Search

To improve the performance of thrusters by using two permanent ring-shaped magnets to push a magnetic field downward, we propose an annular–cylindrical combined-channel Hall thruster and numerically study its performance. The results indicate that, compared with simple annular channels, the annular–cylindrical combined channel can effectively increase the neutral gas density contained within it and increase the degree of ionization, efficiency, thrust, and specific impulse. Moreover, the sputtering zone of discharge channel is in front of the permanent magnets, i.e., wall erosion occurs upon ion bombardment during discharge. However, ions cannot bombard the permanent magnetic rings, thus guaranteeing a constant magnetic field and long discharge lifetime. [ABSTRACT FROM AUTHOR]

A low-power Hall-effect thruster was designed with two permanent magnet rings. This Hall-effect thruster contains a symmetrical double-peak magnetic field with a gradient larger than that of conventional Hall-effect thrusters. The matching of the anode position with the magnetic field determines the performance of the thruster to a very large extent. This study investigates the laws and mechanisms that govern the front end of a U-shaped hollow anode at the inner magnetic separatrix, the outer magnetic separatrix, and the area between them and influence the discharge characteristics of the thruster. The study shows that with the increase of anode length, the ionization and acceleration zones are pushed down toward the channel outlet and even into the plume region. At the same operating point, both the thrust and the efficiency are the largest when the anode is placed between the inner and outer magnetic separatrices. When the anode is placed at the inner magnetic separatrix, both the thrust and the efficiency are small because of the heavy energy loss on the walls, despite the high degree of ionization. Finally, when the anode is at the outer magnetic separatrix, the performance of the Hall-effect thruster is the poorest because of the lower degree of ionization and larger divergence angle of the plume upon the shift of the ionization zone toward the plume region. [ABSTRACT FROM AUTHOR]

This study adopts double permanent magnetic rings and four permanent magnetic rings to form two symmetrical magnetic peaks and two asymmetrical magnetic peaks in the channel of a Hall thruster, and uses a 2D-3V PIC-MCC model to analyze the influence of magnetic strength on the discharge characteristic and performance of Hall thrusters with an intermediate electrode and double-peaked magnetic field. As opposed to the two symmetrical magnetic peaks formed by double permanent magnetic rings, increasing the magnetic peak value deep within the channel can cause propellant ionization to occur; with the increase in the magnetic peak deep in the channel, the propellant utilization, thrust, and anode efficiency of the thruster are significantly improved. Double-peaked magnetic field can realize separate control of ionization and acceleration in a Hall thruster, and provide technical means for further improving thruster performance. Graphical abstract: [ABSTRACT FROM AUTHOR]

In this paper, a type of magnetically insulated anode structure is proposed for the design of a low-power cylindrical Hall thruster. The magnetic field distribution in the channel is guided by the magnetically insulated anode, altering the intersection status of the magnetic field line passing through the anode and wall. Experimental and simulation results show that a high potential is formed near the wall by the magnetically insulated anode. As the ionization moves towards the outlet, the energy and flux of the ions bombarding the channel wall can be reduced effectively. Due to the reduction in the bombardment of the wall from high-energy ions, the thrust and specific impulse greatly increase compared with those of the non-magnetically insulated anode. For anode mass flow rates of 0.3 and 0.35 mg s−1 and discharge voltages in the 100–200 V range, the thrust can be increased by more than 33% and the anode efficiency can be improved by more than 7%. Meanwhile, the length of the sputtering area is clearly reduced. The starting position of the sputtering area is in front of the magnetic pole, which can effectively prolong the service life of the thruster. [ABSTRACT FROM AUTHOR]

Poor performance limits the wider application of 100-W-power class Hall thrusters. The effects of position matching between the anode and the zero-magnetic-field region (ZMFR) on the discharge process and performance improvement of 100-W Hall thrusters were investigated. The experimental results demonstrate that appropriately widening the ZMFR downstream of the anode improves the ion current and thrust, promotes plume focusing, and optimizes thruster performance. The thrust and anode efficiency is enlarged by 7.6 % and 20 % (relative value), respectively, when the ZMFR downstream of the anode is expanded by 0.2 L (L is the channel length). The simulation results indicated that widening the ZMFR promoted the expansion of the high-ionization zone to the bottom of the channel, and increased the overall ionization rate. Moreover, as the ZMFR increases, the effective ion acceleration voltage increases. However, widening the ZMFR also aggravated the ion-wall interaction and reduced the propellant utilization rate. Therefore, the performance of the thrusters exhibited an optimal range as the length of the ZMFR increased. In addition, increasing the ZMFR did not affect the life of the thrusters. • The effects of position matching between the anode and zero magnetic field region on discharge characteristics are studied. • The discharge characteristic parameters of thruster with different lengths of ZMFR downstream of the anode are given. • Appropriately increasing the ZMFR can improve the ion current and thrust, thereby improving the anode efficiency. • The position matching between the anode and ZMFR affects the ionization process and propellant utilization ratio. [ABSTRACT FROM AUTHOR]