Search

In cell-free massive multiple-input multiple-output systems, a large number of distributed wireless access points (AP) simultaneously serve a number of user equipments (UEs). This setup has recently been introduced as a promising alternative for the current 5G cellular networks. The setup has the ability to offer a good quality of service, especially for the UEs on the cell edges, be it that there is still a need for low-complexity signal processing algorithms. In this paper, the problem of optimal power allocation combined with uplink receive combining and downlink transmit precoding is tackled by providing efficient distributed MMSE-based algorithms. The necessary fronthaul communications to estimate the combining/precoding vectors and the necessary large-scale channel statistics are reduced to a minimum and rely on in-network summation that can be accomplished whenever the APs can be arranged into a tree-topology. Non-weighted max-sum and max–min are used as utilities for the power allocation, but the algorithms are not limited to these cases. Simulations show that the proposed algorithms outperform heuristic power allocation methods, both in uplink and downlink. [ABSTRACT FROM AUTHOR]

Abstract: Multi-input multi-output (MIMO) systems are often realized with low cost front-end architectures, e.g. the so-called direct conversion (or zero IF) architectures. However, such systems are very sensitive to imperfections in the analog front-end resulting in radio frequency (RF) impairments such as in-phase/quadrature-phase (IQ) imbalance and carrier frequency offset (CFO). These RF impairments can result in a severe performance degradation. In this paper we propose RF impairment compensation techniques for orthogonal frequency division multiplexing (OFDM) based MIMO systems. We consider a digital compensation scheme for joint transmitter/receiver frequency selective IQ imbalance, CFO and channel distortion. We also show that in the case where there is no transmitter IQ imbalance, the receiver IQ imbalance compensation can be de-coupled from the channel equalization resulting in a compensation in two stages. The two-stage scheme results in an overall lower computational requirement. The various compensation schemes are demonstrated to provide a performance close to the ideal case without RF impairments. [Copyright &y& Elsevier]

We propose time-varying FIR equalization techniques for spatial multiplexing-based multiple-input multiple-output (MIMO) transmission over doubly selective channels. The doubly selective channel is approximated using the basis expansionmodel (BEM), and equalized by means of time-varying FIR filters designed according to the BEM. By doing so, the time-varying deconvolution problem is converted into a two-dimensional time-invariant deconvolution problem in the time-invariant coefficients of the channel BEM and the time-invariant coefficients of the equalizer BEM. The timevarying FIR equalizers are derived based on either the matched filtering criterion, or the linear minimum mean-square error (MMSE) or the zero-forcing (ZF) criteria. In addition to the linear equalizers, the decision feedback equalizer (DFE) is proposed. The DFE can be designed according to two different scenarios. In the first scenario, the DFE is based on feeding back previously estimated symbols from one particular antenna at a time. Whereas, in the second scenario, the previously estimated symbols from all transmit antennas are fed back together. The performance of the proposed equalizers in the context of MIMO transmission is analyzed in terms of numerical simulations. [ABSTRACT FROM AUTHOR]

Blind identification is a crucial subtask in signal processing problems such as blind signal separation (BSS) and direction-of-arrival (DOA) estimation. This paper presents a procedure for multiple-input multiple-output instantaneous blind identification based on second-order temporal properties of the signals, such as coloredness and nonstationarity. The procedure consists of two stages. First, based on assumptions on the second-order temporal structure (SOTS) of the source and noise signals, and using subspace techniques, the problem is reformulated in a particular way such that each column of the unknown mixing matrix satisfies a system of multivariate homogeneous polynomial equations. Then, this nonlinear system of equations is solved by means of a so-called homotopy method, which provides a general tool for solving (possibly nonexact) systems of nonlinear equations by smoothly deforming the known solutions of a simple start system into the desired solutions of the target system. Our blind identification procedure allows to estimate the mixing matrix for scenarios with more sources than sensors without resorting to sparsity assumptions, something that is often believed to be impossible when using only second-order statistics. In addition, since our algorithm does not require any assumption on the mixing matrix, also mixing matrices that are rank-deficient or even have identical columns can be identified. Finally, we give examples and performance results for speech source signals. [ABSTRACT FROM AUTHOR]

This paper focuses on multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems with channel order larger than the cyclic prefix (CP) length. Writing the demodulating fast Fourier transform (FFT) as a sliding FFT followed by a downsampling operation, we show in this paper that by swapping the filtering operations of the MIMO channel and the sliding FFT, the data model for the temporally smoothened received signal of each individual tone of the MIMO OFDM system is very similar to the data model for the temporally smoothened received signal of a MIMO single-carrier (SC) system. As a result, to recover the data symbol vectors, the conventional equalization approach for MIMO SC systems can be applied to each individual tone of the MIMO OFDM system. This so-called per-tone equalization (PTEQ) approach for MIMO OFDM systems is an attractive alternative to the recently developed time-domain equalization (TEQ) approach for MIMO OFDM systems. In the second part of this paper, we focus on direct per-tone equalizer design and adapt an existing semi-blind equalizer design method for space-time block coding (STBC) SC systems to the corresponding semi-blind per-tone equalizer design method for STBC OFDM systems. [ABSTRACT FROM AUTHOR]