Search

This article introduces an efficient modeling approach based on the Wiener structure to reinforce the capacity of classical equivalent circuit models (ECMs) in capturing the nonlinearities of lithium-ion (Li-ion) batteries. The proposed block-oriented modeling architecture is composed of a simple linear ECM followed by a static output nonlinearity block, which helps achieving a superior nonlinear mapping property while maintaining the real-time efficiency. The observability of the established battery model is analytically proven. This article also introduces an efficient parameter estimator based on extended-kernel iterative recursive least squares algorithm for real-time estimation of the parameters of the proposed Wiener model. The proposed approach is applied for state-of-charge (SoC) estimation of 3.4-Ah 3.6-V nickel-manganese-cobalt-based Li-ion cells using the extended Kalman filter (EKF). The results show about 1.5% improvement in SoC estimation accuracy compared with the EKF algorithm based on the second-order ECM. A series of real-time tests are also carried out to demonstrate the computational efficiency of the proposed method. [ABSTRACT FROM AUTHOR]

Parasitic capacitance has a considerable impact on conductive electromagnetic interference (EMI), especially on the common mode (CM) noise. In vehicular applications, such as more electric aircraft and electrical vehicles, the value of CM stray capacitance can vary during the drive cycle, due to some change in environmental, and operating conditions, resulting in fluctuations in EMI level. Designing EMI filters according to potentially overestimated CM capacitance results in additional weight, volume, and cost which should be avoided. In this paper, for the first time, the parasitic capacitance relevant to CM noise is estimated in real-time using unscented Kalman filter (UKF). The UKF is employed due to its ability in dealing with nonlinearity and stochastic nature of the EMI as well as the measurement noises. The proposed method is tested on a typical dc–dc buck converter in different operating conditions. The effectiveness of the proposed method is tested using some hardware-in-the-loop experiments using dSPACE1104 development platform. [ABSTRACT FROM AUTHOR]

Online accurate estimation of supercapacitor state-of-health (SoH) and state-of-energy (SoE) is essential to achieve efficient energy management and real-time condition monitoring in electric vehicle (EV) applications. In this article, for the first time, unscented Kalman filter (UKF) is used for online parameter and state estimation of the supercapacitor. In the proposed method, a nonlinear state-space model of the supercapacitor is developed, which takes the capacitance variation and self-discharge effects into account. The observability of the considered model is analytically confirmed using a graphical approach. The SoH and SoE are then estimated based on the supercapacitor online identified model with the designed UKF. The proposed method provides better estimation accuracy over Kalman filter (KF) and extended KF algorithms since the linearization errors during the filtering process are avoided. The effectiveness of the proposed approach is demonstrated through several experiments on a laboratory testbed. An overall estimation error below 0.5% is achieved with the proposed method. In addition, hardware-in-the-loop experiments are conducted and real-time feasibility of the proposed method is guaranteed. [ABSTRACT FROM AUTHOR]

This paper deals with a new application for a special sort of Rogowski coil (RC) sensor in real-time estimation of diode turn-OFF energy loss. The turn-OFF energy loss of power diode is a key metric in designing power electronics circuits. The estimation accuracy of the diode turn-OFF energy loss significantly depends on the accurate extraction of diode reverse-recovery parameters during the turn-OFF process. By far, many methods have been proposed for offline estimation of diode reverse-recovery parameters. However, online estimation of these parameters can also provide worthwhile information for real-time monitoring of power diode and operating power electronics circuit. Specifically, the online estimated energy loss includes information which can be interpreted to obtain general ideas about the diode junction temperature, health status of snubber circuits, and so on. In this paper, a novel approach for online estimation of turn-OFF energy loss of power diodes using an efficient double-layer printed circuit board RC (DLPCBRC) sensor is proposed. The sensor is designed and utilized to acquire the key reverse-recovery parameters of the diode. Based on the extracted reverse-recovery parameters, a sufficiently good estimation of diode turn-OFF energy loss is obtained in real-time. The simulation and experimental results on a typical diode in a boost DC–DC converter are presented to demonstrate the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]