Search

The significance of fuzzy volume percentage on the unsteady flow of MHD tangent hyperbolic fuzzy hybrid nanofluid towards an exponentially stretched surface is scrutinized. The heat transport mechanism is classified by Joule heating, nonlinear thermal radiation, boundary slippage, and convective circumstances. Ethylene glycol (EG) as a host fluid along with the nanomaterial's Cu and Al 2 O 3 are used for heat transfer analysis is also considered in this investigation. The nonlinear governing PDEs are meant to be converted into ODEs employing appropriate renovations. Then, a built-in MATLAB program bvp4c is employed to acquire the outcome of the given problem. The variation of flow rate, thermal heat, drag force and Nusselt number and their influence on fluid flow with heat transfer have been scrutinized through graphs. An increase in thermal radiation, power law index and nanoparticle volume friction heightens the heat transmission rate. Skin friction is diminished by swelling the power-law index, Weissenberg number, and ratio parameters, whereas it is increased by enhancing the magnetic parameter. The heat transfer rate upsurges with an increase in Weissenberg number and nanoparticle volume fraction. Also, the nanoparticle volume percentage is expressed as a triangular fuzzy number (TFN). The triangular membership function (MF) and TFN are regulated by the χ - cut parameter, which has a range of 0 to 1. In comparison to nanofluids, hybrid nanofluids have a higher heat transmission rate, according to the fuzzy analysis. This investigation has applications in the areas of paper manufacturing, metal sheet cooling and crystal growth. [ABSTRACT FROM AUTHOR]

This contribution aims to optimize nonlinear thermal flow for Darcy-Forchheimer Maxwell fuzzy Al 2 O 3 + Cu + TiO 2 /EO tri-hybrid nanofluid flow across a Riga wedge in the context of boundary slip. Three types of nanomaterials, Al 2 O 3 , Cu and TiO 2 have been mixed into the basic fluid known as engine oil. Thermal properties with the effects of porous surface and nonlinear convection have been established for the particular combination Al 2 O 3 + Cu + TiO 2 /EO. Applying a set of appropriate variables, the set of equations that evaluated the energy and flow equations was transferred to the dimensionless form. For numerical computing, the MATLAB software's bvp4c function is used. The graphical display is used to demonstrate the influence of several influential parameters. It has been observed that flow rate decay with expansion in porosity parameter and nanoparticles volumetric fractions. In contrast, it rises with wedge angle, Grashof numbers, Darcy-Forchheimer, nonlinear Grashof numbers, and Maxwell fluid parameter. Thermal profiles increase with progress in the heat source, nanoparticles volumetric fractions, viscous dissipation, and nonlinear thermal radiation. The percentage increases in drag force for ternary hybrid nanofluid are 13.2 and 8.44 when the Modified Hartmann number takes input in the range 0.1 ≤ Mh ≤ 0.3 and wedge angle parameters 0.1 ≤ m ≤ 0.3 . For fuzzy analysis, dimensionless ODEs transformed into fuzzy differential equations and employed symmetrical triangular fuzzy numbers (TFNs). The TFN makes a triangular membership function (M.F.) that describes the fuzziness and comparison. This study compared nanofluids, hybrid nanofluids, and ternary nanofluids through triangular M.F. The boundary layer flow caused by a wedge surface plays a crucial role in heat exchanger systems and geothermal. [ABSTRACT FROM AUTHOR]

This contribution aims to optimize nonlinear thermal flow for Darcy-Forchheimer Maxwell fuzzy Al 2 O 3 + Cu + TiO 2 /EO tri-hybrid nanofluid flow across a Riga wedge in the context of boundary slip. Three types of nanomaterials, Al 2 O 3 , Cu and TiO 2 have been mixed into the basic fluid known as engine oil. Thermal properties with the effects of porous surface and nonlinear convection have been established for the particular combination Al 2 O 3 + Cu + TiO 2 /EO. Applying a set of appropriate variables, the set of equations that evaluated the energy and flow equations was transferred to the dimensionless form. For numerical computing, the MATLAB software's bvp4c function is used. The graphical display is used to demonstrate the influence of several influential parameters. It has been observed that flow rate decay with expansion in porosity parameter and nanoparticles volumetric fractions. In contrast, it rises with wedge angle, Grashof numbers, Darcy-Forchheimer, nonlinear Grashof numbers, and Maxwell fluid parameter. Thermal profiles increase with progress in the heat source, nanoparticles volumetric fractions, viscous dissipation, and nonlinear thermal radiation. The percentage increases in drag force for ternary hybrid nanofluid are 13.2 and 8.44 when the Modified Hartmann number takes input in the range 0.1 ≤ Mh ≤ 0.3 and wedge angle parameters 0.1 ≤ m ≤ 0.3 . For fuzzy analysis, dimensionless ODEs transformed into fuzzy differential equations and employed symmetrical triangular fuzzy numbers (TFNs). The TFN makes a triangular membership function (M.F.) that describes the fuzziness and comparison. This study compared nanofluids, hybrid nanofluids, and ternary nanofluids through triangular M.F. The boundary layer flow caused by a wedge surface plays a crucial role in heat exchanger systems and geothermal. [ABSTRACT FROM AUTHOR]

The significance of fuzzy volume percentage on the unsteady flow of MHD tangent hyperbolic fuzzy hybrid nanofluid towards an exponentially stretched surface is scrutinized. The heat transport mechanism is classified by Joule heating, nonlinear thermal radiation, boundary slippage, and convective circumstances. Ethylene glycol (EG) as a host fluid along with the nanomaterial's Cu and Al 2 O 3 are used for heat transfer analysis is also considered in this investigation. The nonlinear governing PDEs are meant to be converted into ODEs employing appropriate renovations. Then, a built-in MATLAB program bvp4c is employed to acquire the outcome of the given problem. The variation of flow rate, thermal heat, drag force and Nusselt number and their influence on fluid flow with heat transfer have been scrutinized through graphs. An increase in thermal radiation, power law index and nanoparticle volume friction heightens the heat transmission rate. Skin friction is diminished by swelling the power-law index, Weissenberg number, and ratio parameters, whereas it is increased by enhancing the magnetic parameter. The heat transfer rate upsurges with an increase in Weissenberg number and nanoparticle volume fraction. Also, the nanoparticle volume percentage is expressed as a triangular fuzzy number (TFN). The triangular membership function (MF) and TFN are regulated by the χ - cut parameter, which has a range of 0 to 1. In comparison to nanofluids, hybrid nanofluids have a higher heat transmission rate, according to the fuzzy analysis. This investigation has applications in the areas of paper manufacturing, metal sheet cooling and crystal growth. [ABSTRACT FROM AUTHOR]

Nanofluids are advanced class of heat transfer fluids that are in trend due to their high thermophysical properties over the past two decades. However, there are some limitations and restrictions that are needed to be removed before nanofluids can be commercialized. The main issues are the low stability and shelf life of such fluids which mask the potential usage of nanofluids in applications such as oil recovery, heat exchangers, drug delivery and lubricant. Hence, challenging task of stabilizing the nanofluid is key concern in capitalizing the nanofluids. In this study, the aim is to explore the previous literature related to stability and thermophysical properties of nanofluid for better understanding. [ABSTRACT FROM AUTHOR]

The aim of this project is to fabricate a highly stable Fe3O4-OA-MWCNT composite and its colloidal suspension in polyalphaolefin (PAO) base fluid for heat transfer applications. The nanocomposite was produced in three mass ratios (0.5 : 1, 1 : 1, and 1.5 : 1) to explore the concentration effects on the stability of the nanocomposite. XRD analysis and FTIR spectroscopy were conducted to inspect the phase and composition of the synthesized nanocomposite. The crystallite sizes (3.75 nm, 7.74 nm, and 7.52 nm) and dislocation densities of each composite were calculated, and it was revealed that the samples with high concentration of iron oxide nanoparticles showed small defects in their lattices. Dispersion stability of ferrofluids was also examined by natural deposition method for 365 days. The ferrofluids displayed high stability for more than one year with no sign of sedimentation. Thermal conductivity of the nanofluid was also measured via. A transient plane source method and a linear trend with slight deviation were observed. [ABSTRACT FROM AUTHOR]

In this work, the heat transfer features and stagnation point flow of Magnetohydrodynamics (MHD) hybrid second-grade nanofluid through a convectively heated permeable shrinking/stretching sheet is reported. The purpose of the present investigation is to consider hybrid nanofluids comprising of Alumina Al 2 O 3 and Copper Cu nanoparticles within the Sodium Alginate (SA) as a host fluid for boosting the heat transfer rate. Also, the effects of free convection, viscous dissipation, heat source/sink, and nonlinear thermal radiation are considered. The converted nonlinear coupled fuzzy differential equations (FDEs) with the help of triangular fuzzy numbers (TFNs) are solved using the numerical scheme bvp4c. The numerical results are acquired for various engineering parameters to study the Nusselt number, skin friction coefficient, velocity, and temperature distribution through figures and tables. For the validation, the current numerical results were found to be good as compared to existing results in limiting cases. It is also inspected by this work that with the enhancement of the volume fraction of nanoparticles, the heat transfer rate also increases. So, it may be taken as a fuzzy parameter for a better understanding of fuzzy variables. For the comparison, the volume fraction of nanofluids and hybrid nanofluid are said to be TFN [0, 0.1, 0.2]. In the end, we can see that fuzzy triangular membership functions (MFs) have not only helped to overcome the computational cost but also given better accuracy than the existent results. Finding from fuzzy MFs, the performance of hybrid nanofluids is better than nanofluids. [ABSTRACT FROM AUTHOR]

In this work, Polyalphaolefin oil-based hybrid nanofluid containing Fe3O4/MWCNT nanocomposite has been prepared to consider the impact of volume fraction on thermal conductivity through graphical representation. The heat transfer of the prepared nanofluids is investigated via adjusting the surface morphology, molar ratios and size of the nanocomposite. Phase and composition of the synthesized sample was inspected through XRD and FTIR spectroscopy. The average crystallite size was observed to be 7.74 nm from Debye-Scherrer equation. Thermophysical parameters such as diffusivity, specific heat and thermal conductivity were measured through transient plane source method. The sample showed 2% enhancement in thermal conductivity with addition of nano composite as compared to pure polyalphaolefin oil for 0.7 wt.% at 50℃ and this value declined when shifted towards very high temperatures. Similarly, thermal diffusivity and specific heat also showed a linear trend as a function of volume fraction. This shows that the prepared nano fluid contains high stability and thermal conductivity as compared to conventional lubricant (i.e., PAO) and has potential in heat transfer applications as a lubricant and heat transfer fluid. [ABSTRACT FROM AUTHOR]