Search

• AgO/MgO/FeO/Si 3 N 4 synthesized by microwave irradiation method. • Adsorption of tetracycline. • Maximum adsorption capacity of 172.41 mg/g. • Energy sites found to be energetically heterogeneous. Present study has been designed to govern the usage of nanocomposite of Si 3 N 4 with trimetallic oxide nanoparticles of Ag, Mg and Fe (AgO/MgO/FeO@Si 3 N 4) for the tetracycline (TC) removal from aqueous solution. Characterization techniques such as SEM, TEM, XRD, FTIR, XPS and BET were employed for analysing the successful fabrication of AgO/MgO/FeO@Si 3 N 4 nanocomposite. Adsorption process has been found to be dependent upon the surface properties of AgO/MgO/FeO@Si 3 N 4 nanocomposite (such as charge, functionality, etc), concentration of TC, solution pH and contact time. As determined from the isotherm studies, surface of AgO/MgO/FeO@Si 3 N 4 nanocomposite has been found to be energetically heterogeneous in nature as the data fitted well to Freundlich isotherm. Maximum adsorption capacity of AgO/MgO/FeO@Si 3 N 4 nanocomposite has been found to be 172.41 mg/g. Pseudo-second order kinetic model successfully explained the rate studies of TC adsorption. Also, reusability study of AgO/MgO/FeO@Si 3 N 4 nanocomposite has also been carried out. In short, the present study could determine an effective way for the removal of toxic pollutants from the wastewater system. [ABSTRACT FROM AUTHOR]

Pectin based quaternary amino anion exchanger (Pc-QAE) was prepared using simple crosslinking polymerization method. This anion exchanger was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Pc-QAE was applied for the removal of phosphate anion from the aqueous solution. The adsorption process which was pH dependent showed maximum adsorption of phosphate anions at pH 7. Pc-QAE showed good monolayer adsorption capacity for phosphate anions which demonstrated its good capability towards Langmuir isotherm model. Moreover, the adsorption was evaluated thermodynamically and the negative value of Gibbs free energy (−1.791 KJ/mol) revealed the spontaneity of adsorption process. The value of ΔH° and ΔS° were found to be 15.28 and 49.48 KJ/mol, respectively representing the endothermic nature and enhancement in degree of freedom due to the adsorption process. [ABSTRACT FROM AUTHOR]

In this study, we have synthesized a starch/poly(alginic acid-cl-acrylamide) nanohydrogel (ST/PL(AA-c!-AAm) NHG) by co-polymerization method which was used as an effective adsorbent for the removal of coomassie brilliant (CB) blue R-250 dye from the aqueous solution. The synthesized nanohydrogel was characterized by FTIR, SEM and TEM techniques. The effect of initial dye concentration, temperature, and agitation time on the adsorption ability of the nanohydrogel was studied comprehensively. The experimental outcomes exhibited that the prepared nanohydrogel had high adsorption tendency to remove the CB from the aqueous solution. The regression coefficient values for Langmuir (0.99), Frendluich (0.93) and Tempkin (0.98) recommended that adsorption process fit to langmuir isotherm. The pseudo-second-order equation showed the better adsorption kinetics of the adsorption process. The feasibility of CB adsorption onto ST/PL(AA-cI-AAm) NHG was also studied thermodynamically and the results indicated that the adsorption was spontaneous and chemical in nature. [ABSTRACT FROM AUTHOR]

The water resources contamination in an alarming concern for sustainable environment. This has led to development of new technologies and materials for waste water detoxification. In the present study, we have fabricated novel trimetallic based mixed oxides decorated reduced graphene oxide (rGO) composite using facile microwave method and utilized it as an adsorbent for the removal of congo red dye from aqueous solution. The final composite showed highly agglomerated metal oxides present on the rGO surface. The high surface area and activity of the synthesized adsorbent resulted in its high adsorption capacity of 333.32 mg/g for congo red. The Langmuir model better explained the isotherm data indicating the monolayer adsorption of congo red molecules onto Ag 2 O–Al 2 O 3 –ZrO 2 /rGO surface. The grander adsorption ability of Ag 2 O–Al 2 O 3 –ZrO 2 /rGO towards organic dye indicate its probable utilization in the removal of other dyes also from wastewater. • Trimetallic oxides decorated into rGO matrix were synthesized. • Adsorption of congo red from aqueous solution was investigated. • Maximum adsorption capacity of 333.32 mg/g was obtained using Langmuir isotherm. • Langmuir model better explained the adsorption isotherm data and mechanism. [ABSTRACT FROM AUTHOR]