Search

The performance of a flexible transparent conductive electrode with extremely smooth topography capable of withstanding thermal processing at 300 °C for at least 6 h with little change in sheet resistance and optical clarity is reported. In depth investigation is performed on atomic layer deposition (ALD) deposited ZnO on Ag nanowires (NWs) with regard to thermal and atmospheric corrosion stability. The ZnO coated nanowire networks are embedded within the surface of a polyimide matrix, and the <2 nm roughness freestanding ­electrode is used to fabricate a white polymer light emitting diode (PLED). PLEDs obtained using the ZnO-AgNW-polyimide substrate exhibit comparable performance to indium tin oxide (ITO)/glass based devices, verifying its efficacy for use in optoelectronic devices requiring high processing temperatures. [ABSTRACT FROM AUTHOR]

It has been a challenge to develop a new transparent conductor to replace the brittle and expensive indium tin oxide (ITO) film to make film heater with high transmittance in the visible wavelength range, high surface conductivity and mechanical flexibility. Here, we report the synthesis of a transparent composite film comprising a silver nanowire (AgNW) percolation network inlaid in the surface of a heat-resistant polymer film. This composite conductor has a figure-of-merit sheet resistance of 25 Ω · sq−1 with 86.4% transmittance at 550 nm. The composite film possesses outstanding heat-resistant property and can generate high temperature up to 230 °C at low operation voltages as an efficient thin film heater. Compared with the film heaters previously reported, the composite film heater shows faster heating response and higher saturation temperature under the same input voltage. The film heater could be bent to 10 mm diameter and the generated temperature decreased by less than 3 °C after 3 000 bending cycles. [ABSTRACT FROM AUTHOR]