Search

Paper sludge biomass represents an underutilized feedstock rich in pulped and processed cellulose which is currently a waste stream with significant disposal cost to industry for landfilling services. Effective fractionation of the cellulose from paper sludge presents an opportunity to yield cellulose as feedstock for value-added processes. A novel approach to cellulose fractionation is the sidehill screening system, herein studied at the pilot-plant scale. Composition analysis determined ash removal and carbohydrate retention of both sidehill and high-performance benchtop screening systems. Sidehill screening resulted in greater carbohydrates retention relative to benchtop screening (90% vs 66%) and similar ash removal (95% vs 98%). Techno-economic analysis for production of sugar syrup yielded a minimum selling price of $331/metric ton of sugar syrup including disposal savings, significantly less than a commercial sugar syrup without fractionation. Sensitivity analysis showed that screening conditions played a significant role in economic feasibility for cellulosic yield and downstream processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Due to a shortage of resources, exploring new biomass fillers has become critical for paper making. In this study, we reported an eco-friendly strategy for fabricating low-cost and efficient recycled paper with high mechanical properties using corrugated cardboard waste paper and harmless municipal sludge (HMS). First, the characteristics of HMS, including the particle size, pH, specific surface area, organic functional groups and organic component content, were analyzed. Then, the influence of the amount of HMS on the properties of the recycled paper was studied. Finally, the strengthening mechanism of biomass filling recycled paper was discussed. The results showed that HMS, a biomass filler for recycled paper preparation, exhibited excellent physical and chemical properties, with a median particle size of 6.395 μm, a surface area of 39.974 m2 g−1 and organic functional groups. The tensile index of the recycled paper with 30 % HMS was 13.10 Nm/g, which was 16.4 % greater than that of the unfilled paper and showed better thermal stability. This excellent performance could be attributed to the uniform distribution of HMS on the fiber surface, which improved the accessibility of hydrogen bond formation between fibers. Thus, this study proved that HMS was an excellent biomass filler for producing recycled paper. [ABSTRACT FROM AUTHOR]

The main part of companies in Bulgaria are built, however in the 70s, and upgraded last decade. The country supplies around 80 % of its supplies of paper, paperboard and pulp with own production. Integrated treatment of wastes is a priority for realizing closed life cycle of materials. The aim of the present work is to investigate the composition and other important characteristics of biomass wood ash wasted from paper industry. The correlations and associations among the chemical characteristics are also studied to find some basic trends and important relationships between two similar wastes from different enterprises. It was proved that all samples taken contained Ba, Cr, Mn, Ni, Co, Al, Fe, Cu and Zn far below the legal limits for such type of products. A product has a certain anti-acidic effect. The other positive result was that the content of iron is between 34 to 60 mg per 1 kg dry waste. The microscopic photos confirmed that the particles are close to the nano-size materials. The content of the elements C, N, H is in good quantities and ratios, which is a prerequisite for their use as a soil improver. By the results of this study, it was confirmed that all samples produced as a result of the thermal treatment and final low water content achieved are free from pathogen microorganisms and different weed seeds, affecting the yield and soil sustainability. That allows determining the optimal ratio between the used components with a view to obtain products with desired thermal stability and physico-chemical properties as soil improvers. [ABSTRACT FROM AUTHOR]

The increase in energy valorization of paper sludge and biomass waste through incineration results in a rise in waste paper fly ash (WPFA), often perceived as hazardous and requiring specific treatment. In this study, natural carbonation technology at a pilot scale was employed to mitigate the hazardous nature of WPFA by enhancing the stabilization of metal and metalloid trace elements (MMTE), particularly barium (Ba) and lead (Pb) leaching. Natural carbonation of WPFA was found to be optimal at a water/solid ratio of 0.3 L/kg under natural temperature and humidity conditions. Batch leaching tests based on thermodynamic equilibrium were used to assess MMTE solubility concerning pH in both non-carbonated and carbonated WPFA at natural pH. After 7 days of natural carbonation, the leaching concentration of Ba and Pb was below the legal limit in France. The concentration of Ba and Pb in carbonated samples decreased by 98.5% and 98%, respectively. Analyses using thermogravimetry, X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy demonstrated the increased formation and quantity of calcite (CaCO3) with longer carbonation times, along with the formation of new minerals as BaCO3 and PbCO3, confirming the immobilization of these elements post-carbonation. The leaching behavior and release potential of carbonated WPFA were further evaluated using the four-stage sequential extraction procedure proposed by the European Commission's Bureau of Reference (BCR). The speciation of Ba and Pb shifted significantly from the soluble substance (F1) at 17.6% and 14.8%, respectively, to the carbonate fraction (F2) at 0.49% and 0.02% after 90 days of carbonation. The percolation water collected during the carbonation process adheres to discharge standards into the sea. [ABSTRACT FROM AUTHOR]

γ-Valerolactone (GVL) is a promising biomass-based platform compound that can be used for the removal of hemicellulose in pulp. In this study, a paper-grade pulp was treated using GVL to generate dissolving pulp for viscose production. The GVL concentration, treatment temperature, and reaction time had significant effect on the hemicellulose dissolution. The dissolving pulp with α-cellulose content of 92.3% and hemicellulose content of 5.45% was achieved with 60% GVL at 120 °C for 2 h. The Fock reactivity and intrinsic viscosity of the obtained dissolving pulp were 54.6% and 595 mL/g, which is comparable with the commercial product. In addition, GVL spent liquor was also recycled and reused to upgrade paper-grade pulp. By using purified recycled GVL to treat original pulp, the Fock reactivity of pulp was improved, and the cellulose content of as-prepared upgraded pulp increased to 92.1%, which was close to the cellulose content of dissolving pulp obtained from fresh GVL solution, while the intrinsic viscosity decreased significantly to 598 mL/g. Therefore, the efficient reuse of GVL not only ensured the high quality of dissolving pulp, but it also saved production costs and reduced environmental pollution.

This paper reports the continuous reductive amination of different molecules, including biomass-related compounds, over carbon-supported FeNi nanoparticles obtained on the basis of inexpensive and abundant metal precursors and cellulose. A biorefinery case study for the preparation of pyrrolidones via acid-catalyzed hydrolysis of glucose followed by reductive amination of the obtained levulinic acid is described., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This study aimed to investigate the impact of as-received biomass fly ashes (BFA) and green liquor dregs obtained from a pulp and paper plant in Brazil as substitutes for metakaolin in geopolymeric formulations. The properties of this type of waste material vary widely between different industrial plants. This study refrains from subjecting the waste materials to any form of pretreatment, taking into account their organic matter and particle size heterogeneity, requiring extensive characterization to evaluate their influence on the compressive strength, apparent open porosity, and water absorption of the geopolymeric samples. The objective was to assess their potential for upcycling purposes as an alternative to energy-intensive materials, such as ordinary Portland cement (OPC) and advanced ceramics. This potential arises from the ability of alkali-activated materials (AAM) to undergo curing at ambient temperatures, coupled with the possibility of compositions primarily derived from waste materials. To improve the sustainability of the products, the amorphous content of the raw material, which is more reactive than crystalline phases, was quantified and used as the base for mixture ratios. This approach aimed to reduce the requirement for alkaline activators, which have significant environmental impacts, while also increasing the waste content in the formulation. The incorporation of waste materials into the geopolymer matrix generally led to a reduction in the compressive strength compared to the benchmark metakaolin sample (19.4 MPa) but did not present a trend. The dregs led to values of 4.1 MPa at 25 wt% and 7.1 MPa at 50 wt%, a behavior that is somewhat counterintuitive, and BFA at 10 wt% presented 5.7 MPa. Nevertheless, the apparent open porosity remained at high levels for all the samples, close to 50%, and the compressive strength of most of them was over the values obtained for the metakaolin-only samples with mixture ratios calculated from the total composition instead of the amorphous composition. The decrease in strength and the increase in porosity were attributed to the specific characteristics of the waste materials, such as their high crystallinity, presence of organic matter, heterogeneous particle composition, and size. Overall, this study provides insight into the variations in geopolymerization based on the bulk and amorphous content of the aluminosilicate sources and how the characteristics of the waste materials influence the geopolymer matrix. It also highlights how calculating mixture ratios based on the amorphous composition improves the possibility of waste valorization through alkali activation. Additionally, it suggests that BFA and dregs might be effectively utilized in applications other than OPC substitution, such as adsorption, filtration, and catalysis. [ABSTRACT FROM AUTHOR]

Due to discharge of hazardous organochlorine compounds and absorbable organic halogen compounds in the effluent, the pulp and paper industries are trying to alter the bleaching process to limit the use of chlorine compounds and comply with regulatory, environmental, and market demands. With progress in biotechnology, enzyme technologies can effectively pre-treat lignocellulosic biomass in the pulp and paper making process. Usually, these enzymatic processes reduce the environmental impact of traditional pulp and paper-making processes, lower the overall production cost, and enhance product quality. Microbial xylanases are the potential bio-bleaching candidate due to their renewable, mild operating, highly specific, and eco-friendly nature. Xylanase enhances the efficacy of the bleaching process by breaking the β-1, 4-glycosidic backbone of the re-precipitated xylan network and removing the trapped lignin from the pulp fibers. Xylanolytic action positively influences the kappa number, hexenuronic acid, chromophore compounds release, pulp crystallinity, morphology and many other attributes of pulp. The present review comprehensively highlights the microbial xylanolytic system, its mechanism, and its application in pulp bioleaching. With the recent development, the paper delineates the xylanase-aided bleaching effects on pulp, paper, and effluent attributes aimed to reduce bleaching chemical use, AOX formation, and energy use in the pulp refining process. [ABSTRACT FROM AUTHOR]

Petroleum-based plastics, such as PP, PE, PVC, etc., have become an important source of environmental pollution due to their hard degradation, posing a serious threat to the human health. Isolating nanocellulose from abundant biomass waste resources and further integrating the nanocellulose into hydrophobic transparent film (i.e., nanopaper), to replace the traditional nondegradable plastic film, is of great significance for solving the problem of environmental pollution and achieving sustainable development of society. This study respectively extracted nanocellulose from the branches of Amorpha fruticosa Linn., wheat straw, and poplar residues via combined mechanical treatments of grinding and high-pressure homogenization. Among them, the nanocellulose derived from the Amorpha fruticosa has a finer structure, with diameter of about 10 nm and an aspect ratio of more than 500. With the nanocellulose as building block, we constructed hydrophilic nanopaper with high light transmittance (up to 90%) and high mechanical strength (tensile strength up to 110 MPa). After further hybridization by incorporating nano-silica into the nanopaper, followed by hydrophobic treatment, we built hydrophobic nanopaper with transmittance over 82% and a water contact angle of about 102° that could potentially replace transparent plastic film and has wide applications in food packaging, agricultural film, electronic device, and other fields.

The aim of the study was to grow microalgae on mixed municipal and industrial wastewater to simultaneously treat the wastewater and produce biomass and lipids. All algal strains grew in all wastewater mixtures; however, Selenastrum minutum had the highest biomass and lipids yields, up to 37% of the dry matter. Nitrogen and phosphorus removal were high and followed a similar trend in all three strains. Ammonium was reduced from 96% to 99%; this reduction was due to algal growth and not to stripping to the atmosphere, as confirmed by the amount of nitrogen in the dry algal biomass. Phosphate was reduced from 91% to 99%. In all strains used the lipid content was negatively correlated to the nitrogen concentration in the algal biomass. Mixtures of pulp and paper wastewater with municipal and dairy wastewater have great potential to grow algae for biomass and lipid production together with effective wastewater treatment., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Remediation of engineered-nanomaterials is an up-coming major environmental concern. This study demonstrates adsorptive-remediation of cobalt oxide nanoparticles (CoO NPs) from the water. The α-cellulose-fibers were extracted from waste-paper biomass (WP-αCFs) and magnetized with Fe 3 O 4 NPs (M-WP-αCFs). The XRD, FT-IR, and TGA were performed for detailed characterization of the newly developed bioadsorbent. The M-WP-αCFs was then applied for adsorptive remediation of CoO NPs. The adsorptive kinetics of CoO NPs adsorption onto the M-WP-αCFs reveals the pseudo-second-order model. The various adsorption isotherm studies revealed Langmuir is a best-fit isotherm. A prominently high adsorption capacity q m (1567 mg/g) corroborated extraordinary adsorptive potential of M-WP-αCFs. Furthermore, CoO NPs were adsorbed onto M-WP-αCFs were analyzed by the XPS, VSM, and TEM. Therefore, this study gave rise WP biomass extracted and rapidly-separable nano-biocomposite of 'M-WP-αCFs' with a high-capacity for CoO NPs remediation and can be further applied in remediation of several other engineered-nanomaterials., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The use of waste wood as an energy carrier has increased during the last decade. However, elevated levels of alkali metals and chlorine in waste wood compared to virgin biomass can cause increased deposit formation and higher concentrations of organic pollutants. In this study, we investigated the effect of the ChlorOut technique on concentrations of organic pollutants. Ammonium sulfate was injected into the combustion system to inhibit formation of KCl (which causes deposits) and persistent organic pollutants, namely polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs). The results showed that concentrations of the toxic congeners of PCDD, PCDF and PCB decreased in the presence of ammonium sulfate., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In order to identify faster-growing non-woody species usable for biomass and paper production, four Leucaena species (L.diversifolia, L. colinsii, L. salvadorensis and three varieties of L. leucocephala) were tested. All the Leucaena species showed a good soil and climatic adaptation to Spain Southwest except for L. salvadorensis. Studied Leucaena species showed biomass productivity ranges from 67.14 to 9.44 t ha(-1) (o.d.b.) and 43.6 to 11.4 t ha(-1) under Mediterranean conditions for the first and second year sprouts, respectively. The quantity of solubles and extractives shows similar values when compared with wood materials. Relatively lower lignin content in Leucaena (from 15.7% to 21.4%) species has been found with respect to other vegetal species. The alpha-cellulose contents (39.4-45.3%) are in the range of the normal values expected for the other non-wood raw materials. The study confirms the feasibility of organocell yield pulping process to Leucaena species. Organocell process provides an efficient delignification (kappa number 12.4 and pulp yield 42.2%) for L. leucocephala and suitably physical characteristics of paper sheet (tensile index 20.3 kNm/kg for L. diversifolia).

In order to identify faster-growing non-woody species usable for biomass and paper production, four Tagasastes (Chamaecytisus proliferus) from different origins are tested. All the Tagasaste species (T. Huelva, T. Australia, T. New Zealand and T. La Palma island) show a good soil and climatic adaptation to Southwest Spain. The studied Tagasaste provenances shows biomass productivity ranges from 1.0 t ha(-1)yr(-1) to 3.4 th a(-1)yr(-1) (o.d.b.) and 25.3 t ha(-1)yr(-1) to 49.4 t ha(-1)yr(-1) under Mediterranean conditions for first and second year sprouts, respectively. The quantity of solubles and extractives shows similar values when compared with wood materials. A relatively lower lignin content in Tagasaste (from 13.7% to 17.1%) species has been found with respect to other vegetal species. The alpha-celullose contents (43.6-45.3%) were in the range of the normal values expected for the other non-wood raw materials. The study confirms the feasibility of the organocell yield pulping process to Tagasaste provenances. Organocell processes provide an efficient delignification (kappa index from 7.2 to 10.9 and pulp yield from 43.6% to 54.1%). The best results are obtained for the physical properties of paper sheets for Tagasaste from Australia in the second year, with values of tensile index of 16.0 kNm/kg, burst index of 1.12 MPa m2/kg and tear index of 0.55 Nm2/kg.

Pines play a significant role in forest biodiversity globally and generate huge forest litter. Dry pine needles due to low ignition temperature and high frictional force with the ground catch fire quickly. Annual forest fires in the northern states of India greatly impact the Indian economy besides causing huge loss to biodiversity, livelihood, and environment. Pine needles are also considered unfit for fodder consumption due to presence of tannins. Although the presence of softwood lignin in pine needles makes it difficult to degrade easily, the presence of holocellulose (68.5%) containing 45-51% cellulose makes this biomass a potential substrate to be used in pulp-making industries for low-grade paper sheets. The good fiber length of pine needles (1.3-1.4 mm) with a diameter of 30-32 μm, maybe considered important property for paper making. The use of pine needles in the pharmaceutical and food industries are due to the presence of secondary metabolites (α-pinene, β-pinene, caryophyllene etc.). The various other potential applications of pine needles are for producing bio-ethanol (yield, 3.98%; purity, 94%), biogas (yield, 23.1 L kg -1 ), smokeless briquettes (calorific value, 18.77 MJ kg -1 ), biochar (calorific value, 25.6 MJ kg -1 ), bio-composites (tensile strength, 21-60 MPa), and bio-pesticides. This paper comprehensively reviews the current applications of pine needles along with its future prospective applications that can have the dual advantage of providing employment opportunities to the people along with environmental protection., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The cultivation conditions for Rhizopus oryzae grown in synthetic medium and paper pulp spent sulfite liquor (SSL) were investigated to achieve high biomass and ethanol yields using shake flasks and bioreactors. The fungus assimilated the hexoses glucose, mannose and galactose, and the pentoses xylose and arabinose as well as acetic acid which are present in SSL. The assimilation of hexoses was faster than pentoses during cultivation in a synthetic medium. However, all sugars were assimilated concomitantly during growth in SSL supplemented with ammonium, magnesium, calcium, phosphate, sulfate and trace amounts of some other metal ions (SSL-S). The medium composition had an important influence on biomass yield. The highest biomass yields, viz. 0.18 and 0.43 g biomass/g sugar were obtained, when the cells were cultivated in shake flasks with a synthetic medium containing glucose as carbon and energy source and SSL-S, respectively. The corresponding yields in a bioreactor with more efficient aeration were 0.22 and 0.55 g/g. In addition to the biomass, ethanol, lactic acid, and glycerol were important extracellular metabolites of the cultivation with maximum yields of 0.37, 0.30 and 0.09 g/g, respectively. When the source of sugars in the medium was exhausted, the fungus consumed the metabolites produced, such that the liquid medium was depleted of potential oxidizable nutrients. In general, there was a direct competition between lactic acid and ethanol among the metabolites. Poor medium compositions and cultivation conditions resulted in higher yields of lactic acid, whereas the ethanol and biomass yields were higher in rich media. SSL-S supported good growth of mycelium and a high ethanol yield.

A positive effect of pulp and paper mill sludges as a rich source of organic substrates on soil properties was previously found for some types of sludge and soil. In this study, the effect of secondary pulp and paper sludge on water characteristics and thermal properties of Retisol, as well as the growth parameters of lettuce (Lactuca sativa L.), was tested on the basis of a pot experiment when watering plants with a 20 or 40% sludge solution. The sludge application enhanced plant growth with an increase in biomass accumulation of 21 and 53%, respectively, for 20 and 40% sludge treatments. When the sludge dose was increased from 0 to 40%, the number of leaves increased by 25%, and the leaf mass per area value increased by 42%. Due to the accumulation of more biomass in the shoots than in the roots, sludge causes a change in the allocation of plant biomass. A significant effect of the sludge application on soil particle and microaggregate sized compositions, as well as on the saturated soil hydraulic conductivity, was not found in this study. However, fitted soil water retention curves showed an increased soil water content in sludge-treated soil at all water content values exceeding field capacity. Secondary sludge application led to an increase in the saturated water content from 0.50 to 0.56 cm3 cm−3. The 40% sludge solution increased soil thermal conductivity from 0.92 to 0.98 W m−1 K−1 under saturated water content and from 0.83 to 0.92 W m−1 K−1 under field capacity. The thermal conductivity was higher in the sludge-treated than untreated soil due to a more pronounced positive effect of increased saturated water content than the negative effect of the increased organic matter content on heat transfer. The positive impact of secondary sludge application on both plant growth parameters and physical properties of Retisol, such as increased soil water-holding capacity and thermal conductivity coefficient confirms the possibility of using it to improve soil characteristics and plant productivity. [ABSTRACT FROM AUTHOR]

Abstract A wide variety of biomass is available all around the world. Most of the biomass exists as a by-product from manufacturing industries. Pulp and paper mills contribute to a higher amount of these biomasses mostly discarded in the landfills creating an environmental burden. Biomasses from other sources have been used to produce different kinds and grades of biomaterials such as those used in industrial and medical applications. The present review aims to investigate the availability of biomass from pulp and paper mills and show sustainable routes for the production of high value-added biomaterials. The study reveals that using conventional and integrated biorefinery technology the ample variety and quantity of waste generated from pulp and paper mills can be converted into wealth. As per the findings of the current review, it is shown that high-performance carbon fiber and bioplastic can be manufactured from black liquor of pulping waste; the cellulosic waste from sawdust and sludge can be utilized for the synthesis of CNC and regenerated fibers such as viscose rayon and acetate; the mineral-based pulping wastes and fly ash can be used for manufacturing of different kinds of biocomposites. The different biomaterials obtained from the pulp and paper mill biomass can be used for versatile applications including conventional, high performance, and smart materials. Through customization and optimization of the conversion techniques and product manufacturing schemes, a variety of engineering materials can be obtained from pulp and paper mill wastes realizing the current global waste to wealth developmental approach.

BACKGROUND: This work proposes the use of a simple, inexpensive method for the hydrothermal synthesis of fluorescent carbon dot nanoparticles (CDs) from rice starch aimed at the determination of Hg2+ in water. The proposed method involved using a paper‐based analytical device coupled to a 3D plate, with a UV‐LED chamber and a smartphone for the acquisition and analysis of the fluorescence digital images of the CDs. RESULTS: The size of the carbon dots ranged from 0.5 to 3 nm, with an average particle size of ~1 nm. The functionalization of carbon dots with methimazole allowed a high selective for Hg2+ determination. The results obtained showed a linear response R2 of 0.997 and Hg2+ concentration in the range of 0.5–45.0 μmol L−1 with a limit of detection and limit of quantitation of 0.23 and 0.62 μmol L−1, respectively. The results of the study show that there were no significant differences, at 95% confidence level, between the data obtained from the application of the proposed method and the reference method. CONCLUSION: The proposed method is in line with the principles of green chemistry, as it involves the use of renewable sources for starch extraction and a hydrothermal synthesis process that does not employ toxic reagents. In addition, the method employs only 15 μL reagent/sample. © 2024 Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

Dried leaves are a potential source of energy although these are not commonly used beside to satisfy daily energy demands in rural areas. This paper aims at preparing a leafy biomass feedstock in the form of briquettes which can be directly used for combustion or to extract the combustible gas using a gasifier. Teak (Tectona grandis) and rubber (Hevea brasiliensis) leaves are considered for the present study. A binder-assisted briquetting technique with tapioca starch as binder is adopted. Properties of these leafy biomass briquettes such as moisture content, calorific value, compressive strength, and shatter index are determined. From the study, briquettes with biomass-to-binder ratio of 3:5 are found to be stable. Higher mass percentage of binder is considered for preparation of briquettes due to the fact that leafy biomasses do not adhere well on densification with lower binder content. Ultimate analysis test is conducted to analyze the gasification potential of the briquettes. Results show that the leafy biomass prepared from teak and rubber leaves has calorific values of 17.5 and 17.8 MJ/kg, respectively, which are comparable with those of existing biomass feedstock made of sawdust, rice husk, and rice straw.

A positive effect of pulp and paper mill sludges as a rich source of organic substrates on soil properties was previously found for some types of sludge and soil. In this study, the effect of secondary pulp and paper sludge on water characteristics and thermal properties of Retisol, as well as the growth parameters of lettuce (Lactuca sativa L.), was tested on the basis of a pot experiment when watering plants with a 20 or 40% sludge solution. The sludge application enhanced plant growth with an increase in biomass accumulation of 21 and 53%, respectively, for 20 and 40% sludge treatments. When the sludge dose was increased from 0 to 40%, the number of leaves increased by 25%, and the leaf mass per area value increased by 42%. Due to the accumulation of more biomass in the shoots than in the roots, sludge causes a change in the allocation of plant biomass. A significant effect of the sludge application on soil particle and microaggregate sized compositions, as well as on the saturated soil hydraulic conductivity, was not found in this study. However, fitted soil water retention curves showed an increased soil water content in sludge-treated soil at all water content values exceeding field capacity. Secondary sludge application led to an increase in the saturated water content from 0.50 to 0.56 cm3 cm−3. The 40% sludge solution increased soil thermal conductivity from 0.92 to 0.98 W m−1 K−1 under saturated water content and from 0.83 to 0.92 W m−1 K−1 under field capacity. The thermal conductivity was higher in the sludge-treated than untreated soil due to a more pronounced positive effect of increased saturated water content than the negative effect of the increased organic matter content on heat transfer. The positive impact of secondary sludge application on both plant growth parameters and physical properties of Retisol, such as increased soil water-holding capacity and thermal conductivity coefficient confirms the possibility of using it to improve soil characteristics and plant productivity.

Agricultural plantations in Indonesia and Malaysia yield substantial waste, necessitating proper disposal to address environmental concerns. Yet, these wastes, rich in starch and lignocellulosic content, offer an opportunity for value-added product development, particularly amino acid production. Traditional methods often rely on costly commercial enzymes to convert biomass into fermentable sugars for amino acid production. An alternative, consolidated bioprocessing, enables the direct conversion of agricultural biomass into amino acids using selected microorganisms. This review provides a comprehensive assessment of the potential of agricultural biomass in Indonesia and Malaysia for amino acid production through consolidated bioprocessing. It explores suitable microorganisms and presents a case study on using Bacillus subtilis ATCC 6051 to produce 9.56 mg/mL of amino acids directly from pineapple plant stems. These findings contribute to the advancement of sustainable amino acid production methods using agricultural biomass especially in Indonesia and Malaysia through consolidated bioprocessing, reducing waste and enhancing environmental sustainability., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

As globalization proceeds, increasing biomass energy consumption is an important pathway to replace fossil fuels for tackling climate change by reducing emissions. This study explores the spatial spillover effect in biomass energy carbon reduction, which is frequently ignored when investigating environmental factors. It uncovers whether globalization and its dimensions can strengthen the spatial effect of biomass energy carbon reduction. Besides, we reveal whether biomass energy consumption can promote CO 2 emissions reduction while ensuring economic progress. Results show that (1) owing to the spillover effect, biomass energy consumption plays a significant role in direct and indirect enhancing carbon emissions reduction, with their feedback effects of - 0.003 or 3.3% of the direct effect. (2) Increasing overall, social and political globalization enhances biomass energy consumption's carbon reduction effect. (3) In countries with higher economic development, overall, economic and political globalization has a better promotion in the spatial effect of biomass energy carbon reduction. (4) Developing biomass energy can support the environment quality while enhancing economic growth., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Recycled paper fiber rejects have shown potential as a source of waste-to-resource carbohydrates for renewable chemicals production. This study examined three classes of recycled paper fines (old corrugated containers, old newspaper, and mixed office waste) and two industrial papermaking rejects streams from different recycling mills (one mill processes linerboard and the other old corrugated cardboard). The effect of chemical pretreatment using dilute sodium hydroxide, hot water and dilute sulfuric acid on enzymatic glucose and xylose yields was evaluated. Enzymatic hydrolysis results indicated that recycled fiber streams with more old corrugated cardboard have higher potential to produce carbohydrates. The recycled cardboard rejects produced more glucose and xylose per kilogram of rejects than the linerboard rejects under all untreated and pretreated conditions. The highest producing rejects sample was sodium hydroxide pretreated cardboard rejects with 373 g glucose and 61 g xylose produced per kilogram of rejects. However, a simple hot water pretreatment showed similar results, with 335 g glucose and 58 g xylose produced per kilogram of rejects. The hot water pretreatment is recommended due to its comparable yield and lower chemical addition.

The outbreak of coronavirus disease 2019 (COVID-19) has made a huge impact on the global industrial supply chains. Undoubtedly, COVID-19 is posing severe challenges to the pulp and paper industry worldwide. On the other hand, this pandemic may provide unprecedented possibilities for the pulp and paper manufacturers in areas such as the increasing demand for personal hygiene paper products, food packaging products, corrugated packaging materials, medical specialty papers, etc. [ABSTRACT FROM AUTHOR]

Treating ground bagasse or Southern yellow pine in the biodegradable ionic liquid (IL), choline acetate ([Cho][OAc]), at 100°C for 24h led to dissolution of hemicellulose and lignin, while leaving the cellulose pulp undissolved, with a 54.3% (bagasse) or 34.3% (pine) reduction in lignin content. The IL solution of the dissolved biopolymers can be separated from the undissolved particles either by addition of water (20 wt% of IL) followed by filtration or by centrifugation. Hemicellulose (19.0 wt% of original bagasse, 10.2 wt% of original pine, containing 14-18 wt% lignin) and lignin (5.0 wt% of original bagasse, 6.0 wt% of original pine) could be subsequently precipitated. The pulp obtained from [Cho][OAc] treatment can be rapidly dissolved in 1-ethyl-3-methylimidazolium acetate (e.g., 17 h for raw bagasse vs. 7h for pulp), and precipitated as cellulose-rich material (CRM) with a lower lignin content (e.g., 23.6% for raw bagasse vs. 10.6% for CRM)., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

The co-pyrolysis of paper mill sludge (PS) and biomass has attracted significant attention due to its potential for simultaneous resource utilization and waste disposal. In this work, the co-pyrolysis of PS with corn stover (CS) was carried out in a fixed bed reactor to investigate the effect of temperature and PS to CS ratio on the product characteristics. A comparison between the experimental and calculated values of product yield and composition was performed to obtain a deeper understanding of the synergistic interactions. The results exhibited a positive synergistic effect on bio-oil production at lower CS proportions with higher temperatures. Higher temperatures and lower CS proportions were favorable for the formation of aromatics (up to 45.03%) in co-pyrolysis, while the synergistic interactions promoted the production of phenols and exhibited an inhibitory effect on aromatics production. The interactions also inhibited H 2 but promoted CO production due to the enhanced decarbonylation of co-pyrolysis intermediates in the presence of PS internal minerals. Additionally, the characterization of biochars indicated an increasing degree of aromaticity with higher temperatures and CS proportions. The synergistic interactions at higher temperatures facilitated the development of pore structures in the biochar, especially micropores. This study provides valuable insights into the relationship between parameters, products, and synergies in the co-pyrolysis of PS and biomass wastes. [Display omitted] • A comprehensive study on the co-pyrolysis of paper sludge and corn stover was conducted. • Lower corn stover ratios with higher temperatures jointly promoted bio-oil yield. • The formation of phenols and CO was synergistically enhanced during co-pyrolysis. • Higher temperatures facilitated the development of micropores in the biochars. [ABSTRACT FROM AUTHOR]

As the tragedy in Ukraine deepens, it's clear that the world should end its dependency on Russian oil. It will be ironic, however, if nations disentangling themselves from this compromised energy source instead turn to another energy source with destructive impacts: harvesting and burning forest wood for fuel, which increases carbon emissions compared to fossil fuels, and degrades forests. [ABSTRACT FROM AUTHOR]

The goal of this study is to evaluate the feasibility of PHA biosynthesis from kraft mill effluent using the batch system evaluating the biomass origin and C:N relationship influence. To evaluate feasibility, batch assays were carried out. Also, two levels of the BOD5:N:P relationship (100:5:1 and 100:1:0.2) and three different sludge origins were considered. Inocula were obtained from activated sludge treatment plants for a) sewage (SAS), b) paper mill (PAS) and c) kraft (KAS). The results show that the maximum Biological Oxygen Demand (BOD5) and Chemical Oxygen Demand (COD) removal was 80.5% and 59.7% respectively using KAS as inoculum. In these assays, kinetics constants were 17.9±3.2 mg L(-1) and 46.5±1.2 d(-1) for (KCOD) and (rmax), respectively under a BOD5:N:P relationship of 100:5:1. The maximum PHA accumulation was obtained under a BOD5:N:P relationship of 100:1:0.2 on the third day of batch assays using PAS sludge with 25.72% of the cells accumulating PHA and on the fifth day in batch using SAS and KAS sludge with 25.85% and 30.40% of cells accumulating PHA, respectively. Yields obtained for the 100:1:0.2 relationships ranged from 0.10-0.14 mg PHA mg(-1) COD.

Lignocellulose material is the main natural resource for the pulp and paper industry, and for its application the material should have a degree of whiteness as high as possible. For this reason, different bleaching treatments were applied during time. In this paper, the photobleaching induced by solar light of a lignocellulosic biomass using NaClO was studied. The colorimetric measurements, UV spectra absorption, and FTIR spectra changes are evaluated and discussed in this paper. The changes of L*a*b parameters can be considered a proof of the reactions generated by hypochlorite radicals during solar light exposure, leading to a biomass whitening. [ABSTRACT FROM AUTHOR]

Earth's most recent major extinction episode, the Quaternary Megafauna Extinction, claimed two-thirds of mammal genera and one-half of species that weighed >44 kg between approximately 50,000 and 3,000 years ago. Estimates of megafauna biomass (including humans as a megafauna species) for before, during, and after the extinction episode suggest that growth of human biomass largely matched the loss of non-human megafauna biomass until approximately 12,000 years ago. Then, total megafauna biomass crashed, because many non-human megafauna species suddenly disappeared, whereas human biomass continued to rise. After the crash, the global ecosystem gradually recovered into a new state where megafauna biomass was concentrated around one species, humans, instead of being distributed across many species. Precrash biomass levels were finally reached just before the Industrial Revolution began, then skyrocketed above the precrash baseline as humans augmented the energy available to the global ecosystem by mining fossil fuels. Implications include (i) an increase in human biomass (with attendant hunting and other impacts) intersected with climate change to cause the Quaternary Megafauna Extinction and an ecological threshold event, after which humans became dominant in the global ecosystem; (ii) with continued growth of human biomass and today's unprecedented global warming, only extraordinary and stepped-up conservation efforts will prevent a new round of extinctions in most body-size and taxonomic spectra; and (iii) a near-future biomass crash that will unfavorably impact humans and their domesticates and other species is unavoidable unless alternative energy sources are developed to replace dwindling supplies of fossil fuels.

Pesticide residues are a serious problem towards agriculture, environment and food safety, so it is highly desirable to develop a swift, efficient and portable pesticide detection method. A fluorescence visual sensing method for glyphosine based on a nitrogen-doped biomass carbon quantum dot (N-CQD) paper-based sensor was developed. The fluorescence signal was quenched by Fe3+ in a static quenching process, and then the fluorescence of N-CQDs was recovered after adding glyphosine. Under the optimal experimental conditions and when tested with a fluorescence spectrofluorometer, the detection of glyphosine showed a two-stage linear pattern in the range of 0.1–0.6 μM and 0.6–1.6 μM with a detection limit of 0.075 μM. Then, the RGB values of different concentrations of glyphosine on the filter paper chip were detected by the software of the smartphone-color identifier. The logarithm of the glyphosine concentration was linearly related to the G value of RGB in the range of 0.25–10.00 mM and with a detection limit of 0.15 mM. The method was applied to measuring glyphosine-spiked juice and flour samples, and the recovery rates were 87.60–112.69% and 93.27–105.83%, respectively. The proposed N-CQDs/Fe3+ system had wide applications, and it was expected to be fast and effective at detecting pesticide residues. [ABSTRACT FROM AUTHOR]