Search

In this paper, the averaged small-signal model of the dual-interleaved buck converter is extended to include the phase interaction effects that arise from the interleaved sampling of the phase currents. Sampler decomposition techniques are used to extend the averaged model, revealing a slow-scale instability that can place significant restrictions on the choice of controller parameters. The model is confirmed by simulations and measurements using a 60-kW dual-interleaved prototype with an interphase transformer; however, the analysis is equally applicable to interleaved converters without magnetic coupling. [ABSTRACT FROM AUTHOR]

Two techniques are presented to balance the filter capacitor voltages of a multipulse rectifier with the active injection operating on a variable-frequency supply. The active injector consists of a low-rated bidirectional switch that modifies the behavior of a 12-pulse rectifier at either low or high frequency, resulting in 24-pulse or multilevel pulse width modulation operation, respectively. The operation of the rectifier and the injector, the practical issues that unbalance the capacitor voltages, and the methods to correct this imbalance are explained together with experimental results obtained with a 4-kW prototype. [ABSTRACT FROM AUTHOR]

A three-phase, multilevel rectifier using active voltage injection with one MOSFET device is presented. The injector consists of a bidirectional switch that modifies the behavior of a 12-pulse rectifier resulting in either 24-pulse or multilevel pulsewidth-modulated (PWM) operation. The resultant input currents are almost sinusoidal, the line current THD being 2.36% for 24-pulse operation and 1.06% for PWM operation. The MOSFET current is 2.9% of the load current. The circuit operation, idealized waveforms and modulation strategy are explained and experimental results are presented. [ABSTRACT FROM AUTHOR]

A new converter topology for a three-phase multi- pulse rectifier circuit is described. This converter draws almost sinusoidal currents from the ac system with very low harmonic content and typically less than 3% total harmonic distortion. The topology uses only passive components and has a lower component count than other rectifier circuits with similar performance. Two six-pulse rectifier bridges are connected in series, fed by a series connection of transformers, to form a 12-pulse system. An additional low power harmonic injection circuit enhances the performance of the circuit to obtain low harmonic current pollution levels that are comparable with those achieved from a 24-pulse rectifier. The circuit operation is explained and experimental results are presented. [ABSTRACT FROM AUTHOR]