Search

Packaging waste makes up more than 10% of the landfilled waste in the United States. While consumers often want to make environmentally friendly product choices, we find that their perceptions of the environmental friendliness of product packaging may systematically deviate from its objective environmental friendliness. Eight studies (N = 4,103) document the perceived environmental friendliness (PEF) bias whereby consumers judge plastic packaging with additional paper to be more environmentally friendly than identical plastic packaging without the paper. The PEF bias is driven by consumers' "paper = good, plastic = bad" beliefs and by proportional reasoning, wherein packaging with a greater paper-to-plastic proportion is judged as more environmentally friendly. We further show that the PEF bias impacts consumers' willingness to pay and product choice. Importantly, this bias can be mitigated by a "minimal packaging sticker" intervention, which increases the environmental friendliness perceptions of plastic-only packaging, rendering plastic-packaged products to be preferable to their plastic-plus-paper-packaged counterparts. This research contributes to the packaging literature in marketing and to research on sustainability while offering practical implications for managers and public policy officials. [ABSTRACT FROM AUTHOR]

Hemp hurd fiber, a low-value waste stream from the hemp industry, has potential downstream applications as an alternative to non-renewable plastics for single-use food service ware and packaging applications. Packaging paper substrates made from chemically pulped hemp hurd, mixed in varying ratios with bleached thermomechanical radiata pine pulp were developed and tested. Handsheets were characterized using several mechanical property tests including tensile strength, tearing resistance, burst strength, short-span compression, ring crush, together with Gurley air resistance, contact angle, and Cobb60 tests. Generally, addition of hemp hurd fibers significantly improved handsheet mechanical properties. Hot-pressing of the handsheets so as to approximate molded fiber thermoforming further enhanced their performance, with pure hemp hurd handsheets having the highest mechanical properties and barrier performance. A prototype was successfully thermoformed from hemp fiber, demonstrating overall feasibility of this fibre source for molded fibre objects. [ABSTRACT FROM AUTHOR]

Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion even when it cooled down, but only if the concentration of nanofibers was high enough. This required concentration (0.6–0.9 wt%) depended on the degree of oxidation of the cellulose nanofibers. Rheological hindrance was essential to prevent the buoyancy of beeswax particles, while the presence of glycerol prevented excessive aggregation. The mixtures had yield stress and showed pseudoplastic behavior at a high enough shear rate, with their apparent viscosity being positively influenced by the surface charge density of the nanofibers. When applied to packaging paper, the nanocellulose-stabilized beeswax suspensions not only enhanced its barrier properties towards liquid water (reaching a contact angle of 96°) and water vapor (<100 g m−2 d−1), but also to grease (Kit rating: 5) and airflow (>1400 Gurley s). While falling short of polyethylene-coated paper, this overall improvement, attained using only one layer of a biobased coating suspension, should be understood as a step towards replacing synthetic waxes and plastic laminates. [ABSTRACT FROM AUTHOR]

Wood-based paper fibers are inherently biodegradable. In contact with moist soil and in compost, papermaking fibers are readily broken down by soil microbes. Resistance to biodegradation is needed, as paper is used for special applications such as mulching in agriculture and forestry, the coating of construction materials, and for packing and wrapping under conditions where packaging materials may be exposed to contact with moist soil or other type microbial active contamination. A preceding study showed that paper chemical crosslinking with glyoxal, citric acid (CA), or methylated 1,3-dimethylol-4,5-dihydroxyethylene urea (mDMDHEU) results in substantially improved paper wet strength and lower paper water absorbency. The present study examined the efficiency of chemical crosslinking treatments with CA and with mDMDHEU to decrease the biodegradation rate of laboratory paper sheets and a sack paper, both made of kraft fibers. The biodegradation was examined using a 48-h enzymatic degradation test and a 2-month soil burial test. The results indicate that chemical crosslinking is an effective non-biocidal method for making sulphate kraft paper more resistant to biodegradation. In some end-uses, improved resistance to biodegradation, along with improved paper wet performance, can enhance paper performance comparable to plastic films. [ABSTRACT FROM AUTHOR]

Paper has gained popularity as a packaging material due to its reduced environmental impact compared with non-degradable alternatives. However, its flammability poses safety risks, prompting research on enhancing its flame retardancy. This work introduces a diffusion-driven self-assembly strategy (DDSAS) to create a functional graphene oxide (GO) coating on various packaging papers. DDSAS involves infiltrating the paper's cellulose microfiber network with branched polyethyleneimine (b-PEI), which binds firmly to cellulose microfibers. Electrostatic interactions between GO and b-PEI then drive GO assembly into a densely stacked, layered structure on the paper surface. This GO structure provides a physical barrier against flames and generates incombustible gases (CO2, H2O, NO2, and NO) when heated, diluting the surrounding oxygen concentration and acting as a heat insulation layer. These factors increase the flame retardancy of treated papers ten-fold. Additionally, the gradual reduction of GO upon heating forms reduced graphene oxide (rGO) on the paper, significantly increasing its electrical conductivity. As a result, the flame-retardant papers not only prevent the fire from spreading but can also act as fire sensors by triggering an alarm signal at the early stages of contact with fire. In summary, this work offers a rational strategy for designing and manufacturing flame-retardant paper packaging materials. [ABSTRACT FROM AUTHOR]

The identification of sustainable materials as an alternative to plastic is fundamental for the protection of the environment and for the safeguard of marine ecosystems. The replacement of plastic with organic materials for fish storage might affect its shelf-life due to the high concentration of oxidizable fatty acids in fish flesh. This study investigated the effectiveness of two organic packaging materials, namely coconut fiber (Coc) and paper (Pap), as alternatives to the conventionally used polystyrene (Pol), on the shelf-life, hygienic parameters, and quality traits of anchovies refrigerated for one (T0), three (T1), or seven (T2) days. The hygienic quality of anchovies packaged in the organic Pap and Coc boxes was better than the traditional Pol, probably due to the higher porosity of the packaging, which allows a higher bacterial proliferation. Results of the T-BARS test showed a lower (p < 0.05) malondialdehyde concentration in fillets from the Pap group, which increased (p < 0.05) from the first to the seventh day of storage. The polyunsaturated fatty acids concentration did not differ between groups, but it decreased (p < 0.05) from T0 to T2. Coconut fiber and paper are worthy of further investigation since these packaging materials did not affect the shelf-life and fatty acid profile of anchovies during storage. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop bio-based adhesives that can be used for various packaging papers. In addition to commercial paper samples, papers produced from harmful plant species in Europe, such as Japanese Knotweed and Canadian Goldenrod, were used. In this research, methods were developed to produce bio-based adhesive solutions in combinations of tannic acid, chitosan, and shellac. The results showed that the viscosity and adhesive strength of the adhesives were best in solutions with added tannic acid and shellac. The tensile strength with adhesives of tannic acid and chitosan was 30% better than with commercial adhesives and 23% for combinations of shellac and chitosan. For paper from Japanese Knotweed and Canadian Goldenrod, the most durable adhesive was pure shellac. Because the surface morphology of the invasive plant papers was more open and had numerous pores compared to the commercial papers, the adhesives penetrated the paper structure and filled the voids. There was less adhesive on the surface and the commercial papers achieved better adhesive properties. As expected, the bio-based adhesives also showed an increase in peel strength and exhibited favorable thermal stability. In summary, these physical properties support the use of bio-based adhesives use in different packaging applications. [ABSTRACT FROM AUTHOR]

Paper is widely used as a packaging material because it is biodegradable and completely safe for the environment. The use of antimicrobials as a coating on paper can improve its mechanical, optical, physical and antimicrobial properties. Antimicrobial packaging suppresses the development of pathogenic microorganisms in order to ensure the safety of the product, extend the shelf life and protect the quality of the product. Giving antibacterial properties to papers and cardboards expands their use in different areas and for different purposes. Antibacterial paper prevents the entry and development of harmful microorganisms such as bacteria, fungi, mould. Antimicrobials that occur naturally in nature have a number of advantages, as they are considered to pose less risk to the consumer. One of the modern directions in research is the inclusion of different types of active substances in the packaging material, which can give it additional functions, such as elimination of oxygen, moisture, ethylene, ethanol emission, antimicrobial activity and others. The present work aims to obtain plant extracts, their characterization and their surface application on paper. Extracts of Bulgarian herbs St. John's wort, cumin, rosemary, thyme and basil were obtained and characterized and studied. Plant extracts are applied by spraying on the surface of various papers. The antimicrobial effect of treated papers on gram-positive and gram-negative bacteria was studied. The results of the analysis of the obtained papers show the possibility of using plant extracts containing biologically active ingredients for the production of papers with barrier properties. The use of plant extracts is a promising and innovative solution. [ABSTRACT FROM AUTHOR]

BACKGROUND: Deinking is an important part of paper recycling that involves the removal of ink particles from the paper fibres. This industrial process is important so that the fibres can be recirculated back into paper production, which enables better sustainability as fewer fresh fibres are needed. In this study, we examined five different alternative fibre materials from different agricultural residues and industrial processes for the pilot production of papers. Papers containing fibres from invasive plants (Japanese knotweed), dedicated crops (miscanthus, acacia), agricultural residues (tomato stems), and industrial waste (jute - fibres from coffee bags) were printed with water-based flexo inks and deinked with two separate processes (chemical and enzymes). Mechanical (break and tensile index, breaking length) and optical properties (ISO whiteness, brightness and CIE L*a*b* values) were measured and ink elimination IR700 and deinking efficiency was calculated for the two deinking processes. RESULTS: Enzymatic treatment improved the mechanical properties of deinked pulp in comparison with the classic chemical treatment. Mechanical strength for almost all papers increased slightly (breaking length up to 20% in tomato and jute), and the optical result (brightness) increased similarly for both processes due to the bleaching action of the colour-shaded samples, whereas the deinking efficiency showed mixed results between chemical- and enzyme-type deinking (with chemical achieving better elimination measured at 700 nm) in the typical range of ink elimination values (15-35%) for flexographic inks. This indicates further optimization of the deinking with enzymes is needed due to different alternative fibre compositions and variations of residues in the delignification processes. CONCLUSION: Using a combination of adjusted enzymatic treatment as a precursor for deinking of paper-based packaging materials sourced from alternative fibres showed promising results regarding mechanical properties, whereas the optical properties need to be improved with cellulase optimization or by using mixes of different enzymes. These kinds of paper materials printed with flexo inks were found to be successfully deinkable with the chemical ISO-based deinking protocol. [ABSTRACT FROM AUTHOR]

Transport of volatile organic compounds (VOCs) through porous media with active surfaces takes place in many important applications, such as in cellulose-based materials for packaging. Generally, it is a complex process that combines diffusion with sorption at any time. To date, the data needed to use and validate the mathematical models proposed in literature to describe the mentioned processes are scarce and have not been systematically compiled. As an extension of the model of Ramarao et al. (Dry Technol 21(10):2007–2056, 2003) for the water vapor transport through paper, we propose to describe the transport of VOCs by a nonlinear Fisher–Kolmogorov–Petrovsky–Piskunov equation coupled to a partial differential equation (PDE) for the sorption process. The proposed PDE system contains specific material parameters such as diffusion coefficients and adsorption rates as multiplication factors. Although these parameters are essential for solving the PDEs at a given time scale, not all of the required parameters can be directly deduced from experiments, particularly diffusion coefficients and sorption constants. Therefore, we propose to use experimental concentration data, obtained for the migration of dimethyl sulfoxide (DMSO) through a stack of paper sheets, to infer the sorption constant. These concentrations are considered as the outcome of a model prediction and are inserted into an inverse boundary problem. We employ Physics-Informed Neural Networks (PINNs) to find the underlying sorption constant of DMSO on paper from this inverse problem. We illustrate how to practically combine PINN-based calculations with experimental data to obtain trustworthy transport-related material parameters. Finally we verify the obtained parameter by solving the forward migration problem via PINNs and finite element methods on the relevant time scale and show the satisfactory correspondence between the simulation and experimental results. Article Highlights: A mathematical model to describe transport of polar volatile organics through paper is proposed. Based on experimental data, the deep learning method of physics-informed neural networks (PINNs) is used to solve the inverse problem of finding the sorption time constant. Solutions for the forward problem are obtained by the standard finite element method (FEM) and PINN methods. These solutions are compared with each other as well as with the experimental data to verify the model. [ABSTRACT FROM AUTHOR]

Featured Application: An improvement in adhesion (gluing) in the printing production process. In this study, the effect of air plasma on the surface properties of printed and coated cardboard was investigated. The material was activated by low-pressure cold plasma for 1, 10, 20, and 30 s. Wettability changes on the surface were examined by contact angle measurements using the sessile droplet technique. The differences in the surface free energy were calculated using the Lifshitz–van der Waals/acid–base and Contact Angle Hysteresis approaches. Optical profilometry was used for the surface roughness evaluation and an X-ray photoelectron spectroscopy analysis was performed to find changes in surface chemistry. Adhesive strength tests were carried out to estimate the adhesion changes after the material's modification. It was found that the water and formamide contact angles increased after the plasma treatment while the diiodomethane contact angle did not change. As a result of the modification, the surface free energy also increased significantly and the surface roughness increased. The pull-off tests confirmed the improvement in the material's surface properties. Moreover, it was demonstrated that the optimal effect can be obtained after just 10 s of the plasma process. [ABSTRACT FROM AUTHOR]

Recently, fiber-based and functional paper food packaging has garnered significant attention for its versatility, excellent performance, and potential to provide sustainable solutions to the food packaging industry. Fiber-based food packaging is characterized by its large surface area, adjustable porosity and customizability, while functional paper-based food packaging typically exhibits good mechanical strength and barrier properties. This review summarizes the latest research progress on food packaging based on fibers and functional paper. Firstly, the raw materials used for preparing fiber and functional paper, along with their physical and chemical properties and roles in food packaging, were discussed. Subsequently, the latest advancements in the application of fiber and paper materials in food packaging were introduced. This paper also discusses future research directions and potential areas for improvement in fiber and functional paper food packaging to further enhance their effectiveness in ensuring food safety, quality, and sustainability. • Properties of materials for fiber and functional paper were introduced. • The roles of materials in food packaging were discussed. • The application of fiber and paper materials in food packaging were introduced. • Limitations and future development directions were discussed. [ABSTRACT FROM AUTHOR]

A lignin-based PU coating was prepared for paper-based green packaging. Two representative diisocyanate were used to prepare the coatings. Due to the rigid aromatic, the physical properties of the TDI system reached the maximum below the lignin content of 40%. The HDI that contains flexible aliphatic chains alleviated the brittleness of coating, and it showed physical advantages when the lignin content was more than 50%. Owing to the high lignin content, the coating presented enhanced thermal stability. After coated with the lignin-based PU coatings, the dry tensile strength of coated paper was improved by 126%. Amazingly, the wet strength was increased from 0.31 to 12.6 MPa with an improvement nearly 40 times. Based on the coordination of lignin, Ag+ was introduced into the PU matrix, which imparted the coating with excellent antibacterial ability. The colony forming units of E. coli and S. aureus were both less than 1. However, no inhibition halo was observed, which indicated that the Ag was firmly anchored on the coating and the antibacterial ability is only available when the bacterial contact the coating surface. The lignin-based PU coating with favorable sustainability and properties shows great potential in paper-based green packaging fields. The prepared PU coating with high lignin content and firmly anchored Ag+ exhibits outstanding physical properties, thermal stability, and antibacterial property, which makes it an ideal candidate to be used in paper-based green packaging. [Display omitted] [ABSTRACT FROM AUTHOR]

Flexible packaging materials consisting of several layers of very dissimilar materials are currently considered for replacement by multilayer polyolefin films as well as functional flexible paper materials to improve recyclability. Such materials however lead to new challenges in processing on existing packaging machinery. This paper focuses on the sealing process of such materials, especially looking at pillow pouches and the challenges occurring at the junction between cross and fin seals where the total thickness jumps from two to four layers. It is shown that the application of conventional machinery and sealing tools does not lead to a gastight seal within the operational sealing window of such materials. The origin of the permanent failure is the lack of material fraction capable to flow as a viscous melt into the gap at the fin seal. The limited compressibility of the nonmelting materials and their bending stiffness tend to increase the gap. In case of paper, a flexible sealing jaw, equipped with an elastic insert, enables a focused application of pressure at the layer jump of a poorly compressible material. This results in clearly improved gas tightness of all selected materials in the range of the used test methods (leak size 10 μm). The leakage rate of papers was reduced from 3–4 mbar·l/s with rigid tools to 1 mbar·l/s with flexible tools. The leakage of 2 mbar·l/s with OPP/CPP material could be prevented and no leaks were detected. With OPP/PE, leak‐proof results were obtain within reduced temperature at 140°, which is near the level of acceptable seal quality with low shrinkage effect. [ABSTRACT FROM AUTHOR]

Cellulosic fibres have been obtained by green procedures from the cladodes of Opuntia ficus indica (L.) Mill., constituting a large agro industrial waste in our territory. The materials have been analysed for its relative composition, applying, IR and TG methodologies and it was characterised by the absence of lignin. The fibrous material allowed the manufacture of a handmade paper obtaining an ecological material suitable for packaging purposes. The authors evidenced that the simple protocol based on hot water treatment was able to decrease the amount of hemicellulose in the final material. [ABSTRACT FROM AUTHOR]

In the packaging sector of the printing industry, different coating applications are tried and investigated in order to increase the surface appearance and performance characteristics of paper and cardboard. The printability, water and ink absorption capacity, frictional resistance, light sensitivity of the visual graphical design that are going to be printed on the packaging papers are some of them. In this study, different types of cardboards that are used as a packaging material were chosen and coated with nanocrystalline cellulose (NCC)/PVA at different rates (%). In order to determine effective and economical usage conditions, the coating solutions, at three different concentrations as 3 wt.%, 5 wt. %, 7 wt.%, were prepared. The coating was applied on the test papers, which were at the same weights (350 g/m2) and had different surface properties as matte glossy, bright glossy, American Bristol. NCC/PVA existence on the coated paper surface was confirmed with Fourier Transform Infrared Spectroscopy (ATR-FTIR). The impact of the coating, which was prepared at different concentrations, on the packaging materials was studied with respect to thickness, stiffness, water absorbability, contact angle and surface tension. [ABSTRACT FROM AUTHOR]

Lining of canvases and paper artworks is a diffused conservation methodology developed to ensure the safe and long-term preservation of weakened supports. Lining systems are generally constituted by a new supporting material or a package of new materials glued to the original artefact. This paper reports on the study of the mechanical behaviour of four multi-layered paper and canvas composites, proposed as lining systems for a large drawing on paper: the "School of Athens" by Raffaello Sanzio, dated 1508. This masterpiece is the 1:1 preparatory cartoon for the wall-painting in the Vatican rooms. Uniaxial tensile testing has been employed in this study to characterize both the single layer materials and the overall mechanical behaviour of the composites. The mechanical tests have been performed before and after artificial ageing with high humidity regime. The complex testing protocol allowed selecting the best performing composite for the final lining, and to assess a safety threshold in terms of stress value for the framing and display of the restored artwork in the new showcase. The results constitute a quantitative evaluation of the different systems, and therefore they can effectively support the conservators' activity and methodological choices. [ABSTRACT FROM AUTHOR]

Introduction. The aim of research -- to determine the effect of clary sage (Salvia sclarea L.) essential oil on paper packaging materials. Materials and methods. Three packaging materials have been studied based on paper coated with clary sage essential oil. The chemical composition of the clary sage essential oil is determined chromatographically. Antimicrobial effect of essential oil was determined against Gram-positive, Gram-negative bacteria, yeasts, and fungi using the agar diffusion method. Results and discussion. The chemical composition of the clary sage essential oil showed a predominant amount of oxygenated monoterpenes (83.43%), followed by monoterpene hydrocarbons (7.86%), and sesquiterpene hydrocarbons (5.16%). The major components of the clary sage essential oil were linalyl acetate, β-linalool, α- terpineol, limonene, and geranyl acetate that determined the antimicrobial action of the oil. The essential oil exhibited a fungicidal action against the tested molds and yeasts. Its high antimicrobial properties could be probably due to the high content of linalyl acetate (40.31%) and β-linalool (22.72%). Our results showed high fungicidal efficacy for the three types of packaging materials. The suppressive action against C. albicans during the investigated shelf life period was about 100%. It was found a high efficiency of the recycled paper against A. brasiliensis (99.2% - 81.9%). It was determined that the bactericidal effect of the tested packaging materials was lower than the Gram-negative bacterium S. abony. Conclusions. Clary sage essential oil could be used as an antimicrobial agent in the food industry due to its antimicrobial properties, in order to improve the quality of the products and extend their shelf life. [ABSTRACT FROM AUTHOR]

A sustainable development requires the use of bio-based packaging materials because of ready availability and limited environment impact. The porous structure and hydrophilic nature of cellulose in paper based materials needs to be combined or laminated with other materials to overcome these limitations. The fiber found in the banana stems and leaves, it is possible to use these raw materials in pulp processing and banana flour can be produced into an edible film. The aim of the study was to discover a suitable method (wet lamination or dry lamination) for producing paper (stems, leaves, or a 1:1 ratio of mixed stems and leaves) lamination with banana film and to study their physical properties for packaging application. Banana flour (4%) solution was used as adhesive media between paper and film for wet lamination process where as the heating and compression were applied for dry lamination process. The results showed the efficiency of banana stems for paper production. However, there was an improvement in results when a 1:1 ratio of mixed stems and leaves was used due to an increase in tensile strength, elongation, and the L value. There was no significance in the water vapor permeability in all treatments. All treatments of paper lamination expressed 6 - 13% moisture content. The separation of film and paper layers occurred in dry lamination samples. The wet lamination of the leaf paper and mixed paper caused high tensile strength and elongation. Therefore, it could be used as an alternative and environmentally friendly method in the application of packaging materials. [ABSTRACT FROM AUTHOR]

Newly developed packaging paper made of biopulped pineapple leaf fiber (PALF) and poly(lactic acid)(PLA) was studied. PALF packaging sheets were solvent impregnated with PLA at different concentrations in order to improve their moisture barrier and mechanical performance. With the impregnation of PLA at a concentration of 4%, the packaging material exhibited a low moisture uptake and a high tear index. An electron micrograph of the sample at 4% impregnation revealed uniform and packed PLA reversed microsphere morphology. These results suggest that surface coating via biodegradable polymers, such as PLA, may be utilized for manufacturing packaging materials in industrial applications. This new packaging material could reduce the dependency on wood-based paper and plastic-based packaging.

Nowadays, the dependence on synthetic plastic-based materials for the preservation and transport of different types of products is very high, leading to major environmental and human health concerns, which highlights the importance of investigating sustainable options. Paper is a widely used bio-based material for packaging however, the development of newer and straightforward approaches to produce paper-based materials with increased functionalities and performance is still highly desired. In this work, we report the use of a bio-based photopolymerizable coating formulation, composed of tung oil, and using Darocur 1173 as photoinitiator, to develop functional papers with hydrophobic and improved water barrier properties, without compromising other properties. Coated paper samples were prepared, using different irradiation times (0, 15, 30, 60, and 300 s), to study the effect of this parameter on the properties of the coated papers. The ensuing coated papers presented pick-up values between 6 and 7 g/m2. Their hydrophobicity was significantly improved as evidenced by the increase in the contact angle values from about 71° to 127° and the significant decrease in the water absorption, measured by the Cobb test, from 108 down to 17 g/m2, upon a curing time of only 15 s. Furthermore, with this time of curing, the optical (viz. whiteness, brightness, and opacity) and mechanical properties (viz. tensile and burst strength) of paper were not affected. These results highlight the great potential of tung oil photopolymerizable coating formulations as a simple and promising alternative for the fabrication of more sustainable and functional paper packaging materials. [Display omitted] • Photopolymerizable bio-based coating for paper-based packaging materials • The obtained coatings confer high hydrophobicity to paper. • Papers with improved air barrier and mechanical properties were obtained. • Optimized curing time (15 s) compatible with manufacturing constraints [ABSTRACT FROM AUTHOR]

Migration of formaldehyde to aqueous extracts from paper and cardboard food packaging materials was determined by an ultraviolet visible-spectrophotometric method at 410 nm. Intraday and interday precision of the method, expressed as coefficient of variation, varied between 1.5 to 4.4% and 7 to 8.8%, respectively. The limit of quantification was 0.28 mg kg−1for formaldehyde in aqueous extracts. The recovery of the method was over 90% for two different concentration levels in aqueous extracts. The method was applied to the migration of formaldehyde to aqueous extracts from 31 different paper and cardboard materials collected from the packaging sector, intended for food contact, such as tea filters, hot water filters, paper pouches and folding boxes. The results were between limit of detection 0.23 mg/kg and 40 mg kg−1and were evaluated according to the relevant directives. [ABSTRACT FROM AUTHOR]

Newly developed packaging paper made of biopulped pineapple leaf fiber (PALF) and poly(lactic acid)(PLA) was studied. PALF packaging sheets were solvent impregnated with PLA at different concentrations in order to improve their moisture barrier and mechanical performance. With the impregnation of PLA at a concentration of 4%, the packaging material exhibited a low moisture uptake and a high tear index. An electron micrograph of the sample at 4% impregnation revealed uniform and packed PLA reversed microsphere morphology. These results suggest that surface coating via biodegradable polymers, such as PLA, may be utilized for manufacturing packaging materials in industrial applications. This new packaging material could reduce the dependency on woodbased paper and plastic-based packaging. [ABSTRACT FROM AUTHOR]

Copyright of Fibres & Textiles in Eastern Europe is the property of Sciendo and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Highlights: [•] Paper/caseinate and paper/caseinate/chitosan films were developed. [•] Chitosan layer on dry caseinate-coated paper provided the best functional properties. [•] Chitosan significantly increased the elongation at break of coated paper. [•] Caseinate/chitosan bilayer systems seemed to be appropriate paper coating materials. [ABSTRACT FROM AUTHOR]

Efficient end-of-life solutions play an important role in developing sustainable packaging because they contribute to reducing resource wastage and environmental impact, whilst providing economic and social benefits. This paper briefly reviews current end-of-life solutions for fibre and bio-based materials for packaging in Europe. It also addresses current research in the field, as well as standardization, legislation and socio-economic aspects related to renewable packaging in Europe. This review focuses on the following groups of packaging materials: paper and board and bioplastics. With this hierarchy, recycling, organic recovery and energy recovery are analysed with regard to the processes and technologies that offer the most sustainable end-of-life options. Copyright © 2012 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

The role of plastics and paper as food packaging materials is reviewed with a brief outlook on the historical background of food packages in general. The inherent properties of these food packages that should be considered by food processors are also discussed. The current efforts in meeting the needs of consumers in ensuring food's quality with prolonged shelf life during storage and distribution were highlighted. This review article also reflects on the emerging trends in technology that address innovations on Modified atmosphere packaging (MAP), Active packaging (AP), Intelligent packaging (IP) and the use of anti-microbial agents to extend the shelf life of foods under storage and distribution conditions. The future of these packaging materials in the food industries and their impacts on the environment and the society at large will continue to receive attention. [ABSTRACT FROM AUTHOR]

The study aims to establish if the packages based on paper or LDPE modified with extract of thyme and garlic are efficient in preserving the summer salame during storage, as compared with the unmodified packages. Eight different types of packages based on paper or LDPE impregnated in the aqueous extracts of thyme and garlic were prepared and used to test their preservation activity during the storage of the summer salame, a Romanian meat product, at room temperature and light. The eight types of packages are as follows: product impregnated in extract of thyme (IP thyme) and garlic (IP garlic), summer salame packaged in unmodified paper (H) and LDPE (LDPE), summer salame packaged in paper impregnated in extract of thyme (IH thyme) and in extract of garlic (IH garlic), summer salame packaged in LDPE impregnated in extract of thyme (ILDPE thyme) and in extract of garlic (ILDPE garlic). At 0, 3 and 6 days, the following physico-chemical parameters were monitored during storage: acidity, pH, water, salt and protein content. Additionally, the changes of the organoleptic characteristics were established. It was observed that the most reduced decrease of the acidity and protein content during storage occured in the summer salame impregnated in the thyme extract and in the salame packaged in the paper impregnated in the garlic extract. Moreover, the organoleptic characteristics of the samples impregnated in the thyme and garlic extract, excepting those in packages based on LDPE were not significantly changed during storage, at room temperature and under light. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel dimer acid-based waterborne polyurethanes (DWPUs) were designed and prepared. • DWPUs were first used as multifunctional coatings for paper substrates. • Papers coated by DWPUs exhibited excellent water- and oil-resistances. • Alkyl and uniform membrane of DWPUs are critical to improve papers' properties. Paper derived from lignocellulose has great advantages over plastics as packaging material, nevertheless, the poor water- and oil-resistances of paper-derived products limited their application in high-end field. Herein, novel dimer acid-based waterborne polyurethanes (DWPUs) with different content of dimer acid-based polyester polyol (DG) were prepared and used as water- and oil-resistant coating for paper substrate. The effects of DG contents on water- and oil-resistances, mechanical properties and thermal stability of DWPUs coated papers were systematically investigated. When the content of DG reached up to 7 wt% (based on polyester glycol), the paper coated by DWPU exhibited 88.06% decrease in Cobb 60 value, 8.7 times increase in kit rating compared with uncoated paper. Meanwhile, DWPUs coated papers showed good mechanical properties and thermal stability. These improvements are attributed to the flexible long-alkyl chain, and six-ring structure of DWPUs as well as the continuous and homogeneous DWPU-derived membrane on the surface of paper. This study provides a new framework for the preparation of high quality, multifunctional, environmentally friendly water- and oil-resistant coatings for paper substrates. [ABSTRACT FROM AUTHOR]

Paper-based packaging generally has poor performances in the gas/oil barriers. This work reports a paper-based packaging material prepared via the modification of conventional papers with TEMPO-oxidized cellulose nanofibers (TOCN)/cationic guar gum (CGG) hydrogel film. Specifically, the hydrogel film modification was realized through a layer-by-layer deposition on paper. The hydrogel film modification significantly improved the mechanical and barrier properties of the paper. Specifically, the 4-layer hydrogel film modified paper showed a tensile strength of 34.03 MPa and a burst strength of 510 kPa, respectively. In contrast, the unmodified paper exhibited a tensile strength of 26.78 MPa and a bursting strength of 388 kPa. The packaging performance of this TOCN/CGG hydrogel film modified paper was demonstrated via the fresh mooncake packaging test. Such hydrogel film not only provided the oil resistance, but also maintained the mooncake's freshness. This material can serve as a green and sustainable food packaging. [Display omitted] • A TOCN/CGG self-assembled hydrogel film modified paper reported • A 27% increase in tensile strength with the 4-layer hydrogel film modification • A kit number of 11 with the 4-layer hydrogel film modification • Freshness retention of mooncakes observed as packaged with modified paper [ABSTRACT FROM AUTHOR]

Goal, Scope and Background. This paper gives an overview on how the wood and packaging material production is inventoried in ecoinvent. Packaging materials have been a very important topic in the area of Life Cycle Assessment for more than twenty years. Wood is the most important renewable material and regenerative fuel used worldwide, and an important raw material for paper I board. Several methodological problems arising when inventorying wood for material and energetic uses in a generic database are discussed in more detail. Within the ecoinvent project, the Swiss data base for life cycle inventory data, two reports are dedicated to these two important topics - report No. 9 for wood and report No. 11 for packaging materials. Methods. The whole wood chain has been modeled in a consistent way. This allows one to use this data for LCAs of building materials, bioenergy or paper production. The data represent average technologies used in Central Europe in the year 2000. A revenue-based co-product allocation approach is used for the different outputs. Correction factors are introduced for the consistent modeling of mass-based, material inherent wood properties such as solar energy, carbon uptake and land use. For packaging materials, the data sets represent European average data for the most often used materials as well as specific datasets for the production of actual packaging boxes and containers. Results and Discussion. For wood, revenue-based allocation and the use of the correction factors for mass-related wood properties are shown and explained. For packaging materials, the importance of the raw material wood to the total load is shown. Furthermore trends in the data inventories for board packaging materials over the last two decades are discussed: mainly due to the increased comprehensiveness of the data, higher cumulative emissions can be observed. Conclusion. For wood, the database ecoinvent provides consistent data sets for the entire chain from forestry to intermediate products such as timber, different types of wood based boards, chips, pellets, etc. For packaging materials, the number of data sets of basic materials has been extended. A modular concept for actual packaging container data sets allows the user an easy modeling of various types of packaging containerslboxes. In the area of paper and board, a comprehensive database for the production of various types of pulp, paper and board is provided, which is representative for the average European production situation. Outlook. Since wood is only limited and representative data for Europe is therefore not included, an update in the near future would be reasonable. Possible further extensions in the future could include various, final wooden products. For the data on paper/board, different levels of quality are observed, requiring a selective up-date of these data. Future extensions could include data sets for the import of pulp from overseas - especially from South America and Canada. [ABSTRACT FROM AUTHOR]

• Multidisciplinary evaluation of three novel perennial crops as feedstock for the pulp and paper industry. • Meadow hay blends generated higher tensile indices compared to the pure birch control. • Fibre lengths of 0.5 (meadow hay), 1.3 (Virginia mallow), and 0.9 mm (cup plant) were measured. • The fibre widths of cup plant and Virginia mallow are broader compared to hardwoods. • These promising raw materials will be valueable in cardboard production for sustainable packaging. While the demand for paper and packaging material is increasing, industry and consumers are searching for more sustainable raw materials. This study evaluates three non-wood perennials to find alternative raw materials for the paper and pulp industry. Meadow hay, cup plant (Silphium perfoliatum L.) and Virginia mallow (Sida hermaphrodita (L.) Rusby) are attracting attention as potential raw materials for the bioeconomy due to biodiversity benefits, low fertilizer requirements as well as high yields. For the first time a detailed view on their fibre morphology and use as paper feedstock is given. After three different mechanical grinding methods, the plant material was screened, pulped in NaOH and beaten in a PFI mill. Birch fibre has been chosen as short-fibre control and blend base. Hand-sheets with different pulp blends of birch and one of the three raw materials were made, and paper properties were measured. For meadow hay, Virginia mallow and cup plant fibre lengths of 0.5, 1.3, and 0.9 mm were measured. Therefore, all perennial plant materials have comparable fibre lengths to hardwoods. Meadow hay blends with birch pulp percentages of 50 % and 75 % generated higher paper strength compared to the pure birch paper at a beating intensity of 5000 revolutions (PFI). The paper strength of cup plant and Virginia mallow blends is comparable to the strength of the birch control. Due to these promising results, all analyzed raw materials could find their application, especially in the growing area of sustainable packaging materials. [ABSTRACT FROM AUTHOR]

The use of paper as a sustainable packaging material is favored, but it lacks sufficient barrier properties in terms of water repellence and oil resistance. Novel approaches consider active packaging materials or coatings with controlled release providing additional functionality for delivery of specific components to the surface. In this study, the development of a waterborne coating with organic nanoparticles and encapsulated sunflower oils is presented as a system for thermal release of the oil and on-demand tuning of the final barrier properties of the paper substrate. After synthesis of the nanoparticles, it seems that the encapsulation of various grades of sunflower oil (i.e., either poly-unsaturated or mono-unsaturated) strongly affects the encapsulation efficiency and thermal release profiles. The water contact angles are controlled by the oil release and chemical surface composition of the coating upon thermal heating. The oil resistance of the paper improves as a more continuous oil film is formed during thermal release. In particular, the chemical surface composition of the paper coatings is detailed by means of micro-Raman spectroscopy and surface imaging, which provide an analytical quantification tool to evaluate surface coverage, oil delivery, and variations in organic coating moieties. [ABSTRACT FROM AUTHOR]

• Cellulose-based solutions can improve environmental performance of food packaging. • Food products require specific barrier functions from cellulose-based packaging. • Eco-design enables quantifying environmental performance and identifying trade-offs. • Fulfilling the barrier requirements for food product packaging is crucial. This short communication describes the climate change impacts of using cellulose, and more precisely cellulosic fiber-based materials, in food packaging, representing current and emerging industrial state of the art technology, without specific reference to current scientific advances. First, the different types of cellulosic fiber-based packaging materials, which can be used to replace fossil-based packaging materials, are presented for flexible and rigid applications. The focus is on technological solutions with packaging properties that enable the protection of commonly sold food products. The manufacturing processes associated with these cellulosic fiber-based materials is described and the environmental impact assessment of 4 selected case studies presented: stand-up pouches, flexible flow wraps, frozen or chilled food trays, and molded pulp lids. A simplified eco-design Life Cycle Assessment (LCA) was then performed to compare each solution with its fossil-based counterpart. Differences and similarities between the various cellulosic solutions have been identified. Furthermore, the assessment confirms that cellulosic fiber-based materials have reduced environmental impacts as compared to fossil-based counterparts, if a similar packaging weight is obtained. Indeed, all impacts of plastics are between 3 and 5 kg CO 2 eq/kg, while all impacts of cellulosic fiber-based materials are below 1.5 kg CO 2 eq/kg. [ABSTRACT FROM AUTHOR]

Summary: The cellulose paper-based functional materials modified by Zn-NDI and Cu-NDI were prepared by the coating method. The chemical structures were characterized by FTIR, XRD, UV-vis and SEM, and the photochromic properties of the composite functional materials wer e studied. The results showed that Zn-NDI and Cu-NDI were successfully prepared and retained on the surface of copy paper, the wavelength of photochromic reaction is between 300-400 nm of MOFs materials. Optical analysis confirmed that the NDI/paper, Zn-NDI/paper and Cu-NDI/paper changed from tan to wheat, light green to olive, and dark tan to brown after 60 seconds of exposure to hernia light irradiations, the MOFs coated paper returned to its original color when it was placed in the dark for 4 hours. The above results indicated that the prepared Zn-NDI and Cu-NDI coated paper composites exhibited excellent photochromic ability and had potential applications in the field of anti-counterfeiting packaging materials. [ABSTRACT FROM AUTHOR]