Search

Solar-powered air conditioners offer a high potential for energy-efficient cooling with a high economic feasibility. They can significantly reduce the energy consumption in the building sector, which is essential to meet the greater ambition of reducing greenhouse gas emissions by 80% in the EU by 2050. This paper presents a computational model development capable of simulating the behaviour of a photovoltaic-assisted heat pump in different locations and working conditions. In addition, this model has been used to optimise a solar on-grid air conditioning system. The generated model has been validated with experimental data obtained in a real facility for a whole summer of operation (more than 100 tested days) in a Mediterranean climate (Alicante, Spain). According to the simulation results, the average Energy Efficiency Ratio (EER) of the system is 16.0, 10.7 and 7.8 in Barcelona, Madrid and Seville, respectively. The optimisation analysis has proven that the severity of the climatic region increases the costs as well as the optimum PV power to drive the AC unit. The obtained values for the the PV power and the annualised cost are 400 W and 506.2 € for Barcelona, 900 W and 536.7 € for Madrid, and 1300 W and 564.7 € for Seville. The annualised cost and the CO 2 emission levels are higher for the conventional system (no PV panels) than for the solar on-grid system, regardless of the installed PV power. This difference can be up to 66.64 € (10.55%) and 112.94 kg CO 2 (64.83%) per summer season in the case of Seville. [ABSTRACT FROM AUTHOR]

• Use of solar energy source in ground source heat pump applications. • Comparison of solar thermal collectors and photovoltaic hybrid panels. • Effects of climate on thermal and energy behaviour of the SAGSHP system. • The use of PVT panels increases the global COP of the system. • The multi-source energy system increases RES exploitation. The use of multi-source energy systems is a promising technical solution for the reduction of greenhouse gases emissions and, at the meantime, for enhancing the exploitation of renewable energy sources. The present paper analyses a Solar Assisted Ground Source Heat Pump system and tries to fill the gap in the literature, where a direct comparison between the consolidated solar thermal technology and the emerging and widely discussed photovoltaic thermal technology is missing. Indeed, the two different devices for the exploitation of solar energy have been analysed through dynamic simulations carried out in TRNSYS environment. Through this approach, it is possible to investigate and predict in detail the thermal and electrical behaviour of the energy system, composed by a water-to-water heat pump, which withdraws from two thermal reservoirs that are connected to a solar loop, composed either of solar thermal collectors or of photovoltaic thermal panels and to a ground loop. The heat pump is used to provide space cooling and space heating to a residential building, through fan coil terminal units or radiant floor system. Furthermore, the heat pump system assists the solar field in the production of domestic hot water. This study looks at the development of a flexible system able to work in different operating conditions. The model's boundary conditions can be changed for simulating a variety of case studies as the weather condition, the building load and the domestic hot water profile can be easily changed, together with specific components' parameters. The control strategy makes it possible to vary the setpoint temperatures for simulating different operating conditions and management choices. In this way, the user can easily adapt the model functions to a specific plant system. The operating conditions of the two systems layouts have been compared and the energy performances evaluated for three case studies characterised by the weather conditions of the European cities of Berlin (mild-cold climate), Venice (mild climate) and Barcelona (mild-warm climate), and the corresponding thermal load profile of a two-storey building with a useful floor area of 170 m2. The study shows the possibility to directly exploit the solar energy for the domestic hot water production and as a heat source for the heat pump. The results from the comparison between the two systems' configurations, with photovoltaic thermal panels and with solar thermal collectors, prove that there is the possibility to obtain a relevant improvement in the efficiency of the heat pump using photovoltaic thermal panels. The investigated multi-source energy system, moreover, allows an optimal employment of the available renewable heat sources and could easily be applied to case studies characterized by different boundary conditions. [ABSTRACT FROM AUTHOR]