Search

An open-end winding machine configuration and a suitable control strategy for medium-voltage ac motor drives applications are proposed in this paper in order to reduce the distortion of phase voltages in multilevel inverters (MLIs). Differently than standard open-end winding configurations, where two inverters provide active power to both sides of the stator winding, a main MLI supplies in this case the machine on one side, while an auxiliary two-level inverter acts as active power filter on the other side. A high efficiency step modulation manages the MLI, while the auxiliary unit is pulse width modulation (PWM) operated. As the phase current harmonic content is improved, the torque ripple is reduced and the drive efficiency is increased. By exploiting the proposed approach, the apparent switching frequency of the system is that typical of a PWM inverter, although the main unit is operated according to a voltage step modulation strategy. Simulation and experimental results confirm the consistency of the proposed methodology. [ABSTRACT FROM PUBLISHER]

The paper deals with the analysis and implementation of a vector control strategy devoted to integrated multidrive systems used in starter alternator applications with several dc buses at different voltage levels. The electromechanical system of the considered multidrive topology is obtained by splitting the conventional stator winding of an induction machine into different n three-phase subunits, maintaining the same magnetomotive force distribution and sharing the same rotor. Each stator unit together with rotor can be considered a submotor, thus the entire electromagnetic system behavior can be considered as the combination of all submotors contributions. The submotors are suitably supplied through standard three-phase inverters whose technical specifications are also established according to the storage unit voltage levels. First, a detailed mathematical representation of the electromagnetic system has been developed, then the conditions to carry out the field orientation in each generic subdrive are determined. Addressing a starter-alternator system, the integrated multidrive configuration has been experimentally tested, highlighting the capability of the proposed approach to efficiently handle multidirectional power flows among the storage units and mechanical system while ensuring high dynamic performance. [ABSTRACT FROM AUTHOR]

Due to their inner structural redundancy, ac multidrive systems (MDSs) can achieve a fault-tolerance capability with minor circuit modifications. However, some additional components are generally required in order to create emergency current paths. According to a recently presented approach, the amount of additional components can be reduced by exploiting healthy drives to support faulty drives. This can be obtained by connecting together the neutral points of motor stator windings and suitably sharing the neutral current of faulty units among some, or all, healthy units. Following such an approach, three current-sharing methodologies for fault-tolerant MDSs are presented in this paper, which are able to cope with single or multiple failures. They are first theoretically introduced and then validated by mean of simulations and experimental test results. [ABSTRACT FROM PUBLISHER]

A technique to improve the performance of grid-connected induction motors by exploiting an auxiliary winding set is proposed in this paper. This auxiliary winding features the same distribution of the main winding, although with a reduced number of turns and it is fed by an inverter a fraction of the power in comparison with the rated size of the induction motor. As shown in the paper, through the auxiliary winding, it is possible to set the machine power factor, increasing the efficiency of the power conversion system and mitigating speed oscillations due to torque disturbances. A mitigation of the grid current peaks due to motor start-up is obtainable. First, the proposed technique is theoretically introduced, then a feasibility assessment is accomplished by simulations. [ABSTRACT FROM AUTHOR]