Search

It has been suggested that liming can improve soil structure and thereby decrease losses of particles and associated nutrients. In this study, two types of structure lime, slaked lime (Ca(OH)2) and a mixed product of calcium carbonate (CaCO3) and slaked lime (Ca(OH)2), were applied at three different rates in field trials on clayey soils (23%–40% clay). A combination of primary tillage and structure liming was also studied, in a split-plot trial on a clayey soil (25% clay). Aggregate (2–5 mm) stability, measured as reduction in turbidity (which is strongly correlated with losses of particulate phosphorus), was significantly increased with the highest application rates of both structure lime products. Aggregate size distribution was also improved with structure lime, creating a finer tilth in the seedbed. Yield response to structure lime was not consistent, with both negative and positive responses over the four-year study period. Positive yield responses can possibly be attributed to the finer tilth preventing evaporation in two dry growing seasons. Negative yield responses were probably an effect of impaired phosphorus availability associated with limited precipitation in May-July in 2011 and 2013. Two years after liming, soil pH levels were significantly elevated in plots with the highest application rate of structure lime, whereas no significant increases were found three years after liming. However, a lingering effect of liming was still detectable, as manganese concentration in barley grain was significantly lower in plots with the highest application rates of both structure lime products in the fourth study year. These results indicate that structure liming can be used as a measure to mitigate phosphorus losses from clayey soils, thereby preventing eutrophication of nearby waters. However, the yield response was varying and unpredictable and thus further investigations are needed to determine the circumstances in which field liming can act efficiently not only to prevent phosphorus losses, but also to ensure consistent yield increases. [ABSTRACT FROM AUTHOR]

Liming with 'structure lime', comprising approximately 80–85% ground limestone and 15–20% slaked lime, has been promoted in subsidised environmental schemes in Sweden since 2010 to increase clay aggregate stability and mitigate particulate phosphorus losses to surface waters. To date, approximately 65,000 ha have been structure-limed. Apart from stabilising aggregates, liming may also improve other physical properties, such as soil strength. This study examined the effect of increasing application rate (0–16 t ha-1) of structure lime on soil strength, approximated by horizontal (draught requirement) and vertical (penetrometer resistance) measurements, in eight field soils (clay content 26–38%) to which structure lime had been applied two, three, four or six years previously. Draught requirement when cultivating with a multipurpose cultivator significantly decreased (by 11%) with the highest application rate of structure lime (16 t ha-1) compared with an unlimed control. This reduced the wheel power requirement by 7.1 kW and diesel consumption by 1.2–1.4 L ha-1, and lowered CO 2 emissions by 3–4 kg ha-1. To clarify the general effect of structure liming, the mean value of all limed treatments was compared with that of the unlimed control. This showed that structure liming in general significantly reduced the draught requirement (by 7%). However, penetrometer resistance measurements revealed no significant effects of structure liming and no relation between draught requirement and penetrometer resistance measurements. Overall, the results indicate that structure liming can reduce fuel consumption, due to easier soil tillage, and thus lower CO 2 emissions. • Cultivator draught requirement was measured in structure limed field trials. • A towing eye with sensors that can measure forces in three directions was used. • Structure liming reduced horizontal draught requirement by 7%. • Reductions corresponded to decreases of 1.2–1.4 L diesel ha-1 and 3–4 kg CO 2 ha-1. • Structure liming did not affect penetrometer resistance in this study. [ABSTRACT FROM AUTHOR]