Search

Paper-based packaging materials are generally assembled using adhesives formulated with oil-based polymers. These adhesives make the recyclability of the materials more complex and may be the source of material contamination by mineral oil. In view of developing an adhesive-free process, the potential of ultrasonic compression was investigated in this study. 100% lignocellulosic papers were assembled using an ultrasonic welder dedicated to thermoplastic polymers. For papers containing lignin, the measured peeling strengths were equivalent to those achieved by hot-melt gluing, provided that the water content of papers was well adjusted. At the interface between bonded papers, the fiber network was dense and rather continuous. SEM examinations, 3D X-ray microtomography images, and temperature measurements suggested that the development of adhesion originated to a large extent from a thermoplastic welding mechanism: wood fiber polymers passed their glass transition temperatures, creeped and formed a matrix that coated fibers. Thus, ultrasonic welding appears as an efficient adhesive-free technique for assembling papers that are used in a broad range of packaging applications. [ABSTRACT FROM AUTHOR]

The applicability of using 2-furfural (2-FAL) and methanol as aging markers for synthetic ester impregnated paper insulation was investigated through laboratory aging experiments at temperatures of 80, 100 and 120 ?C. Methanol in the synthetic ester increased linearly with paper aging until degree of polymerisation (DP) reached 400. During this period concentration of methanol in oil was higher than that of 2-FAL, which proved the concept of using methanol to indicate early paper aging in the synthetic ester. However, the rate of methanol increase against the reduction of DP in the synthetic ester was about three times higher than that seen in mineral oil. This is due to a difference in the partitioning of the marker between oil and paper. Since the synthetic ester is more polar than the mineral oil, it attracted more methanol molecules from the paper, resulting in a higher concentration of methanol in oil for the same reduction of DP. In addition, a reduction in methanol was observed at the later stage of paper aging at 120 ?C. This could be due to either a change in the partitioning between oil and paper, or an esterification reaction which consumes methanol in the system. [ABSTRACT FROM PUBLISHER]

Interest in using vegetable oils as dielectric coolants in power transformers dates back to the early studies on linseed- and castor- based fluids as possible replacements of mineral oil. However, interest in vegetable oils was lost due to their high viscosity and their tendency to oxidize. But, in the early 1990s and due to environmental concerns, the interest in dielectric fluids based on vegetable esters re-emerged. As a result, two vegetable ester? based oils were developed, namely, BIOTEMP, developed by ABB, and FR3?, developed by Cooper Power Systems. [ABSTRACT FROM PUBLISHER]

The combination of a dielectric solid (paper) and a dielectric liquid (mineral, vegetable, or silicone) is the most commonly used insulation system in power transformers because of the favorable dielectric properties of these insulations and the high heat capacity of the oil, which allows for cooling. It is known that temperature is the main parameter in determining the aging of these insulations and, therefore, the lifetime of a power transformer. [ABSTRACT FROM PUBLISHER]

This paper is aimed at the study of aging behavior of cellulosic materials in different dielectric liquids under air and nitrogen atmospheres. Paper for copper conductor and high density transformer board were aged at 130°C up to 1128 h in sealed vessels in presence of mineral oil (MO), natural ester (VO) and synthetic ester (SE). The influence of thermal aging on cellulose and oil characteristics are investigated and compared. It's observed that the paper degradation is associated with the generation of CO2 and CO gases. Whatever the type of oil, this generation is more important with vessel under air atmosphere than that under nitrogen gap indicating a protective effect of nitrogen. In mineral oil, the degree of polymerization (DPv) reaches the end of life criteria at around 200 whereas it remains around 400 with ester oils. This is mainly due to the higher water solubility of esters compared to mineral oil. The measured degree of polymerization in MO is comparable to that calculated through 2-FAL (Furanic compounds) content using Vuarchex equation whereas for esters oil, there is no agreement between the measured and calculated DPv through 2-FAL content. This can constitute a limitation in the use of 2-FAL for the diagnosis of ester-filled transformers. Overall, the insulation cellulose/oil behavior seems better under nitrogen atmosphere. [ABSTRACT FROM PUBLISHER]

Acid catalyzed ageing of oil impregnated kraft paper has been studied experimentally. Five different carboxylic acids (formic, acetic, laevulinic, stearic and naphtenic acid) have been added to mineral oil to arrive at a neutralization value of 0,4 mg KOH/g. Thereafter, kraft paper of two different humidities has been allowed to equilibrate with the oil. The results show that the lower the molecular weight of the carboxylic acids is the more is absorbed by the paper. Furthermore, a clear synergy for the paper ageing rates between moisture and the lower molecular weight acids is found, while for the higher molecular weight acids almost no effects were found. It is concluded that present techniques for measuring acidity of oils do not reflect these detailed conditions. It is suggested to introduce a new measuring technique for neutralization value where water rinsing is used to identify the content of low molecular weight, water soluble acids. [ABSTRACT FROM AUTHOR]

Dielectric response is a non-invasive diagnostic method with a potential to give information about the status of the solid insulation in a power transformer. To investigate what conditions the method can and cannot reveal, frequency domain spectroscopy has been applied to oil-impregnated paper and pressboard with and without moisture and/or acids added, and to paper at various stages of aging. Water and carboxylic acids are important aging indicators. It is found that moisture is clearly detectable. Also low molecular weight carboxylic acids will affect the dielectric response in a way similar to moisture, but high concentrations are needed for a contribution comparable to that of moisture. It is difficult to tell moisture and acids apart from the responses obtained. High molecular weight carboxylic acids make little or no contribution to the dielectric response of the solid insulation in a paper/pressboard — oil system. It was also observed that keeping paper or pressboard at elevated temperatures had a conditioning effect on the response. [ABSTRACT FROM AUTHOR]