Search

The possibility of exfoliating graphite into graphene sheets allows the researchers to produce a material, termed "graphene paper" (G-paper), conductive as graphite but more flexible and processable. G-paper is already used for electronic applications, like conductors, antennas, and heaters, outperforming metal conductors thanks to its high flexibility, lightness, chemical stability, and compatibility with polymeric substrates. Here, the effectiveness in the use of G-paper for the realization of electrodes on flexible plastic substrates and textiles, and their applicability as amperometric sensors are demonstrated. The performance of these devices is compared with commercial platforms made of carbon-based inks, finding that they outperform commercial devices in sensing nicotinamide adenine dinucleotide (NADH), a key molecule for enzymatic biosensing; the electrodes can achieve state-of-the-art sensitivity (107.2 ?A mm cm) and limit of detection (0.6 × 10 m) with no need of additional functionalization. Thanks to this property, the stable deposition of a suitable enzyme, namely lactate dehydrogenase, on the electrode surface is used as a proof of concept of the applicability of this new platform for the realization of a biosensor. The possibility of having a single material suitable for antennas, electronics, and now sensing opens new opportunities for smart fabrics in wearable electronic applications.

Research into electrochemical biosensors represents a significant portion of the large interdisciplinary field of biosensing. The drive to develop reliable, sensitive, and selective biosensing platforms for key environmental and medical biomarkers is ever expanding due to the current climate. This push for the detection of vital biomarkers at lower concentrations, with increased reliability, has necessitated the utilisation of micro- and nano-dimensional materials. There is a wide variety of nanomaterials available for exploration, all having unique sets of properties that help to enhance the performance of biosensors. In recent years, a large portion of research has focussed on combining these different materials to utilise the different properties in one sensor platform. This research has allowed biosensors to reach new levels of sensitivity, but we note that there is room for improvement in the reporting of this field. Numerous examples are published that report improvements in the biosensor performance through the mixing of multiple materials, but there is little discussion presented on why each nanomaterial is chosen and whether they synergise well together to warrant the inherent increase in production time and cost. Research into micro-nano materials is vital for the continued development of improved biosensing platforms, and further exploration into understanding their individual and synergistic properties will continue to push the area forward. It will continue to provide solutions for the global sensing requirements through the development of novel materials with beneficial properties, improved incorporation strategies for the materials, the combination of synergetic materials, and the reduction in cost of production of these nanomaterials. Graphical abstract

WOS: 000461536400006, 30721835, The detection of water soluble vitamins using electrochemical method is widely established in pharmaceutical quality control laboratories, and especially the recent advances in hybrid heterostrucure nanomaterials has devoted to enhance the significant analytical parameters like sensitivity, selectivity and fast response time. Herein, we report the synthesis of a hybrid heterostructure comprising SnO2 nanopartides supported mesoporous TiO2, and the obtained nanocomposite were fabricated over glassy carbon electrode (GCE) for the electrochemical oxidation of vitamin B-6 in pharmaceutical tablets. The designed SnO2-TiO2/GC modified electrode exhibits well-defined oxidation peak with lowering over-potential and larger signal response compared to the pristine counterparts, and it is mainly due to the formation of abundant active surface layer offered by SnO2 cocatalyst, and thus significantly enhances the electrochemical surface area. Differential pulse voltammetry (DPV) measurements revealed a sharp increase in the anodic peak current upon addition of increasing concentration of vitamin B-6. The analytical performance of the modified electrode displayed a wide linear range (0.1-31.4 mu M), high selectivity, and excellent sensitivity (759.73 mu A mM(-1) cm(-2)) with low detection limit (35 nM). Thus, the resultant mesoporous hybrid nanocatalyst provides an efficient electrochemical platform for determination of various potential analytes. (C) 2019 Elsevier Inc. All rights reserved., CONICYT, Government of Chile [CONICYT/FONDAP/15110019]; FONDECYT Government of Chile [11170414], The authors (S.R., F.G.) acknowledge the support of CONICYT, Government of Chile through the project CONICYT/FONDAP/15110019. The author (S.R) acknowledge FONDECYT Government of Chile (Project No.: 11170414), for the support to carry out this project.

In this study, the electropolymerization of 4-hydroxyphenylacetic acid (4-HPA) over graphite electrodes (GE) was optimized, aiming its application as a functionalized electrochemical platform for oligonucleotides immobilization. It was investigated for the number of potential cycles and the scan rate influence on the monomer electropolymerization by using cyclic voltammetry technique. It was observed that the polymeric film showed a redox response in the region of +0.53/+0.38 V and the increase in the number of cycles produces more electroactive platforms because of the better electrode coverage. On the other hand, the decrease of scan rate produces more electroactive platforms because of the occurrence of more organized coupling. Scanning electron microscopy (SEM) images showed that the number of potential cycles influences the coverage and morphology of the electrodeposited polymeric film. However, the images also showed that at different scan rates a more organized material was produced. The influence of these optimized polymerization parameters was evaluated both in the immobilization of specific oligonucleotides and in the detection of hybridization with complementary target. Poly(4-HPA)/GE platform has shown efficient and sensitive for oligonucleotides immobilization, as well as for a hybridization event with the complementary oligonucleotide in all investigated cases. The electrode was modified with 100 cycles at 75 mV/s presented the best responses in function of the amplitude at the monitored peak current values for the Methylene Blue and Ethidium Bromide intercalators. The construction of the genosensor to detect a specific oligonucleotide sequence for the Mycobacterium tuberculosis bacillus confirmed the results regarding the poly(4-HPA)/GE platform efficiency since it showed excellent sensitivity. The limit of detection and the limit of quantification was found to be 0.56 (&plusmn, 0.05) &mu, M and 8.6 (&plusmn, 0.7) &mu, M, respectively operating with very low solution volumes (15 &micro, L of probe and 10 &micro, L target). The biosensor development was possible with optimization of the probe adsorption parameters and target hybridization, which led to an improvement in the decrease of the Methylene Blue (MB) reduction signal from 14% to 34%. In addition, interference studies showed that the genosensor has satisfactory selectivity since the hybridization with a non-specific probe resulted in a signal decrease (46% lower) when compared to the specific target.