Search

Lightning is the main cause of transmission line failure, and it is important to improve the lightning protection level of the transmission line for the stability of the power system. Traditional solutions for the shielding failure of transmission lines is to use the electrical geometric model method. However, with the improvement of the voltage level, the physical size increases, and the calculation of lightning protection for ultrahigh-voltage dc lines has a greater difference with operating experience. Based on the Ningxia-Shandong dc transmission lines in China, this study utilised the lead development model to describe the flashover of insulators and the breakdown of the gaps. A comprehensive calculation method of shielding failure trip-out rate considering terrain, earth resistance and weather was proposed. The accuracy was much higher when compared with the traditional calculation and the result can be a reference for other similar calculation for dc lines. [ABSTRACT FROM AUTHOR]

In order to solve the operation problems of traditional lightning protection equipment (for example, line arrester and parallel gap) for 220 kV AC transmission line, a novel lightning protection equipment – lightning flashover limited equipment for 220 kV AC transmission line – has been developed successfully, which owns the advantages of line arrester and parallel gap. Technical parameters, and electrical and mechanical performances are researched through theoretical calculation and experimental verification, and an installation structure of new split type is designed. The results show that the lightning flashover limited equipment has good electrical and mechanical performance and meets insulation, tensile, and bending requirements. By now, more than 200 sets of lightning flashover limited equipment for 220 kV AC transmission line have been applied on lines in four provinces of China. About 2 years of operating experience show that all the sets of lightning flashover limited equipment work safely and reliably. [ABSTRACT FROM AUTHOR]

In order to improve the lightning withstand level of ±660 kV DC transmission line in China, the authors had begun to develop the ±660 kV DC line arrester since 2014, which was developed successfully in 2016. The structure, technical parameters, protection performance, and installation of line arrester are analysed in detail. The arrester adopts the structure of polymer housing with an external series air gap and a four-section body. The technical parameters and protection performance are designed and calculated according to the relevant standards. The results show that the arrester has good electrical and mechanical performances, and it meets the requirement of insulation coordination. Pillar insulator supporting installation is used in the arrester application. Up to now, the ±660 kV DC line arrester has been used in the ±660 kV DC transmission line in China, which works safely and reliably over a long time. The successful operation can accumulate operating experience and provide a basis for the large-scale application of the line arrester on the ±660 kV DC transmission line in the future. [ABSTRACT FROM AUTHOR]

This article proposes the deconvolution method to evaluate the lightning channel-base current from the lightning magnetic field. We have verified the method using the magnetic field with/;without noises. The deconvolution results are both in good agreement with the simulated current. Also, we have discussed the deconvolution results when the condition number of the deconvolution matrix, $U_{{0}}$ , is different, and found that the deconvolution results will oscillate if the condition number of $U_{{0}}$ is very large. Note that the deconvolution method presented in this paper also works when using other engineering current models, such as transmission line (TL) model, and the modified TL model with exponential current decaying with height model, and so on. The deconvolution method is an efficient method to evaluate the lightning channel-base current from the electromagnetic field. This approach is also useful in research related to lightning characteristics and lightning protection. [ABSTRACT FROM PUBLISHER]

In order to solve the frequently occurring lightning flashover problems on ±500 kV dc transmission lines in China, the authors have conducted the research on the dc line arrester since 2011. In this paper, the structure and installation, technical parameters, and protection performances, as well as their deterministic processes of the arrester are presented and analyzed in detail. In 2013, the authors successfully developed the arrester products, and the type tests show that they have excellent performance parameters and can act effectively against the lightning impulse and cutoff the dc follow current. By now more than 500 dc line arresters have been installed and used on seven ±500 kV dc transmission lines in eight provinces of China. About four years of operating experience shows that the arresters work safely and reliably over a long period of time, and have been effectively reducing the lightning flashover rate of the ±500 kV dc lines. [ABSTRACT FROM PUBLISHER]