30 results on '"Weir, Michael D."'
Search Results
2. Core-shell nanostructures for improving dental restorative materials: A scoping review of composition, methods, and outcome.
- Author
-
Mokeem, Lamia Sami, Garcia, Isadora Martini, Shahkarami, Yasmin, Blum, Lauren, Balhaddad, Abdulrahman A., Collares, Fabrício Mezzomo, Williams, Mary Ann, Weir, Michael D., and Melo, Mary Anne S.
- Subjects
DENTAL materials ,DENTAL resins ,DENTAL adhesives ,OPERATIVE dentistry ,NANOSTRUCTURES - Abstract
Dental resin adhesives and composites are the most prevailing dental restorative materials used to treat cavitated tooth decay. These materials are challenged inside the mouth by bacterial acid attack, lack of bioactivity, and the scarcity of alternatives maintaining the mechanical properties over the lifetime service of these materials. Coreshell nanostructures are composed of various materials surrounded by a protective shell. They are acquiring considerable attention as innovative multipurpose carriers that show great potential in restorative dentistry. Herein, we systematically reviewed the recent studies on core-shell nanostructures incorporated into dental resinbased materials, their intended properties, synthesis methods, and assessment tests employed. This study used scoping review method, following Arksey and O'Malley's five stages framework using PubMed and Scopus (Elsevier) databases. From 149 initially identified manuscripts, 20 studies were eligible for full-text screening, and 15 were included for data extraction. The majority of included studies have used resin composite as parental material. Silica oxide was the most prevailing shell incorporated into dental resins. Almost all core-shell nanostructures were added to improve the material's strength and impart antibacterial properties. Designing strategies and drug release behaviors were discussed. In the end, current challenges and prospects in this promising field were highlighted. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
3. Novel low-shrinkage-stress bioactive nanocomposite with anti-biofilm and remineralization capabilities to inhibit caries.
- Author
-
Filemban, Hanan, Bhadila, Ghalia, Wang, Xiaohong, Melo, Mary Ann S., Oates, Thomas W., Weir, Michael D., Sun, Jirun, and Xu, Hockin H.K.
- Subjects
CARIOGENIC agents ,DENTAL adhesives ,DENTAL materials ,CALCIUM phosphate ,NANOCOMPOSITE materials ,STREPTOCOCCUS mutans ,URETHANE - Abstract
A common reason for dental composite restoration failure is recurrent caries at the margins. Our objectives were to: (1) develop a novel low-shrinkage-stress, antibacterial and remineralizing resin composite; (2) evaluate the effects of dimethylaminohexadecyl methacrylate (DMAHDM) on mechanical properties, biofilm inhibition, calcium (Ca) and phosphate (P) ion release, degree of conversion, and shrinkage stress on the new low-shrinkage-stress resin composite for the first time. The resin consisted of urethane dimethacrylate (UDMA) and triethylene glycol divinylbenzyl ether (TEG-DVBE) with high resistance to salivary hydrolytic degradation. Composites were made with 0%–8% of DMAHDM for antibacterial activity, and 20% of nanoparticles of amorphous calcium phosphate (NACP) for remineralization. Mechanical properties and Streptococcus mutans biofilm growth on composites were assessed. Ca and P ion releases, degree of conversion and shrinkage stress were evaluated. Adding 2–5% DMAHDM and 20% NACP into the low-shrinkage-stress composite did not compromise the mechanical properties (p > 0.05). The incorporation of DMAHDM greatly reduced S. mutans biofilm colony-forming units by 2–5 log and lactic acid production by 7 folds, compared to a commercial composite (p < 0.05). Adding 5% DMAHDM did not compromise the Ca and P ion release. The low-shrinkage-stress composite maintained a high degree of conversion of approximately 70%, while reducing the shrinkage stress by 37%, compared to a commercial control (p < 0.05). The bioactive low-shrinkage-stress composite reduced the polymerization shrinkage stress, without compromising other properties. Increasing the DMAHDM content increased the antibacterial effect in a dose-dependent manner. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
4. Evaluation of the ability of adhesives with antibacterial and remineralization functions to prevent secondary caries in vivo.
- Author
-
Liu, Yifang, Yang, Jiaojiao, Yang, Yingming, Li, Meng, Xu, Hockin H. K., Weir, Michael D., Zhou, Xuedong, Liang, Kunneng, and Li, Jiyao
- Subjects
CARIOGENIC agents ,DENTAL adhesives ,ADHESIVES ,DENTAL bonding ,REMINERALIZATION (Teeth) ,DENTAL fillings ,X-ray computed microtomography - Abstract
Objective: The bonding interface of dental filling therapy is the weak point in resisting secondary caries. Adhesives containing nanoparticles of amorphous calcium phosphate (NACP) and dimethylaminohexadecyl methacrylate (DMAHDM) have been demonstrated in vitro to prevent bacteria from producing acid and to promote tooth remineralization. The present study aimed to evaluate the efficacy of adhesive with NACP and DMAHDM to prevent secondary caries in vivo. Materials and methods: Artificial cavities were created on the first molar on both sides of the maxillary in a rat model. One side was treated with adhesive containing NACP + DMAHDM, while on the other side, a commercial adhesive served as control. After 24 days of cariogenic feeding, the degree of secondary caries was evaluated by micro-CT and a modified Keyes scoring method. Quantitative real-time PCR (qPCR) and colony-forming unit (CFU) counts were used to evaluate the antibacterial efficacy of the materials. Biocompatibility was also investigated. Results: In the rat model, the adhesive with NACP + DMAHDM showed excellent biocompatibility and effectively decreased the amount of bacteria. The experimental group demonstrated excellent remineralization effectiveness, with a lower modified Keyes score and mineral loss of 34.16 ± 2.13 vol% μm, compared with 77.44 ± 7.22 vol% μm in the control group, according to micro-CT (P < 0.05), showing excellent capacity to inhibit secondary caries. Conclusions: The NACP-DMAHDM-containing adhesive exhibited good performance in preventing secondary caries in vivo. Clinical relevance: Adhesives containing NACP and DMAHDM have great potential for use in clinical dentistry to prevent secondary caries by inhibiting bacterial growth and promoting remineralization. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
5. Magnetic motion of superparamagnetic iron oxide nanoparticles- loaded dental adhesives: physicochemical/biological properties, and dentin bonding performance studied through the tooth pulpal pressure model.
- Author
-
Garcia, Isadora Martini, Balhaddad, Abdulrahman A., Lan, Yucheng, Simionato, Andressa, Ibrahim, Maria Salem, Weir, Michael D., Masri, Radi, Xu, Hockin H.K., Collares, Fabrício Mezzomo, and Melo, Mary Anne Samapio
- Subjects
DENTAL adhesives ,FERRIC oxide ,IRON oxide nanoparticles ,DENTIN ,TENSILE strength ,DENTAL glass ionomer cements ,TEETH ,DENTAL bonding - Abstract
The limited durability of dentin bonding harshly shortens the lifespan of resin composites restorations. The controlled, dynamic movement of materials through non-contacting forces provides exciting opportunities in adhesive dentistry. We, herein, describe comprehensive investigations of a new dental adhesive with superparamagnetic iron oxide nanoparticles (SPIONs) sensitive to magnetic fields for bonding optimization. This contribution outlines a roadmap of (1) designing and tuning of an adhesive formulation containing SPIONs to enhance penetrability into etched dentin guided by magnetic-field; (2) employing a clinically relevant model of simulated hydrostatic pulpal pressure on the microtensile bond to dentin; and (3) investigating a potential antibacterial effect of the formulated adhesives, and their biocompatibility. SPION-concentration-dependency chemical and mechanical behavior was shown via the degree of conversion, ultimate tensile strength, and micro shear bond strength to dentin. The effects of SPIONs carried on a dental adhesive on the bonding strength to dentin are studied in depth by combining experiments with in vitro simulated model. The results show that under the guided magnetic field, 0.07 wt.% of SPIONs-doped adhesive increased the bond strength that surpasses the reduction caused by hydrostatic pulpal pressure. Using a magnetic guide workflow during the bonding procedures, SPIONs-doped adhesives improved dentin's adhesion without changing adhesives' physicochemical properties. This outcome addresses the key challenge of poor resin infiltration of dentin's conventional total etching during the bonding procedure. The real-time magnetic motion of dental adhesives may open new paths to enhance resin-based restorations' longevity. In this study, dental adhesives containing superparamagnetic iron oxide nanoparticles (SPIONs) were developed to enhance penetrability into dentin guided by a magnetic field. The adhesives were screened for physical, chemical, antibacterial properties, and cytotoxicity. For the first time, simulated pulpal pressure was used concurrently with the magnetic field to simulate a clinical setting. This approach showed that it is feasible to overcome pulpal pressure jeopardization on bond strength when SPIONs and a magnetic field are applied. The magnetic-responsive adhesives had great potential to improve bond strength, opening new paths to enhance resin-based restorations' longevity without affecting adhesives' biological properties. The use of magnetic-responsive particles and magnetically assisted motion is a promising strategy to improve the sealing ability of dental adhesives. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
6. Remineralization effectiveness of adhesive containing amorphous calcium phosphate nanoparticles on artificial initial enamel caries in a biofilm-challenged environment.
- Author
-
Fan, Menglin, Yang, Jiaojiao, Xu, Hockin H. K., Weir, Michael D., Tao, Siying, Yu, Zhaohan, Liu, Yifang, Li, Meng, Zhou, Xuedong, Liang, Kunneng, and Li, Jiyao
- Subjects
CARIOGENIC agents ,DENTAL adhesives ,CALCIUM phosphate ,STREPTOCOCCUS mutans ,ADHESIVES ,MICROHARDNESS testing ,DENTAL caries - Abstract
Objectives: Dental caries is closely associated with acid-producing bacteria, and Streptococcus mutans is one of the primary etiological agents. Bacterial accumulation and dental demineralization lead to destruction of bonding interface, thus limiting the longevity of composite. The present study investigated remineralization effectiveness of adhesive containing nanoparticles of amorphous calcium phosphate (NACP) in a stimulated oral biofilm environment. Methods: The enamel blocks were immersed in demineralization solution for 72 h to imitate artificial initial carious lesion and then subjected to a Streptococcus mutans biofilm for 24 h. All the samples then underwent 4-h demineralization in brain heart infusion broth with sucrose (BHIS) and 20-h remineralization in artificial saliva (AS) for 7 days. The daily pH of BHIS after 4-h incubation, lactic acid production, colony-forming unit (CFU) count, and content of calcium (Ca) and phosphate (P) in biofilm were evaluated. Meanwhile, the remineralization effectiveness of enamel was analyzed by X-ray diffraction (XRD), surface microhardness testing, transverse microradiography (TMR) and scanning electron microscopy (SEM). Results: The NACP adhesive released abundant Ca and P, achieved acid neutralization, reduced lactic acid production, and lowered CFU count (P < 0.05). Enamel treated with NACP adhesive demonstrated the best remineralization effectiveness with remineralization value of 52.29 ± 4.79% according to TMR. Better microhardness recovery of cross sections and ample mineral deposits were also observed in NACP group. Conclusions: The NACP adhesive exhibited good performance in remineralizing initial enamel lesion with cariogenic biofilm. Significance: The NACP adhesive is promising to be applied for the protection of bonding interface, prevention of secondary caries, and longevity prolonging of the restoration. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
7. Effect of co-precipitation plus spray-drying of nano-CaF2 on mechanical and fluoride properties of nanocomposite.
- Author
-
Dai, Quan, Weir, Michael D., Ruan, Jianping, Liu, Jin, Gao, Jianghong, Lynch, Christopher D., Oates, Thomas W., Li, Yuncong, Chang, Xiaofeng, and Xu, Hockin H.K.
- Subjects
- *
SPRAY drying , *COPRECIPITATION (Chemistry) , *WATER immersion , *NANOCOMPOSITE materials , *DENTAL fillings , *DENTAL adhesives , *TOOTHPASTE - Abstract
Fluoride (F)-releasing restoratives typically are either weak mechanically or release only low levels of F ions. The objectives of this study were to: (1) develop a novel photo-cured nanocomposite with strong mechanical properties and high levels of sustained F ion release via a two-step "co-precipitation + spray-drying" technique to synthesize CaF 2 nanoparticles (nCaF 2); and (2) investigate the effect of spray-drying treatment after co-precipitation of nCaF 2 on mechanical properties and F ion release of composite. Two types of CaF 2 particles were synthesized: A co-precipitation method yielded CaF 2 cp; "co-precipitation + spray-drying" yielded nCaF 2 cpsd. Composites were fabricated with fillers of: (1) 0% CaF 2 + 70% glass; (2) 10% CaF 2 cp + 60% glass; (3) 15% CaF 2 cp + 55% glass; (4) 20% CaF 2 cp + 50% glass; (5) 10% nCaF 2 cpsd + 60% glass; (6) 15% nCaF 2 cpsd + 55% glass; and (7) 20% nCaF 2 cpsd + 50% glass. A commercial F-releasing nanocomposite served as control. The nCaF 2 cpsd had much smaller particle size (median = 32 nm) and narrower distribution (22–57 nm) than CaF 2 cp (median = 5.25 μm, 162 nm–67 μm). The composite containing nCaF 2 cpsd had greater flowability, flexural strength, elastic modulus and hardness than CaF 2 cp composite and commercial control composite. At 84-day immersion in water, the nanocomposites containing 20% nCaF 2 cpsd had 65 times higher cumulative F release, and 77 times greater long-term F-release rate, than commercial control. A novel two-step "co-precipitation + spray-drying" technique of synthesizing nCaF 2 was developed. The photo-cured nanocomposite containing 20% nCaF 2 cpsd possessed strong mechanical properties and excellent long-term F-release ability, and hence is promising for dental restoration applications to inhibit secondary caries. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
8. Emerging Contact-Killing Antibacterial Strategies for Developing Anti-Biofilm Dental Polymeric Restorative Materials.
- Author
-
Mitwalli, Heba, Alsahafi, Rashed, Balhaddad, Abdulrahman A., Weir, Michael D., Xu, Hockin H. K., and Anne S. Melo, Mary
- Subjects
DENTAL materials ,DENTAL adhesives ,BACTERIAL adhesion ,POLYMER structure ,ROOT canal treatment ,BACTERIAL growth - Abstract
Polymeric materials are the first choice for restoring tooth cavities, bonding tooth-colored fillings, sealing root canal systems, and many other dental restorative applications. However, polymeric materials are highly susceptible to bacterial attachment and colonization, leading to dental diseases. Many approaches have been investigated to minimize the formation of biofilms over polymeric restorative materials and at the tooth/material interfaces. Among them, contact-killing compounds have shown promising results to inhibit dental biofilms. Contact-killing compounds can be immobilized within the polymer structure, delivering a long-lasting effect with no leaching or release, thus providing advantages compared to release-based materials. This review discusses cutting-edge research on the development of contact-killing compounds in dental restorative materials to target oral pathogens. Contact-killing compounds in resin composite restorations, dental adhesives, root canal sealers, denture-based materials, and crown cements have all demonstrated promising antibacterial properties. Contact-killing restorative materials have been found to effectively inhibit the growth and activities of several oral pathogens related to dental caries, periodontal diseases, endodontic, and fungal infections. Further laboratory optimization and clinical trials using translational models are needed to confirm the clinical applicability of this new generation of contact-killing dental restorative materials. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
9. Novel Protein-Repellent and Antibacterial Resins and Cements to Inhibit Lesions and Protect Teeth.
- Author
-
Cao, Li, Wu, Junling, Zhang, Qiang, Baras, Bashayer, Bhadila, Ghalia, Li, Yuncong, Melo, Mary Anne S., Weir, Michael D., Bai, Yuxing, Zhang, Ning, and Xu, Hockin H. K.
- Subjects
DENTAL enamel ,DENTAL adhesives ,DENTAL resins ,REMINERALIZATION (Teeth) ,DENTAL cements ,TOOTH demineralization ,TEETH - Abstract
Orthodontic treatment is increasingly popular as people worldwide seek esthetics and better quality of life. In orthodontic treatment, complex appliances and retainers are placed in the patients' mouths for at least one year, which often lead to biofilm plaque accumulation. This in turn increases the caries-inducing bacteria, decreases the pH of the retained plaque on an enamel surface, and causes white spot lesions (WSLs) in enamel. This article reviews the cutting-edge research on a new class of bioactive and therapeutic dental resins, cements, and adhesives that can inhibit biofilms and protect tooth structures. The novel approaches include the use of protein-repellent and anticaries polymeric dental cements containing 2-methacryloyloxyethyl phosphorylcholine (MPC) and dimethylaminododecyl methacrylate (DMAHDM); multifunctional resins that can inhibit enamel demineralization; protein-repellent and self-etching adhesives to greatly reduce oral biofilm growth; and novel polymethyl methacrylate resins to suppress oral biofilms and acid production. These new materials could reduce biofilm attachment, raise local biofilm pH, and facilitate the remineralization to protect the teeth. This novel class of dental resin with dual benefits of antibacterial and protein-repellent capabilities has the potential for a wide range of dental and biomedical applications to inhibit bacterial infection and protect the tissues. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
10. Anti-Caries Effects of Dental Adhesives Containing Quaternary Ammonium Methacrylates with Different Chain Lengths.
- Author
-
Qi Han, Bolei Li, Xuedong Zhou, Yang Ge, Suping Wang, Mingyun Li, Biao Ren, Haohao Wang, Keke Zhang, Xu, Hockin H. K., Xian Peng, Mingye Feng, Weir, Michael D., Yu Chen, and Lei Cheng
- Subjects
DENTAL adhesives ,QUATERNARY ammonium compounds ,METHACRYLATES ,STREPTOCOCCUS sanguis ,BIOFILMS - Abstract
The objectives of this study were to investigate the effects of dental adhesives containing quaternary ammonium methacrylates (QAMs) with different alkyl chain lengths (CL) on ecological caries prevention in vitro. Five QAMs were synthesized with a CL = 3, 6, 9, 12, and 16 and incorporated into adhesives. Micro-tensile bond strength and surface charge density were used to measure the physical properties of the adhesives. The proportion change in three-species biofilms consisting of Streptococcus mutans, Streptococcus sanguinis, and Streptococcus gordonii was tested using the TaqMan real-time polymerase chain reaction. Lactic acid assay, MTT [3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay, exopolysaccharide staining, live/dead staining, scanning electron microscopy (SEM), and transverse microradiography (TMR) were performed to study the anti-biofilm and anti-demineralization effects of the dental adhesives. The results showed that incorporating QAMs with different alkyl chain lengths into the adhesives had no obvious effect on the dentin bond strength. The adhesives containing QAMs with a longer alkyl chain developed healthier biofilms. The surface charge density, anti-biofilm, and anti-demineralization effects of the adhesives increased with a CL of the QAMs from 3 to 12, but decreased slightly with a CL from 12 to 16. In conclusion, adhesives containing QAMs with a tailored chain length are promising for preventing secondary caries in an “ecological way”. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
11. Novel Dental Adhesive with Biofilm-Regulating and Remineralization Capabilities.
- Author
-
Yang Ge, Biao Ren, Xuedong Zhou, Xu, Hockin H. K., Suping Wang, Mingyun Li, Weir, Michael D., Mingye Feng, and Lei Cheng
- Subjects
POLYAMIDOAMINE dendrimers ,DENTAL adhesives ,DIMETHYLAMINE ,BOND strengths ,SURFACE charges - Abstract
The mechanical properties and anti-caries effect of a novel anti-caries adhesive containing poly (amidoamine) dendrimer (PAMAM) and dimethylaminododecyl methacrylate (DMADDM) were investigated for the first time. Microtensile bond strength and surface charge density were measured for the novel anti-caries adhesives. Streptococcus mutans, Streptococcus sanguinis, and Streptococcus gordonii were chosen to form three-species biofilms. Lactic acid assay, MTT (3-(4,5-Dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, exopolysaccharide staining and live/dead staining were performed to study anti-biofilm effect of the adhesive. The TaqMan realtime polymerase chain reaction was used to study the proportion change in three-species biofilms of different groups. The Scanning Electron Microscope (SEM) was used to observe the remineralization effect of PAMAM and DMADDM. The results showed that incorporating PAMAM and DMADDM into adhesive had no adverse effect on the dentin bond strength. The 1% PAMAM and 5% DMADDM adhesive group showed anti-biofilm properties and developed a healthier biofilm with a lower chance of inducing dental caries. Combination of 1% PAMAM and 5% DMADDM solution maintained remineralization capability on dentin, similar to that using 1% PAMAM alone. In conclusion, the adhesive containing PAMAM and DMADDM had strong antimicrobial properties and biological remineralization capabilities, and is promising for anti-caries clinical applications. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
12. Development of novel dental adhesive with double benefits of protein-repellent and antibacterial capabilities.
- Author
-
Zhang, Ning, Weir, Michael D., Romberg, Elaine, Bai, Yuxing, and Xu, Hockin H.K.
- Subjects
- *
DENTAL caries , *DENTAL plaque , *DENTAL adhesives , *ANTIBACTERIAL agents , *PHOSPHOCHOLINE , *QUATERNARY ammonium compounds - Abstract
Objectives Secondary caries at the tooth-restoration margins remains a main reason for restoration failure. The objectives of this study were to: (1) combine protein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) with quaternary ammonium dimethylaminohexadecyl methacrylate (DMAHDM) to develop a new dental adhesive with double benefits of protein-repellent and antibacterial capabilities for the first time; and (2) investigate the effects on protein adsorption, anti-biofilm activity, and dentin bond strength. Methods MPC and DMAHDM were incorporated into Scotchbond Multi-Purpose (SBMP) primer and adhesive. Dentin shear bond strengths were measured using extracted human molars. Protein adsorption onto the adhesive resin surfaces was determined by the micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm metabolic activity, colony-forming unit (CFU) counts, lactic acid production and live/dead staining of biofilms on resins. Results Incorporation of 7.5% MPC and 5% DMAHDM into primer and adhesive did not adversely affect the dentin shear bond strength ( p > 0.1). The resin with 7.5% MPC + 5% DMAHDM had protein adsorption that was nearly 20-fold less than SBMP control ( p < 0.05). The resin with 7.5% MPC + 5% DMAHDM had much stronger antibacterial effects than using MPC or DMAHDM alone ( p < 0.05). Biofilm CFU counts on the resin with 7.5% MPC + 5% DMAHDM were reduced by more than 4 orders of magnitude, compared to SBMP control. Significance The use of double agents (protein-repellent MPC + antibacterial DMAHDM) in dental adhesive achieved much stronger inhibition of biofilms than using each agent alone. The novel protein-repellent and antibacterial bonding agent is promising to reduce biofilm/plaque buildup and reduce recurrent caries at the tooth-restoration margins. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
13. Antibacterial activity and ion release of bonding agent containing amorphous calcium phosphate nanoparticles.
- Author
-
Chen, Chen, Weir, Michael D., Cheng, Lei, Lin, Nancy J., Lin-Gibson, Sheng, Chow, Laurence C., Zhou, Xuedong, and Xu, Hockin H.K.
- Subjects
- *
DENTAL bonding , *ANTIBACTERIAL agents , *DENTAL adhesives , *CALCIUM phosphate , *DENTAL caries , *ORAL microbiology - Abstract
Objective Recurrent caries at the margins is a primary reason for restoration failure. The objectives of this study were to develop bonding agent with the double benefits of antibacterial and remineralizing capabilities, to investigate the effects of NACP filler level and solution pH on Ca and P ion release from adhesive, and to examine the antibacterial and dentin bond properties. Methods Nanoparticles of amorphous calcium phosphate (NACP) and a quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM) were synthesized. Scotchbond Multi-Purpose (SBMP) primer and adhesive served as control. DMADDM was incorporated into primer and adhesive at 5% by mass. NACP was incorporated into adhesive at filler mass fractions of 10%, 20%, 30% and 40%. A dental plaque microcosm biofilm model was used to test the antibacterial bonding agents. Calcium (Ca) and phosphate (P) ion releases from the cured adhesive samples were measured vs. filler level and solution pH of 7, 5.5 and 4. Results Adding 5% DMADDM and 10-40% NACP into bonding agent, and water-aging for 28 days, did not affect dentin bond strength, compared to SBMP control at 1 day (p>0.1). Adding DMADDM into bonding agent substantially decreased the biofilm metabolic activity and lactic acid production. Total microorganisms, total streptococci, and mutans streptococci were greatly reduced for bonding agents containing DMADDM. Increasing NACP filler level from 10% to 40% in adhesive increased the Ca and P ion release by an order of magnitude. Decreasing solution pH from 7 to 4 increased the ion release from adhesive by 6-10 folds. Significance Bonding agents containing antibacterial DMADDM and remineralizer NACP were formulated to have Ca and P ion release, which increased with NACP filler level from 10% to 40% in adhesive. NACP adhesive was "smart" and dramatically increased the ion release at cariogenic pH 4, when these ions would be most-needed to inhibit caries. Therefore, bonding agent containing DMADDM and NACP may be promising to inhibit biofilms and remineralize tooth lesions thereby increasing the restoration longevity. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
14. Antibacterial Effect of Dental Adhesive Containing Dimethylaminododecyl Methacrylate on the Development of Streptococcus mutans Biofilm.
- Author
-
Suping Wang, Keke Zhang, Xuedong Zhou, Ning Xu, Xu, Hockin H. K., Weir, Michael D., Yang Ge, Shida Wang, Mingyun Li, Yuqing Li, Xin Xu, and Lei Cheng
- Subjects
DENTAL adhesives ,METHACRYLATES ,STREPTOCOCCUS mutans ,BIOFILMS ,MICROBIAL exopolysaccharides ,LACTIC acid - Abstract
Antibacterial bonding agents and composites containing dimethylaminododecyl methacrylate (DMADDM) have been recently developed. The objectives of this study were to investigate the antibacterial effect of novel adhesives containing different mass fractions of DMADDM on Streptococcus mutans (S. mutans) biofilm at different developmental stages. Different mass fractions of DMADDM were incorporated into adhesives and S. mutans biofilm at different developmetal stages were analyzed by MTT assays, lactic acid measurement, confocal laser scanning microscopy and scanning electron microscopy observations. Exopolysaccharides (EPS) staining was used to analyze the inhibitory effect of DMADDM on the biofilm extracellular matrix. Dentin microtensile strengths were also measured. Cured adhesives containing DMADDM could greatly reduce metabolic activity and lactic acid production during the development of S. mutans biofilms (p < 0.05). In earlier stages of biofilm development, there were no significant differences of inhibitory effects between the 2.5% DMADDM and 5% DMADDM group. However, after 72 h, the anti-biofilm effects of adhesives containing 5% DMADDM were significantly stronger than any other group. Incorporation of DMADDM into adhesive did not adversely affect dentin bond strength. In conclusion, adhesives containing DMADDM inhibited the growth, lactic acid production and EPS metabolism of S. mutans biofilm at different stages, with no adverse effect on its dentin adhesive bond strength. The bonding agents have the potential to control dental biofilms and combat tooth decay, and DMADDM is promising for use in a wide range of dental adhesive systems and restoratives. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
15. Effect of salivary pellicle on antibacterial activity of novel antibacterial dental adhesives using a dental plaque microcosm biofilm model.
- Author
-
Li, Fang, Weir, Michael D., Fouad, Ashraf F., and Xu, Hockin H.K.
- Subjects
- *
DENTAL pellicle , *SALIVARY glands , *ANTIBACTERIAL agents , *DENTAL adhesives , *DENTAL plaque , *MICROCOSM & macrocosm , *BIOFILMS - Abstract
Abstract: Objectives: Antibacterial primer and adhesive are promising to inhibit biofilms and caries. Since restorations in vivo are exposed to saliva, one concern is the attenuation of antibacterial activity due to salivary pellicles. The objective of this study was to investigate the effects of salivary pellicles on bonding agents containing a new monomer dimethylaminododecyl methacrylate (DMADDM) or nanoparticles of silver (NAg) against biofilms for the first time. Methods: DMADDM and NAg were synthesized and incorporated into Scotchbond Multi-Purpose adhesive and primer. Specimens were either coated or not coated with salivary pellicles. A microcosm biofilm model was used with mixed saliva from ten donors. Two types of culture medium were used: an artificial saliva medium (McBain), and Brain Heart Infusion (BHI) medium without salivary proteins. Metabolic activity, colony-forming units (CFU), and lactic acid production of plaque microcosm biofilms were measured (n =6). Results: Bonding agents containing DMADDM and NAg greatly inhibited biofilm activities, even with salivary pellicles. When using BHI, the pre-coating of salivary pellicles on resin surfaces significantly decreased the antibacterial effect (p <0.05). When using artificial saliva medium, pre-coating of salivary pellicles on resin did not decrease the antibacterial effect. These results suggest that artificial saliva yielded medium-derived pellicles on resin surfaces, which provided attenuating effects on biofilms similar to salivary pellicles. Compared with the commercial control, the DMADDM-containing bonding agent reduced biofilm CFU by about two orders of magnitude. Significance: Novel DMADDM- and NAg-containing bonding agents substantially reduced biofilm growth even with salivary pellicle coating on surfaces, indicating a promising usage in saliva-rich environment. DMADDM and NAg may be useful in a wide range of primers, adhesives and other restoratives to achieve antibacterial and anti-caries capabilities. [Copyright &y& Elsevier]
- Published
- 2014
- Full Text
- View/download PDF
16. Comparison of quaternary ammonium-containing with nano-silver-containing adhesive in antibacterial properties and cytotoxicity
- Author
-
Li, Fang, Weir, Michael D., Chen, Jihua, and Xu, Hockin H.K.
- Subjects
- *
ANTIBACTERIAL agents , *DENTAL adhesives , *QUATERNARY ammonium compounds , *SILVER nanoparticles , *CELL-mediated cytotoxicity , *DENTAL caries , *COMPARATIVE studies - Abstract
Abstract: Objective: Antibacterial primer and adhesive are promising to help combat biofilms and recurrent caries. The objectives of this study were to compare novel bonding agent containing quaternary ammonium dimethacrylate (QADM) with bonding agent containing nanoparticles of silver (NAg) in antibacterial activity, contact-inhibition vs. long-distance inhibition, glucosyltransferases (gtf) gene expressions, and cytotoxicity for the first time. Methods: QADM and NAg were incorporated into Scotchbond Multi-Purpose adhesive and primer. Microtensile dentin bond strength was measured. Streptococcus mutans (S. mutans) biofilm on resin surface (contact-inhibition) as well as S. mutans in culture medium away from the resin surface (long-distance inhibition) were tested for metabolic activity, colony-forming units (CFUs), lactic acid production, and gtf gene expressions. Eluents from cured primer/adhesive samples were used to examine cytotoxicity against human gingival fibroblasts. Results: Bonding agent with QADM greatly reduced CFU and lactic acid of biofilms on the resin surface (p <0.05), while having no effect on S. mutans in culture medium away from the resin surface. In contrast, bonding agent with NAg inhibited not only S. mutans on the resin surface, but also S. mutans in culture medium away from the resin surface. Bonding agent with QADM suppressed gtfB, gtfC and gtfD gene expressions of S. mutans on its surface, but not away from its surface. Bonding agent with NAg suppressed S. mutans gene expressions both on its surface and away from its surface. Bonding agents with QADM and NAg did not adversely affect microtensile bond strength or fibroblast cytotoxicity, compared to control (p >0.1). Significance: QADM-containing adhesive had contact-inhibition and inhibited bacteria on its surface, but not away from its surface. NAg-containing adhesive had long-distance killing capability and inhibited bacteria on its surface and away from its surface. The novel antibacterial adhesives are promising for caries-inhibition restorations, and QADM and NAg could be complimentary agents in inhibiting bacteria on resin surface as well as away from resin surface. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
17. Dental primer and adhesive containing a new antibacterial quaternary ammonium monomer dimethylaminododecyl methacrylate.
- Author
-
Lei Cheng, Weir, Michael D., Ke Zhang, Arola, Dwayne D., Xuedong Zhou, and Xu, Hockin H. K.
- Subjects
- *
DENTAL fillings , *DENTIN , *DENTAL adhesives , *AMMONIUM , *MONOMERS - Abstract
Objectives: The main reason for restoration failure is secondary caries caused by biofilm acids. Replacing the failed restorations accounts for 50-70% of all operative work. The objectives of this study were to incorporate a new quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM) and nanoparticles of silver (NAg) into a primer and an adhesive, and to investigate their effects on antibacterial and dentin bonding properties. Methods: Scotchbond Multi-Purpose (SBMP) served as control. DMADDM was synthesized and incorporated with NAg into primer/adhesive. A dental plaque microcosm biofilm model with human saliva was used to investigate metabolic activity, colony-forming units (CFU), and lactic acid. Dentin shear bond strengths were measured. Results: Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the new DMADDM were orders of magnitude lower than those of a previous quaternary ammonium dimethacrylate (QADM). Uncured primer with DMADDM had much larger inhibition zones than QADM (p < 0.05). Cured primer/adhesive with DMADDM-NAg greatly reduced biofilm metabolic activity (p < 0.05). Combining DMADDM with NAg in primer/adhesive resulted in less CFU than DMADDM alone (p < 0.05). Lactic acid production by biofilms was reduced by 20- fold via DMADDM-NAg, compared to control. Incorporation of DMADDM and NAg into primer/adhesive did not adversely affect dentin bond strength. Conclusions: A new antibacterial monomer DMADDM was synthesized and incorporated into primer/adhesive for the first time. The bonding agents are promising to combat residual bacteria in tooth cavity and invading bacteria at tooth-restoration margins to inhibit caries. DMADDM and NAg are promising for use into a wide range of dental adhesive systems and restoratives. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
18. Tuning Nano-Amorphous Calcium Phosphate Content in Novel Rechargeable Antibacterial Dental Sealant.
- Author
-
Ibrahim, Maria Salem, AlQarni, Faisal D., Al-Dulaijan, Yousif A., Weir, Michael D., Oates, Thomas W., Xu, Hockin H. K., and Melo, Mary Anne S.
- Subjects
CALCIUM phosphate ,PIT & fissure sealants (Dentistry) ,DENTAL adhesives ,DENTAL materials ,FLEXURAL strength - Abstract
Dental sealants with antibacterial and remineralizing properties are promising for caries prevention among children and adolescents. The application of nanotechnology and polymer development have enabled nanoparticles of amorphous calcium phosphate (NACP) and dimethylaminohexadecyl methacrylate (DMAHDM) to emerge as anti-caries strategies via resin-based dental materials. Our objectives in this study were to (1) incorporate different mass fractions of NACP into a parental rechargeable and antibacterial sealant; (2) investigate the effects on mechanical performance, and (3) assess how the variations in NACP concentration would affect the calcium (Ca) and phosphate (PO
4 ) ion release and re-chargeability over time. NACP were synthesized using a spray-drying technique and incorporated at mass fractions of 0, 10, 20 and 30%. Flexural strength, flexural modulus, and flowability were assessed for mechanical and physical performance. Ca and PO4 ion release were measured over 70 days, and three ion recharging cycles were performed for re-chargeability. The impact of the loading percentage of NACP upon the sealant's performance was evaluated, and the optimized formulation was eventually selected. The experimental sealant at 20% NACP had flexural strength and flexural modulus of 79.5 ± 8.4 MPa and 4.2 ± 0.4 GPa, respectively, while the flexural strength and flexural modulus of a commercial sealant control were 70.7 ± 5.5 MPa (p > 0.05) and 3.3 ± 0.5 GPa (p < 0.05), respectively. A significant reduction in flow was observed in the experimental sealant at 30% NACP (p < 0.05). Increasing the NACP mass fraction increased the ion release. The sealant formulation with NACP at 20% displayed desirable mechanical performance and ideal flow and handling properties, and also showed high levels of long-term Ca and PO4 ion release and excellent recharge capabilities. The findings provide fundamental data for the development of a new generation of antibacterial and rechargeable Ca and PO4 dental sealants to promote remineralization and inhibit caries. [ABSTRACT FROM AUTHOR]- Published
- 2018
- Full Text
- View/download PDF
19. Dual-functional adhesive containing amorphous calcium phosphate nanoparticles and dimethylaminohexadecyl methacrylate promoted enamel remineralization in a biofilm-challenged environment.
- Author
-
Fan, Menglin, Li, Meng, Yang, Yingming, Weir, Michael D., Liu, Yifang, Zhou, Xuedong, Liang, Kunneng, Li, Jiyao, and Xu, Hockin H.K.
- Subjects
- *
CARIOGENIC agents , *DENTAL adhesives , *CALCIUM phosphate , *DENTAL enamel , *ENAMEL & enameling , *METHACRYLATES , *MICROHARDNESS testing - Abstract
The cariogenic biofilm on enamel, restoration, and bonding interface is closely related to dental caries and composite restoration failure. Enamel remineralization at adhesive interface is conducive to protecting bonding interface and inhibiting secondary caries. This study intended to assess the remineralization efficiency of adhesive with dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP) on initial caries lesion of biofilm-coated enamel. Artificial initial carious lesion was created via 72-hour immersion in demineralization solution and cariogenic biofilm was formed after 24-hour culture of Streptococcus mutans (S. mutans). Specimens were then divided into 4 groups: enamel control, enamel treated with NACP, DMAHDM and NACP+DMAHDM respectively. Samples next underwent 7-day cycling, 4 h in BHIS (brain heart infusion broth containing 1 % sucrose) and 20 h in AS (artificial saliva) per day. The pH of BHIS was tested daily. So did the concentration of calcium and phosphate in BHIS and AS. Live/dead staining, colony-forming unit (CFU) count, and lactic acid production of biofilms were measured 7 days later. The enamel remineralization efficiency was evaluated by microhardness testing and transverse microradiography (TMR) quantitatively. Enamel of NACP+DMAHDM group demonstrated excellent remineralization effectiveness. And the NACP+DMAHDM adhesive released a great number of Ca2+ and PO 4 3- ions, increased pH to 5.81 via acid neutralization, decreased production of lactic acid, and reduced CFU count of S. mutans (P < 0.05). The NACP+DMAHDM adhesive would be applicable to preventing secondary caries, strengthening enamel-adhesive interface, and extending the lifespan of composite restoration. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
20. Novel bioactive adhesive containing dimethylaminohexadecyl methacrylate and calcium phosphate nanoparticles to inhibit metalloproteinases and nanoleakage with three months of aging in artificial saliva.
- Author
-
Wu, Linyue, Cao, Xiao, Meng, Yuchen, Huang, Tianjia, Zhu, Changze, Pei, Dandan, Weir, Michael D., Oates, Thomas W., Lu, Yi, Xu, Hockin H.K., and Li, Yuncong
- Subjects
- *
DENTAL adhesives , *ARTIFICIAL saliva , *CALCIUM phosphate , *METALLOPROTEINASES , *STAINS & staining (Microscopy) , *METHACRYLATES - Abstract
The objectives of this study were to: (1) develop a multifunctional adhesive via dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP); and (2) investigate its ability to provide metalloproteinases (MMPs) deactivation and remineralization for long-term dentin bonding durability. DMAHDM and NACP were incorporated into Adper™ Single Bond 2 Adhesive (SB2) at mass fractions of 5% and 20%, respectively. Degree of conversion and contact angle were measured. Endogenous MMP activity of the demineralized dentin beams, Masson's trichrome staining, nano-indentation, microtensile bond strength and interfacial nanoleakage analyses were investigated after 24 h and 3 months of storage aging in artificial saliva. Adding DMAHDM and NACP did not compromise the degree of conversion and contact angle of SB2 (p > 0.05). DMAHDM and NACP incorporation reduced the endogenous MMP activity by 53 %, facilitated remineralization, and increased the Young's modulus of hybrid layer by 49 % after 3 months of aging in artificial saliva, compared to control. For SB2 Control, the dentin bond strength decreased by 38 %, with greater nanoleakage expression, after 3 months of aging (p < 0.05). However, DMAHDM+NACP group showed no loss in bond strength, with much less nanoleakage, after 3 months of aging (p > 0.05). DMAHDM+NACP adhesive greatly reduced MMP-degradation activity in demineralized dentin, induced remineralization at adhesive-dentin interface, and maintained the dentin bond strength after aging, without adversely affecting polymerization and dentin wettability. This new adhesive has great potential to help eliminate secondary caries, prevent hybrid layer degradation, and increase the resin-dentin bond longevity. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
21. Effects of antibacterial primers with quaternary ammonium and nano-silver on Streptococcus mutans impregnated in human dentin blocks
- Author
-
Cheng, Lei, Zhang, Ke, Weir, Michael D., Liu, Huaibing, Zhou, Xuedong, and Xu, Hockin H.K.
- Subjects
- *
DENTIN abnormalities , *ANTIBACTERIAL agents , *PROTECTIVE coatings , *QUATERNARY ammonium compounds , *SILVER nanoparticles , *STREPTOCOCCUS mutans , *COMPOSITE materials , *DENTAL adhesives - Abstract
Abstract: Objective: Recent studies developed antibacterial bonding agents and composites containing a quaternary ammonium dimethacrylate (QADM) and nanoparticles of silver (NAg). The objectives of this study were to investigate: (1) the effect of antibacterial primers containing QADM and NAg on the inhibition of Streptococcus mutans impregnated into dentin blocks for the first time, and (2) the effect of QADM or NAg alone or in combination, and the effect of NAg mass fraction, on S. mutans viability in dentin. Methods: Scotchbond Multi-Purpose (SBMP) bonding agent was used. QADM and NAg were incorporated into SBMP primer. Six primers were tested: SBMP primer control, control+10% QADM (mass%), control+0.05% NAg, control+10% QADM+0.05% NAg, control+0.1% NAg, and control+10% QADM+0.1% NAg. S. mutans were impregnated into dentin blocks, then a primer was applied. The viable colony-forming units (CFU) were then measured by harvesting the bacteria in dentin using a sonication method. Results: Control+10% QADM+0.1% NAg had bacteria inhibition zone 8-fold that of control (p <0.05). The sonication method successfully harvested bacteria from dentin blocks. Control+10% QADM+0.1% NAg inhibited S. mutans in dentin blocks, reducing the viable CFU in dentin by three orders of magnitude, compared to control dentin without primer. Using QADM+NAg was more effective than QADM alone. Higher NAg content increased the potency. Dentin shear bond strength was similar for all groups (p >0.1). Significance: Antibacterial primer with QADM and NAg were shown to inhibit the S. mutans impregnated into dentin blocks for the first time. Bonding agent containing QADM and NAg is promising to eradicate bacteria in tooth cavity and inhibit caries. The QADM and NAg may have applicability to other adhesives, cements, sealants and composites. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
22. Antibacterial response of oral microcosm biofilm to nano-zinc oxide in adhesive resin.
- Author
-
Garcia, Isadora Martini, Balhaddad, AbdulRahman A., Ibrahim, Maria S., Weir, Michael D., Xu, Hockin H.K., Collares, Fabrício Mezzomo, and Melo, Mary Anne S.
- Subjects
- *
RESIN adhesives , *DENTAL adhesives , *BIOFILMS , *DENTAL materials , *ZINC oxide - Abstract
•High-challenge biofilm model was used against ZnO-loaded adhesives. •ZnO-loaded adhesives were tested against mature saliva-derived microcosm biofilm. •Group with 7.5 wt.% of ZnO decreased mature biofilm formation on adhesives. •ZnO affects the degree of conversion and mechanical properties of the adhesives. •Suitable physico-chemical properties were achieved with any concentration of ZnO. Various nanoparticles are currently under investigation to impart biointeractivity for dental materials. This study aimed to: (1) formulate an experimental dental adhesive containing ZnO nanoparticles; (2) evaluate its chemical and mechanical properties; and (3) assess the antibacterial response against oral microcosm biofilm. Nanosized ZnO was chemically and morphologically evaluated. ZnO was incorporated at 0 (G CTRL), 2.5 (G 2.5%), 5 (G 5%) and 7.5 (G 5%) wt.% in an experimental dental adhesive. The adhesives were evaluated for the degree of conversion (DC), flexural strength (FS), and elastic modulus (E). The antibacterial activity was evaluated using a 48 h-microcosm biofilm model after the formation of acquired pellicle on samples' surfaces. Colony-forming units (CFU), metabolic activity, and live/dead staining were assessed. Nanosized ZnO presented characteristic peaks of Zn-O bonds, and the particles were arranged in agglomerates. The DC ranged from 62.21 (±1.05) % for G Ctrl to 46.15 (±1.23) % for G 7.5% (p < 0.05). G 7.5% showed lower FS compared to all groups (p < 0.05). Despite achieving higher E (p < 0.05), G 2.5% did not show differences for G Ctrl regarding the FS (p > 0.05). G 7.5% had lower CFU/mL compared to G Ctrl for mutans streptococci (p < 0.05) and total microorganisms (p < 0.05), besides presenting lower metabolic activity (p < 0.05) and higher dead bacteria via biofilm staining. The dental adhesives' physicochemical properties were similar to commercial adhesives and in compliance with ISO recommendations. G 7.5% restricted the growth of oral microcosm biofilm without impairing the physicochemical performance. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
23. Nano-calcium phosphate and dimethylaminohexadecyl methacrylate adhesive for dentin remineralization in a biofilm-challenged environment.
- Author
-
Tao, Siying, Su, Zhifei, Xiang, Zhenting, Xu, Hockin H.K., Weir, Michael D., Fan, Menglin, Yu, Zhaohan, Zhou, Xuedong, Liang, Kunneng, and Li, Jiyao
- Subjects
- *
DENTAL adhesives , *METHACRYLATES , *STREPTOCOCCUS sanguis , *ADHESIVES , *ARTIFICIAL saliva , *DENTIN , *DENTAL calculus , *TOOTH demineralization - Abstract
Dentin remineralization at the bonded interface would protect it from external risk factors, therefore, would enhance the longevity of restoration and combat secondary caries. Dental biofilm, as one of the critical biological factors in caries formation, should not be neglected in the assessment of caries preventive agents. In this work, the remineralization effectiveness of demineralized human dentin in a multi-species dental biofilm environment via an adhesive containing nanoparticles of amorphous calcium phosphate (NACP) and dimethylaminohexadecyl methacrylate (DMAHDM) was investigated. Dentin demineralization was promoted by subjecting samples to a three-species acidic biofilm containing Streptococcus mutans , Streptococcus sanguinis, Streptococcus gordonii for 24 h. Samples were divided into a control group, a DMAHDM adhesive group, an NACP group, and an NACP + DMAHDM adhesive group. A bonded model containing a control-bonded group, a DMAHDM-bonded group, an NACP-bonded group, and an NACP + DMAHDM-bonded group was also included in this study. All samples were subjected to a remineralization protocol consisting of 4-h exposure per 24-h period in brain heart infusion broth plus 1% sucrose (BHIS) followed by immersion in artificial saliva for the remaining period. The pH of BHIS after 4-h immersion was measured every other day. After 14 days, the biofilm was assessed for colony-forming unit (CFU) count, lactic acid production, live/dead staining, and calcium and phosphate content. The mineral changes in the demineralized dentin samples were analyzed by transverse microradiography. The in vitro experiment results showed that the NACP + DMAHDM adhesive effectively achieved acid neutralization, decreased biofilm colony-forming unit (CFU) count, decreased biofilm lactic acid production, and increased biofilm calcium and phosphate content. The NACP + DMAHDM adhesive group had higher remineralization value than the NACP or DMAHDM alone adhesive group. The NACP + DMAHDM adhesive was effective in remineralizing dentin lesion in a biofilm model. It is promising to use NACP + DMAHDM adhesive to protect bonded interface, inhibit secondary caries, and prolong the longevity of restoration. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
24. Self-healing adhesive with antibacterial activity in water-aging for 12 months.
- Author
-
Wu, Junling, Zhou, Chuanjian, Ruan, Jianping, Weir, Michael D., Tay, Franklin, Sun, Jirun, Melo, Mary Anne S., Oates, Thomas W., Chang, Xiaofeng, and Xu, Hockin H.K.
- Subjects
- *
ADHESIVES , *DENTAL plaque , *DENTAL adhesives , *FRACTURE toughness , *BOND strengths - Abstract
Secondary caries and micro-cracks are the main limiting factors for dentin bond durability. The objectives of this study were to develop a self-healing adhesive containing dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP), and investigate the effects of water-aging for 12 months on self-healing, dentin bonding, and antibacterial properties for the first time. Microcapsules were synthesized with poly (urea-formaldehyde) (PUF) shells containing triethylene glycol dimethacrylate (TEGDMA) and N,N -dihydroxyethyl- p -toluidine (DHEPT). The adhesive contained 7.5% microcapsules, 10% DMAHDM, and 20% NACP (all mass). Specimens were water-aged at 37 °C for 1 day to 12 months. Dentin bond strength was measured using extracted human teeth. A single-edge-V-notched-beam (SEVNB) method was used to measure fracture toughness K IC and self-healing efficiency. A dental plaque microcosm biofilm model was used with human saliva as inoculum. The microcapsules + DMAHDM + NACP group showed no decline in dentin bond strength after water-aging for 12 months, which was significantly higher than that of other groups without DMAHDM (p < 0.05). A self-healing efficiency of 67% recovery in K IC was obtained even after 12 months of water immersion, indicating that the self-healing ability was not lost in water-aging (p > 0.1). The bacteria-killing ability of this adhesive did not decline from 1 day to 12 months (p > 0.1), with biofilm CFU reduction by 3–4 orders of magnitude after the resin was water-aged for 12 months, compared to control resin. This novel adhesive with triple merits of self-healing, antibacterial and remineralization functions showed an excellent long-term durability in water-aging for 12 months. This multifunctional adhesive has the potential for dental applications to heal cracks, inhibit bacteria, provide ions for remineralization, and increase the restoration longevity. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
25. Development of a new class of self-healing and therapeutic dental resins.
- Author
-
Wu, Junling, Xie, Xianju, Zhou, Han, Tay, Franklin R., Weir, Michael D., Melo, Mary Anne S., Oates, Thomas W., Zhang, Ning, Zhang, Qiang, and Xu, Hockin H.K.
- Subjects
- *
DENTAL resins , *DENTAL adhesives , *SELF-healing materials , *REMINERALIZATION (Teeth) , *DENTAL materials , *BIOMEDICAL materials , *CEMENT composites - Abstract
Bulk fracture and secondary caries are the two main problems causing failures and shortening the lifetime of dental resinous restorations. This article reviews recent research on self-healing dental and biomedical materials. This includes the development of self-healing dental resin composites and adhesives, combining self-healing with calcium phosphate nanoparticles in the resins for tooth lesion remineralization, and adding antibacterial monomer into self-healing resins to suppress oral biofilm grows and acid production. Furthermore, since the oral environment experiences saliva and drinks, this paper also reviews research on the self-healing of dental resins while being submerged in an aqueous environment, and the effect of long-term water-aging time from 1 day to 6 months on the self-healing capability. The new class of materials have demonstrated excellent self-healing efficacy in various material systems including bonding agents, composites and cements. They could heal cracks, regain load-bearing ability, inhibit oral pathogens, reduce or eliminate biofilm acids, raise biofilm pH to protect the teeth, and regenerate lost tooth minerals. Furthermore, their effects were indicated to be durable and long-lasting. While most of the recent publications on self-healing dental resins are from our group, this article also reviews publications from other researchers. The novel class of dental materials with triple benefits of self-healing, antibacterial and remineralization capabilities offer the much-needed improvements to address the two main reasons for restoration failures: fracture and secondary caries. They are expected to have potential for a wide range of dental and biomedical applications to overcome the current challenges and prolong the restoration life. • This article includes the development of self-healing dental resin composites and adhesives, combining self-healing with calcium phosphate nanoparticles in the resins for tooth lesion remineralization, and adding antibacterial monomer into self-healing resins to suppress oral biofilm grows and acid production. • Furthermore, since the oral environment is wet and fluid, this paper also reviews research on the self-healing of dental resins while being submerged in an aqueous environment, and the effect of long-term water-aging on the self-healing capability. • While most of the recent publications on self-healing dental resins are from our group, this article also reviews publications from other researchers. • The new class of self-healing dental materials have established excellent self-healing efficacy in various material systems including resins, bonding agents, composites and cements. • This novel class of dental materials with triple benefits of self-healing, antibacterial and remineralization capabilities offer the much-needed improvements to address the two main reasons for restoration failures: fracture and secondary caries, furthermore, their effects were indicated to be durable and long-lasting. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
26. Novel magnetic nanoparticle-containing adhesive with greater dentin bond strength and antibacterial and remineralizing capabilities.
- Author
-
Li, Yuncong, Hu, Xiaoyi, Xia, Yang, Ji, Yadong, Ruan, Jianping, Weir, Michael D., Lin, Xiaoying, Nie, Zhihong, Gu, Ning, Masri, Radi, Chang, Xiaofeng, and Xu, Hockin H.K.
- Subjects
- *
MAGNETIC nanoparticles , *DENTIN , *DENTAL adhesives , *DRUG delivery systems , *METHACRYLATES - Abstract
Objectives A nanoparticle-doped adhesive that can be controlled with magnetic forces was recently developed to deliver drugs to the pulp and improve adhesive penetration into dentin. However, it did not have bactericidal and remineralization abilities. The objectives of this study were to: (1) develop a magnetic nanoparticle-containing adhesive with dimethylaminohexadecyl methacrylate (DMAHDM), amorphous calcium phosphate nanoparticles (NACP) and magnetic nanoparticles (MNP); and (2) investigate the effects on dentin bond strength, calcium (Ca) and phosphate (P) ion release and anti-biofilm properties. Methods MNP, DMAHDM and NACP were mixed into Scotchbond SBMP at 2%, 5% and 20% by mass, respectively. Two types of magnetic nanoparticles were used: acrylate-functionalized iron nanoparticles (AINPs); and iron oxide nanoparticles (IONPs). Each type was added into the resin at 1% by mass. Dentin bonding was performed with a magnetic force application for 3 min, provided by a commercial cube-shaped magnet. Dentin shear bond strengths were measured. Streptococcus mutans biofilms were grown on resins, and metabolic activity, lactic acid and colony-forming units (CFU) were determined. Ca and P ion concentrations in, and pH of biofilm culture medium were measured. Results Magnetic nanoparticle-containing adhesive using magnetic force increased the dentin shear bond strength by 59% over SBMP Control ( p < 0.05). Adding DMAHDM and NACP did not adversely affect the dentin bond strength ( p > 0.05). The adhesive with MNP + DMAHDM + NACP reduced the S. mutans biofilm CFU by 4 logs. For the adhesive with NACP, the biofilm medium became a Ca and P ion reservoir. The biofilm culture medium of the magnetic nanoparticle-containing adhesive with NACP had a safe pH of 6.9, while the biofilm medium of commercial adhesive had a cariogenic pH of 4.5. Significance Magnetic nanoparticle-containing adhesive with DMAHDM and NACP under a magnetic force yielded much greater dentin bond strength than commercial control. The novel adhesive reduced biofilm CFU by 4 logs and increased the biofilm pH from a cariogenic pH 4.5–6.9, and therefore is promising to enhance the resin–tooth bond, strengthen tooth structures, and suppress secondary caries at the restoration margins. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
27. The anti-caries effects of dental adhesive resin influenced by the position of functional groups in quaternary ammonium monomers.
- Author
-
Liang, Jingou, Li, Mingyun, Ren, Biao, Wu, Tianmu, Xu, Hockin H.K., Liu, Yong, Peng, Xian, Yang, Ge, Weir, Michael D., Zhang, Shiyong, Cheng, Lei, and Zhou, Xuedong
- Subjects
- *
DENTAL adhesives , *DENTAL resins , *AMMONIUM compounds , *BIOCOMPATIBILITY , *BIOFILMS , *POLYMERASE chain reaction - Abstract
Objectives A new quaternary ammonium monomer (QAM), triethylaminododecyl acrylate (TEADDA) was synthesized, in which the position of the functional groups was different from that of dimethylaminododecyl methacrylate (DMADDM). The objectives were to: (1) investigate the effect of the changed position of the functional groups on the mechanical properties, anti-biofilm activity and biocompatibility of adhesive resin, and (2) study the anti-bacterial mechanism of QAM to improve the performance of the adhesive system modified by QAM. Methods TEADDA and DMADDM were added into adhesives. Microtensile bond strength and surface charge density were measured. Multi-species biofilms were incubated on specimens for 16 h, 48 h and 72 h and analyzed via MTT assay, lactic acid measurement and confocal laser scanning microscopy. The ratio of different species of bacteria was measured by real-time polymerase chain reaction. Cytotoxicity and biocompatibility were analyzed by eluents cytotoxicity test and histological images of H&E staining via an animal study in rats. Results The mass fraction of TEDDA allowed to be added into adhesive was higher than that of DMADDM. However, even 10% TEADDA did not yield a strong anti-biofilm effect on biofilm growth, lactic acid production and bacteria compositions. TEADDA added into adhesives showed better mechanical properties but weaker anti-bacterial effect. There was no significant difference on cytotoxicity and biocompatibility between DMADDM and TEADDA. Significance The study could be helpful for the investigation of the anti-caries mechanism of QAMs, the design of new QAMs and the improvement of the anti-caries activity of the modified dental materials. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
28. Novel dental adhesive with triple benefits of calcium phosphate recharge, protein-repellent and antibacterial functions.
- Author
-
Xie, Xianju, Wang, Lin, Xing, Dan, Zhang, Ke, Weir, Michael D., Liu, Huaibing, Bai, Yuxing, and Xu, Hockin H.K.
- Subjects
- *
DENTAL adhesives , *ANTIBACTERIAL agents , *NANOMEDICINE , *ORAL microbiology , *DENTAL materials , *CALCIUM phosphate , *COLONY-forming units assay - Abstract
Objective A new adhesive containing nanoparticles of amorphous calcium phosphate (NACP) with calcium (Ca) and phosphate (P) ion rechargeability was recently developed; however, it was not antibacterial. The objectives of this study were to: (1) develop a novel adhesive with triple benefits of Ca and P ion recharge, protein-repellent and antibacterial functions via dimethylaminohexadecyl methacrylate (DMAHDM) and 2-methacryloyloxyethyl phosphorylcholine (MPC); and (2) investigate dentin bond strength, protein adsorption, Ca and P ion concentration, microcosm biofilm response and pH properties. Methods MPC, DMAHDM and NACP were mixed into a resin consisting of ethoxylated bisphenol A dimethacrylate (EBPADMA), pyromellitic glycerol dimethacrylate (PMGDM), 2-hydroxyethyl methacrylate (HEMA) and bisphenol A glycidyl dimethacrylate (BisGMA). Protein adsorption was measured using a micro bicinchoninic acid method. A human saliva microcosm biofilm model was tested on resins. Colony-forming units (CFU), live/dead assay, metabolic activity, Ca and P ion concentration and biofilm culture medium pH were determined. Results The adhesive with 5% MPC + 5% DMAHDM + 30% NACP inhibited biofilm growth, reducing biofilm CFU by 4 log, compared to control (p < 0.05). Dentin shear bond strengths were similar (p > 0.1). Biofilm medium became a Ca and P ion reservoir having ion concentration increasing with NACP filler level. The adhesive with 5% MPC + 5% DMAHDM + 30% NACP maintained a safe pH > 6, while commercial adhesive had a cariogenic pH of 4. Significance The new adhesive with triple benefits of Ca and P ion recharge, protein-repellent and antibacterial functions substantially reduced biofilm growth, reducing biofilm CFU by 4 orders of magnitude, and yielding a much higher pH than commercial adhesive. This novel adhesive is promising to protect tooth structures from biofilm acids. The method of using NACP, MPC and DMAHDM is promising for application to other dental materials to combat caries. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
29. Effect of water-ageing on dentine bond strength and anti-biofilm activity of bonding agent containing new monomer dimethylaminododecyl methacrylate.
- Author
-
Ke Zhang, Lei Cheng, Wu, Eric J., Weir, Michael D., Yuxing Bai, and Xu, Hockin H. K.
- Subjects
- *
DENTIN , *WATER , *DENTAL adhesives , *BIOFILMS , *ADHESIVES , *MONOMERS , *METHACRYLATES , *DENTAL caries , *ANTIBACTERIAL agents - Abstract
Objectives: The objectives of this study were to develop bonding agent containing a new antibacterial monomer dimethylaminododecyl methacrylate (DMADDM) as well as nanoparticles of silver (NAg) and nanoparticles of amorphous calcium phosphate (NACP), and to investigate the effects of water-ageing for 6 months on dentine bond strength and antibiofilm properties for the first time. Methods: Four bonding agents were tested: Scotchbond Multi-Purpose (SBMP) Primer and Adhesive control; SBMP + 5% DMADDM; SBMP + 5% DMADDM + 0.1% NAg; and SBMP + 5% DMADDM + 0.1% NAg with 20% NACP in adhesive. Specimens were water-aged for 1 d and 6 months at 37 8C. Then the dentine shear bond strengths were measured. A dental plaque microcosm biofilm model was used to inoculate bacteria on water-aged specimens and to measure metabolic activity, colony-forming units (CFUs), and lactic acid production. Results: Dentine bond strength showed a 35% loss in 6 months of water-ageing for SBMP control (mean sd; n = 10); in contrast, the new antibacterial bonding agents showed no strength loss. The DMADDM-NAg-NACP containing bonding agent imparted a strong antibacterial effect by greatly reducing biofilm viability, metabolic activity and acid production. The biofilm CFU was reduced by more than two orders of magnitude, compared to SBMP control. Furthermore, the DMADDM-NAg-NACP bonding agent exhibited a long-term antibacterial performance, with no significant difference between 1 d and 6 months ( p > 0.1). Conclusions: Incorporating DMADDM-NAg-NACP in bonding agent yielded potent and longlasting antibacterial properties, and much stronger bond strength after 6 months of waterageing than a commercial control. The new antibacterial bonding agent is promising to inhibit biofilms and caries at the margins. The method of DMADDM-NAg-NACP incorporation may have a wide applicability to other adhesives, cements and composites [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
30. Novel dental adhesives containing nanoparticles of silver and amorphous calcium phosphate
- Author
-
Melo, Mary Anne S., Cheng, Lei, Zhang, Ke, Weir, Michael D., Rodrigues, Lidiany K.A., and Xu, Hockin H.K.
- Subjects
- *
DENTAL adhesives , *SILVER nanoparticles , *DENTAL caries , *AMORPHOUS substances , *CALCIUM phosphate , *DENTAL fillings , *THERAPEUTICS - Abstract
Abstract: Objectives: Secondary caries is the main reason for restoration failure, and replacement of the failed restorations accounts for 50–70% of all restorations. Antibacterial adhesives could inhibit residual bacteria in tooth cavity and invading bacteria along the margins. Calcium (Ca) and phosphate (P) ion release could remineralize the lesions. The objectives of this study were to incorporate nanoparticles of silver (NAg) and nanoparticles of amorphous calcium phosphate (NACP) into adhesive for the first time, and to investigate the effects on dentin bond strength and plaque microcosm biofilms. Methods: Scotchbond multi-purpose adhesive was used as control. NAg were added into primer and adhesive at 0.1% by mass. NACP were mixed into adhesive at 10%, 20%, 30% and 40%. Microcosm biofilms were grown on disks with primer covering the adhesive on a composite. Biofilm metabolic activity, colony-forming units (CFU) and lactic acid were measured. Results: Human dentin shear bond strengths (n =10) ranged from 26 to 34MPa; adding NAg and NACP into adhesive did not decrease the bond strength (p >0.1). SEM examination revealed resin tags from well-filled dentinal tubules. Numerous NACP infiltrated into the dentinal tubules. While NACP had little antibacterial effect, NAg in bonding agents greatly reduced the biofilm viability and metabolic activity, compared to the control (p <0.05). CFU for total microorganisms, total streptococci, and mutans streptococci on bonding agents with NAg were an order of magnitude less than those of the control. Lactic acid production by biofilms for groups containing NAg was 1/4 of that of the control. Significance: Dental plaque microcosm biofilm viability and acid production were greatly reduced on bonding agents containing NAg and NACP, without compromising dentin bond strength. The novel method of incorporating dual agents (remineralizing agent NACP and antibacterial agent NAg) may have wide applicability to other dental bonding systems. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.