Search

Due to strong stress sensitivity resulted from unconventional tight formationsit is of practical interest to formulate a reasonable pressure drawdown plan to improve gas extraction recovery. The impact of water-shale interactions on the reservoir permeability was previously ignored in the managed pressure drawdown optimization. The controlled-pressure production dynamic analysis was mostly conducted using numerical simulation, lack of rigorous theoretical support. Hence in this paper, a theoretical production prediction model was proposed and verified with HIS RTA 2015by incorporating multiple pressure drawdown mechanisms and various non-linear gas flow process. The on-site production effects dominated by two different pressure drop methods was further compared, indicating that compared to depressurization production, the production reversion can occur in the controlled pressure production process and the EUR of single well can be increased by about 30% under the control of managed pressure drawdown approach. Finally, the pressure drawdown optimization strategy was carried out on the field test from the both production effect and economic benefits, which demonstrated that the best economic solution can generally be obtained in the early stage of production. The research results can be closely linked to the on-site production practice of shale gas wells, providing insights into designing optimized production strategy scheme. [ABSTRACT FROM AUTHOR]

The shale gas productivity model based on shale gas nonlinear seepage mechanism is an effective way to reasonably predict productivity. The incomplete gas nonlinear effects considered in the current production prediction models can lead to inaccurate production prediction. Based on the conventional five-zone compound flow model, comprehensive gas nonlinearities were considered in the improved compound linear flow model proposed in the paper and a semianalytical solution for productivity was obtained. The reliability of the productivity model was verified by the field data, and then, the 20-year production performance analysis of the gas well was studied. Ultimately, the key influencing factors of the fracture control stage and matrix control stage have been analyzed. Research indicated the following: (1) the EUR predicted by the productivity model is higher than the EUR that the comprehensive nonlinear effects are not considered, which demonstrated that the various nonlinear effects cannot be neglected during the production prediction to ensure the greater calculation accuracy; (2) during the early production stage of shale reservoir, the adsorbed gas is basically not recovered, and the cumulative adsorption contribution rate does not exceed 10%. The final adsorption gas contribution rate is 23.28%, and the annual adsorption rate can exceed 50% in the 20th year, showing that free gas and adsorbed gas are, respectively, important sources of the early stage of production and long-term stable production; (3) the widely ranged three-dimensional fracturing reformation of shale reservoirs and reasonable bottom hole pressure in the later matrix development process should be implemented to increase the effective early production of the reservoir and ensure the earlier gas production process of the matrix development. The findings of this study can help for better ensuring the prediction accuracy of the estimated ultimate recovery and understanding the main influencing factors of the dynamic performance of gas wells so as to provide a theoretical reference for production optimization and development plan formulation of the shale gas reservoirs. [ABSTRACT FROM AUTHOR]

The shale gas productivity model based on shale gas nonlinear seepage mechanism is an effective way to reasonably predict productivity. The incomplete gas nonlinear effects considered in the current production prediction models can lead to inaccurate production prediction. Based on the conventional five-zone compound flow model, comprehensive gas nonlinearities were considered in the improved compound linear flow model proposed in the paper and a semianalytical solution for productivity was obtained. The reliability of the productivity model was verified by the field data, and then, the 20-year production performance analysis of the gas well was studied. Ultimately, the key influencing factors of the fracture control stage and matrix control stage have been analyzed. Research indicated the following: (1) the EUR predicted by the productivity model is higher than the EUR that the comprehensive nonlinear effects are not considered, which demonstrated that the various nonlinear effects cannot be neglected during the production prediction to ensure the greater calculation accuracy; (2) during the early production stage of shale reservoir, the adsorbed gas is basically not recovered, and the cumulative adsorption contribution rate does not exceed 10%. The final adsorption gas contribution rate is 23.28%, and the annual adsorption rate can exceed 50% in the 20th year, showing that free gas and adsorbed gas are, respectively, important sources of the early stage of production and long-term stable production; (3) the widely ranged three-dimensional fracturing reformation of shale reservoirs and reasonable bottom hole pressure in the later matrix development process should be implemented to increase the effective early production of the reservoir and ensure the earlier gas production process of the matrix development. The findings of this study can help for better ensuring the prediction accuracy of the estimated ultimate recovery and understanding the main influencing factors of the dynamic performance of gas wells so as to provide a theoretical reference for production optimization and development plan formulation of the shale gas reservoirs. [ABSTRACT FROM AUTHOR]

Abstract Shale gas is a potential substitute for the gradually depleted conventional oil and gas resources. Since studies on microscopic behavior of shale gas in nano−slits and the exact mechanical mechanisms behind it are still in urgent demand, this paper uses the model of graphite layers to describe microscopic details of shale gas occurrence behavior in organic−rich nano−slits from the viewpoint of molecular interactions by molecular simulation. "Dual adsorption mechanisms" and the consistency theory of gas distributions affected by wall effects under the condition of no overlapped wall force field are proposed to clarify the formation mechanisms of shale gas in the nano−slits. Results also show the critical channel width for all gases to be affected by the nano−scale effects is between 1 and 2 nm, and the regions (counted from the gas zone) for overlapped wall force field in 0.5 and 1 nm slits are about 0.32 and 0.42 nm, respectively. Furthermore, the effects of overlapped wall forces, channel size and pressure variations on gas aggregation and its movability etc., interaction mechanisms inside the nano−slits and their causalities, the development enlightenment for Knudsen layer (KL) and the whole gas have been explicitly depicted and clarified, which is expected to be a useful reference not only for shale gas evaluation and exploitation, but also for widespread research of gas occurrence phenomena in carbon−based materials in the field of industry. Highlights • Systematic interactions for partial shale gas and its relationship with microscopic gas behavior in nano−slits are studied. • "Dual adsorption mechanisms" and the consistency theory of gas distributions are proposed. • The enlightenment for gas development is presented from the viewpoint of microscopic mechanical mechanisms. [ABSTRACT FROM AUTHOR]

As an unconventional natural gas resource, shale gas is attracting increasing attention worldwide because of its potential to strengthen global energy security and reduce carbon emissions. The shale gas flow in nanopores is one of the main concerns affecting its development process. However, due to the strong nonlinearity and complexity of gas flow at the nanoscale, there is no satisfactory consensus on a physically sound flow mechanism scheme and its corresponding coupling method. Furthermore, although the integration method using specific functions has been proposed to facilitate the consideration of various pore sizes in shale matrix, the real shale experiments are rarely involved to realize this integration method with definitely determined parameters. In this study, the concept of "wall-associated diffusion" is firstly utilized to clarify the relationship among several flow mechanisms, and thereby a comprehensive flow mechanism scheme differing from common research is proposed, which physically considers both the division of mechanical mechanisms in nanopores and partition of flow space. Besides, the deficiencies in the mathematical models of viscous flow and several diffusion processes for flow description are illustrated. Using the molecular collision frequency expressions, a new coupling coefficient-based flow model in nanopores is derived to eliminate the aforementioned deficiencies by strengthening the correspondence between the flow models and Knudsen number (Kn), which is applicable in the full flow regime scope and avoids segment processing. Furthermore, based on the pore size distribution experiments of the real shale samples from a gas field, the fitting parameters needed for the macroscopic form of the above coupled model are obtained, so as to establish an integration method-based unified model for gas flow prediction in shale matrix. Results show that the prediction accuracy of the new model for the two tested shale samples is at least 2.2 times higher than several typical models and is also 1.9 and 7.5 times more accurate than the model without coupling coefficients, respectively. And the application of the proposed model to the flow experiment on another shale sample at higher pressure levels is in accordance with these observations. Interestingly, as temperature increases, the flow rate decreases with minor amplitudes. Under the conditions studied, the pressure change can cause over 10 times variation of the flow rate, revealing measures should be taken to maintain relatively high reservoir pressures to guarantee appreciable gas production from matrix if the other factors remain unchanged. In addition, the difference between the average flow shape in the whole rock and the gas motion in the pore of mean radius is revealed. Sounder in theoretical bases and better in application effects, the proposed model is expected to be of practical significance for guiding shale gas reservoir development. • A comprehensive flow mechanism scheme differing from com-mon re-search is proposed. • A new coupled flow model with deduced coupling coefficients is established. • A unified model, i.e. the macroscopic form of the new coupled model, is obtained. [ABSTRACT FROM AUTHOR]