Search

The aim of this study was to develop functional composite edible films or coatings for fruit preservation by the addition of bioactive components in combinations that have not yet been thoroughly studied, according to the relevant literature. Edible films were initially composed of (i) chitosan (CH), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5% ratio), and (ii) hydroxypropyl methylcellulose (HPMC), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5% ratio). The bioactive components incorporated (5, 10 and 15% v/v) were as follows: (i) pomace oil-based nanoemulsion (NE) aiming to enhance barrier properties, and (ii) caffeine (C), aiming to enhance the antioxidant activity of films, respectively. Indeed, NE addition led to very high barrier properties (low oxygen and water vapor permeability), increased flexibility and reduced color. Furthermore, the contribution of these coatings to fresh strawberries’ preservation under cold storage was investigated, with very promising results concerning weight loss, color difference, and preservation of fruit moisture and quantity of O2 and CO2 inside the packages. Additionally, C addition led to very high antioxidant activity, reduced color and improved barrier properties. Finally, the contribution of these coatings to avocado’s preservation under cold storage was investigated, with very encouraging results for color difference, hardness and peroxide value of the fruit samples.

Condition assessment of works of art created with oil media on paper could be a complex matter when presenting problems of damage due to the absorption of oil binders by the paper support, since they depend on several factors and occur in variable conditions. The present work refers to the results of an investigation on the effect of linseed oils on the color, opacity, morphology, tensile strength, and chemical properties of lignocellulosic papers, in comparison to that of pure cellulosic papers. Lignocellulosic papers are involved in research on new, yet significant, parameters that might influence the behavior of the oil-impregnated areas of the supports upon aging. The research was applied to mock-ups, made of two types of lignocellulosic paper impregnated with three types of linseed oil and subjected to accelaratated ageing in specific conditions of relative humidity and temperature in closed environment. The research involved colorimetry, opacity, tensile strength, pH measurements, SEM, FTIR, and VOC analysis with GC-MS. The results indicated that thermal-humid ageing caused the gradual darkening of the oil-impregnated mock-ups, alterations in opacity, and decrease of pH values, depending mainly on the formulation of linseed oil, as well as a reduction in tensile strength. FTIR analysis results indicated that the chemical changes that occur upon ageing supported the recorded optical and mechanical alterations, while VOC emissions are both associated with the paper type and the kinetics of degradation of the different types of linseed oil.

The aim of this study was to examine the potential enhancement of the antimicrobial activity of edible films, composed of (i) chitosan (CH), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5%) and (ii) hydroxypropyl methylcellulose (HPMC), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5%), with silver nanoparticle (AgNP) incorporationat levels 5, 10 and 15% v/v. According to the results, the AgNP addition led to very high antimicrobial activity of both films, reducing by more than 96% the microbial growth of the Gram-negative bacterium Escherichia coli (E. coli) in all cases. On the other hand, by adding AgNPs to films, their thickness as well as oxygen and water vapor permeability decreased, while their transparency increased. Furthermore, the contribution of these specific edible films to preserve cherries under cold storage was investigated. All edible coatings resulted in an improvement of the fruit properties under consideration, and especially the color difference, hardness and total microbial load.

Oil media on paper, such as oil paintings, sketches, prints, and books, occasionally present problems associated with the effect of oil medium on the paper support, raising a composite matter of condition assessment as it depends on several factors. The present work examines the effect of linseed oil on paper and, in particular, the changes caused by three types of linseed oil on the optical, morphological, mechanical, and chemical properties of pure cellulosic paper, employing mock-ups submitted to artificial ageing in controlled conditions of relative humidity and temperature in airtight vessels. The study involved colorimetry, opacity, tensile strength, pH measurements, SEM, FTIR, and VOC analysis with GC-MS. Processing of the results has so far indicated that thermal-humid ageing caused the gradual darkening of the oil-impregnated mock-ups, as well as alterations in opacity, intense fall of pH values, and severe reductions in tensile strength, while linseed oil processing during manufacture has a significant impact. FTIR spectra have indicated that chemical changes upon ageing are in accordance with those of optical and mechanical changes, while VOC emissions are mostly associated with the drying and degradation of the different types of linseed oil.

Natural deep eutectic solvents (NADES) composed of choline chloride with maltose (CMA), glycerol (CGL), citric (CCA) and lactic acid (CLA) combined with microwave (MAE), ultrasound (UAE), homogenate (HAE) and high hydrostatic pressure (HHPAE)-assisted extraction methods were applied to recover and compare olive leaf phenolic compounds. The resultant extracts were evaluated for their total phenol content (TPC), phenolic profile and antioxidant activity and compared with those of water and ethanol:water 70% v/v extracts. HAE was proven to be the most efficient method for the recovery of olive leaf phenolic compounds. The highest TPC (55.12 ± 1.08 mg GAE/g d.w.) was found in CCA extracts after HAE at 60 °C and 12,000 rpm, and the maximum antioxidant activity (3.32 ± 0.39 g d.w./g DPPH) was found in CGL extracts after UAE at 60 °C for 30 min. The TPCs of ethanol extracts were found to be higher than those of NADES extracts in most cases. The predominant phenolic compounds in the extracts were oleuropein, hydrohytyrosol and rutin.

The aim of this study was to produce innovative edible films and coatings with various combinations of materials, in order to achieve the best possible resulting properties. More specifically, the effect of cellulose nanocrystals (CNC) or beta-cyclodextrin (CD) addition to chitosan (CH) films and the development of composite CH–CNC–CD films were investigated. According to the results, most properties of both CH–CNC and CH–CD edible films were improved. The viscosity of the solutions was decreased up to 50% while the surface tension was minimally changed even at high levels of CNC or CD addition. Furthermore, oxygen and water vapor permeability of the CH–CNC and the CH–CD edible films was decreased, whereas transparency and heterogeneity were increased. On the other hand, the study of the composite CH–CNC–CD films, showed that CNC improved viscosity, supporting thus the coating procedure. Moreover, CNC led to more stable structures with enhanced mechanical properties. Finally, CD mostly contributed to the improvement of the optical properties (lighter color and increased transparency).

Olive pomace, the solid by-product derived from olive oil production consists of a high concentration of bioactive compounds with antioxidant activity, such as phenolic compounds, and their recovery by applying innovative techniques is a great opportunity and challenge for the olive oil industry. This study aimed to point out a new approach for the integrated valorization of olive pomace by extracting the phenolic compounds and protecting them by encapsulation or incorporation in nanoemulsions. Innovative assisted extraction methods were evaluated such as microwave (MAE), homogenization (HAE), ultrasound (UAE), and high hydrostatic pressure (HHPAE) using various solvent systems including ethanol, methanol, and natural deep eutectic solvents (NADESs). The best extraction efficiency of phenolic compounds was achieved by using NADES as extraction solvent and in particular the mixture choline chloride-caffeic acid (CCA) and choline chloride-lactic acid (CLA); by HAE at 60 °C/12,000 rpm and UAE at 60 °C, the total phenolic content (TPC) of extracts was 34.08 mg gallic acid (GA)/g dw and 20.14 mg GA/g dw for CCA, and by MAE at 60 °C and HHPAE at 600 MPa/10 min, the TPC was 29.57 mg GA/g dw and 25.96 mg GA/g dw for CLA. HAE proved to be the best method for the extraction of phenolic compounds from olive pomace. Microencapsulation and nanoemulsion formulations were also reviewed for the protection of the phenolic compounds extracted from olive pomace. Both encapsulation techniques exhibited satisfactory results in terms of encapsulation stability. Thus, they can be proposed as an excellent technique to incorporate phenolic compounds into food products in order to enhance both their antioxidative stability and nutritional value.

The aim of this study was to encapsulate the steviol glycosides (SGs), derived from Stevia rebaudiana (Bert) Bertoni leaves, by applying a spray-drying method. The purpose was to minimize the bitter aftertaste of the SGs as well as to ameliorate/improve their properties. The encapsulation agents used were maltodextrin (19 DE) and inulin in a ratio of 80 : 20, while three levels of SGs in total solids (1.5, 2.5 and 3.5 %) were studied. The encapsulated SGs products were evaluated for their hygroscopicity, solubility, moisture content and microencapsulation efficiency (MEE %). Also, syrups prepared with encapsulated SGs, at 1 % w/v, were tested for their viscosity, refractive index, turbidity and sensory properties. Significant differences (P

The aim of this study was to enhance the quality and sensory characteristics of bread made from frozen dough. Both white and whole-wheat flour were used. In order to improve dough strength and stability during frozen storage, samples were supplemented with vital wheat gluten at the levels of 2%, 4%, 5%, and 6% of flour weight. The characteristics of baked samples were determined through weight loss, specific volume, crust, and crumb color, texture, and sensory evaluation. Dough behavior at sub-zero temperatures was further examined for control samples and samples with 6% gluten using Differential Scanning Calorimetry (DSC), while their low molecular sugar content (fructose, glucose, sucrose) was measured using High Pressure Liquid Chromatography (HPLC), as it can be associated with yeast viability and dough freezing point depression. The most stable samples were those with 4% and 6% gluten (for white flour) and those with 4% and 5% gluten (for whole-wheat flour). Gluten addition raised the freezing point of dough samples and preserved low molecular sugar generation after prolonged storage.