Search

Micro-nano satellites show considerable potential in the application of low-orbit satellite networks, and low-power Hall effect thrusters (HETs) that provide the impetus for them have also attracted considerable attention worldwide. However, the relatively large surface-to-volume ratio of low-power HETs leads to significant loss of ions on the wall surface. After the channel width is increased or the ionization area is moved outward, ensuring sufficient ionization of the propellant is very difficult, and thus its integrated performance is not high. Thus, in this study, a 100-W permanent magnet HET with an aft-magnetic field is considered as the carrier to investigate the effect of gas supply direction on the thruster discharge characteristics through a simulation and experiments. Results indicate that under the same working conditions, adopting the circumferential direction gas supply mode effectively increases the density of the propellant in the ionization zone (up to 7%), improves the propellant ionization rate (up to 12.7%), and improves integrated discharge performance (the anode efficiency can be increased by up to 5.3%). In addition, the performance optimization effect of this mode is more evident under the working condition of low flow. When combined with an aft-magnetic field, this method is an effective means to ensure high-efficiency discharge of a low-power HET, which can be used as a reference for the miniaturization development of HETs. • The circumferential direction gas supply mode increases the density and ionization rate of propellant. • The performance optimization effect is more evident under the working condition of low flow. • The circumferential direction gas supply mode is an effective means to ensure high-efficiency discharge of low-power HET. [ABSTRACT FROM AUTHOR]

Using a permanent magnet to realize a design with a large height-radius ratio can effectively reduce the radial size of the thruster. The experimental results show that a Hall thruster with a large height-radius ratio also has significant advantages in its discharge performance. Taking the 1.35 kW Hall thruster HEP-1350PM, which has a large height-radius ratio, as an example, the thrust, specific impulse, and efficiency of HEP-1350PM are increased by up to 4.3%, 10.4%, and 7%, respectively, as compared to SPT-100, while its weight is only 56% of that of SPT-100. Numerical simulations were performed to understand the discharge characteristics of a Hall thruster with a large height-radius ratio and the internal mechanism of its performance improvement. The results show that the small middle diameter and wide channel structure concentrate the distribution of the neutral gas in the channel, accelerate the decrease of the propellant density along the axial direction, and move the main ionization zone closer to the channel upstream. These factors increase the ionization concentration, ionization rate peak, working medium utilization rate, and voltage utilization rate. They also reduce the ion loss on the wall surface and plume divergence, thereby improving the comprehensive discharge performance. This study verifies the feasibility of a large height-radius ratio in the design of a Hall thruster, and demonstrates that the design would not only be valuable for reducing the volume and weight of the thruster, but also has the advantages of enhancing its discharge performance and prolonging its working life. • Large height-radius ratio design can reduce the volume and weight of the thruster. • A large height-radius ratio can improve the discharge performance of the thruster. • Hall thruster with a large height-radius ratio has a higher acceleration efficiency. [ABSTRACT FROM AUTHOR]

With the development of electric space propulsion and all-electric propulsion technologies, the application range of the Hall effect thruster (HET) has gradually expanded. As an important part of the HET, the magnetic field plays a decisive role in its performance. In the development of versatile HETs, it is necessary to comprehensively and thoroughly understand the effects of the magnetic field on the HET discharge characteristics. In this paper, a HEP-100X thruster with multiple degrees of freedom in terms of magnetic field control is used to study the effects of the peak magnetic field position on the thruster discharge characteristics. The results indicate that the peak magnetic field position can effectively control the main ionization zone position and affect the ionization rate. The thruster has the best comprehensive discharge performance when the peak magnetic field position is located near the channel exit. Further analysis reveals that the performance improvement is mainly due to the reduced ion loss on the wall surface and plume divergence half-angle, and the increased current utilization efficiency and voltage utilization efficiency. The HEP-100X shows the above trends under various flow conditions, and the anode efficiency is the highest when the anode flow is 50 sccm. In this condition, the propellant is sufficiently ionized and the ion loss on the wall surface is small. This research provides the necessary support for a comprehensive understanding of the role and significance of the magnetic field in the thruster discharge process, and has important significance for the design optimization of multifunctional Hall thrusters and subsequent research. [ABSTRACT FROM AUTHOR]

Poor performance limits the wider application of 100-W-power class Hall thrusters. The effects of position matching between the anode and the zero-magnetic-field region (ZMFR) on the discharge process and performance improvement of 100-W Hall thrusters were investigated. The experimental results demonstrate that appropriately widening the ZMFR downstream of the anode improves the ion current and thrust, promotes plume focusing, and optimizes thruster performance. The thrust and anode efficiency is enlarged by 7.6 % and 20 % (relative value), respectively, when the ZMFR downstream of the anode is expanded by 0.2 L (L is the channel length). The simulation results indicated that widening the ZMFR promoted the expansion of the high-ionization zone to the bottom of the channel, and increased the overall ionization rate. Moreover, as the ZMFR increases, the effective ion acceleration voltage increases. However, widening the ZMFR also aggravated the ion-wall interaction and reduced the propellant utilization rate. Therefore, the performance of the thrusters exhibited an optimal range as the length of the ZMFR increased. In addition, increasing the ZMFR did not affect the life of the thrusters. • The effects of position matching between the anode and zero magnetic field region on discharge characteristics are studied. • The discharge characteristic parameters of thruster with different lengths of ZMFR downstream of the anode are given. • Appropriately increasing the ZMFR can improve the ion current and thrust, thereby improving the anode efficiency. • The position matching between the anode and ZMFR affects the ionization process and propellant utilization ratio. [ABSTRACT FROM AUTHOR]