Search

Dual-comparison one-cycle control for the bidirectional power flow in single-phase grid-connected converters is proposed in this paper. Advantages of dual-comparison one-cycle control when compared to conventional one-cycle control is that it does not give any steady-state dc offset, no light-load instability, and implements unipolar pulsewidth modulation without having to sense the grid voltage. Addition of a fictitious current term, which is generated from the gating signal of one of the active devices, using a bandpass filter, enables the bidirectional power flow. The quality factor of the bandpass filter is shown to impact the total harmonic distortion in current, fundamental displacement angle, and steady-state dc offset. The optimal value of a quality factor, obtained with aid of simulations, gives a superior performance. The current drawn or injected into the grid is seen to lag the grid voltage. The reason for a nonunity displacement power factor is analyzed and a compensation to achieve a unity displacement power factor is also proposed in this paper. Detailed simulation and experimental studies are carried out to validate the proposed control and the high performance that can be obtained. [ABSTRACT FROM AUTHOR]

Resistance emulation using one cycle control (OCC) has been used extensively in single-phase full-bridge boost rectifiers. This paper proposes a new control strategy called dual comparison OCC (DC-OCC), which eliminates the limitations of OCC. The advantages of the proposed control strategy is that it ensures the average current is equal to grid voltage scaled by emulated resistance, in each switching cycle. This eliminates issues such as dc offset due to the peak current comparison in OCC. It also ensures that there is no distortion in current when the converter is lightly loaded. It is analytically shown that the proposed DC-OCC does not have the light load instability concerns of conventional OCC. The proposed method is also shown to achieve unipolar pulse-width modulation without sensing the grid voltage resulting in lower effective switching frequency. The proposed control requires only one additional comparator and additional logical elements for implementation. Detailed simulation and experimental studies are carried to validate the proposed control and the high performance that can be obtained. [ABSTRACT FROM PUBLISHER]