Search

This paper offers a novel dual-mode double stator wound rotor synchronous machine for variable speed applications. The proposed motor integrates the benefits of both the traditional wound rotor synchronous machine (WRSM) and brushless wound rotor synchronous machine (BL-WRSM). A constant torque can be attained in the maximum torque per ampere region by operating the proposed machine as a traditional WRSM in Mode I, and a constant power can be attained in the field-weakening region by operating it as a BL-WRSM in Mode II. Moreover, due to the dual-stator structure, the proposed machine exhibits improved performance in terms of high torque density as compared to the existing single stator BL-WRSM. By using a special stator winding arrangement to achieve the sub-harmonic component of the stator magnetomotive force, the brushless operation of the proposed machine is achieved. The additional sub-harmonic component induces a voltage in the harmonic winding placed on the rotor, which is then rectified and provided a DC current to field winding for brushless excitation. In order to validate the effectiveness of the proposed machine, a two-dimensional finite element analysis (FEA) is carried out. [ABSTRACT FROM AUTHOR]

This paper proposes a sub-harmonic-based brushless wound rotor synchronous machine (WRSM) topology. The proposed topology involves two threephase stator windings with a different number of turns. Both windings are linked in parallel and are provided with current from a single inverter. One of these windings is a four-pole winding while the second winding is a two-pole winding. This arrangement generates a magneto-motive force (MMF) in the air-gap of the machine comprising of two components: a regular fundamental MMF and a sub-harmonic MMF. The fundamental component produces the main stator field whereas the sub-harmonic component generates a subharmonic field that is utilized to produce a harmonic current in a two-pole rotor harmonic winding. The induced harmonic current is rectified to inject direct current (DC) to the field winding and produce a four-pole rotor magnetic field. The four-pole rotor magnetic field when magnetically interacts with the same number of the main stator field poles producing torque. Finite element analysis (FEA) is carried out to confirm the operation and achieve the electromagnetic behavior of the proposed topology. [ABSTRACT FROM AUTHOR]

This paper suggests a method to improve the performances of the Dual Stator Axial Flux Spoke-type Permanent Magnet (DSAFSPM) machines with phase group concentrated coil (PGCC) windings, by incorporating continuous and discrete step-skewing along with a special winding connection. The purpose of the study is to mitigate the cogging torque and torque ripples while increasing the output torque so it ameliorates the machine performance at minimum cost for various applications such as wind power plants and electric vehicles (EVs). Cogging torque produces noise and vibrations which degrade the machine's performance and reduces its life span. The proposed winding sequence enhances the output torque by improving its distribution factor along with the use of continuous skew and step-skew magnets. This research work improved the cogging torque and torque ripples with the help of skew techniques while output torque is increased by the proposed winding sequence. Further harmonics and ripples are also mitigated by the proposed winding sequence. The overall machine volume is kept constant along with the magnet size and the design parameters for fair performance analysis. Comparative analysis of these machines is performed using three-dimensional (3-D) time-stepped finite element analysis (FEA). Proposed model I and proposed model II reduce the harmonics by 42% and 23%, respectively. By using continuous skew and discrete step-skew magnets, cogging torque is reduced up to 81.5% and 75%, respectively. This reduction in cogging torque reduces the noise and vibration in machines which assists the machines to perform a smooth operation. The reduction in output torque ripples in proposed model I is 60.8% while that of proposed model II is 59.3%. [ABSTRACT FROM AUTHOR]

This paper presents a proposed model of a multi-stack slotted stator axial-flux type permanent magnet synchronous machine (AFPMSM) specifically for reducing torque ripple. The proposed AFPMSM model uses pentagon-shaped permanent magnets (PMs). It has a low value of cogging torque and torque ripples compared to the conventional model with a trapezoidal magnet shape. Additionally, it has increased internal generated voltage (Ef) as compared to the conventional model. To further enhance Ef phases and minimize cogging torque of the proposed model, the proposed AFPMSM model was optimized by varying different sides of PMs using a genetic algorithm (GA). A time-stepped three-dimensional (3D) finite element analysis (FEA) was performed for the comparative analysis of conventional, proposed, and optimized AFPMSM models. From this comparative performance analysis, it is observed that torque ripples and cogging torque of the optimized AFPMSM are significantly decreased, while output average torque is appreciably increased. Ef and output power are also enhanced. [ABSTRACT FROM AUTHOR]

This paper proposes a new scheme for a brushless wound rotor synchronous machine (WRSM) by generating an additional, two-pole component of magneto-motive force (MMF) with a series-connected additional three-phase winding with the armature three-phase winding. Unlike existing brushless excitation schemes, which use the inverter to inject harmonic currents in the stator windings, the proposed scheme uses series-connected additional winding on the stator with the armature winding in a two-pole configuration. Consequently, as the current flows in the armature winding, it creates a fundamental rotating air gap flux to interact with the field flux. At the same time, additional rotating flux is created from the additional three-phase winding, which cannot synchronize with the field winding. This additional flux can cause the induction of a voltage in a winding with exactly the same number of poles. For this purpose, a harmonic winding is installed in the rotor along with the field winding connected through a diode bridge rectifier, in order to feed the direct current (DC) to the field winding for rotor excitation without an input current from the brush-slip-ring assembly. The 2D finite-element analysis (FEA) was performed to validate the brushless operation of the proposed machine system. [ABSTRACT FROM AUTHOR]

Summary: This paper proposes a simplified harmonic field‐excitation scheme for the brushless operation of wound‐rotor synchronous machines (WRSMs). The proposed scheme involves two inverters that are operating at different frequencies to provide an input current to the armature winding of the machine. One of these two inverters works at a frequency of 60 Hz and provides the regular three‐phase fundamental current, whereas the second inverter works at 180 Hz frequency to supply the single‐phase third‐harmonic to the common point of the start‐connected stator winding of the machine. The proposed method has the advantage that a conventional single‐phase inverter can be used for generating the third‐harmonic current which only needs to be operated at three times the frequency of the first inverter supplying the three‐phase fundamental current. The fundamental three‐phase current generates the main armature field, and the single‐phase third‐harmonic current produces a pulsating magnetomotive force, that induces electromotive force (EMF) in the harmonic winding of the rotor. The induced EMF is rectified to supply field current to the rotor and generates the rotor field. This field, when interacts with the main armature field, produces torque. The proposed brushless field‐excitation scheme for WRSMs is implemented in JMAG‐Designer version 19.1 using 2‐D finite element analysis to realize its operation and analyze its performance. [ABSTRACT FROM AUTHOR]

A new harmonic field excitation technique for the brushless operation of wound field synchronous machines (WFSMs) is proposed in this paper. The proposed scheme involves conventional three-phase and single-phase inverters operating at different frequencies and supply input current to the armature winding simultaneously. This results in a composite output current of the inverters, which contains fundamental as well as the third harmonic current components. The fundamental is utilized to develop the stator field, on the other hand, the third harmonic is used for developing the pulsating magnetomotive force (MMF) in the airgap. This MMF produces a harmonic current in the harmonic winding of the rotor which is later rectified to inject field current to the rotor field winding. The theoretical analysis of the proposed technique is supported using 2-D finite element analysis (FEA). [ABSTRACT FROM AUTHOR]

This manuscript discusses a novel harmonic current excitation technique for a wound rotor synchronous machine based on control of the time harmonic magneto-motive force (MMF) for brushless operation. Two inverters are used to feed the armature winding in such a way that at a time, one inverter supplies the current to armature winding. The two inverters are 180° phase-shifted. The inverter assignment is based on time-division multiplexing technique to generate continuous armature currents containing reasonable third-harmonic component beside fundamental component. This third-harmonic current component generates pulsating MMF and is induced in the rotor harmonic winding; the induced current is rectified and applied to rotor field winding to generate rotor field. The rotor field interacts with armature fundamental current component for torque generation. Finite element analysis is performed to verify the idea. [ABSTRACT FROM AUTHOR]

Different topologies for brushless wound rotor synchronous machines (BL-WRSMs) have been proposed recently. This paper proposes a new model for the existing sub-harmonically excited BL-WRSM to eliminate the unbalanced radial force presented in the initial model. The initial and proposed models are analyzed using a two-dimensional finite element method. Furthermore, a variable-speed analysis for the BL-WRSM is conducted by altering the stator input current. Finally, a prototype of the proposed model is built and tested at the rated speed, to compare its performance with that of the conventional WRSM. Simulation and experimental results validate the proposed BL-WRSM's operation. [ABSTRACT FROM AUTHOR]

This paper proposes an inverter scheme to generate an additional third-harmonic component alongside the fundamental component of the current. The generated third-harmonic component is used to achieve the brushless operation in a wound field synchronous machine (WFSM). Contrary to the traditional schemes used, i.e., dual inverter, single inverter with extra switches schemes, and single inverter with four transistor legs, the proposed scheme comprises a single inverter with three transistor legs that utilizes a modified third-harmonic injection pulse-width modulation. The brushless operation in WFSM requires two windings on the rotor periphery, i.e., harmonic winding and field winding that are interconnected through a rotating diode bridge rectifier. To maximize the usage of generated third-harmonic component, the selection of pole–slot combinations of the machine is carried out considering the winding factors. The proposed inverter scheme is verified in MATLAB, and a 2-D finite element analysis is used to validate the brushless operation of the machine along with its electromagnetic performance. [ABSTRACT FROM AUTHOR]

This paper discusses the design and analysis of a high-harmonic injection-based field excitation scheme for the brushless operation of wound field synchronous machines (WFSMs) in order to achieve a higher efficiency. The proposed scheme involves two inverters. One of these inverters provides the three-phase fundamental-harmonic current to the armature winding, whereas the second inverter injects the single-phase high-harmonic i.e., 6th harmonic current in this case, to the neutral-point of the Y-connected armature winding. The injection of the high-harmonic current in the armature winding develops the high-harmonic magnetomotive force (MMF) in the air gap of the machine beside the fundamental. The high-harmonic MMF induces the harmonic current in the excitation winding of the rotor, whereas the fundamental MMF develops the main armature field. The harmonic current is rectified to inject the direct current (DC) into the main rotor field winding. The main armature and rotor fields, when interacting with each other, produce torque. Finite element analysis (FEA) is carried out in order to develop a 4-pole 24-slot machine and investigate it using a 6th harmonic current injection for the rotor field excitation to both attain a brushless operation and analyze its electromagnetic performance. Later on, the performance of the proposed topology is compared with the typical brushless WFSM topology employing the 3rd harmonic current injection-based field excitation scheme. [ABSTRACT FROM AUTHOR]

This paper presents a new high-efficient three-phase brushless wound rotor synchronous machine (BL-WRSM) based on a sub-harmonic field excitation technique. In the proposed machine topology, the stator is equipped with two different three-phase windings: (1) main armature winding, and (2) additional armature winding. The main armature winding is based on a 4-pole winding configuration, whereas the additional armature winding is based on a 2-pole winding configuration. Both windings are supplied current from two different inverters, i.e., inverter-1, inverter-2, and simultaneously. Inverter-1 provides the regular input current to the main armature winding, whereas inverter-2 provides a three-phase current of low magnitude to the 2-pole additional armature winding. This generates an additional sub-harmonic component of MMF in the airgap beside the fundamental MMF. On the other side, the rotor is equipped with (1) harmonic, and (2) field windings. These windings are electrically coupled via a rectifier. The fundamental component of MMF produces the main rotating magnetic field, whereas the sub-harmonic MMF gets induced in the harmonic winding to produce harmonic current. This current is rectified to give DC to the rotor field winding to attain brushless operation. To authenticate the operation and analyze its performance, the proposed BL-WRSM topology is supported using 2-D finite element analysis (FEA) in JMAG-Designer. Later on, the performance of the proposed brushless topology is compared with the customary BL-WRSM topology to verify its high efficiency, high output torque, low torque ripple, and low unbalanced radial force on the rotor. [ABSTRACT FROM AUTHOR]

In this paper, a hexagonal magnet shape is proposed to have an arc profile capable of reducing torque ripples resulting from cogging torque in a single-sided axial flux permanent magnet (AFPM) machine. The arc-shaped permanent magnet increases the air-gap length effectively and makes the flux of the air-gap more sinusoidal, which decreases air-gap flux density and hence causes a reduction in cogging torque. Cogging torque is the basic source of vibration, along with the noise in PM machines, since it is the main cause of torque ripples. Cogging torque is independent of the load current and is proportional to the air-gap flux and the reluctance variation. Three-dimensional finite element analysis (FEA) is used in the JMAG-Designer to analyze the performance of the conventional and proposed hexagonal-shaped PM AFPM machines. The proposed shape is designed to reduce cogging torque, and the voltage remains the same as compared to the conventional hexagonal-shaped PM machine. Further, optimization is performed by utilizing an asymmetric overhang. Latin hypercube sampling (LHS) is used to create samples, the kriging method is applied to approximate the model, and a genetic algorithm is applied to obtain the optimum parameters of the machine. [ABSTRACT FROM AUTHOR]

In an open-winding machine, three-phase stator currents can be controlled such that the input armature currents may contain the third-harmonic current component in addition to the fundamental. Considering this attribute of open-winding patterns, a harmonic current field excitation technique for a wound rotor synchronous machine (WRSM) is proposed in this paper based on the control of time-harmonic magneto-motive force. Two inverters connected to both terminals of the stator winding are controlled so that the input armature current generates an additional third-harmonic current component. This third-harmonic component generates a vibrating magnetic field that induces a current in the specially designed rotor harmonic winding. The current is supplied as DC current to the rotor excitation winding to generate a rotor field by using a full-bridge diode rectifier in order to achieve brushless operation. The proposed dual-inverter-controlled brushless operation for a WRSM is executed in ANSYS Maxwell using 2-D finite element analysis to validate its operation and electromagnetic performance. [ABSTRACT FROM AUTHOR]