Search

Purpose This study aims to investigate the production of scaffolds by selective laser sintering (SLS) using poly(vinyl alcohol) (PVA) polymer, for in vitro studies, a relatively new and growing area in which scaffolds could be used in the design of three-dimensional models for in vitro disease model or tissue equivalent for safety and effectiveness tests. Design/methodology/approach The influence of the SLS process parameters laser power, 26 W and 32 W, and number of laser scans, 1, 2, 4 and 6, on the surface microstructure of the samples and on the degree of crystallinity and chemical stability of PVA material, was investigated using powder with particle size of 20-320 µm. Laser sintered PVA samples were subjected to cell culture tests using osteoblastic cells derived from human osteosarcoma (SaOs-2). Findings The laser power has no significant influence on the microstructure of the laser-sintered samples, however the number of scans has a considerable influence on the sintering degree; the SLS process causes a decrease in the degree of crystallinity and changes the chemical structure of the as-received PVA, especially when using higher laser power and more number of scans. Preliminary in vitro cell culture tests show that the laser-sintered PVA material is biocompatible with SaOs-2 cells. Originality/value SLS offers good potential for the fabrication of scaffolds and thus, may be applied as an alternative to conventional scaffold fabrication processes to overcome their limitations.

The cost of a part manufactured by electrical dischargeEDM machining (EDM) is mainly determined by electrode cost. The production of electrodes by conventional machining processes is complex, time consuming, and can account for over 50 % of the total EDM process costs. The emerging additive manufacturing (AM) technologies provide the possibility of direct fabrication of EDM electrodes. Selective laser sintering (SLS) is an alternative AM technique because it has the possibility to directly produce functional components, reducing the tool-room lead time and total EDM costs. The main difficulty of manufacturing an EDM electrode using SLS is the selection of an appropriate material, once both processes require different material properties. The current work focused on the investigation of appropriate materials that fulfill EDM and SLS process demands. Three new metal-matrix materials composed of Mo–CuNi, TiB2–CuNi, and ZrB2–CuNi were developed and characterized. Electrodes under adequate SLS conditions were manufactured through a systematic methodology. EDM experiments using different discharge energies were carried out, and the performance evaluated in terms of material removal rate and volumetric relative wear. The results showed that the powder systems composed of Mo–CuNi, TiB2–CuNi, and ZrB2–CuNi revealed to be successfully processed by SLS, and the EDM experiments demonstrated that the new composite electrodes are promising materials. The work also suggests important topics for future research work on this field.

Purpose – This work is focused on the investigation of direct production of electrical discharge machining (EDM) electrodes through the selective laser sintering (SLS) technique using a new metal-matrix composite material made of molybdenum and a copper-nickel alloy (Mo-CuNi). The influence and optimization of the main SLS parameters on the densification behavior and porosity is experimentally studied. Additionally, EDM experiments are performed to evaluate the electrodes performance under different machining conditions. The paper aims to discuss these issues. Design/methodology/approach – The new EDM electrode material used was a powder system composed of Mo and pre-alloyed CuNi. A systematic experimental methodology was designed to evaluate the effects of layer thickness, laser scan speed and hatch distance. The densification behavior, porosity and surface morphology of the samples were analyzed through microstructural and surface analysis. EDM experiments were conducted under three different regimes in order to observe the electrodes behavior and performance. The results were compared with copper powder electrodes manufactured by SLS and solid copper electrodes EDMachined under the same conditions. Findings – The experimental results showed that the direct SLS manufacturing of composite electrodes is feasible and an adequate combination of parameters can produce parts with good quality. The laser scan speed has a great effect on the densification behavior of the samples, while the effect of hatch distance on the porosity is more visible when the overlapping degree is considered. The overlapping also had a significant effect on the surface morphology. The EDM results showed that the Mo-CuNi electrodes had superior performance to the copper powder electrodes made by SLS for all the EDM regimes applied, but inferior to those achieved with solid copper electrodes. Originality/value – Significant results on the direct SLS manufacturing of a new material which has a great technological potential to be used as an EDM electrode material are presented. Valuable guidelines are given in regard to the SLS optimization of Mo-CuNi material and its performance as an EDM electrode. This work also provides a systematic methodology designed to be applied to the SLS process to produce EDM electrodes.