Search

This paper proposes increasing the width of the discharge channel to improve the specific impulse of Hall thrusters. In our study, we significantly increased the achievable channel width by optimizing the magnetic circuit topology, and the design freedom of the Hall thruster was improved. A prototype of a wide-channel high-specific-impulse Hall thruster was designed and experimentally verified. The effects of channel width on the discharge process and the characteristics of an aft-loaded magnetic field Hall thruster were investigated. The high-intensity luminous region did not diffuse radially with an increase in the channel width, and the plasma was always concentrated near the channel centerline. A wider channel is more conducive for improving the propellant utilization efficiency, thereby effectively improving the specific impulse of the Hall thruster. By optimizing the discharge channel width, the upper limit of the discharge voltage was increased, and the maximum specific impulse was increased from 3170 to 3794 s, a relative improvement of 20%. The effect of the specific impulse improvement at the same discharge voltage was analyzed and discussed. The results of this study are significant for the design of high-specific-impulse Hall thrusters. [ABSTRACT FROM AUTHOR]

The strength and shape of the magnetic field are the core factors in the design of the Hall thruster. However, Hall current can affect the distribution of static magnetic field. In this paper, the Particle-In-Cell (PIC) method is used to obtain the distribution of Hall current in the discharge channel. The Hall current is separated into a direct and an alternating part to calculate the induced magnetic field using Finite Element Method Magnetics (FEMM). The results show that the direct Hall current decreases the magnetic field strength in the acceleration region and also changes the shape of the magnetic field. The maximum reduction in radial magnetic field strength in the exit plane is 10.8 G for an anode flow rate of 15 mg/s and the maximum angle change of the magnetic field line is close to 3° in the acceleration region. The alternating Hall current induces an oscillating magnetic field in the whole discharge channel. The actual magnetic deformation is shown to contain these two parts. [ABSTRACT FROM AUTHOR]

The theoretical specific impulse of Hall thrusters using a krypton propellant is much higher than that of those using xenon. However, the actual benefits of this improvement are limited by the difficulty in achieving krypton atom ionization, and its efficiency is much lower than that of xenon. In this study, the anode specific impulse and anode efficiency of Hall thrusters using krypton propellant were improved by adding a small quantity of xenon. A dual-channel supply of xenon and krypton was achieved by optimizing the discharge channel structure based on the design of the aft-loaded magnetic field. The effects of the xenon and krypton supply method and xenon fraction on the discharge characteristics of the Hall thruster were investigated by conducting discharge experiments using the mixed propellant. The results indicated that injecting a small quantity of xenon significantly improved the ionization of krypton, improved the ionization and acceleration efficiency of the thruster, and fully utilized the high specific impulse characteristics of krypton. Furthermore, the addition of a small quantity of xenon also significantly increased the upper limit of the discharge voltage for stable operation using krypton from 500 V. At the maximum tested xenon fraction, the maximum discharge voltage was loaded to 900 V. At a discharge voltage of 800 V, the optimal anode efficiency and anode specific impulse increased by 4.5 % and 534 s, respectively, compared with those for pure xenon propellant (with an anode efficiency of 54 % and anode specific impulse of 3034 s). The results of this study are of great significance for the design of high-efficiency, high-specific-impulse, and low-cost Hall thrusters. • A dual-channel gas supply structure is proposed, which can supply two kinds of gases into the discharge channel individually. • Thruster performance is optimal when krypton is supplied downstream and auxiliary xenon is supplied upstream. • High-voltage operating ability under krypton is greatly improved with the assistance of a small quantity of xenon. [ABSTRACT FROM AUTHOR]

In order to develop multi-mode thrusters for all-electric propulsion spacecraft, a double-stage Hall thruster is designed and investigated experimentally. By applying two independent non-emissive electrodes and a double-peaked magnetic field in the double-stage Hall thruster, the propellant can be ionized in the first stage and then accelerated in the second stage. Experiment results revealed that double-stage discharge effectively improves thruster performance in high specific impulse working mode by reducing the electron current. A one-dimensional model is used to discuss the effects of discharge parameters on ionization distribution theoretically. As a conclusion, ionization distribution (in terms of position and length) in high specific impulse mode (mode I) is significantly different compared to high-thrust working mode (mode F). This double-stage Hall thruster provides a double-stage discharge in mode I to enhance the ionization in the channel and a single-stage discharge in mode F to reduce the ion wall-loss, achieving high efficiency in both working modes. [ABSTRACT FROM AUTHOR]