Search

The morphology of dodecane in a nanopore at temperatures typical in exploited or depleted oil reservoirs is investigated using molecular dynamics simulation. The dodecane morphology is found to be determined by interactions between interfacial crystallization and surface wetting of the simplified oil, while "evaporation" only plays a minor role. The morphology changes from an isolated, solidified dodecane droplet to a film with orderly lamellae structures remaining within, and finally to a film containing randomly distributed dodecane molecules, as the system temperature increases. In a nanoslit under the impact of water, since water wins against oil in surface wetting on the silica surface due to electrostatic interaction induced hydrogen bonding between water and the silanol group of silica, the spreading of dodecane molecules over the silica surface is impeded by this water confinement mechanism. Meanwhile, interfacial crystallization is enhanced, leading to always an isolated dodecane "droplet," with crystallization weakening as the temperature increases. Since dodecane is immiscible to water, there is no mechanism for dodecane to escape the silica surface, and the competition of surface wetting between water and oil determines the morphology of the crystallized dodecane droplet. For the CO2–dodecane system in a nanoslit, CO2 is an efficient solvent for dodecane at all temperatures. Therefore, interfacial crystallization rapidly disappears. The competition of surface adsorption between CO2 and dodecane is secondary for all cases. The dissolution mechanism is a clear clue for the fact that CO2 is more effective than water flooding in oil recovery for a depleted oil reservoir. [ABSTRACT FROM AUTHOR]

This paper presents an analytical formulation and a finite element analysis of the behavior of multilayer unbonded flexible risers. The finite element model accurately incorporates all the fine details of the riser that were previously considered to be important but too difficult to simulate due to the significant associated computational cost. All layers of the riser are separately modeled, and contact interaction between layers has been accounted for. The model includes geometric nonlinearity as well as frictional effects. The analysis considers the main modes of flexible riser loading, which include internal and external pressures, axial tension, torsion, and bending. Computations were performed by employing a fully explicit time integration scheme on a parallel 16-processor cluster of computers. Consistency of simulation results was demonstrated by comparison with those of the analytical model of an identical structure. The close agreement gives confidence in both approaches. [DOI: 10.1115/1.3058700] Keywords: unbonded flexible riser, cyclic loading, stick-slip interaction

This paper presents a detailed finite-element analysis of unbonded flexible risers. The numerical results are compared to the analytical solutions for various load cases. In the finite-element model, all layers are modeled separately with contact interfaces between each layer. The finite-element model includes the main features of the riser geometry with very little simplifying assumptions made. The numerical model was solved using a fully explicit time-integration scheme implemented in a parallel environment on a 16-processor cluster. The very good agreement found from numerical and analytical comparisons validates the use of our numerical model to provide benchmark solutions against which further detailed investigation will be made.

This paper describes a parametric study of drill string threaded connector design based on a 'factorial design' method. The study is facilitated by a hybrid model which has been developed, validated, and reported previously, enabling efficient calculation of load and stress distribution along threaded connectors subjected to both axial and bending modes of loading. A parametric equation is produced where stress concentration factor is defined in terms of various geometrical variables. The equation is then utilized to carry out a constrained optimization within the feasible parameter space, and hence produce an 'optimum' thread and connector design.