Search

Vacuum circuit breaker is a kind of power equipment widely used in the power system. It is developing toward the direction of high voltage and high current. How to design the contact to maximize the interrupting capacity of the contact system has been conducted by scholars. In this paper, the magnetic field simulation model of contact system is established, the magnetic field distribution characteristics of vacuum interrupters are studied, and the distribution characteristics of the magnetic field in the half cycle of the cup‐shaped axial magnetic field contact system are simulated and analyzed. On this basis, by changing the contact structure parameters, the effects of the number of slots in the cup, the slot angle, the center hole of the contacts, and the length of the slots on the distribution of the axial magnetic field were obtained. The results show that grooving the contact can reduce the eddy current, but it has a limited effect on reducing residual magnetic field. The increase of slot angle of contact cup can effectively reduce the residual axial magnetic field at the zero current moment and the axial magnetic field intensity at the peak current moment. Based on the above research results, a new embedded axial magnetic contact system with 12 slots embedded magnetic ring and reverse contact cup is designed. The embedded magnetic ring and reverse spiral slot increase the axial magnetic field at the peak current moment and reduce the residual axial magnetic field at the zero current moment. Finally, the characteristics of the magnetic field have been improved significantly compared with the magnetic field of traditional cup‐shaped axial magnetic field contact. © 2020 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Vacuum circuit breakers (VCBs) are widely used in power distribution systems. When the VCB in a switchgear interrupts the short circuit current, the U type loop, which consists of a vacuum interrupter, an external busbar and a conductive rod, generates an external transverse magnetic field (ETMF). This field deflects the vacuum arc and affects the interruption performance of the VCB. In this paper, the real magnetic field data of the arc region are obtained by establishing a simulation model of an electrode system, taking into account the real ETMF and real axial magnetic field (AMF). Furthermore, the three dimensional steady magnetohydrodynamic model of the vacuum arc is established by using real magnetic field data as the boundary condition. The vacuum arc characteristics under the combined effect of AMF and the asymmetric transverse magnetic field (TMF) are studied. The simulation results show that the ETMF considerably changes the Bx of the arc column, which demonstrates asymmetry in the positive and negative directions, whereas By demonstrates a weaker asymmetry. Moreover, the asymmetric TMF deflects the distributions of the vacuum arc plasma and increases the partial heat flux density and axial current density. With the increase in the severity of the short circuit, the TMF asymmetry of the arc region is enhanced and the deflection of the vacuum arc plasma is also enhanced. [ABSTRACT FROM AUTHOR]

When short current is interrupted in three-phase vacuum interrupter in switchgear, the “U”-type loop composed of external busbar, conductive rod, and vacuum interrupter, and its adjacent phases will generate external actual transverse magnetic field (EATMF) in the interrupter. The existence of EATMF will deflect the vacuum arc, which will affect the breaking performance of vacuum switch. In view of this situation, this article establishes two kinds of electrode system simulation models considering and not considering EATMF. The simulation results show that EATMF is not uniformly distributed in the interelectrode region, but is stronger in the contact cup edge area outside the “U”-type loop, weaker in the “U”-type loop, and mainly affects ${B} _{x}$. In different short-circuit cases, EATMF is also different due to the difference of phase distance and short current. In the case of three-phase short circuit, the magnetic field in the interelectrode region of the middle phase is most significantly affected by EATMF. EATMF is closely related to the structure size of vacuum switch. By changing the structure size of vacuum switch (e.g., phase spacing ${d}$ , conductive rod length ${h} _{1}$ , ${h} _{2}$), EATMF can be weakened to some extent. [ABSTRACT FROM AUTHOR]