Search

The radio spectrum is a scarce and extremely valuable resource that demands careful real-time monitoring and dynamic resource allocation. Dynamic spectrum access (DSA) is a new paradigm for managing the radio spectrum, which requires AI/ML-driven algorithms for optimum performance under rapidly changing channel conditions and possible cyber-attacks in the electromagnetic domain. Fast sensing across multiple directions using array processors, with subsequent AI/ML-based algorithms for the sensing and perception of waveforms that are measured from the environment is critical for providing decision support in DSA. As part of directional and wideband spectrum perception, the ability to finely channelize wideband inputs using efficient Fourier analysis is much needed. However, a fine-grain fast Fourier transform (FFT) across a large number of directions is computationally intensive and leads to a high chip area and power consumption. We address this issue by exploiting the recently proposed approximate discrete Fourier transform (ADFT), which has its own sparse factorization for real-time implementation at a low complexity and power consumption. The ADFT is used to create a wideband multibeam RF digital beamformer and temporal spectrum-based attention unit that monitors 32 discrete directions across 32 sub-bands in real-time using a multiplierless algorithm with low computational complexity. The output of this spectral attention unit is applied as a decision variable to an intelligent receiver that adapts its center frequency and frequency resolution via FFT channelizers that are custom-built for real-time monitoring at high resolution. This two-step process allows the fine-gain FFT to be applied only to directions and bands of interest as determined by the ADFT-based low-complexity 2D spacetime attention unit. The fine-grain FFT provides a spectral signature that can find future use cases in neural network engines for achieving modulation recognition, IoT device identification, and RFI identification. Beamforming and spectral channelization algorithms, a digital computer architecture, and early prototypes using a 32-element fully digital multichannel receiver and field programmable gate array (FPGA)-based high-speed software-defined radio (SDR) are presented. [ABSTRACT FROM AUTHOR]

The radio spectrum is a scarce and extremely valuable resource that demands careful real-time monitoring and dynamic resource allocation. Dynamic spectrum access (DSA) is a new paradigm for managing the radio spectrum, which requires AI/ML-driven algorithms for optimum performance under rapidly changing channel conditions and possible cyber-attacks in the electromagnetic domain. Fast sensing across multiple directions using array processors, with subsequent AI/ML-based algorithms for the sensing and perception of waveforms that are measured from the environment is critical for providing decision support in DSA. As part of directional and wideband spectrum perception, the ability to finely channelize wideband inputs using efficient Fourier analysis is much needed. However, a fine-grain fast Fourier transform (FFT) across a large number of directions is computationally intensive and leads to a high chip area and power consumption. We address this issue by exploiting the recently proposed approximate discrete Fourier transform (ADFT), which has its own sparse factorization for real-time implementation at a low complexity and power consumption. The ADFT is used to create a wideband multibeam RF digital beamformer and temporal spectrum-based attention unit that monitors 32 discrete directions across 32 sub-bands in real-time using a multiplierless algorithm with low computational complexity. The output of this spectral attention unit is applied as a decision variable to an intelligent receiver that adapts its center frequency and frequency resolution via FFT channelizers that are custom-built for real-time monitoring at high resolution. This two-step process allows the fine-gain FFT to be applied only to directions and bands of interest as determined by the ADFT-based low-complexity 2D spacetime attention unit. The fine-grain FFT provides a spectral signature that can find future use cases in neural network engines for achieving modulation recognition, IoT device identification, and RFI identification. Beamforming and spectral channelization algorithms, a digital computer architecture, and early prototypes using a 32-element fully digital multichannel receiver and field programmable gate array (FPGA)-based high-speed software-defined radio (SDR) are presented.

Multi-user spatial modulation (SM) assisted by sparse code multiple access (SCMA) has been recently proposed to provide uplink high spectral efficiency transmission. The message passing algorithm (MPA) is employed to detect the transmitted signals, which suffers from high complexity. This paper proposes three low-complexity algorithms for the first time to the SM-SCMA. The first algorithm is referred to as successive user detection (SUD), while the second algorithm is the modified version of SUD, namely modified SUD (MSUD). Then, for the first time, the tree-search of the SM-SCMA is constructed. Based on that tree-search, another variant of the sphere decoder (SD) is proposed for the SM-SCMA, referred to as fixed-complexity SD (FCSD). SUD provides a benchmark for decoding complexity at the expense of bit-error-rate (BER) performance. Further, MSUD slightly increases the complexity of SUD with a significant improvement in BER performance. Finally, FCSD provides a near-optimum BER with a considerable reduction of the complexity compared to the MPA decoder and also supports parallel hardware implementation. The proposed algorithms provide flexible design choices for practical implementation based on system design demands. The complexity analysis and Monte-Carlo simulations of the BER are provided for the proposed algorithms. [ABSTRACT FROM AUTHOR]

An $N$ -element array with receivers subject to an $N$ -point spatial fast Fourier transform (FFT) leads to $N$ directionally orthogonal radio frequency (RF) beams. FFTs are fast algorithms for computing the $N$ -point discrete Fourier transform (DFT) at reduced complexity. The brute-force computation of a DFT requires $\mathcal {O}(N^{2})$ multiplications while an FFT provides the same computation at $\mathcal {O}(N \log N)$ multiplications. The digital chip area and power consumption of the DFT computation are still dominated by the multipliers required by the FFT used. In this paper, an approximation to the 16-point DFT is proposed which maintains mathematical properties close to the ideal 16-point DFT to obtain 16 RF beams by computing an approximate spatial DFT in every clock cycle at significantly lower area and power in the digital realization. The proposed approximation can be implemented using FFT-like fast algorithms that are multiplierless, thereby further reducing the digital chip area and power consumption associated with multiplication in a conventional FFT approach to zero. A 16-beam beamformer employing a 16-element linear array of patch antennas, direct-conversion receivers, and a Xilinx Virtex-6 field-programmable gate array-based real-time digital back-end clocked at 240 MHz are described as an example realization of 16 complex-valued (IQ) receive-mode RF beams, centered at 2.4 GHz with 120 MHz of bandwidth per beam. [ABSTRACT FROM AUTHOR]