Search

Aims: While cementless fixation offers potential advantages over cemented fixation, such as a shorter operating time, concerns linger over its higher cost and increased risk of periprosthetic fractures. If the risk of fracture can be forecasted, it would aid the shared decision-making process related to cementless stems. Our study aimed to develop and validate predictive models of periprosthetic femoral fracture (PPFF) necessitating revision and reoperation after elective total hip arthroplasty (THA). Methods: We included 154,519 primary elective THAs from the Swedish Arthroplasty Register (SAR), encompassing 21 patient-, surgical-, and implant-specific features, for model derivation and validation in predicting 30-day, 60-day, 90-day, and one-year revision and reoperation due to PPFF. Model performance was tested using the area under the curve (AUC), and feature importance was identified in the best-performing algorithm. Results: The Lasso regression excelled in predicting 30-day revisions (area under the receiver operating characteristic curve (AUC) = 0.85), while the Gradient Boosting Machine (GBM) model outperformed other models by a slight margin for all remaining endpoints (AUC range: 0.79 to 0.86). Predictive factors for revision and reoperation were identified, with patient features such as increasing age, higher American Society of Anesthesiologists grade (> III), and World Health Organization obesity classes II to III associated with elevated risks. A preoperative diagnosis of idiopathic necrosis increased revision risk. Concerning implant design, factors such as cementless femoral fixation, reverse-hybrid fixation, hip resurfacing, and small (< 35 mm) or large (> 52 mm) femoral heads increased both revision and reoperation risks. Conclusion: This is the first study to develop machine-learning models to forecast the risk of PPFF necessitating secondary surgery. Future studies are required to externally validate our algorithm and assess its applicability in clinical practice. Cite this article: Bone Joint Res 2025;14(1):46–57.

Purpose: Periprosthetic (PPFF) and peri‐implant femoral fractures (PIFFs) are troublesome complications of prosthetic and implant surgery, the prior being described to have a greater delay to surgery when compared with standard hip fractures. The implications of PPFF delay being disputed in the current literature and those of PIFF have not been investigated. The aim of this study was to determine whether the time from radiological examination to surgery differs between hip fractures and PPFF/PIFF, and the possible consequences of delay and group affiliation on morbidity, mortality, and readmissions. Methods: One hundred and thirty‐six participants were admitted to Danderyd hospital during 2020, cases exposed to PPFF or PIFF (n = 35) and hip fracture controls (n = 101) matched at 1:3 with respect to age and sex. Timestamps from radiology, surgery, and death were retrieved from the Swedish fracture registry, data on adverse events (AEs), and readmissions were collected through retrospective medical record review for 90‐days postsurgery. Results: Linear regression showed that time to surgery differed in case and control cohorts by a mean of 24.8 h, p < 0.001, and AEs were significantly more common in cases, p = 0.046. Unadjusted binary logistic regression indicated a possible relationship between time to surgery increasing the rate of AEs by 1.3% per hour of delay, 95% confidence interval [CI]: (1–1.03). Conclusion: This study reveals a significant delay in surgery for PPFFs and PIFFs compared with standard hip fractures, leading to higher adverse event rates. While mortality and readmissions did not differ significantly, the delay underscores the need for timely intervention in these complex cases. Further research is needed to address these challenges and improve patient outcomes. Level of Evidence: III [ABSTRACT FROM AUTHOR]

Abstract Purpose Periprosthetic (PPFF) and peri‐implant femoral fractures (PIFFs) are troublesome complications of prosthetic and implant surgery, the prior being described to have a greater delay to surgery when compared with standard hip fractures. The implications of PPFF delay being disputed in the current literature and those of PIFF have not been investigated. The aim of this study was to determine whether the time from radiological examination to surgery differs between hip fractures and PPFF/PIFF, and the possible consequences of delay and group affiliation on morbidity, mortality, and readmissions. Methods One hundred and thirty‐six participants were admitted to Danderyd hospital during 2020, cases exposed to PPFF or PIFF (n = 35) and hip fracture controls (n = 101) matched at 1:3 with respect to age and sex. Timestamps from radiology, surgery, and death were retrieved from the Swedish fracture registry, data on adverse events (AEs), and readmissions were collected through retrospective medical record review for 90‐days postsurgery. Results Linear regression showed that time to surgery differed in case and control cohorts by a mean of 24.8 h, p

Abstract Background Femoral offset (FO) restoration plays an important role in improving the prognosis and quality of life of patients undergoing hip replacement. However, it is not given enough attention in revisions among patients with periprosthetic femoral fractures (PPFFs); instead, more attention is given to reduction, fixation of fractures and stabilizing prostheses. The primary objective of this study was to evaluate the effect of FO restoration on the function of the hip joint in revisions of patients with PPFF of Vancouver B2. Moreover, we studied whether there is a difference in FO restoration between modular and nonmodular stems. Methods A retrospective review of 20 patients with PPFF of Vancouver B2 revised with a tapered fluted modular titanium stem and 22 patients with PPFF of Vancouver B2 revised with a tapered fluted nonmodular titanium stem from 2016 to 2021 was conducted. Based on the difference between the FO of the affected side and that of the healthy side, 26 patients were allocated into Group A (difference ≤ 4 mm), and 16 patients were allocated into Group B (difference > 4 mm). The postoperative Harris Hip Score (HHS), range of motion of the hip joint, length of both lower limbs and dislocation were compared between Group A and Group B. The proportions of patients with FO restoration (difference ≤ 4 mm) and stem subsidence were compared between the modular and nonmodular groups. Results The mean follow-up time was 34.3 ± 17.3 months, and all cases achieved fracture healing at the last visit. Patients in Group A had a higher HHS, larger range of abduction, fewer dislocations and less limb length discrepancy (LLD). Patients in the modular group had a higher proportion of FO restoration and less subsidence. Conclusion FO restoration improves postoperative hip joint function and reduces dislocation and LLD in revisions of patients with PPFF of Vancouver B2. Compared with nonmodular prostheses, modular prostheses tend to be easier for FO restoration under complex circumstances.

Objectives: As currently there is no existing biomechanical work on the topic of interest, the aim of the current study was to investigate the effect of cerclage banding distally to an intraoperatively occurring proximal periprosthetic femoral clamshell fracture versus a non-fractured femur after total hip arthroplasty. Methods: A diaphyseal anchoring stem was implanted in twenty paired human cadaveric femora, assigned to a treatment and a control group. In the treatment group, each specimen was fitted with a cerclage band placed 3 mm distally to a clamshell fracture, created with an extent of 40% of the anchoring length of the stem. The resulting fragment was not treated further. The contralateral specimens were left with the stems without further fracture creation or treatment. All constructs were tested under progressively increasing cyclic axial loading until failure. Relative bone-implant movements were monitored by motion tracking. Results: Number of cycles and the corresponding load at stem loosening, defined as 1 mm displacement of the stem along the shaft axis, were 31,417 ± 8870 and 3641.7 ± 887 N in the control group, and 26,944 ± 11,706 and 3194.4 ± 1170.6 N in the treatment group, respectively, with no significant differences between them, p = 0.106. Conclusion: From a biomechanical perspective, cerclage banding distally to an intraoperative clamshell fracture with an extent of 40% of the anchoring length of the stem demonstrated comparable resistance against hip stem loosening versus a non-fractured femur. It may therefore represent a valid treatment option to restore the full axial stability of a diaphyseal anchoring stem. In addition, it may be considered to keep the medial wall fragment unfixed, thus saving operative time and minimizing associated risks. [ABSTRACT FROM AUTHOR]

Aims: The aim of this study was to describe services available to patients with periprosthetic femoral fracture (PPFF) in England and Wales, with focus on variation between centres and areas for care improvement. Methods: This work used data freely available from the National Hip Fracture Database (NHFD) facilities survey in 2021, which asked 21 questions about the care of patients with PPFFs, and nine relating to clinical decision-making around a hypothetical case. Results: Of 174 centres contributing data to the NHFD, 161 provided full responses and 139 submitted data on PPFF. Lack of resources was cited as the main reason for not submitting data. Surgeon (44.6%) and theatre (29.7%) availability were reported as the primary reasons for surgical delay beyond 36 hours. Less than half had a formal process for a specialist surgeon to operate on PPFF at least every other day. The median number of specialist surgeons at each centre was four (interquartile range (IQR) 3 to 6) for PPFF around both hips and knees. Around one-third of centres reported having one dedicated theatre list per week. The routine discussion of patients with PPFF at local and regional multidisciplinary team meetings was lower than that for all-cause revision arthroplasties. Six centres reported transferring all patients with PPFF around a hip joint to another centre for surgery, and this was an occasional practice for a further 34. The management of the hypothetical clinical scenario was varied, with 75 centres proposing ORIF, 35 suggested revision surgery and 48 proposed a combination of both revision and fixation. Conclusion: There is considerable variation in both the organization of PPFF services England and Wales, and in the approach taken to an individual case. The rising incidence of PPFF and complexity of these patients highlight the need for pathway development. The adoption of networks may reduce variability and improve outcomes for patients with PPFF. Cite this article: Bone Jt Open 2023;4(5):378–384.

AimsThe objectives of this study were to investigate the patient characteristics and mortality of Vancouver type B periprosthetic femoral fractures (PFF) subgroups divided into two groups according to femoral component stability and to compare postoperative clinical outcomes according to treatment in Vancouver type B2 and B3 fractures.MethodsA total of 126 Vancouver type B fractures were analyzed from 2010 to 2019 in 11 associated centres' database (named TRON). We divided the patients into two Vancouver type B subtypes according to implant stability. Patient demographics and functional scores were assessed in the Vancouver type B subtypes. We estimated the mortality according to various patient characteristics and clinical outcomes between the open reduction internal fixation (ORIF) and revision arthroplasty (revision) groups in patients with unstable subtype.ResultsThe one-year mortality rate of the stable and unstable subtype of Vancouver type B was 9.4% and 16.4%. Patient demographic factors, including residential status and pre-injury mobility were associated with mortality. There was no significant difference in mortality between patients treated with ORIF and Revision in either Vancouver B subtype. Patients treated with revision had significantly higher Parker Mobility Score (PMS) values (5.48 vs 3.43; p = 0.00461) and a significantly lower visual analogue scale (VAS) values (1.06 vs 1.94; p = 0.0399) for pain than ORIF in the unstable subtype.ConclusionAmong patients with Vancouver type B fractures, frail patients, such as those with worse scores for residential status and pre-injury mobility, had a high mortality rate. There was no significant difference in mortality between patients treated with ORIF and those treated with revision. However, in the unstable subtype, the PMS and VAS values at the final follow-up examination were significantly better in patients who received revision. Based on postoperative activities of daily life, we therefore recommend evision in instances when either treatment option is feasible.Cite this article: Bone Jt Open 2023;4(1):38–46.

Background: Femoral offset (FO) restoration plays an important role in improving the prognosis and quality of life of patients undergoing hip replacement. However, it is not given enough attention in revisions among patients with periprosthetic femoral fractures (PPFFs); instead, more attention is given to reduction, fixation of fractures and stabilizing prostheses. The primary objective of this study was to evaluate the effect of FO restoration on the function of the hip joint in revisions of patients with PPFF of Vancouver B2. Moreover, we studied whether there is a difference in FO restoration between modular and nonmodular stems. Methods: A retrospective review of 20 patients with PPFF of Vancouver B2 revised with a tapered fluted modular titanium stem and 22 patients with PPFF of Vancouver B2 revised with a tapered fluted nonmodular titanium stem from 2016 to 2021 was conducted. Based on the difference between the FO of the affected side and that of the healthy side, 26 patients were allocated into Group A (difference ≤ 4 mm), and 16 patients were allocated into Group B (difference > 4 mm). The postoperative Harris Hip Score (HHS), range of motion of the hip joint, length of both lower limbs and dislocation were compared between Group A and Group B. The proportions of patients with FO restoration (difference ≤ 4 mm) and stem subsidence were compared between the modular and nonmodular groups. Results: The mean follow-up time was 34.3 ± 17.3 months, and all cases achieved fracture healing at the last visit. Patients in Group A had a higher HHS, larger range of abduction, fewer dislocations and less limb length discrepancy (LLD). Patients in the modular group had a higher proportion of FO restoration and less subsidence. Conclusion: FO restoration improves postoperative hip joint function and reduces dislocation and LLD in revisions of patients with PPFF of Vancouver B2. Compared with nonmodular prostheses, modular prostheses tend to be easier for FO restoration under complex circumstances. [ABSTRACT FROM AUTHOR]

Cemented polished tapered femoral stems (PTS) made of cobalt–chrome alloy (CoCr) are a known risk factor for periprosthetic fracture (PPF). The mechanical differences between CoCr-PTS and stainless-steel (SUS) PTS were investigated. CoCr stems having the same shape and surface roughness as the SUS Exeter® stem were manufactured and dynamic loading tests were performed on three each. Stem subsidence and the compressive force at the bone–cement interface were recorded. Tantalum balls were injected into the cement, and their movement was tracked to indicate cement movement. Stem motions in the cement were greater for the CoCr stems than for the SUS stems. In addition, although we found a significant positive correlation between stem subsidence and compressive force in all stems, CoCr stems generated a compressive force over three times higher than SUS stems at the bone–cement interface with the same stem subsidence (p < 0.01). The final stem subsidence amount and final force were greater in the CoCr group (p < 0.01), and the ratio of tantalum ball vertical distance to stem subsidence was significantly smaller for CoCr than for SUS (p < 0.01). CoCr stems appear to move more easily in cement than SUS stems, which might contribute to the increased occurrence of PPF with the use of CoCr-PTS. [ABSTRACT FROM AUTHOR]

Aims: Periprosthetic hip fractures (PPFs) after total hip arthroplasty are difficult to treat. Therefore, it is important to identify modifiable risk factors such as stem selection to reduce the occurrence of PPFs. This study aimed to clarify differences in fracture torque, surface strain, and fracture type analysis between three different types of cemented stems. Methods: We conducted biomechanical testing of bone analogues using six cemented stems of three different types: collarless polished tapered (CPT) stem, Versys Advocate (Versys) stem, and Charnley-Marcel-Kerboull (CMK) stem. Experienced surgeons implanted each of these types of stems into six bone analogues, and the analogues were compressed and internally rotated until failure. Torque to fracture and fracture type were recorded. We also measured surface strain distribution using triaxial rosettes. Results: There was a significant difference in fracture torque between the three stem types (p = 0.036). Particularly, the median fracture torque for the CPT stem was significantly lower than that for the CMK stem (CPT vs CMK: 164.5 Nm vs 200.5 Nm; p = 0.046). The strain values for the CPT stem were higher than those for the other two stems at the most proximal site. The fracture pattern of the CPT and Versys stems was Vancouver type B, whereas that of the CMK stem was type C. Conclusion: Our study suggested that the cobalt-chromium alloy material, polished surface finish, acute-square proximal form, and the absence of a collar may be associated with lower fracture torque, which may be related to PPF. Cite this article: Bone Joint Res 2022;11(5):270–277.

Objectives To determine the potential risk factors for intraoperative periprosthetic femoral fractures in patients with developmental dysplasia of the hip (DDH) undergoing total hip arthroplasty (THA). Methods This was a retrospective study. Patients who were diagnosed with DDH and undergoing THA (by artificial joint replacement) at our hospital from January 1999 to December 2019 were included in this study. Clinical and radiological factors were obtained from their medical records, such as age, sex, Crowe classification, morphological features of proximal femur, and features of surgical procedure. The outcome of interest was the occurrence of intraoperative periprosthetic femoral fracture, which was recorded and classified according to the Vancouver classification system. According to the fracture status, the patients were divided into two groups: the fracture group and the non‐fracture group. Multivariate logistic regression model was built to identify the risk factors for these fractures. Results A total of 1252 hips were finally included. Intraoperative periprosthetic femoral fractures were identified in 62 hips. The incidence of intraoperative periprosthetic femoral fractures in patients with DDH undergoing THA was 4.95%. There were 22 patients (proportion = 35.48%, incidence = 1.76%) with Type A fractures, 38 (proportion = 61.29%, incidence = 3.04%) with Type B fractures, and two (proportion = 3.23%, incidence = 0.16%) with Type C fractures. Six independent risk factors for intraoperative periprosthetic femoral fractures were identified: osteoporosis (OR = 3.434; 95% CI, 1.963–6.007), previous surgical history (OR = 4.797; 95% CI, 2.446–9.410), Dorr Type A canal (OR = 3.025; 95% CI, 1.594–5.738), retained femoral neck length (OR = 1.121; 95% CI, 1.043–1.204), implanted metaphyseal‐diaphyseal fixation stems (OR = 3.208; 95% CI, 1.562–6.591), and implanted stem with anteversion design (OR = 2.916; 95% CI, 1.473–5.770). Conclusions The overall incidence of intraoperative periprosthetic femoral fractures in patients with DDH undergoing THA was 4.95%, which was at a moderate level compared to patients with other diseases undergoing THA. Six independent risk factors were identified: osteoporosis, previous surgical history, Dorr Type A canal, insufficient neck osteotomy level, implantation of metaphyseal‐diaphyseal fixation stem, and implantation of a stem with an anteversion design. Comprehending these risk factors might help surgeons prevent the occurrence of these intraoperative periprosthetic femoral fractures in patients with DDH.

Periprosthetic femoral fractures are a serious complication after total hip arthroplasty. The Vancouver classification divides fractures on location, implant stability and residual bone stock. The treatment of Vancouver B fractures is surgical and the first decision point surrounds whether or not the stem is well-fixed: well-fixed stems require Open Reduction and Internal Fixation, whereas loose stems require revision arthroplasty. Vancouver B1 fractures are treated with ORIF and had a poorer out¬come when compared with B2 and B3 fractures because some B1 fractures were, in reality, probably B2 fractures. In Vancouver B2 and B3 fractures, the stem is loose and the revision of implant is mandatory. Controversy remains around the indications to perform ORIF or revision for Vancouver B fracture. In the future, it could be useful to combine infor¬mation from both the radiographs and the medical records in order to be able to more correctly evaluate the type of fracture and its treatment.

Abstract Background The incidence of fractures around the femoral prosthesis among patients undergoing hip arthroplasty is increasing and has become the third leading cause of hip revision. While numerous methods for the surgical treatment of periprosthetic femoral fractures (PFFs) have been proposed, only few reports have examined the long-term efficacy of surgical treatment. This study aims to examine the mid-and long-term efficacy of surgical treatment among patients with Vancouver B2 and B3 PFFs. Methods This retrospective study evaluated the surgical outcomes of patients with Vancouver B2 and B3 PFFs between 2007 and 2011. The minimum follow-up time was eight years. Fracture healing, prosthesis stability, complications, patient quality of life SF-36 score, and survival rate were evaluated during the follow-up assessments. Results A total of 83 patients were included and had an average follow-up period of 120.3 months. Among these patients, 69 were classified as Vancouver B2 and were treated with a distal fixation stem, whereas 14 cases were classified as Vancouver B3 and were treated with modular femoral prosthesis by using a proximal femoral allograft technique. A total of 15 patients underwent secondary revision surgery, and prosthesis dislocation was identified as the main cause of secondary revision. 80 (96.4%) cases of fractures were clinically healed. The mortality rate in the first year after surgery was 8.4% (7/83). The overall 5-year Kaplan–Meier survival rate for these patients was 75.9%. Meanwhile, the 5-year Kaplan–Meier survival rate for the implants was 86.9%. The final follow-up SF-36 score of the patients was 48.3 ± 9.8. Conclusions Patients with Vancouver B2 and B3 PFFs show high mortality in the first year after their surgery, and the Kaplan–Meier analysis results showed that such mortality tends to plateau after 5 years. Prosthesis dislocation was identified as the primary cause of secondary revision.

Introduction: Periprosthetic fractures of the femur are an increasing problem in today's trauma and orthopaedic surgery. Owing to the hip stem, implant anchorage is very difficult in the proximal femur. This study compares two plate systems regarding their biomechanical properties and the handling in periprosthetic fracture fixation of the proximal femur. Materials and methods: Using eight pairs of fresh, frozen human proximal femora the Locking Compression Plate/Locking Attachment Plate construct (LCP/LAP) (group I, DePuy Synthes) was compared to the new LOQTEQ® periprosthetic distal lateral femur plate (group II, AAP Implantate AG). After implantation of press fit femoral hip stems a Vancouver B1 fracture model was used. Biomechanical testing was performed by cyclic axial loading with a constant increment of 0.1 N/cycle starting from 750 N axial loading. Every 250 cycles an a.p. x-ray was done to evaluate failure. Results: The Group II showed significant higher axial stiffness (+42%) compared with Group I. In addition, Group II withstood significantly more load-cycles until failure (20%). The mode of catastrophic failure was plate breakage in Group II, whereas, in Group I, all plates showed an early bending followed by plate breakage. Discussion and conclusion: Both plate systems enable screw placement around hip stems. The hinge plate showed superior biomechanical results compared with the locking compression plate/locking attachment plate construct. Furthermore, the hinge plate offers variable hinges and variable angel locking making bicortical screw placement around hip stems more comfortable and safe. The translational potential of this article: The results of this study can be directly transferred to patient care. With the innovative hinge plate, the surgeon has a biomechanically superior implant, which also offers improved options for screw placement compared to a standard locking plate.

Abstract Background Periprosthetic femoral fracture is identified as the third most frequent reason for revision total hip arthroplasty (THA). Treatment of periprosthetic fractures of the femur after THA remains a surgical challenge. In this report, we presented 2 patients with periprosthetic proximal femur fracture variant (a fracture of the greater trochanter with lateral cortical extension) and femoral stem destabilization. Cases presentation Two patients presented with chief complaints of pain in hip, restricted hip movements and gait changes. On the basis of clinicoradiological findings, the patients were diagnosed as pseudo AGT periprosthetic fracture, since the stem was loosened. They underwent open reduction and internal fixation (ORIF) with cables. After 2 years of follow-up, the 2 patients had favorable clinical outcomes after operation. Both lower limbs of the 2 patients were of equal length. The Harris score of the two hips was 96 and 94, respectively. Conclusion CT scan worked better than X-ray examination in the diagnosis of prosthetic looseness with this type of fracture. Compared to longer-stem revision, ORIF with cables could also achieve good result with these fractures.

Cemented polished tapered femoral stems (PTS) made of cobalt–chrome alloy (CoCr) are a known risk factor for periprosthetic fracture (PPF). The mechanical differences between CoCr-PTS and stainless-steel (SUS) PTS were investigated. CoCr stems having the same shape and surface roughness as the SUS Exeter® stem were manufactured and dynamic loading tests were performed on three each. Stem subsidence and the compressive force at the bone–cement interface were recorded. Tantalum balls were injected into the cement, and their movement was tracked to indicate cement movement. Stem motions in the cement were greater for the CoCr stems than for the SUS stems. In addition, although we found a significant positive correlation between stem subsidence and compressive force in all stems, CoCr stems generated a compressive force over three times higher than SUS stems at the bone–cement interface with the same stem subsidence (p < 0.01). The final stem subsidence amount and final force were greater in the CoCr group (p < 0.01), and the ratio of tantalum ball vertical distance to stem subsidence was significantly smaller for CoCr than for SUS (p < 0.01). CoCr stems appear to move more easily in cement than SUS stems, which might contribute to the increased occurrence of PPF with the use of CoCr-PTS.

Introduction and Aim Periprosthetic femoral fractures (PFF) represent an increasing clinical and economic burden. This study aims to determine the optimal configuration of a bridge-combined internal fixation system in the treatment of Vancouver type B1 PFF, using finite element analysis. Materials and methods A three-rod ortho-bridge system (OBS) fixation model was used to evaluate the optimal configuration of four target parameters: position of the third rod; intersection angle between the proximal screws; connecting rod diameter; and number of screws used. Femoral displacement and the maximum von Mises stress of the OBS were used as the evaluation indices, to analyze the PFF and to determine the optimal use of an OBS. For each parameter, various candidate options were tested. Results Finite element analysis revealed that the rate of femoral displacement and the maximum von Mises stress of the OBS were at a minimum when there was a 35 mm downward movement of the third rod from the baseline. Therefore, the optimal position of third rod fixation was 35 mm below the fovea capitis of the femur. The optimal intersection angles between the proximal screws were found to be 71.92° or 84°. A 6 mm diameter connecting rod proved to be most effective. Configuration d, utilizing 7 screws, represented the most clinically appropriate screw number configuration, despite configuration f, utilizing 9 screws, eliciting the best evaluation indices. Conclusion An OBS used in the above-described configuration is well suited to the characteristics of PFF and provides an effective and reliable means for their treatment. [ABSTRACT FROM AUTHOR]

Objective To explore the efficacy and safety of intravenous tranexamic acid for reducing perioperative blood loss and allogeneic blood transfusions in revision surgery for Vancouver type B periprosthetic femoral fractures after total hip arthroplasty (THA). Methods We retrospectively reviewed 129 patients who underwent revision surgeries because of Vancouver type B periprosthetic femoral fractures from January 2008 to September 2018. Patients were divided into two groups according to whether they received intravenous tranexamic acid (n = 72) or not (n = 57). The two groups were compared in terms of estimated intraoperative blood loss, visible blood loss, hidden blood loss, the volume of allogeneic blood transfusion and the incidence of symptomatic venous thromboembolism (VTE). Patients were also compared depending on the Vancouver classification (Vancouver type B1, B2, and B3). Results Regardless of the subtype of Vancouver classification, patients who received tranexamic acid showed significantly lower estimated intraoperative blood loss, visible blood loss, hidden blood loss, and allogeneic blood transfusion volume. Use of tranexamic acid was not associated with significant changes in the incidence of postoperative symptomatic VTE. Similar results were obtained with subgroups of patients who had the Vancouver type B1, B2, or B3 periprosthetic femoral fractures. Conclusions The administration of intravenous tranexamic acid can safely and effectively reduce perioperative blood loss and allogeneic blood transfusions in revision surgery for Vancouver type B periprosthetic femoral fractures, without increasing the risk of symptomatic VTE.

Objectives: To determine the potential risk factors for intraoperative periprosthetic femoral fractures in patients with developmental dysplasia of the hip (DDH) undergoing total hip arthroplasty (THA). Methods: This was a retrospective study. Patients who were diagnosed with DDH and undergoing THA (by artificial joint replacement) at our hospital from January 1999 to December 2019 were included in this study. Clinical and radiological factors were obtained from their medical records, such as age, sex, Crowe classification, morphological features of proximal femur, and features of surgical procedure. The outcome of interest was the occurrence of intraoperative periprosthetic femoral fracture, which was recorded and classified according to the Vancouver classification system. According to the fracture status, the patients were divided into two groups: the fracture group and the non‐fracture group. Multivariate logistic regression model was built to identify the risk factors for these fractures. Results: A total of 1252 hips were finally included. Intraoperative periprosthetic femoral fractures were identified in 62 hips. The incidence of intraoperative periprosthetic femoral fractures in patients with DDH undergoing THA was 4.95%. There were 22 patients (proportion = 35.48%, incidence = 1.76%) with Type A fractures, 38 (proportion = 61.29%, incidence = 3.04%) with Type B fractures, and two (proportion = 3.23%, incidence = 0.16%) with Type C fractures. Six independent risk factors for intraoperative periprosthetic femoral fractures were identified: osteoporosis (OR = 3.434; 95% CI, 1.963–6.007), previous surgical history (OR = 4.797; 95% CI, 2.446–9.410), Dorr Type A canal (OR = 3.025; 95% CI, 1.594–5.738), retained femoral neck length (OR = 1.121; 95% CI, 1.043–1.204), implanted metaphyseal‐diaphyseal fixation stems (OR = 3.208; 95% CI, 1.562–6.591), and implanted stem with anteversion design (OR = 2.916; 95% CI, 1.473–5.770). Conclusions: The overall incidence of intraoperative periprosthetic femoral fractures in patients with DDH undergoing THA was 4.95%, which was at a moderate level compared to patients with other diseases undergoing THA. Six independent risk factors were identified: osteoporosis, previous surgical history, Dorr Type A canal, insufficient neck osteotomy level, implantation of metaphyseal‐diaphyseal fixation stem, and implantation of a stem with an anteversion design. Comprehending these risk factors might help surgeons prevent the occurrence of these intraoperative periprosthetic femoral fractures in patients with DDH. [ABSTRACT FROM AUTHOR]

Osteopetrosis is an inherited disorder characterized by increased bone density and brittle bone quality. Degenerative changes often occur after the age of 40 in patients with osteopetrosis. Operative intervention is the primary treatment option if the clinical manifestation of secondary osteoarthritis is severe. A 44-year-old male suffering autosomal dominant osteopetrosis and progressive unilateral hip osteoarthritis required a total hip arthroplasty. However, there were several technical challenges associated with this procedure including creating a femoral medullary canal and developing a Vancouver type B2 periprosthetic femoral fracture postoperatively. To afford some experience for the management of similar cases, we here present our technical solutions to these problems.

Objective: To explore the efficacy and safety of intravenous tranexamic acid for reducing perioperative blood loss and allogeneic blood transfusions in revision surgery for Vancouver type B periprosthetic femoral fractures after total hip arthroplasty (THA). Methods: We retrospectively reviewed 129 patients who underwent revision surgeries because of Vancouver type B periprosthetic femoral fractures from January 2008 to September 2018. Patients were divided into two groups according to whether they received intravenous tranexamic acid (n = 72) or not (n = 57). The two groups were compared in terms of estimated intraoperative blood loss, visible blood loss, hidden blood loss, the volume of allogeneic blood transfusion and the incidence of symptomatic venous thromboembolism (VTE). Patients were also compared depending on the Vancouver classification (Vancouver type B1, B2, and B3). Results: Regardless of the subtype of Vancouver classification, patients who received tranexamic acid showed significantly lower estimated intraoperative blood loss, visible blood loss, hidden blood loss, and allogeneic blood transfusion volume. Use of tranexamic acid was not associated with significant changes in the incidence of postoperative symptomatic VTE. Similar results were obtained with subgroups of patients who had the Vancouver type B1, B2, or B3 periprosthetic femoral fractures. Conclusions: The administration of intravenous tranexamic acid can safely and effectively reduce perioperative blood loss and allogeneic blood transfusions in revision surgery for Vancouver type B periprosthetic femoral fractures, without increasing the risk of symptomatic VTE. [ABSTRACT FROM AUTHOR]

Periprosthetic fractures are a growing concern due to the increasing frequency of primary joint replacement surgery, with total hip arthroplasty being the most common. The incidence of periprosthetic fractures after revision surgery ranges from 4 to 11 %, with up to 30 % reported after knee revision surgery. This case report aims to describe the treatment of an 81-year-old woman suffering from neglected periprosthetic femoral fracture post hemiarthroplasty. An 81-year-old woman with a history of hemiarthroplasty surgery and hypertension was admitted to the ER with pain in her right thigh. She had a middle shaft femoral fracture and was scheduled for open reduction and internal fixation. Despite being fully conscious and having an average pulse rate and blood pressure, she had cardiomegaly and congestive pulmonum. Unfortunately, this patient did not receive appropriate medical treatment after it occurred for 1 month. After surgery, we evaluated the implant, and the implant stabilized the fracture. After 1–3 months after surgery, the LEFS (The Lower Extremity Functional Scale) score was found that the score increase significantly after surgery. The Vancouver classification system manages periprosthetic fractures by assessing location, stability, and bone quality. Type A fractures involve the trochanter, while type B fractures are diaphyseal and can extend distally. ORIF is used for subtype B1 fractures, but newer techniques offer shorter operating times and fewer complications. From this study, we can conclude that even though neglected cases procedure with ORIF promises a good outcome based on clinical evaluation. • Treating neglected cases procedure with ORIF promises a good outcome based on clinical evaluation. • Before choosing ORIF as a treatment, it is imperative to categorize the fracture type using the Vancouver classification. • ORIF has been proven to have shorter operating and anesthetic time, fewer blood transfusions, and fewer complications. [ABSTRACT FROM AUTHOR]

Th e rate of periprosthetic femoral fractures following total hip replacement has been growing steadily in the last 20 years and ranges from 0.1% to 2.1%. These fractures are mostly related to older patients with the presence of chronic diseases and frequently poor bone quality. Th e treatment is surgically very complex and demanding, followed by a series of complications. Th e evaluation in this retrospective study included 23 patients who were medically treated from January 2004 to December 2015 with the mean follow-up of 14.5 (range, 9-25) months. Th ere were 17 patients with cement total hip arthroplasty (THA) and 6 with cementless THA. During treatment of fractures, different techniques were implemented including the use of wire cerclage, dynamic compression plates (DCP), a locking compression plate (LCP) system, and long revision stem. For the purpose of distinguishing fractures, we used the Vancouver classifi cation by Duncan and Masri. For clinical evaluation, we used the modifi ed Merle d’Aubigne score system and monitored complications during treatment. Th e aim is to show treatment results of the type B periprosthetic femoral fractures by using diff erent operative treatment techniques. According to the Vancouver classifi cation within type B, 10 (43.47%) patients had type B1 fractures, another 10 (43.47%) patients had type B2 fractures, and three (13.04%) patients had type B3 fractures. According to gender distribution, there were eight (34.8%) male and 15 (65.2%) female patients, mean age 59.5 (range, 47-86) years. Twelve (52.2%) and 11 (47.8%) patients had left- and right-sided fractures, respectively. Th e mean length of hospital stay was 16 (range, 9-26) days. According to the Merle d’Aubigne score system, 10 patients with type B1 fractures had the mean score of 11.5 points, which is poor result. Poor result was also recorded in patients with type B2 fractures, with the mean score of 10.6 points. Th e three patients with type B3 fractures had the mean score of 12 points, which is considered fair score. In conclusion, Vancouver classifi cation has been widely accepted and using the protocols makes decision making during treatment much easier. During treatment of this type of fracture, we used various implants, wire cerclage, DCP and LCP, as well as long stem revision. In certain cases, we applied surgical techniques, implants that are not recommended by the Vancouver protocol by which we treated periprosthetic femoral fractures; in these case, we recorded nonunion bone, malunion and breaking of implants, which resulted in poor treatment outcome.

Periprosthetic femoral fractures (PPFF) around total hip arthroplasty (THA) are one of the leading causes of hip revision. High mortality rates are observed after revision in case of PPFF around THA. To modify risk factors, early postoperative mobilization is necessary. Permissive weight bearing (PWB) is designed to optimize clinical recovery in aftercare. This study aimed to perform a scoping review to summarize the current available evidence on postoperative weight bearing in late PPFF around THA and the implementation of PWB in aftercare. A systematic search was performed on the Cochrane Library, Web of Science, Ovid MEDLINE, EMBASE, and CINAHL databases on January 26th, 2023. Articles were screened in two stages by two independent reviewers. Studies describing adult patients with a history of primary THA who were surgically treated for late PPFF and mentioning prescribed postoperative weight-bearing protocols with relevant outcome measures were included. Seven studies were included, reporting data on 22 patients (age range 47-97 years, BMI range 19-32 kg/m 2 , ASA classification range 2-3). No studies used PWB in aftercare. The non-weight-bearing group showed no complications. The restricted weight-bearing group had one death and one implant failure. The full weight-bearing group experienced one deep infection and one plate removal because of impingement. The main finding was that, after an extensive systematic search, no articles could be included focusing on PWB in patients with a late PPFF after THA. Addressing this gap in the literature is essential to advancing the understanding of postoperative weight-bearing protocols and PWB for late PPFF around THA., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Vesseur et al.)

The increasing prevalence of periprosthetic femoral fractures, specifically in the vicinity of the hip, has emerged as a significant issue in recent times. Consequently, there is a need for a thorough examination to enhance the effectiveness of management and treatment approaches. The findings of this study emphasize a significant disparity in the occurrence and characteristics of these fractures, and the multiple cases have highlighted the efficacy of various treatment strategies, such as open reduction and internal fixation, as well as the utilization of cortical strut allografts. Furthermore, the study has identified potential risk factors that have an impact on the characteristics of fractures, providing valuable insights that could be crucial in the development of preventive strategies. This study provides a thorough examination of periprosthetic femoral fractures, highlighting the importance of a cohesive treatment algorithm to improve the handling of such fractures. Moreover, it promotes the need for a collaborative endeavor in conducting research in this field, cultivating a more profound comprehension that has the potential to drive progress in therapeutic approaches, ultimately enhancing patient results over an extended period of time. It is crucial that forthcoming research endeavors persist in expanding upon these discoveries, striving towards a unified methodology in tackling this substantial clinical obstacle., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Cursaru et al.)

Osteopetrosis is an inherited disorder characterized by increased bone density and brittle bone quality. Degenerative changes often occur after the age of 40 in patients with osteopetrosis. Operative intervention is the primary treatment option if the clinical manifestation of secondary osteoarthritis is severe. A 44-year-old male suffering autosomal dominant osteopetrosis and progressive unilateral hip osteoarthritis required a total hip arthroplasty. However, there were several technical challenges associated with this procedure including creating a femoral medullary canal and developing a Vancouver type B2 periprosthetic femoral fracture postoperatively. To afford some experience for the management of similar cases, we here present our technical solutions to these problems. [ABSTRACT FROM AUTHOR]

Introduction: Permissive weight bearing (PWB) has relatively recently been implemented to optimize rapid clinical recovery and restoration of function in patients suffering lower extremity fractures. PWB shows outcome advantages in this patient category. Currently, there are no decisive recommendations on postoperative load-bearing management after surgically treated periprosthetic femoral fractures (PPFF) around hip arthroplasty. The objective is to investigate the current postoperative practice of weight-bearing instructions for patients with surgically treated PPFF, accounting for differences in types of periprosthetic fractures and treatment options among Dutch orthopedic surgeons., Materials and Methods: An online survey was distributed among the members of the hip and trauma working groups of the Dutch Orthopedic Association., Results: The response rate was 13% (n=75). The main finding was that postoperative load bearing regimes in Vancouver A, B, and C PPFFs differed greatly among Dutch orthopedic surgeons, and there was no decisive guideline or consensus in postoperative load bearing regimes after surgically treated PPFF was used in the Netherlands., Conclusion: In the absence of decisive guidelines or consensus, more research is needed to explore the efficacy of PWB after surgically treated PPFF., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2023, Vesseur et al.)

Background: It is conventionally considered that bone grafting is mandatory for Vancouver B3 periprosthetic femoral fractures (PFF) although few clinical studies have challenged the concept previously. The aim of the current study was to investigate the radiographic and functional results of Vancouver B3 PFF treated by revision total hip or hemiarthroplasty (HA) in combination with appropriate internal fixation without bone grafting. Materials and Methods: 12 patients with Vancouver B3 PFF were treated by revision THA/HA without bone grafting between March 2004 and May 2008. There were nine females and three males, with an average age of 76 years. PFFs were following primary THA/HA in nine patients and following revision THA/HA in three. Postoperative followup was 5.5 years on average (range, 3.5-6.5 years). At the final followup, radiographic results were evaluated with Beals and Tower's criteria and functional outcomes were evaluated using the Merle d'Aubigné scoring system. Results: All fractures healed within an average of 20 weeks (range, 12-28 weeks). There was no significant deformity and shortening of the affected limb and the implant was stable. The average Merle d'Aubigné score was 15.8. Walking ability was regained in 10 patients without additional assistance, while 2 patients had to use crutches. There were 2 patients with numbness of lateral thigh, possibly due to injury to the lateral femoral cutaneous nerve. There were no implant failures, dislocation and refractures. Conclusions: Revision THA/HA in combination with appropriate internal fixation without bone grafting is a good option for treatment of Vancouver B3 periprosthetic femoral fractures in the elderly. [ABSTRACT FROM AUTHOR]

Introduction: Fractures around the femoral stem are difficult complications to treat. In revision surgery, good results can be obtained by a long cementless stem with a distal locking screw. However, there are few reports of treatment for cases where the stem itself is broken., Case Report: The case of a 69-year-old woman in which the femoral stem that was broken 5 years after performing revision surgery for a right periprosthetic femoral fracture was repaired using a solid long stem with a distal locking screw is presented. Her past history included osteoporosis and rheumatoid arthritis. She fell due to sudden right thigh pain and was then taken to the emergency department of our hospital. X-ray examination showed breakage of the stem itself at the position of the distal locking screw hole closest to the previous fracture. Revision total hip arthroplasty using a larger diameter stem of the same model was performed. The previous fracture site had been a fibrous non-union, and the femur proximal to the previous fracture site had severe atrophy and bone loss due to stress shielding. Two years after surgery, the patient can walk without pain, and progression of stress shielding, loosening of the stem, and breakage of the implants have not occurred., Conclusion: In the present case, non-union, proximal bone atrophy, the location of the hole of the distal locking screw, and insufficient stem strength were the causes of stem breakage. It is necessary to take measures such as bone grafting and select a stem as long as possible for the position of the distal locking screw to be as far as possible from the fracture line when using a narrow long stem with a distal locking screw., Competing Interests: Conflict of Interest: Nil, (Copyright: © Indian Orthopaedic Research Group.)

Background: The incidence of fractures around the femoral prosthesis among patients undergoing hip arthroplasty is increasing and has become the third leading cause of hip revision. While numerous methods for the surgical treatment of periprosthetic femoral fractures (PFFs) have been proposed, only few reports have examined the long-term efficacy of surgical treatment. This study aims to examine the mid-and long-term efficacy of surgical treatment among patients with Vancouver B2 and B3 PFFs.Methods: This retrospective study evaluated the surgical outcomes of patients with Vancouver B2 and B3 PFFs between 2007 and 2011. The minimum follow-up time was eight years. Fracture healing, prosthesis stability, complications, patient quality of life SF-36 score, and survival rate were evaluated during the follow-up assessments.Results: A total of 83 patients were included and had an average follow-up period of 120.3 months. Among these patients, 69 were classified as Vancouver B2 and were treated with a distal fixation stem, whereas 14 cases were classified as Vancouver B3 and were treated with modular femoral prosthesis by using a proximal femoral allograft technique. A total of 15 patients underwent secondary revision surgery, and prosthesis dislocation was identified as the main cause of secondary revision. 80 (96.4%) cases of fractures were clinically healed. The mortality rate in the first year after surgery was 8.4% (7/83). The overall 5-year Kaplan-Meier survival rate for these patients was 75.9%. Meanwhile, the 5-year Kaplan-Meier survival rate for the implants was 86.9%. The final follow-up SF-36 score of the patients was 48.3 ± 9.8.Conclusions: Patients with Vancouver B2 and B3 PFFs show high mortality in the first year after their surgery, and the Kaplan-Meier analysis results showed that such mortality tends to plateau after 5 years. Prosthesis dislocation was identified as the primary cause of secondary revision. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to evaluate the mid- to long-term outcomes of revision surgery for Vancouver type B2 periprosthetic femoral fractures (PFFs) after total hip arthroplasty using an uncemented extensive porous titanium-coated long femoral stem prosthesis (solution prosthesis) with or without cortical strut allograft., Methods: A total of 34 patients with Vancouver type B2 PFFs who underwent revision hip arthroplasty using a posterolateral approach and received a solution prosthesis at our institution from December 2006 to January 2014 were retrospectively recruited. Patients were asked to assess their walking ability and pain status using a questionnaire. Limb function, pain, and physical and mental health were assessed using the Harris Hip score, University of California-Los Angeles score, Western Ontario and McMaster Universities osteoarthritis index, and Short Form-12 Health Survey score. Patients were also asked to rate their satisfaction with the surgery. Fracture union and stress shielding were assessed by radiography, and computed tomography was used to assess stem fixation. Single-photon emission computed tomography performed to assess radionuclide distribution in patients given cortical strut allografts. Patients were asked about their condition before PFF and evaluated at 6 weeks, 3 months, 6 months, 1 year, and annually after surgery. Any complications during follow-up were recorded., Results: Of the 34 patients, 29 completed follow-up. There was no significant difference in patient's health before PFF or at the last follow-up. Fracture union was achieved in all patients. Mild-to-moderate stress shielding occurred in three patients, and no patients exhibited femoral stem loosening or obvious subsidence. Radionuclides were concentrated in the cortical strut transplantation area, and the cortical strut was integrated with the host femur. The incidence of postoperative complications was low., Conclusions: Revision surgery using the solution prosthesis with or without cortical strut allograft is effective in treating Vancouver type B2 PFFs, with satisfactory mid- and long-term clinical and radiological outcomes.

Objectives: This study tests the biomechanical properties of adjacent locked plate constructs in a femur model using Sawbones. Previous studies have described biomechanical behaviour related to inter-device distances. We hypothesise that a smaller lateral inter-plate distance will result in a biomechanically stronger construct, and that addition of an anterior plate will increase the overall strength of the construct., Methods: Sawbones were plated laterally with two large-fragment locking compression plates with inter-plate distances of 10 mm or 1 mm. Small-fragment locking compression plates of 7-hole, 9-hole, and 11-hole sizes were placed anteriorly to span the inter-plate distance. Four-point bend loading was applied, and the moment required to displace the constructs by 10 mm was recorded., Results: We found that a 1 mm inter-plate distance supported greater moments than a 10 mm distance in constructs with only lateral plates. Moments supported after the addition of a 9- or 11-hole anterior plate were greater for both 10 mm and 1 mm inter-plate distance, with the 11-hole anterior plate supporting a greater moment than a 9-hole plate. Femurs with a 7-hole anterior plate fractured regardless of lateral inter-plate distance size., Conclusion: This suggests that the optimal plate configuration is to minimise lateral inter-plate distance and protect it with an anterior plate longer than seven holes. Cite this article: Bone Joint Res 2015;4:23-8., (©2015 The British Editorial Society of Bone & Joint Surgery.)