidation. The results of this study point out that efficient electrocatalysts for 2-propanol electrooxidation in alkaline electrolytes must be non-adsorptive to acetone besides being highly active to 2-propanol oxidation.