Search

Abstract Slippery surfaces (i.e., surfaces that display high liquid droplet mobility) are receiving significant attention due to their biofluidic applications. Non‐textured, all‐solid, slippery hydrophilic (SLIC) surfaces are an emerging class of rare and counter‐intuitive surfaces. In this work, the interactions of blood and bacteria with SLIC surfaces are investigated. The SLIC surfaces demonstrate significantly lower platelet and leukocyte adhesion (≈97.2% decrease in surface coverage), and correspondingly low platelet activation, as well as significantly lower bacterial adhesion (≈99.7% decrease in surface coverage of live Escherichia Coli and ≈99.6% decrease in surface coverage of live Staphylococcus Aureus) and proliferation compared to untreated silicon substrates, indicating their potential for practical biomedical applications. The study envisions that the SLIC surfaces will pave the path to improved biomedical devices with favorable blood and bacteria interactions.

Omniphobic membranes are attractive for membrane distillation because of their superior wetting resistance. Here the authors develop a particle-free approach for rapid fabrication of monolithic omniphobic membranes and elucidate the underlying mechanism of wetting resistance-vapor permeability trade-off in membrane distillation desalination.

A systematic electrical and rheological characterization of percolation in commercial polydisperse polystyrene (PS) nanocomposites containing multiwall carbon nanotubes (MWCNTs) is presented. The MWCNTs confer appreciable electrical conductivities (up to ca. 1 S/m) to these nanocomposites at a concentration of 8 vol %. In addition to enhancing the electrical properties, even at small concentrations (ca. 2 vol %), MWCNTs significantly enhance the rheological properties of PS melts. At concentrations exceeding 2 vol %, a plateau appears in the storage modulus G‘ at low frequencies, indicating the formation of a percolated MWCNT network that responds elastically over long timescales. Network formation, in turn, implies a diverging complex viscosity vs complex modulus curve. A focus of this study is on the correlation between electrical and rheological properties at the onset of percolation. The experimental results indicate that the elastic load transfer and electrical conductivity are far more sensitive to the onset of percolation than the viscous dissipation in the nanocomposite. Sensitivity of the electrical and rheological percolations to two different solvents used in processing the nanocomposites has also been characterized. [ABSTRACT FROM AUTHOR]

For the first time, an interpenetrating phase polymer nanocomposite formed by the percolation of multiwalled carbon nanotubes (MWCNTs) in polystyrene (PS) has been quantitatively characterized through electrical conductivity measurements and melt rheology. Both sets of measurements, in conjunction with scanning electron microscopy (SEM) images, indicate the presence of a continuous phase of percolated MWCNTs appearing at particle concentrations exceeding 2 vol% MWCNTs in PS. To quantify the amount of this continuous phase present in the PS/MWCNT composite, electrical conductivity data at various MWCNT concentrations, b, are correlated with a proposed degree of percolation, \bar {C}(\beta) , developed using a conventional power-law formula with and without a percolation threshold. To quantify the properties of the interpenetrating phase polymer nanocomposite, the PS/MWCNT composite is treated as a combination of two phases: a continuous phase consisting of a pseudo-solid-like network of percolated MWCNTs, and a continuous PS phase reinforced by non-interacting MWCNTs. The proposed degree of percolation is used to quantify the distribution of MWCNTs among the phases, and is then used in a rule-of-mixtures formulation for the storage modulus, G''(\beta,\bar {C}(\beta), \omega) , and the loss modulus, G''''(\beta,\bar {C}(\beta),\omega) , to quantify the properties of the continuous phase consisting of percolated MWCNTs and the continuous PS phase reinforced by non-interacting MWCNTs from the experimental melt rheology data. The properties of the continuous phase of percolated MWCNTs are indicative of a scaffold-like microstructure exhibiting an elastic behavior with a complex modulus of 360 kPa at lower frequencies and viscoplastic behavior with a complex viscosity of 6 kPa s rad[?]1 at higher frequencies, most likely due to a stick-slip friction mechanism at the interface of the percolated MWCNTs. Additional evidence of this microstructure was obtained via scanning electron microscopy. This research has important implications in providing a new methodology based on the electrical and rheological properties of the polymer nanocomposite for quantifying the continuous phase formed by the percolation of new functionalized nanostructures being developed for: (a) controlling the percolation of the nanostructures through self-assembly, (b) enhancing their interaction with the continuous reinforced polymer phase, (c) enhancing the cohesion between nanostructures. [ABSTRACT FROM AUTHOR]