Search

This study introduces a novel magnetic nanohybrid material consisting of ferromagnetic (FM) bcc Fe–Co nanoparticles (NPs) grown on nanodiamond (ND) nanotemplates. A combination of wet chemistry, which produces chemical precursors and their subsequent thermal treatment under vacuum, was utilized for its development. The characterization and study of the prepared samples performed with a range of specialized experimental techniques reveal that thermal treatment of the as-prepared hybrid precursors under a range of annealing conditions leads to the development of Co-rich Fe–Co alloy NPs, with average sizes in the range of 6–10 nm, that exhibit uniform distribution on the surfaces of the ND nanotemplates and demonstrate FM behavior throughout a temperature range from 2 K to 400 K, with maximum magnetization values ranging between 18.9 and 21.1 emu/g and coercivities ranging between 112 and 881 Oe. Moreover, 57Fe Mössbauer spectroscopy reveals that apart from the predominant bcc FM Fe–Co phase, iron atoms also participate in the formation of a secondary martensitic-type Fe–Co phase. The emergence of this distinctive phase is attributed to the diffusion of carbon atoms within the Fe–Co lattices during their formation at elevated temperatures. The source of these carbon atoms is related to the unique morphological properties of the ND growth matrices, which facilitate surface sp2 formations. Apart from their diffusion within the Fe–Co NP lattice, the carbon atoms also reconstruct layered graphitic-type nanostructures enveloping the metallic alloy NPs. These non-typical nanohybrid materials, reported here for the first time in the literature, hold significant potential for use in applications related, but not limited to, biomedicine, biopharmaceutics, catalysis, and other various contemporary technological fields. [ABSTRACT FROM AUTHOR]

This study introduces a novel magnetic nanohybrid material consisting of ferromagnetic (FM) bcc Fe–Co nanoparticles (NPs) grown on nanodiamond (ND) nanotemplates. A combination of wet chemistry, which produces chemical precursors and their subsequent thermal treatment under vacuum, was utilized for its development. The characterization and study of the prepared samples performed with a range of specialized experimental techniques reveal that thermal treatment of the as-prepared hybrid precursors under a range of annealing conditions leads to the development of Co-rich Fe–Co alloy NPs, with average sizes in the range of 6–10 nm, that exhibit uniform distribution on the surfaces of the ND nanotemplates and demonstrate FM behavior throughout a temperature range from 2 K to 400 K, with maximum magnetization values ranging between 18.9 and 21.1 emu/g and coercivities ranging between 112 and 881 Oe. Moreover, 57Fe Mössbauer spectroscopy reveals that apart from the predominant bcc FM Fe–Co phase, iron atoms also participate in the formation of a secondary martensitic-type Fe–Co phase. The emergence of this distinctive phase is attributed to the diffusion of carbon atoms within the Fe–Co lattices during their formation at elevated temperatures. The source of these carbon atoms is related to the unique morphological properties of the ND growth matrices, which facilitate surface sp2 formations. Apart from their diffusion within the Fe–Co NP lattice, the carbon atoms also reconstruct layered graphitic-type nanostructures enveloping the metallic alloy NPs. These non-typical nanohybrid materials, reported here for the first time in the literature, hold significant potential for use in applications related, but not limited to, biomedicine, biopharmaceutics, catalysis, and other various contemporary technological fields.

The efficacy of oxygen (O) surface terminations on diamond is an important factor for the performance and stability for diamond-based quantum sensors and electronics. Given the wide breadth of O-termination techniques, it can be difficult to discern which method would yield the highest and most consistent O coverage. Furthermore, the interpretation of surface characterization techniques is complicated by surface morphology and purity, which if not accounted for will yield inconsistent determination of the oxygen coverage. We present a comprehensive approach to consistently prepare and analyze oxygen termination of surfaces on (100) single-crystalline diamond. We report on x-ray photoelectron spectroscopy (XPS) characterization of diamond surfaces treated with six oxidation methods that include various wet chemical oxidation techniques, photochemical oxidation with UV illumination, and steam oxidation using atomic layer deposition (ALD). Our analysis entails a rigorous XPS peak-fitting procedure for measuring the functionalization of O-terminated diamond. The findings herein have provided molecular-level insights on oxidized surfaces in (100) diamond, including the demonstration of clear correlation between the measured oxygen atomic percentage and the presence of molecular contaminants containing nitrogen, silicon, and sulfur. We also provide a comparison of the sp ^2 carbon content with the O1s atomic percentage and discern a correlation with the diamond samples treated with dry oxidation which eventually tapers off at a max O1s atomic percentage value of 7.09 ± 0.40%. Given these results, we conclude that the dry oxidation methods yield some of the highest oxygen amounts, with the ALD water vapor technique proving to be the cleanest technique out of all the oxidation methods explored in this work.

Diamond is an important material for electrical and electronic devices. Because the diamond is in contact with the metal in these applications, it becomes necessary to study the metal–diamond interaction and the structure of the interface, in particular, at elevated temperatures. In this work, we study the interaction of the (100) and (111) surfaces of a synthetic diamond single crystal with spattered titanium and molybdenum films. Atomic force microscopy reveals a uniform coating of titanium and the formation of flattened molybdenum nanoparticles. A thin titanium film is completely oxidized upon contact with air and passes from the oxidized state to the carbide state upon annealing in an ultrahigh vacuum at 800 °C. Molybdenum interacts with the (111) diamond surface already at 500 °C, which leads to the carbidization of its nanoparticles and catalytic graphitization of the diamond surface. This process is much slower on the (100) diamond surface; sp2-hybridized carbon is formed on the diamond and the top of molybdenum carbide nanoparticles, only when the annealing temperature is raised to 800 °C. The conductivity of the resulting sample is improved when compared to the Ti-coated diamond substrates and the Mo-coated (111) substrate annealed at 800 °C. The presented results could be useful for the development of graphene-on-diamond electronics. [ABSTRACT FROM AUTHOR]

Amorphous carbon (AC) is present in the bulk and on the surface of nanostructured carbon materials (NCMs) and exerts a significant effect on the physical, chemical and mechanical properties of NCMs. Thus, the determination of AC in NCMs is extremely important for controlling the properties of a wide range of materials. In this work, a comparative study of the effect of heat treatment on the structure and content of amorphous carbon in deposited AC film, nanodiamonds, carbon black and multiwalled carbon nanotube samples was carried out by TEM, XPS, XRD and Raman spectroscopy. It has been established that the use of the 7-peak model for fitting the Raman spectra makes it possible not only to isolate the contribution of the modes of amorphous carbon but also to improve the accuracy of fitting the fundamental G and D2 (D) modes and obtain a satisfactory convergence between XPS and Raman spectroscopy. The use of this model for fitting the Raman spectra of deposited AC film, ND, CB and MWCNT films demonstrated its validity and effectiveness for investigating the amorphous carbon in various carbon systems and its applicability in comparative studies of other NCMs. [ABSTRACT FROM AUTHOR]

Boron-doped diamond (BDD) is of increasing interest for applications in electrochemical sensing. It is well known that the sp2 carbon content in BDD influences its electrochemical properties as electrode material. In this work, evidence is provided that the surface sp2 carbon content plays a crucial role in the electrochemical sensitivity of BDD towards glucose. Single-crystal BDD, freestanding polycrystalline BDD and glassy carbon (sp2 carbon reference material) were examined by voltammetry. Neither single-crystal BDD, which is free of sp2 carbon, nor pure sp2 glassy carbon could detect glucose in the range of 0.2–1.0 V. On the other hand, glucose oxidation was observed on polycrystalline BDD, and with increasing intensity with increase of sp2 carbon content. Thus, an optimum amount of (B-doped) sp2 carbon in the BDD electrode is needed for best sensing performance. Understanding this, and being able to control the composition of BDD, are not only important to glucose detection but to any electrochemical sensing application involving BDD.

The effect of sp2 carbon within a boron-doped diamond (BDD) electrode on the electrochemical reduction of CO2 is investigated for the first time. With increasing sp2 content, the Faradaic efficiency for the production of hydrogen (H2) under constant current density increases while that for the production of formic acid (HCOOH) decreases. Moreover, favorable electrolysis conditions for producing HCOOH shift in the negative potential direction with increasing sp2 content. This phenomenon is ascribed to the presence of adsorption sites on the sp2 carbon. This work provides guidance for selectively controlling the reduction of CO2 by adjusting the distribution of carbonaceous species in the BDD electrode.

[Display omitted] • BDD electrodes with controlled amounts of sp2 carbon were systematically studied. • Glucose oxidation on BDD is strongly affected by the surface sp2 carbon content. • Single-crystal BDD is catalytically inert towards glucose oxidation. • Nucleation side of freestanding BDD showed highest sensitivity (7.25 µA mM−1 cm−2). • Optimum amount of sp2 carbon in BDD is needed for best sensing performance. Boron-doped diamond (BDD) is of increasing interest for applications in electrochemical sensing. It is well known that the sp2 carbon content in BDD influences its electrochemical properties as electrode material. In this work, evidence is provided that the surface sp2 carbon content plays a crucial role in the electrochemical sensitivity of BDD towards glucose. Single-crystal BDD, freestanding polycrystalline BDD and glassy carbon (sp2 carbon reference material) were examined by voltammetry. Neither single-crystal BDD, which is free of sp2 carbon, nor pure sp2 glassy carbon could detect glucose in the range of 0.2–1.0 V. On the other hand, glucose oxidation was observed on polycrystalline BDD, and with increasing intensity with increase of sp2 carbon content. Thus, an optimum amount of (B-doped) sp2 carbon in the BDD electrode is needed for best sensing performance. Understanding this, and being able to control the composition of BDD, are not only important to glucose detection but to any electrochemical sensing application involving BDD. [ABSTRACT FROM AUTHOR]

• Electrochemical reduction of CO 2 was conducted on BDD electrodes with differing sp2 content. • With increasing sp2 content, the production of formic acid was reduced. • Onset potential of CO 2 RR shifted to more negative value on increasing sp2. • The adsorption site on sp2 carbon is important for CO 2 RR. • Selectivity of CO 2 RR can be controlled by adjusting carbonaceous species in BDD electrode. The effect of sp2 carbon within a boron-doped diamond (BDD) electrode on the electrochemical reduction of CO 2 is investigated for the first time. With increasing sp2 content, the Faradaic efficiency for the production of hydrogen (H 2) under constant current density increases while that for the production of formic acid (HCOOH) decreases. Moreover, favorable electrolysis conditions for producing HCOOH shift in the negative potential direction with increasing sp2 content. This phenomenon is ascribed to the presence of adsorption sites on the sp2 carbon. This work provides guidance for selectively controlling the reduction of CO 2 by adjusting the distribution of carbonaceous species in the BDD electrode. [ABSTRACT FROM AUTHOR]