Search

All-GaN-integrated cascode heterojunction field effect transistors were designed and fabricated for power switching applications. A threshold voltage of +2 V was achieved using a fluorine treatment and a metal–insulator–semiconductor gate structure on the enhancement mode part. The cascode device exhibited an output current of 300 mA/mm by matching the current drivability of both enhancement and depletion mode parts. The optimization was achieved by shifting the threshold voltage of the depletion mode section to a more negative value with the addition of a dielectric layer under the gate. The switching performance of the cascode was compared to the equivalent GaN enhancement-mode-only device by measuring the hard switching speed at 200 V under an inductive load in a double pulse tester. For the first time, we demonstrate the switching speed advantage of the cascode over equivalent GaN enhancement-mode-only devices, due to the reduced Miller-effect and the unique switching mechanisms. These observations suggest that practical power switches at high power and high switching frequency will benefit as part of an integrated cascode configuration. [ABSTRACT FROM AUTHOR]

This paper presents a three-phase voltage-source 36-pulse converter that draws almost sinusoidal currents. The converter results from the combination of a series-connected 12-pulse voltage-source rectifier with a passive voltage-injection circuit and a bidirectional switch, referred to as hybrid injection. The voltage-injection circuit uses a single-phase rectifier bridge and a single-phase transformer. Both the voltage-injection circuit and the bidirectional switch operate at six times the supply frequency and have a low rating. In this paper, the converter operation is explained and analyzed. Subsequently, the converter is evaluated experimentally using a 4-kW 400-Hz prototype, where the THDI of the line currents was measured to be below 1.2%. [ABSTRACT FROM AUTHOR]

A combination of two, simple, passive injection circuits is used to eliminate virtually all the low-order harmonics from the line currents of a standard 12-pulse rectifier, transforming its performance into that of a 36-pulse system. A line current total harmonic distortion of 1.51% is achieved in a 15-kW, 400-Hz prototype. The basic 12-pulse rectifier comprises two 6-pulse bridges that are series connected on both the ac and dc sides along with a 50%-rated, delta-star, phase-shifting transformer, while each injection circuit principally consists of a small transformer that operates at six times the supply frequency and carries around 1% of the total power throughput. The injection techniques are also valid for a fully isolated transformer arrangement. Full details of the circuit operation and design are reported. [ABSTRACT FROM AUTHOR]

Presents a study that proposed a single-stage, three-phase alternating current-to-direct current converter topology for high-frequency power supply applications. Topology of the three-phase current injection; Principle of operation; System design and simulation; Experimental verification.