Search

Halide perovskites (HPs) recently have emerged as one class of competitive scintillators for X‐ray detection and imaging owing to its high quantum efficiency, short decay time, superior X‐ray absorption capacity, low cost, and ease of crystal growth. The tunable structure and versatile chemical compositions of halide perovskites provide distinguishable advantages over traditional inorganic scintillators for optimizing scintillation performance. Since the first observation of the scintillation phenomenon in HPs, substantial efforts have been devoted to expanding the inventory of HP scintillators and regulating material properties. Understanding the relationship between the structure and scintillation properties of HP scintillators is essential for developing materials with improved X‐ray detection and imaging capacities. This review summarizes strategies for improving the light yield of HP scintillators and provides a roadmap for improving the X‐ray imaging performance. Additionally, methods for controlling the light propagation direction in HP scintillators are highlighted for improving X‐ray imaging resolution. Finally, we highlight the current challenge in HP scintillators and provide a perspective on the future development of this emerging scintillator. [ABSTRACT FROM AUTHOR]

Halide hybrid perovskites are attracting considerable attention as highly promising candidates for directly sensing X‐ray radiation, but it is challenging to realize passive X‐ray detection without an external power supply. However, the bulk photovoltaic effect (BPVE) in ferroelectrics promotes the independent separation of photoexcited carriers. Herein, by dimensionality reconstruction of a pure‐two‐dimensional (P‐2D) monolayered perovskite (CH3OC3H9N)2PbBr4, we obtained a quasi‐two‐dimensional (Q‐2D) ferroelectric (CH3OC3H9N)2CsPb2Br7. Converting P‐2D into Q‐2D perovskite stimulates a significant BPVE associated with robust ferroelectricity, as well as an enhanced mobility lifetime product. These features show the potential of the first passive X‐ray detector based on ferroelectrics with an impressive sensitivity up to 410 μC Gy−1 cm−2 at zero bias, which is even superior to the value of the state‐of‐the‐art α‐Se detector operated at relatively high bias. [ABSTRACT FROM AUTHOR]

A wide range of tunability in the physical parameters of a semiconductor used for X‐ray detection is desirable to achieve targeted performance optimization. However, in a dense‐phase semiconductor, fine‐tuning one parameter often leads to unwanted changes in other parameters. Herein, the intrinsic openness in an open‐framework semiconductor has been confirmed, for the first time, to be a key structural factor that weakens the mutual exclusivity of the adjustable physical parameters owing to a non‐linear control mechanism. The controllable doping of S in a zeolitic In–Se host results in an optimal balance between resistivity, band gap, and carrier mobility, which finally results in an excellent X‐ray detector with a high figure of merit for the mobility–lifetime product (7.12×10−4 cm2 V−1); this value is superior to that of a commercial α‐Se detector. The current strategy of choosing open‐framework semiconductor materials opens a new window for targeting high‐performance X‐ray detection. [ABSTRACT FROM AUTHOR]

Scintillators are a unique class of luminescent materials with specific applications towards radiation detection. The emitters within state‐of‐the‐art scintillators are mostly limited to bismuth, cerium, europium, thallium, lead, tungsten, etc. A shared feature of these elements is the relatively high atomic number, which is responsible for high radiation stopping power and radiation‐induced luminescence. Searching for new scintillating materials is an essential target aiming at specific applications. In this Concept article, we will discuss our recent works on the topic of "uranyl‐bearing scintillators". As a virgin territory in this field, uranyl‐bearing scintillators show intrinsic merits for designing new materials with X‐ray detection capability, that is, the large photoelectric cross‐section, high X‐ray attenuation efficiency, and high crystal density. In addition, we also present challenges in the further development of the uranyl‐bearing scintillators. [ABSTRACT FROM AUTHOR]

Keywords: luminescence; radiation detection; scintillators; uranium As a new area in this field, uranyl-bearing scintillators show intrinsic merits for designing new materials with X-ray detection capability, that is, a large photoelectric cross-section, high X-ray attenuation efficiency, and high crystal density. Luminescence, radiation detection, scintillators, uranium. [Extracted from the article]

X‐ray detectors with high sensitivity are of great significance in both civil and military fields. Over the past decades, great efforts have been made to improve the sensitivity in conventional inorganic materials, but mainly at the cost of increasing the energy consumption with a quite high operating voltage. Developing photosensitive ferroelectrics directly as detector materials may be a conceptually new strategy in view of the strong ferroelectric spontaneous polarization (Ps) that assists photoinduced carriers separation and transport. A high‐performance X‐ray detector in 2D hybrid halide perovskite ferroelectric (C4H9NH3)2(C2H5NH3)2Pb3Br10 (BA2EA2Pb3Br10) (Ps = 5 µC cm−2) is fabricated and exhibits an ultrahigh X‐ray sensitivity up to 6.8 × 103 µC Gyair−1 cm−2 even at a relatively low operating voltage, which is over 300‐fold larger than that of state‐of‐the‐art α‐Se X‐ray detectors. Such a brilliant figure‐of‐merit is largely attributed to the superior mobility–lifetime products associated with the strong ferroelectric polarization of BA2EA2Pb3Br10. As pioneering work, these findings inform the exploration of hybrid halide perovskite ferroelectrics toward high‐performance photoelectronic devices. [ABSTRACT FROM AUTHOR]