Search

Reconfigurable intelligent surfaces (RISs) have drawn considerable attention due to their ability to direct electromagnetic waves into desirable directions. Although RISs share some similarities with relays, the two have fundamental differences impacting their performance. To harness the benefits of both, we propose a downlink system wherein a relay and an RIS improve performance in terms of energy-efficiency. Using singular value decomposition (SVD), semidefinite programming (SDP), and function approximations, we propose different solutions for optimizing the beamforming matrices at the base-station (BS), the relay, and the phase shifts at the RIS to minimize the total power under quality-of-service (QoS) constraints. The problem is solved when the relay operates in half-duplex and full-duplex modes and when the reflecting elements have continuous and discrete phase shifts. Simulation results compare the performance of the system with and without the RIS or the relay, under different optimization solutions. The results show that the system with full-duplex relay and RIS outperforms the other scenarios, and the contribution of full-duplex relay is higher than that of the RIS. However, an RIS outperforms a half-duplex relay when the required QoS is high. The results also show that increasing the number of reflecting elements improves the performance better in the presence of a relay than in its absence. [ABSTRACT FROM AUTHOR]

Cloud radio-access networks (C-RAN) have been proposed as an enabling technology for keeping up with the requirements of next-generation wireless networks. Most existing works on C-RAN study the uplink or the downlink separately. However, designing the uplink and the downlink jointly may bring additional advantages, especially if message source-destination information is taken into account. In this paper, this idea is demonstrated by considering pairwise message exchange between users in a C-RAN. A multi-pair two-way transmission scheme is proposed which targets maximizing the end-to-end sum rate. In the proposed scheme, a lattice-based computation strategy is used, where the baseband processing unit (BBU) pool decodes integer linear combinations of paired users’ codewords instead of decoding linear combinations of individual codewords. The BBU pool then precodes the computed signals, compresses, and forwards them to the remote radio heads (RRHs), which in turn decompress the signals and send them to the users. Finally, each user decodes its desired message using its own message as side information. The achievable rate of this scheme is derived, optimized, and evaluated numerically. Simulation results reveal that significant end-to-end rate improvement can be achieved using the proposed scheme compared to existing schemes. [ABSTRACT FROM AUTHOR]

The characterization of fundamental performance bounds of many-to-many communication systems in which participating nodes are active in an intermittent way is one of the major challenges in communication theory. In order to address this issue, we introduce the multiple-input multiple-output (MIMO) three-way channel (3WC) with an intermittent node and study its degrees-of-freedom (DoF) region and sum-DoF. We devise a non-adaptive encoding scheme based on zero-forcing, interference alignment, and erasure coding, and show its DoF region (and thus sum-DoF) optimality for non-intermittent 3WCs and its sum-DoF optimality for (node-) intermittent 3WCs. However, we show by example that in general some DoF tuples in the intermittent 3WC can only be achieved by adaptive schemes such as decode-forward relaying. This shows that non-adaptive encoding is sufficient for the non-intermittent 3WC and for the sum-DoF of intermittent 3WCs but adaptive encoding is necessary for the DoF region of intermittent 3WCs. This paper contributes to a better understanding of the fundamental limits of multi-way communication systems with intermittency and the impact of adaptation therein. [ABSTRACT FROM AUTHOR]

The impact of cooperation on interference management is investigated by studying an elemental wireless network, the so-called symmetric interference relay channel (IRC), from a generalized degrees of freedom (GDoF) perspective. This is motivated by the fact that the deployment of relays is considered as a remedy to overcome the bottleneck of current systems in terms of achievable rates. The focus of this paper is on the regime in which the interference link is weaker than the source-relay link in the IRC. Our approach toward studying the GDoF goes through the capacity analysis of the linear deterministic IRC (LD-IRC). New upper bounds on the sum capacity of the LD-IRC based on genie-aided approaches are established. These upper bounds together with some existing upper bounds are achieved by using four novel transmission schemes. Extending the upper bounds and the transmission schemes to the Gaussian case, the GDoF of the Gaussian IRC is characterized for the aforementioned regime. This completes the GDoF results available in the literature for the symmetric GDoF. It turns out that even if the incoming and outgoing links of the relay are both weaker than the desired channel, involving a relay can increase the GDoF. Interestingly, utilizing the relay in this case can increase the slope of the GDoF from −2 [in the interference channel (IC)] to −1 or 0. This shrinks the regime where ignoring the interference by treating it as noise is optimal. Furthermore, the analysis shows that if the relay ingoing and outgoing links are sufficiently strong, the relay is able to neutralize the interference completely. In this case, the bottleneck of the transmission will be the interference links, and hence, the GDoF increases if the interference link gets stronger. It is shown that in the strong interference regime, in contrast to the IC, the GDoF can be a monotonically decreasing function of the interference level. [ABSTRACT FROM PUBLISHER]

A network of three nodes mutually communicating with each other is studied. This multi-way network is a suitable model for three-user device-to-device communications. The main goal of this paper is to characterize the capacity region of the underlying Gaussian three-way channel (3WC) within a constant gap. To this end, a capacity outer bound is derived using cut-set bounds and genie-aided bounds. For achievability, the 3WC is first transformed into an equivalent star channel. This latter is then decomposed into a set of “successive” sub-channels, leading to a sub-channel allocation problem. Using backward decoding, interference neutralization, and known results on the capacity of the star-channel relying of physical-layer network coding, an achievable rate region for the 3WC is obtained. It is then shown that the achievable rate region is within a constant gap of the developed outer bound, leading to the desired capacity approximation. Interestingly, in contrast to the Gaussian two-way channel (TWC), adaptation is necessary in the 3WC. Furthermore, message splitting is another ingredient of the developed scheme for the 3WC, which is not required in the TWC. The two setups are, however, similar in terms of their sum-capacity pre-log, which is equal to 2. Finally, some interesting networks and their approximate capacities are recovered as special cases of the 3WC, such as the cooperative broadcast channel and multiple access channel. [ABSTRACT FROM PUBLISHER]

In this letter, we investigate the potential benefits of adopting improper Gaussian signaling (IGS) in a two-hop alternate relaying (AR) system. Given the known benefits of using IGS in interference-limited networks, we propose to use IGS to relieve the inter-relay interference (IRI) impact on the AR system assuming no channel state information is available at the source. In this regard, we assume that the two relays use IGS and the source uses proper Gaussian signaling (PGS). Then, we optimize the degree of impropriety of the relays signal, measured by the circularity coefficient, to maximize the total achievable rate. Simulation results show that using IGS yields a significant performance improvement over PGS, especially when the first hop is a bottleneck due to weak source-relay channel gains and/or strong IRI. [ABSTRACT FROM PUBLISHER]

The impact of multi-hopping schemes on the communication latency in a relay channel is studied. The main aim is to characterize conditions under which such schemes decrease the communication latency given a reliability requirement. Both decode-forward (DF) and amplify-forward (AF) with block coding are considered, and are compared with the point-to-point (P2P) scheme which ignores the relay. Latency expressions for the three schemes are derived, and conditions under which DF and AF reduce latency are obtained for high signal-to-noise ratio (\mathsfSNR). Interestingly, these conditions are more strict when compared to the conditions under which the same multi-hopping schemes achieve higher long-term (information-theoretic) rates than P2P. It turns out that the relation between the source-destination \mathsfSNR and the harmonic mean of the \mathsfSNR’s of the channels to and from the relay dictates whether multi-hopping reduces latency or not. [ABSTRACT FROM PUBLISHER]

The $K$ -user multiple-input multiple-output (MIMO) multi-way relay channel (Y-channel) consisting of $K$ users with $M$ antennas each and a common relay node with $N$ antennas is studied in this paper. Each user wants to exchange messages with all the other users through the relay. A transmission strategy is proposed for this channel. The proposed strategy is based on two steps: 1) channel diagonalization and 2) cyclic communication. The channel diagonalization is applied by using zero-forcing beam-forming. After the channel diagonalization, the channel is decomposed into parallel sub-channels. Cyclic communication is then applied, where signal-space alignment for network-coding is used over each sub-channel. The proposed strategy achieves the optimal degree-of-freedom (DoF) region of the channel if $N\leq M$ . To prove this, a new DoFs outer bound is derived. As a by-product, we conclude that the MIMO Y-channel is not separable, i.e., independent coding on separate sub-channels is not enough, and one has to code jointly over several sub-channels. [ABSTRACT FROM AUTHOR]

A full-duplex wireless network with three users that want to establish full message exchange via a relay is considered. Thus, this network which is known as the Y-channel has a total of six messages, two outgoing, and two incoming at each user. The users are not physically connected, and thus the relay is essential for their communication. The deterministic Y-channel is considered first, its capacity region is characterized, and shown not to be given by the cut-set bounds. The capacity achieving scheme has three different components (strategies): 1) a bidirectional; 2) a cyclic; and 3) a unidirectional strategy. Network coding is used to realize the bidirectional and the cyclic strategies, and thus to prove the achievability of the capacity region. The result is then extended to the Gaussian Y-channel where the capacity region is characterized within a constant gap independent of the channel parameters. [ABSTRACT FROM AUTHOR]

The symmetric two-user Gaussian interference relay channel (IRC) is studied from a generalized degrees of freedom (GDoF) perspective. While it is known that the relay does not increase the DoF of the IRC, such a characterization has not been reported for the GDoF yet. The focus of this paper is on all cases where the interference link is stronger than the link from the source to the relay. This regime basically covers half the space of all possible parameters of the IRC. By using genie-aided approaches, new sum-capacity upper bounds are derived. These bounds are then compared with rates achieved with a novel transmission scheme, which is based on a functional decode-and-forward (FDF) strategy. It is shown that the GDoF of the IRC is achieved by FDF in the given regime, and that a relay can indeed increase the GDoF of IRC. Finally, the FDF scheme is compared with other schemes like decode-and-forward as well as compress-and-forward at low, moderate, and high signal-to-noise ratios. [ABSTRACT FROM PUBLISHER]