Search

Agave tequilana Weber var. azul fibers (ATF) are widely used as a reinforcement material despite their polarity makes them incompatible with hydrophobic matrices. Consequently, ATF are commonly modified employing different chemical processes (e.g., mercerization and coupling agents) to change their surface characteristics to improve the interface between the fibers and the polymeric matrix. Nevertheless, these treatments could damage the fibers during the process, negatively affecting their natural properties. The use of nanotechnology to repair this natural material could help to restore its intrinsic properties and give it new ones as antibacterial activity. In this work, chemically treated ATF were used as templates for the biosynthesis of silver nanoparticles (AgNPs) using a natural extract obtained from Agave tequilana Weber var. azul leaves (ATL) as reducing agent. Scanning and transmission electron microscopy images as well as dynamic light scattering results indicate that stable nanometric particles were successfully synthesized on all fibers. X-ray photoelectron spectroscopy and X-ray diffraction results confirm the composition of the nanoparticles. Tensile tests indicate that AgNPs improved the mechanical properties of fibers previously mercerized and treated with maleic anhydride grafted polyethylene as coupling agent. Additionally, an antibacterial effect against S. enterica was conferred to ATF due to the presence of AgNPs. [ABSTRACT FROM AUTHOR]

In order to provide a second economic life to agave fibers, an important waste material from the production of tequila, filaments based on polylactic acid (PLA) were filled with agave fibers (0, 3, 5, 10 wt%), and further utilized to produce biocomposites by fused deposition modeling (FDM)-based 3D printing at two raster angles (−45°/45° and 0°/90°). Differential scanning calorimetry, water uptake, density variation, morphology, and composting of the biocomposites were studied. The mechanical properties of the biocomposites (tensile, flexural, and Charpy impact properties) were determined following ASTM international norms. The addition of agave fibers to the filaments increased the crystallinity value from 23.7 to 44.1%. However, the fibers generated porous structures with a higher content of open cells and lower apparent densities than neat PLA pieces. The printing angle had a low significant effect on flexural and tensile properties, but directly affected the morphology of the printed biocomposites, positively influenced the impact strength, and slightly improved the absorption values for biocomposites printed at −45°/45°. Overall, increasing the concentrations of agave fibers had a detrimental effect on the mechanical properties of the biocomposites. The disintegration of the biocomposites under simulated composting conditions was slowed 1.6-fold with the addition of agave fibers, compared to neat PLA. [ABSTRACT FROM AUTHOR]