Search

Industrialization has brought many environmental problems since its expansion, including heavy metal contamination in water used for agricultural irrigation. This research uses microbial fuel cell technology to generate bioelectricity and remove arsenic, copper, and iron, using contaminated agricultural water as a substrate and Bacillus marisflavi as a biocatalyst. The results obtained for electrical potential and current were 0.798 V and 3.519 mA, respectively, on the sixth day of operation and the pH value was 6.54 with an EC equal to 198.72 mS/cm, with a removal of 99.08, 56.08, and 91.39% of the concentrations of As, Cu, and Fe, respectively, obtained in 72 h. Likewise, total nitrogen concentrations, organic carbon, loss on ignition, dissolved organic carbon, and chemical oxygen demand were reduced by 69.047, 86.922, 85.378, 88.458, and 90.771%, respectively. At the same time, the PDMAX shown was 376.20 ± 15.478 mW/cm2, with a calculated internal resistance of 42.550 ± 12.353 Ω. This technique presents an essential advance in overcoming existing technical barriers because the engineered microbial fuel cells are accessible and scalable. It will generate important value by naturally reducing toxic metals and electrical energy, producing electric currents in a sustainable and affordable way.

The accelerated increase in energy consumption by human activity has generated an increase in the search for new energies that do not pollute the environment, due to this, microbial fuel cells are shown as a promising technology. The objective of this research was to observe the influence on the generation of bioelectricity of sucrose, with different percentages (0%, 5%, 10% and 20%), in papaya waste using microbial fuel cells (MFCs). It was possible to generate voltage and current peaks of 0.955 V and 5.079 mA for the cell with 20% sucrose, which operated at an optimal pH of 4.98 on day fifteen. In the same way, the internal resistance values of all the cells were influenced by the increase in sucrose, showing that the cell without sucrose was 0.1952 ± 0.00214 KΩ and with 20% it was 0.044306 ± 0.0014 KΩ. The maximum power density was 583.09 mW/cm2 at a current density of 407.13 A/cm2 and with a peak voltage of 910.94 mV, while phenolic compounds are the ones with the greatest presence in the FTIR (Fourier transform infrared spectroscopy) absorbance spectrum. We were able to molecularly identify the species Achromobacter xylosoxidans (99.32%), Acinetobacter bereziniae (99.93%) and Stenotrophomonas maltophilia (100%) present in the anode electrode of the MFCs. This research gives a novel use for sucrose to increase the energy values in a microbial fuel cell, improving the existing ones and generating a novel way of generating electricity that is friendly to the environment.

The use of organic waste as fuel for energy generation will reduce the great environmental problems currently caused by the consumption of fossil sources, giving agribusiness companies a profitable way to use their waste. In this research, tomato waste with different percentages of sucrose (0-target, 5, 10, and 20%) was used in microbial fuel cells manufactured on a laboratory scale with zinc and copper electrodes, managing to generate maximum peaks of voltage and a current of 1.08 V and 6.67 mA in the cell with 20% sucrose, in which it was observed that the optimum operating pH was 5.29, while the MFC with 0% (target) sucrose generated 0.91 V and 3.12 A on day 13 with a similar pH, even though all the cells worked in an acidic pH. Likewise, the cell with 20% sucrose had the lowest internal resistance (0.148541 ± 0.012361 KΩ) and the highest power density (224.77 mW/cm2) at a current density of 4.43 mA/cm2, while the MFC with 0% sucrose generated 160.52 mW/cm2 and 4.38 mA/cm2 of power density and current density, respectively, with an internal resistance of 0.34116 ± 0.2914 KΩ. In this sense, the FTIR (Fourier-transform infrared spectroscopy) of all the substrates used showed a high content of phenolic compounds and carboxylate acids. Finally, the MFCs were connected in a series and managed to generate a voltage of 3.43 V, enough to light an LED (green). These results give great hope to companies and society that, in the near future, this technology can be taken to a larger scale.

The improper disposal of plastic waste has become a significant problem, with only a small amount recycled and the rest ending up in landfills or being burned, leading to environmental pollution. In addition, the cost of electric energy has risen by over 100% in the last 20 years, making it unaffordable for remote areas to access this service due to high installation costs, leaving people living far from major cities without electricity. This study proposes an innovative solution to these issues using microbial fuel cell (MFC) technology to simultaneously reduce plastic waste and generate electric energy by utilizing the fungus Aspergillus sp. As a substrate for 45 days. The MFCs reached maximum values of 0.572 ± 0.024 V and 3.608 ± 0.249 mA of voltage and electric current on the thirty-first day, with the substrate operating at a pH of 6.57 ± 0.27 and an electrical conductivity of 257.12 ± 20.9 mS/cm. Furthermore, it was possible to reduce the chemical oxygen demand by 73.77% over the 45 days of MFC operation, while the recorded internal resistance was 27.417 ± 9.810 Ω, indicating a power density of 0.124 ± 0.006 mW/cm2. The initial and final transmittance spectra, obtained using FTIR (Fourier Transform Infrared), showed the characteristic peaks of polyethylene (plastic), with a noticeable reduction in the final spectrum, particularly in the vibration of the C-H compound. After 45 days of fungus operation, the plastic surface used as a sample exhibited perforations and cracks, resulting in a thickness reduction of 313.56 µm. This research represents an initial step in using fungi for plastic reduction and electric energy generation in an alternative and sustainable manner. [ABSTRACT FROM AUTHOR]

The growing demand for agricultural products has increased exponentially, causing their waste to increase and become a problem for society. Searching for sustainable solutions for organic waste management is increasingly urgent. This research focuses on considering the waste of an Andean tuber, such as Olluco, as a fuel source for generating electricity and becoming a potential sustainable energy source for companies dedicated to this area. This research used Olluco waste as fuel in single-chamber microbial fuel cells using carbon and zinc electrodes. An electric current and electric potential of 6.4 ± 0.4 mA and 0.99 ± 0.09 V were generated, operating with an electrical conductivity of 142.3 ± 6.1 mS/cm and a pH of 7.1 ± 0.2. It was possible to obtain a 94% decrease in COD and an internal resistance of 24.9 ± 2.8 Ω. The power density found was 373.8 ± 28.8 mW/cm2 and the current density was 4.96 A/cm2. On day 14, the cells were connected in earnest, achieving a power of 2.92 V and generating enough current to light an LED light bulb, thus demonstrating the potential that Olluco waste has to be used as fuel in microbial fuel cells. [ABSTRACT FROM AUTHOR]

To determine the effect of the "Healthy Dish" method to reduce waist circumference in teachers with abdominal obesity in a Peruvian University. Methods: Quasi-experimental, prospective study in 43 teachers, divided into 21 in the control group and 22 in the experimental group, who received a two-session workshop on abdominal obesity and the "Healthy Dish" method. The latter was applied for 2 months, monitored 5 days a week, the waist circumference of both groups was measured at one month and at two months and compared. For the statistical analysis, descriptive and inferential statistics or nonparametric statistics were applied (Mann–Whitney U-test, according to the assumption of normality). Results: The predominant age range was 40 to 49 years, women, married, overweight, with a family history of hypertension, cancer and diabetes mellitus. After the intervention, 40.9% of teachers in the experimental group decreased their waist circumference and 54.5% normalized it, while the control group decreased it by 23.8% and 47.6% normalized it. Only 4.54% of teachers in the experimental group showed no change in their waist circumference, compared to 19.0% in the control group, and 9.52% of teachers in the control group increased their waist circumference. Conclusion: The healthy dish method has a positive effect on decreasing waist circumference in teachers with abdominal obesity. [ABSTRACT FROM AUTHOR]

Currently, industry in all its forms is vital for the human population because it provides the services and goods necessary to live. However, this process also pollutes soils and rivers. This research provides an environmentally friendly solution for the generation of electrical energy and the bioremediation of heavy metals such as arsenic, iron, and copper present in river waters used to irrigate farmers' crops. This research used single-chamber microbial fuel cells with activated carbon and zinc electrodes as anodes and cathodes, respectively, and farmers' irrigation water contaminated with mining waste as substrate. Pseudomonas stutzeri was used as a biocatalyst due to its ability to proliferate at temperatures between 4 and 44 °C—at which the waters that feed irrigated rivers pass on their way to the sea—managing to generate peaks of electric current and voltage of 4.35 mA and 0.91 V on the sixth day, which operated with an electrical conductivity of 222 mS/cm and a pH of 6.74. Likewise, the parameters of nitrogen, total organic carbon, carbon lost on the ignition, dissolved organic carbon, and chemical oxygen demand were reduced by 51.19%, 79.92%, 64.95%, 79.89%, 79.93%, and 86.46%. At the same time, iron, copper, and arsenic values decreased by 84.625, 14.533, and 90.831%, respectively. The internal resistance values shown were 26.355 ± 4.528 Ω with a power density of 422.054 mW/cm2 with a current density of 5.766 A/cm2. This research gives society, governments, and private companies an economical and easily scalable prototype capable of simultaneously generating electrical energy and removing heavy metals. [ABSTRACT FROM AUTHOR]

The increasing generation of wastewater with high levels of pollutants has become a serious environmental challenge. In this context, sustainable technologies are required to treat wastewater efficiently. Therefore, it was proposed to evaluate the effect of the biomass of Chlorella sp. on the removal of cadmium and chemical oxygen demand (COD) from municipal wastewater in the district of Urpay, Pataz, La Libertad, Peru, and the generation of electric power through single-chamber microbial fuel cells (MFC). An experimental design was applied, where nine treatments were carried out evaluating three doses of Chlorella sp. (10%, 20% and 30%) at pH values of 6.5, 7.0, and 7.5 of the residual water. Managing to generate peak current and voltage values of 4.61 mA and 1118.5 mV in the MFC at a pH of 7.5 with a dose of 30% of Chlorella sp., this same MFC managed to decrease concentrations of cadmium and COD by 97.5 and 15% in 25 and 15 days, respectively. This investigation demonstrated the importance of Chlorella sp. for the reduction in these two parameters, managing to provide a new method for the elimination of these pollutants in wastewater. [ABSTRACT FROM AUTHOR]

Heavy metal contamination of water is a widespread problem in Peru and represents a potential threat to the ecosystem. Bacteria are an ecological alternative to treating these effluents. This research aims to determine the influence of temperature and pH on the lead (Pb) bioremoval in surface water using Serratia marcescens under laboratory conditions. The sample was collected from a stream located in Santiago de Chuco City (Peru). Treatments (T) were carried out by combining pH (5 and 7) and temperature (25, 30, and 35 °C). The bacterial inoculum (S. marcescens) was 3 × 108 CFU/mL, which was constant in all treatments. The lead bioremoval evaluation was performed in an airlift bioreactor and the incubation time was 24 h. The total lead concentration was determined using atomic absorption spectrophotometry. The results show that treatment 6 (temperature: 35 °C, pH: 5, and inoculum: 3 × 108 UFC/mL) showed a better result than the other treatments, with a removal value of 63.94%. Furthermore, the total lead concentration decreased from an initial concentration of 0.268 mg Pb/L to a final value of 0.0964 mg Pb/L. These results are still above the allowed water value (15 µg/L) according to Peruvian standards. On the other hand, temperature and pH influenced lead removal from surface water when S. marcescens was used after a short incubation period (24 h). Although an attempt was made to improve lead bioremoval by varying two parameters, temperature and pH, future research is still needed to investigate the effect of different inoculum concentrations, the use of microbial consortia, and a broader range of physicochemical parameters. [ABSTRACT FROM AUTHOR]

Background and Objectives: In Peru, the presence of antimicrobial-resistant bacteria is a constant concern in hospitals and has likely increased in frequency during the pandemic. The objective of the study was to analyze the frequency of carbapenemase-producing bacteria resistant to two carbapenems (Imipenem and Meropenem), which were isolated from Peruvian patients in the intensive care unit of the Victor Lazarte Echegaray Hospital in Trujillo (Peru) during the COVID-19 pandemic. Materials and Methods: The biological samples of the patients hospitalized in the ICU were processed in the Microbiology Diagnostic Laboratory of the Víctor Lazarte Echegaray Hospital between May 2021 and March 2022. Antimicrobial sensitivity was determined with the automated system AutoScan-4, and for the identification of the type of carbapenemase, the RESISIT-3 O.K.N K-SET cassettes were used. Results: The results show that 76 cultures (76/129) had resistance to the two carbapenems (imipenem or meropenem), where the most frequent were Klebsiella pneuomoniae (31.6%), Pseudomonas aeruginosa (26.3%), and Acinetobacter baumannii (14.5%). Pseudomonas aeruginosa cultures showed at least three carbapenemase types (KPC, NDM, and OXA-48), while A. baumannii, Escherichia coli, and Burkholderia cepacia complex presented at least two carbapenemases (NDM and OXA-48). The carbapenemase NDM was detected in Enterobacter cloacae, Morganella morganii, and Proteus mirabilis, while KPC was present in all Klebsiella pneumoniae and Klebsiella oxytoca cultures. Conclusions: The samples from patients hospitalized in the Victor Lazarte Echegaray Hospital ICU showed a high prevalence of imipenem- and meropenem-resistant bacteria. These findings are relevant and concerning from the perspective of antibiotic-resistant bacteria monitoring, control, and disinfection. Thus, an appropriate antibiotic policy must be implemented. [ABSTRACT FROM AUTHOR]

The growing global energy demand drives the need to develop new clean energy technologies. In this context, microbial fuel cells (MFC) are one of the emerging technologies with great potential for eco-friendly energy generation; however, the correct choice of electrode material is a significant limitation in the optimal configuration of MFCs. Therefore, this research evaluated the efficiency of activated carbon (AC) anode electrodes for bioenergy production in MFC using synthetic wastewater as a substrate. Peak values of voltage (1120 ± 0.050 mV), current (4.64 ± 0.040 mA), power density (208.14 ± 17.15 mW/cm2), and current density (5.03 A/cm2) were generated, and the Rint obtained was 214.52 ± 5.22 Ω. The substrate was operated at pH values from 5.31 to 7.66, maximum ORP values (858 mV) were reached, and turbidity was reduced to 25.11 NTU. The SEM-EDS (scanning electron microscopy–energy-dispersive X-ray spectroscopy) analyses allowed us to observe the morphology and composition of the AC electrodes, revealing a predominance of O, C, Si, Al, Fe, K, and Ca. It is concluded that the AC electrodes have the potential to produce bioenergy at a laboratory by means of MFC. [ABSTRACT FROM AUTHOR]

Power generation and wastewater treatment are two great challenges for sustainable development. Microbial fuel cells (MFCs) are a sustainable alternative that can generate bioelectricity in the bioremediation process of wastewater. For this reason, the objective of this research was to generate bioelectricity through double-chamber microbial-combustion cell systems from wastewater from the Covicorti Wastewater Treatment Plant (PTARC) in the anodic chamber and electrogenic bacteria such as Stenotrophomonas maltophilia, Acinetobacter bereziniae, and Achromobacteria xylosoxidans in the cathode chamber, respectively. Measurements of the voltage, current, power density, current density, and optical density of the bacteria and biochemical oxygen demand (BOD) were made. In addition, a metagenomic analysis of the wastewater sample was performed. It was shown that the MFC with A. xylosoxidans generated the highest voltage peak (1.01 ± 0.06 V) on day 24, while the MFC with S. maltophilia generated the highest current value (0.71 ± 0.02 mA). The pH levels were slightly alkaline, and the maximum anodic conductivity value was presented by the MFC with A. cerevisiae, with a peak value of 81 ± 2 mS/cm on day 24. On the other hand, a maximum power density and current density of 195,493 ± 4717 mW/m2 and 4987 A/cm2, respectively, were obtained in the MFC with A. xylosoxidans. Finally, the metagenomic analysis identified the predominant phyla of Proteobacteria present in wastewater samples capable of generating electrical energy as Bacillota, Pseudomonadota, Bacteroidota, Actinomyketone, and Campylobacterota. [ABSTRACT FROM AUTHOR]

This research used tomato waste as a substrate (fuel) in Single Chamber-Microbial Fuel Cells (scMFC) on a small scale. The electrochemical properties were monitored, the functional groups of the substrate were analyzed by Fourier Transform Infrared Spectrophotometry (FTIR) and a microbiological analysis was performed on the electrodes in order to identify the microorganisms responsible for the electrochemical process. The results show voltage peaks and an electrical current of 3.647 ± 0.157 mA and 0.957 ± 0.246 V. A pH of 5.32 ± 0.26 was measured in the substrate with an electrical current conductivity of 148,701 ± 5849 mS/cm and an internal resistance (Rint) of 77. 517 ± 8.541 Ω. The maximum power density (PD) displayed was 264.72 ± 3.54 mW/cm2 at a current density (CD) of 4.388 A/cm2. On the other hand, the FTIR spectrum showed a more intense decrease in its peaks, with the compound belonging to the phenolic groups being the most affected at 3361 cm−1. The micrographs show the formation of a porous biofilm where molecular identification allowed the identification of two bacteria (Proteus vulgaris and Proteus vulgaris) and a yeast (Yarrowia lipolytica) with 100% identity. The data found show the potential of this waste as a source of fuel for the generation of an electric current in a sustainable and environmentally friendly way, generating in the near future a mechanism for the reuse of waste in a beneficial way for farmers, communities and agro-industrial companies. [ABSTRACT FROM AUTHOR]

Biodiversity in ecosystems is threatened by plastic waste, a significant pollution problem. The research aims to use plastic, Pleorotus ostreatus mycelium, and sugarcane bagasse to develop an eco-friendly biomaterial. The preparation consisted of three phases: (1) Treatment of the underlying layer, (2) inoculation of the fungus (three different concentrations: 15%, M1; 20%, M2; and 25%, M3), and (3) dehydration of the biomaterial. The physical characterization results (density, water absorption, and texture) showed that the average density varies between 127.86 and 131.19 kg/m3; also, the M1 sample had a high percentage of water absorption (23.55%), while M2 obtained lower percentages (11.79%). In the bending test, samples M2 and M3 showed higher structural resistance with stress values of 0.682 and 0.68 MPa, respectively. Based on the results, the produced biomaterials may serve as an alternative to expanded polystyrene (EPS). Due to their moldable characteristics, they can be used in non-structural construction, packaging, and various architectural applications. The research provided promising results; however, additional parameters must be evaluated to be able to commercialize them. [ABSTRACT FROM AUTHOR]

Antibiotics are often prescribed to treat infections caused by group B Streptococcus; however, inappropriate use of antibiotics can develop resistance. Because of this, the research was carried out with the aim of evaluating the in vitro effect of the hydroalcoholic extract of Caesalpinia spinosa (Molina) Kuntze known as Taya or Tara on the viability of β-hemolytic streptococci; an experimental investigation of increasing stimulation was carried out. The hydroalcoholic extract of C. spinosa pods was worked in concentrations of 250, 500, 750, and 1000 mg/mL, which were placed on filter paper discs to perform the sensitivity test following the Kirby–Bauer method. The greatest inhibition of bacterial viability was observed in the penicillin control group (GPT-01) followed by the TCT-04 group (hydroalcoholic Tara extract 1000 mg/mL). In addition, it was found that these groups are statistically different from the rest (p < 0.05), while the lowest bacterial inhibition was obtained for the erythromycin group and the TCT-01 group (250–1000 mg/mL). It was concluded that the hydroalcoholic extract of the pods of C. spinosa (Molina) Kuntze affects the viability of β-hemolytic streptococci associated with strep pharyngitis and that this antimicrobial activity is due to the presence of tannins, steroidal flavonoid, and alkaloids. Likewise, the tested concentrations of hydroalcoholic Tara extract were found to have better antibacterial activity than erythromycin (15 µg/mL) against β-hemolytic streptococci. These results are hopeful for the traditional or herbal medicine field. However, future in vivo research is needed to determine its effectiveness in humans. [ABSTRACT FROM AUTHOR]

This research aimed to use kiwi waste as fuel to generate bioelectricity through microbial fuel cells. It was possible to generate an electrical current and voltage peaks of 3.807 ± 0.102 mA and 0.993 ± 0.061 V on day 11, showing an electrical conductivity of 189.82 ± 3.029 mS/cm and an optimum operating pH of 5.966 ± 0.121. The internal resistance of the cells was calculated using Ohm's Law, resulting in a value of 14.957 ± 0.394 Ω, while the maximum power density was 212.68 ± 26.84 mW/m2 at a current density of 4.506 A/cm2. Through the analysis of the FTIR spectra carried out on the substrate, a decrease in the characteristic organic peaks was observed due to their decomposition during the electricity-generation process. In addition, it was possible to molecularly identify the bacteria Comamonas testosteroni, Sphingobacterium sp., and Stenotropho-monas maltophila adhered to the anodized biofilm. Finally, the capacity of this residue to generate bioelectricity was demonstrated by lighting an LED bulb with a voltage of 2.85 V. [ABSTRACT FROM AUTHOR]

The effluents generated by the tannery industry have a high content of chromium and other toxic elements, representing a potential threat to ecosystems. An eco-friendly alternative to treat these effluents is the use of microorganisms, such as fungi, with the capacity to biosorb heavy metals. The present work aims to determine the effect of the molasses concentration, pH variation, and time on the removal of total chromium using the filamentous fungus Trichoderma spp. An experimental design was adopted using pH (4 and 6), concentrations of molasses (0.5 and 1%), and time (8 and 12 days) as independent variables. The Trichoderma inoculum was constant in all the treatments. The different treatments were evaluated after 0, 8, and 12 days by taking 50 mL of sample from each bioreactor. The chromium concentration was subsequently determined in each sample. The results show that treatment 3 (1% molasses and pH 4) showed higher chromium removal after both 8 and 12 days. The concentrations of total chromium decreased from 665 mg/mL to values of 568 mg/mL by day 8 and 486 mg/mL by day 12. These values are, however, still above the maximum threshold imposed by Peruvian law regarding the discharge of non-domestic effluents into the sewage system. The results show that Trichoderma spp. can increasingly remove chromium from the effluent with longer incubation periods. However, future studies are necessary to determine the mechanisms of chromium biosorption by the fungus and the influence of other physicochemical parameters. [ABSTRACT FROM AUTHOR]

Fruit waste has increased exponentially worldwide, within which tangerine is one of those that generates a greater amount of organic waste, which is currently not fully used. On the other hand, microbial fuel cells (MFCs) are presented as an opportunity to take advantage of organic waste to generate electricity, which is why the main objective of this research is to generate bioelectricity using tangerine waste as a substrate in microbial fuel cells using zinc and copper electrodes. It was possible to generate current and voltage peaks of 1.43973 ± 0.05568 mA and 1.191 ± 0.035 V on days eighteen and seventeen, respectively, operating with an optimum pH of 4.78 ± 0.46 and with electrical conductivity of the substrate of 140.07 ± 3.51 mS/cm, while the Brix degrees gradually decreased until the last day. The internal resistance determined was 65.378 ± 1.967 Ω, while the maximum power density was 475.32 ± 24.56 mW/cm2 at a current density of 5.539 A/cm2 with a peak voltage of 1024.12 ± 25.16 mV. The bacterium (Serratia fonticola) and yeasts (Rhodotorula mucilaginosa) were identified in the substrate with an identity of 99.57 and 99.50%, respectively. Finally, the cells were connected in series, managing to generate 3.15 V, which allowed the turning on of a red LED light. [ABSTRACT FROM AUTHOR]

The increase in the population and its need to produce food has caused the level of contamination by organic waste to increase exponentially in recent years. Innovative methods have been proposed for the use of this waste and thus to mitigate its impact. One of these is to use it as fuel in microbial fuel cells to generate electricity. This research aims to generate bioelectricity using coriander waste in microbial fuel cells. The maximum voltage and current observed were 0.882 ± 0.154 V and 2.287 ± 0.072 mA on the seventh and tenth day, respectively, these values were obtained working at an optimum operating pH of 3.9 ± 0.16 and with an electrical conductivity of 160.42 ± 4.54 mS/cm. The internal resistance observed in the cells was 75.581 ± 5.892 Ω, with a power density of 304.325 ± 16.51 mW/cm2 at 5.06 A/cm2 current density. While the intensity of the final FTIR (Fourier transform infrared spectroscopy) spectrum peaks decreased compared to the initial one, likewise, with a percentage of identity, it was possible to attribute 98.97, 99.39, and 100% to the species Alcaligenes faecalis, Alcaligenes faecali, and Pseudomonas aeruginosa. Finally, the cells were connected in series, managing to turn on an LED light (red) with the 2.61 V generated. This research provides an innovative and environmentally friendly way that companies and farmers can use to reuse their waste. [ABSTRACT FROM AUTHOR]

The biosorption of arsenic (As) with macroalgae has aroused much interest as a clean and low-cost technology. To evaluate arsenic biosorption by Chondracanthus chamissoi and Cladophora sp., approximately 5 kg of algae was collected from Huanchaco's beach and Sausacocha lake (Huamachuco), La Libertad. As biosorption was carried out in four column systems, with 2 g of algae pellets each, circulating As solutions of 0.25 and 1.25 ppm, respectively, at 300 mL/min cm2. As concentration was determined at 3 and 6 h of treatment by flame atomic absorption spectrophotometry. Data were analyzed using Student's t-test with 95% confidence. At 6 h, Chondracanthus chamissoi presented an As biosorption of 95.76% in a 0.25 ppm mg/L solution and 85.33% in a 1.25 mg/L solution. Cladophora sp., at 6 h, presented an As biosorption of 95.76% in a 0.25 mg/L solution and 42.03% in a 1.25 mg/L solution. It was concluded that Chondracanthus chamissoi achieves higher percentages of biosorption than Cladophora sp. in solutions of 1.25 mg/L As (p < 0.05), and that there is no significant difference between the biosorption percentages of Chondracanthus chamissoi and Cladophora sp. in a 0.25 mg/L solution of As at 6 h of treatment (p > 0.05). [ABSTRACT FROM AUTHOR]

Global warming and the increase in organic waste from agro-industries create a major problem for the environment. In this sense, microbial fuel cells (MFC) have great potential for the generation of bioelectricity by using organic waste as fuel. This research produced low-cost MFC by using zinc and copper electrodes and taking blueberry waste as fuel. A peak current and voltage of 1.130 ± 0.018 mA and 1.127 ± 0.096 V, respectively, were generated. The pH levels were acid, with peak conductivity values of 233. 94 ± 0.345 mS/cm and the degrees Brix were descending from the first day. The maximum power density was 3.155 ± 0.24 W/cm2 at 374.4 mA/cm2 current density, and Cándida boidinii was identified by means of molecular biology and bioinformatics techniques. This research gives a new way to generate electricity with this type of waste, generating added value for the companies in this area and helping to reduce global warming. [ABSTRACT FROM AUTHOR]