Search

Rockfalls are a recurrent cause of disruption for transportation corridors running along the bottom of U-shaped alpine valleys. In some scenarios, risk may effectively be reduced only by implementing an early-warning system able to give notice of incipient failures on the slope. This paper describes a successful example of rockfall forecasting and risk management in proximity of the Gallivaggio sanctuary (San Giacomo Valley, Central Italian Alps). Since 2016, a Ground-Based Synthetic Aperture Radar continuously monitored a roughly 500-m high, sub-vertical granitic slope. Monitoring data evidenced the presence and continued movement of a ~ 5000 m3 highly unstable mass, having a projected fall trajectory directly threatening the sanctuary and the adjacent segment of a national road. Traffic and access to the sanctuary were regulated by a sequence of alert thresholds, and restrictive orders were issued according to the activity of the instability. The rock mass eventually fell, and the failure-time was accurately predicted several hours in advance. Despite damage to both the road and buildings, the timely evacuation of the area prevented any loss of life. The case study provides a reference framework to better manage rockfall risk in areas where the installation of adequate protective barriers is not technically feasible. [ABSTRACT FROM AUTHOR]

The evaluation of landslide specific risk, defined as the expected degree of loss due to landslides, requires the parameterization and the combination of a number of socio-economic and geological factors, which often needs the interaction of different skills and expertise (geologists, engineers, planners, administrators, etc.). The specific risk sub-components, i.e., hazard and vulnerability of elements at risk, can be determined with different levels of detail depending on the available auxiliary data and knowledge of the territory. These risk factors are subject to short-term variations and nowadays turn out to be easily mappable and evaluable through remotely sensed data and GIS (Geographic Information System) tools. In this work, we propose a qualitative approach at municipal scale for producing a "specific risk" map, supported by recent satellite PSI (Persistent Scatterer Interferometry) data derived from SENTINEL-1 C-band images in the spanning time 2014-2017, implemented in a GIS environment. In particular, PSI measurements are useful for the updating of a landslide inventory map of the area of interest and are exploited for the zonation map of the intensity of ground movements, needed for evaluating the vulnerability over the study area. Our procedure is presented throughout the application to the Volterra basin and the output map could be useful to support the local authorities with updated basic information required for environmental knowledge and planning at municipal level. Moreover, the proposed procedure is easily managed and repeatable in other case studies, as well as exploiting different SAR sensors in L- or X-band. [ABSTRACT FROM AUTHOR]

This work is focused on deformation activity mapping and monitoring using Sentinel-1 (S-1) data and the DInSAR (Differential Interferometric Synthetic Aperture Radar) technique. The main goal is to present a procedure to periodically update and assess the geohazard activity (volcanic activity, landslides and ground-subsidence) of a given area by exploiting the wide area coverage and the high coherence and temporal sampling (revisit time up to six days) provided by the S-1 satellites. The main products of the procedure are two updatable maps: the deformation activity map and the active deformation areas map. These maps present two different levels of information aimed at different levels of geohazard risk management, from a very simplified level of information to the classical deformation map based on SAR interferometry. The methodology has been successfully applied to La Gomera, Tenerife and Gran Canaria Islands (Canary Island archipelago). The main obtained results are discussed. [ABSTRACT FROM AUTHOR]

Landslides are common phenomena that occur worldwide and are a main cause of loss of life and damage to property. The hazards associated with landslides are a challenging concern in many countries, including Italy. Over the last 15 years, an increasing number of applications have aimed to demonstrate the applicability of images captured by space-borne Synthetic Aperture Radar (SAR) sensors in slope instability investigations. InSAR (SAR interferometry) is currently one of the most exploited techniques for the assessment of ground displacements, and it is becoming a consolidated tool for Civil Protection institutions in addressing landslide risk. This paper presents a subset of the results obtained in Italy within the framework of SAR-based programmes and applications intended to test the potential application of C- and X-band satellite interferometry during different Civil Protection activities (namely prevention, prevision, emergency response and post-emergency phases) performed to manage landslide risk. Analysis of satellite SAR data is demonstrated to play a major role in the investigation of landslide-related events at different stages, including detection, mapping, monitoring, characterization and prediction. In addition, this paper also discusses the limitations that still exist and must be overcome in the coming years to manage the transition of satellite SAR systems towards complete operational use in landslide risk management practices. [ABSTRACT FROM AUTHOR]

Permanent Scatterer Interferometry (PSI) has been used to detect and characterize the subsidence of the Pisa urban area, which extends for 33 km² within the Arno coastal plain (Tuscany, Italy). Two SAR (Synthetic Aperture Radar) datasets, covering the time period from 1992 to 2010, were used to quantify the ground subsidence and its temporal evolution. A geotechnical borehole database was also used to make a correspondence with the detected displacements. Finally, the results of the SAR data analysis were contrasted with the urban development of the eastern part of the city in the time period from 1978 to 2013. ERS 1/2 (European Remote-Sensing Satellite) and Envisat SAR data, processed with the PSInSAR (Permanent Scatterer InSAR) algorithm, show that the investigated area is divided in two main sectors: the southwestern part, with null or very small subsidence rates (<2 mm/year), and the eastern portion which shows a general lowering with maximum deformation rates of 5 mm/year. This second area includes deformation rates higher than 15 mm/year, corresponding to small groups of buildings. The case studies in the eastern sector of the urban area have demonstrated the direct correlation between the age of construction of buildings and the registered subsidence rates, showing the importance of urbanization as an accelerating factor for the ground consolidation process. [ABSTRACT FROM AUTHOR]

Multi-Temporal Satellite Interferometry (MTInSAR) is gradually evolving from being a tool developed by the scientific community exclusively for research purposes to a real operational technique that can meet the needs of different users involved in geohazard mitigation. This work aims at showing the innovative operational use of satellite radar interferometric products in Civil Protection Authority (CPA) practices for monitoring slow-moving landslides. We present the example of the successful ongoing monitoring system in the Valle D'Aosta Region (VAR-Northern Italy). This system exploits well-combined MTInSAR products and ground-based instruments for landslide management and mitigation strategies over the whole regional territory. Due to the critical intrinsic constraints of MTInSAR data, a robust regional satellite monitoring integrated into CPA practices requires the support of both in situ measurements and remotely sensed systems to guarantee the completeness and reliability of information. The monitoring network comprises three levels of analysis: Knowledge monitoring, Control monitoring, and Emergency monitoring. At the first monitoring level, MTInSAR data are used for the preliminary evaluation of the deformation scenario at a regional scale. At the second monitoring level, MTInSAR products support the prompt detection of trend variations of radar benchmarks displacements with bi-weekly temporal frequency to identify active critical situations where follow-up studies must be carried out. In the third monitoring level, MTInSAR data integrated with ground-based data are exploited to confirm active slow-moving deformations detected by on-site instruments. At this level, MTInSAR data are also used to carry out back analysis that cannot be performed by any other tool. From the example of the Valle D'Aosta Region integrated monitoring network, which is one of the few examples of this kind around Europe, it is evident that MTInSAR provides a great opportunity to improve monitoring capabilities within CPA activities. [ABSTRACT FROM AUTHOR]

Underground mining is one of the human activities with the highest impact in terms of induced ground motion. The excavation of the mining levels creates pillars, rooms and cavities that can evolve in chimney collapses and sinkholes. This is a major threat where the mining activity is carried out in an urban context. Thus, there is a clear need for tools and instruments able to precisely quantify mining-induced deformation. Topographic measurements certainly offer very high spatial accuracy and temporal repeatability, but they lack in spatial distribution of measurement points. In the past decades, Multi-Temporal Satellite Interferometry (MTInSAR) has become one of the most reliable techniques for monitoring ground motion, including mining-induced deformation. Although with well-known limitations when high deformation rates and frequently changing land surfaces are involved, MTInSAR has been exploited to evaluate the surface motion in several mining area worldwide. In this paper, a detailed scale MTInSAR approach was designed to characterize ground deformation in the salt solution mining area of Saline di Volterra (Tuscany Region, central Italy). This mining activity has a relevant environmental impact, depleting the water resource and inducing ground motion; sinkholes are a common consequence. The MTInSAR processing approach is based on the direct integration of interferograms derived from Sentinel-1 images and on the phase splitting between low (LF) and high (HF) frequency components. Phase unwrapping is performed for the LF and HF components on a set of points selected through a "triplets closure" method. The final deformation map is derived by combining again the components to avoid error accumulation and by applying a classical atmospheric phase filtering to remove the remaining low frequency signal. The results obtained reveal the presence of several subsidence bowls, sometimes corresponding to sinkholes formed in the recent past. Very high deformation rates, up to −250 mm/yr, and time series with clear trend changes are registered. In addition, the spatial and temporal distribution of velocities and time series is analyzed, with a focus on the correlation with sinkhole occurrence. [ABSTRACT FROM AUTHOR]

Landslides recurrently impact the Italian territory, producing huge economic losses and casualties. Because of this, there is a large demand for monitoring tools to support landslide management strategies. Among the variety of remote sensing techniques, Interferometric Synthetic Aperture Radar (InSAR) has become one of the most widely applied for landslide studies. This work reviews a variety of InSAR-related applications for landslide studies in Italy. More than 250 papers were analyzed in this review. The first application dates back to 1999. The average production of InSAR-related papers for landslide studies is around 12 per year, with a peak of 37 papers in 2015. Almost 70% of the papers are written by authors in academia. InSAR is used (i) for landslide back analysis (3% of the papers); (ii) for landslide characterization (40% of the papers); (iii) as input for landslide models (7% of the papers); (iv) to update landslide inventories (15% of the papers); (v) for landslide mapping (32% of the papers), and (vi) for monitoring (3% of the papers). Sixty-eight percent of the authors validated the satellite results with ground information or other remote sensing data. Although well-known limitations exist, this bibliographic overview confirms that InSAR is a consolidated tool for many landslide-related applications. [ABSTRACT FROM AUTHOR]

This work describes a new procedure aimed to semi-automatically identify clusters of active persistent scatterers and preliminarily associate them with different potential types of deformational processes over wide areas. This procedure consists of three main modules: (i) ADAfinder, aimed at the detection of Active Deformation Areas (ADA) using Persistent Scatterer Interferometry (PSI) data; (ii) LOS2HV, focused on the decomposition of Line Of Sight (LOS) displacements from ascending and descending PSI datasets into vertical and east-west components; iii) ADAclassifier, that semi-automatically categorizes each ADA into potential deformational processes using the outputs derived from (i) and (ii), as well as ancillary external information. The proposed procedure enables infrastructures management authorities to identify, classify, monitor and categorize the most critical deformations measured by PSI techniques in order to provide the capacity for implementing prevention and mitigation actions over wide areas against geological threats. Zeri, Campiglia Marittima–Suvereto and Abbadia San Salvatore (Tuscany, central Italy) are used as case studies for illustrating the developed methodology. Three PSI datasets derived from the Sentinel-1 constellation have been used, jointly with the geological map of Italy (scale 1:50,000), the updated Italian landslide and land subsidence maps (scale 1:25,000), a 25 m grid Digital Elevation Model, and a cadastral vector map (scale 1:5000). The application to these cases of the proposed workflow demonstrates its capability to quickly process wide areas in very short times and a high compatibility with Geographical Information System (GIS) environments for data visualization and representation. The derived products are of key interest for infrastructures and land management as well as decision-making at a regional scale. [ABSTRACT FROM AUTHOR]

Persistent Scatterer Interferometry (PSI) is a consolidated tool for detecting and monitoring ground surface displacements. The availability of satellite data with free access policy and high monitoring capabilities (in terms of resolution and acquisition frequency) is increasing. Moreover, the first continental displacement map of Europe will be freely available in quarter one 2022 by the latest Copernicus Service, the European Ground Motion Service (EGMS). The EGMS will provide ground displacement maps, updated every year, delivering valuable information to a wide range of users, such as public or governmental institutions, industry, academia, and citizens. This vast amount of information needs semi-automatic tools and methodologies to derive user-oriented products that can be easily used by land use and urban planning decision-makers, who are often unfamiliar with PSI. This work proposes a semi-automatic procedure to identify damage prone areas in urban environments from wide-area PSI displacement maps. The proposed method identifies the most significant Active Deformation Areas (ADAs) to calculate three products based on the displacement intensity gradient: the Gradient Intensity Map, the Gradient Vectors and Time Series, and the Potential Damage Map. These products allow identifying buildings and urban structures exposed to potential damage, which could be followed by a more detailed building-based vulnerability and risk assessment. The methodology has been applied to an area of the province of Granada (Andalucía, Spain) but it can be applied to any other urban environment where PSI displacement maps are available. To demonstrate the advantages and limitations of the proposed method, results are discussed in five coastal resorts (Cerro Gordo, Punta de la Mona, Marina del Este, Alfa Mar, and Monte de los Almendros), strongly affected by slope movements. The methodology allowed to derive 175 ADAs from about 200,000 measurement points. About 15% of the resulting area has been found to correspond to high or very high gradient intensity class, and 192 out of 633 buildings have been identified to be prone to moderate or high potential damage. A damage prediction test has been realized through Receiver Operating Characteristic (ROC) analysis, based on a damage inventory map derived from field surveys. The results demonstrate the effectiveness of the methodology to localize damaged or potentially damaged buildings, substantially reducing the time of analysis. • A step towards the automatic exploitation of satellite interferometric (InSAR) data. • Automatic exploitation of PSI to support a multi-scale geohazard risk management. • A methodology for the automatic exploitation of EGMS continental displacement maps. • Potential Damage Maps based on spatial gradients of velocity and angular distortion. • Regional scale detection of coastal landsides causing damages in Granada Region. [ABSTRACT FROM AUTHOR]

The potential of satellite-based interferometry for landslides activity definition is well known. Many applications have demonstrated that this technique represents a strong supporting tool for landslide risk assessment and monitoring, at both local and regional scale. The ESA' Sentinel-1 (S1) constellation acquires with high revisit-time in a conflict-free operational mode, timely distributing data without costs or restrictions. All these characteristics allow relying upon S1 service for a long-term operational and sustainable use, as a support of both disaster risk reduction and response. For this reason, more and more research projects are based on the use of S1 in geohazards monitoring and early warning. The aim of this work is to present the results achieved in the framework of the European Project (ECHO) U-Geohaz regarding landslides monitoring and early warning supporting tools based on S1. The study area of the project is the Valle d'Aosta region (VDA) that is widely affected by landslide process of different size and typology. Specifically, the Deep-Seated Gravitational Slope Deformations (DSGSDs) are the most representative in terms of area coverage. The study of the state of activity and evolution of these phenomena is very important because DSGSDs affect entire valley flanks and several villages have been built on them or nearby. The use of S1-based interferometry can potentially give a near-real time information on their activity over the whole region supporting decision makers and early warning systems. At the same time, VDA presents challenging characteristics for what concerns the radar response and thus the obtainable results. The main limiting factor is the snow coverage, which is also strongly related to the topography. The topographic relief is highly variable, ranging from 300 m a.s.l. to peaks higher than 4000 m a.s.l. with steep slopes. The regional climate is characterized by wide range of temperatures varying a lot from the mountainous zone to the bottom of the valleys, implying also a strong variation in snow precipitations. This strong variation, in space and time, affects the DInSAR results in terms of coherence and spatial coverage. In this context, a strong effort has been done to develop a processing approach to improve the spatial and temporal sampling, without losing the quality of the results. Moreover, a method that extracts the most significant Active Deformation Areas (ADA) in a semi-automatic way has been adapted and applied. The main results will be exposed. [ABSTRACT FROM AUTHOR]

A relevant change in the use of SAR interferometry for risk management and reduction has been marked by the launch of the S-1 A and S-1 B, in 2014 and 2016 respectively, which ensure a SAR acquisition every 6 days above the entire Earth and make images available few hours after the acquisition without costs and limitations. S-1 represents a reliable and low cost tool for remote monitoring at both local and national-scale, which can potentially be exploited by administrative entities and Civil Protection authorities involved in risk management activities. "U-Geohaz, Geohazard impact assessment for urban areas" is a two-year project, started the 1st of January 2018, co-funded by the European Commission, Directorate-General Humanitarian Aid and Civil Protection (ECHO). The main aim of the project is to develop a methodology based on the SAR images acquired by Sentinel-1 (S-1) constellation to assess continuously the potential impact of geohazards on urban areas and critical infrastructures. Starting from the experience and the results obtained in the previous ECHO project SAFETY (2016-2017), the aim is to make a step forward, from periodically updated maps to a near-real time geohazards mapping and monitoring. U-Geohaz will provide tools to exploit the 6-days repeatability of S1 to support early warning systems for landslide and volcanic geohazards and to evaluate the expected damage. The consortium of U-Geohaz is composed of 18 partners, from 11 European countries, including 12 Geological Surveys and 3 Civil Protection Authorities that will support the implementation of tools to be operationally useful in risk management. The use of all the developed products will be implemented in the activities of the Civil Protection Authorities involved in the project. All the implemented procedure and tools are tested and will be demonstrated on the real test scenarios of Canary Island (Gran Canaria, Tenerife and El Hierro islands, Spain) and Valle d'Aosta (Italy). The main results achieved over the two test-sites and the future steps of the project will be presented and discussed. [ABSTRACT FROM AUTHOR]